[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"fda-warning-letters-search:[\"Abbott Medical Optics, Inc.\",\"\",\"\",\"\",\"\",1]":3,"fda-latest-sync-dates":208},{"warningLetters":4,"total":207},[5,32,54,76,95,116,134,151,170,187],{"id":6,"raw":7,"subject":12,"body_html":14,"body_text":15,"firm_name":16,"letter_id":17,"created_at":18,"fei_number":19,"letter_url":20,"updated_at":21,"action_type":22,"case_status":23,"posted_date":24,"marcs_cms_no":25,"product_type":26,"closeout_date":19,"issuing_office":11,"recipient_name":27,"body_fetched_at":28,"delivery_method":29,"recipient_title":19,"reference_number":30,"action_taken_date":31,"medical_device_id":19,"response_letter_date":19},735,[8,9,10,11,12,13,13,13],"\u003Ctime datetime=\"2025-08-05T04:00:00Z\">08\u002F05\u002F2025\u003C\u002Ftime>\n","\u003Ctime datetime=\"2025-07-15T04:00:00Z\">07\u002F15\u002F2025\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Foasis-medical-inc-707198-07152025\">Oasis Medical, Inc.\u003C\u002Fa>","Center for Drug Evaluation and Research (CDER)","CGMP\u002FFinished Pharmaceuticals\u002FAdulterated","","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>Via Email\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n              \u003Cdt>Reference #:\u003C\u002Fdt> \n        \u003Cdd>320-25-93\u003C\u002Fdd>\n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Drugs                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Mr. Norman Craig Delgado\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>President and CEO\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Oasis Medical, Inc.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>514 S. Vermont Avenue\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Glendora\u003C\u002Fspan>, \u003Cspan>CA\u003C\u002Fspan> \u003Cspan>91741\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Drug Evaluation and Research (CDER)\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>Warning Letter\u003C\u002Fstrong> 320-25-93\u003C\u002Fp>\u003Cp>July 15, 2025\u003C\u002Fp>\u003Cp>Dear Mr. Delgado:\u003C\u002Fp>\u003Cp>The United States Food and Drug Administration (FDA) inspected your drug manufacturing facilities, Oasis Medical, Inc., FEI 2083373, at 514 S. Vermont Avenue, Glendora, from January 15 to 27, 2025.\u003C\u002Fp>\u003Cp>This warning letter summarizes significant violations of Current Good Manufacturing Practice (CGMP) regulations for finished pharmaceuticals. See Title 21 Code of Federal Regulations (CFR), parts 210 and 211 (21 CFR parts 210 and 211).\u003C\u002Fp>\u003Cp>Because your methods, facilities, or controls for manufacturing, processing, packing, or holding do not conform to CGMP, your drug products are adulterated within the meaning of section 501(a)(2)(B) of the Federal Food, Drug, and Cosmetic Act (FD&amp;C Act), 21 U.S.C. 351(a)(2)(B).\u003C\u002Fp>\u003Cp>We reviewed your February 17, 2025 response to our Form FDA 483 in detail and acknowledge receipt of your subsequent correspondence.\u003C\u002Fp>\u003Cp>During our inspection, our investigators observed specific violations including, but not limited to, the following.\u003C\u002Fp>\u003Cp>\u003Cstrong>1. Your firm failed to establish adequate written procedures for production and process control designed to assure that the drug products you manufacture have the identity, strength, quality, and purity they purport or are represented to possess (21 CFR 211.100(a)).\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Your firm failed to ensure the use of reproducible manufacturing processes for the production of sterile ophthalmic drug products. You also lacked an ongoing program to establish stable manufacturing operations, monitor ongoing process control, and provide for consistent drug quality. For example,\u003C\u002Fp>\u003Cul>\u003Cli>Your process lacked adequate control and is prone to producing an excessive number of defective units. A substantial portion of batches have been rejected, including total reject levels \u003Cstrong>(b)(4)\u003C\u002Fstrong> in a number of cases. Of special concern are the excessive number of defective products due to visible particulate contamination (e.g., recurring instances of levels greater than \u003Cstrong>(b)(4)\u003C\u002Fstrong>). Batches with very high defect levels were nonetheless distributed.\u003C\u002Fli>\u003Cli>You failed to establish and follow an adequate visual inspection program for the ophthalmic drugs manufactured by your firm.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>There was no classification as to the severity of the defects (i.e., critical, major, minor) or limit for the number of defects allowed, if any.\u003C\u002Fp>\u003Cul>\u003Cli>The most recently completed requalification study for your \u003Cstrong>(b)(4)\u003C\u002Fstrong> cycle was conducted in 2023 and inadequately considered potential changes from previous qualifications and the original validation. The 2023 requalification did not include an assessment of \u003Cstrong>(b)(4)\u003C\u002Fstrong> maintenance or changes to the drug product components.\u003C\u002Fli>\u003Cli>The maximum duration of the hold steps in your manufacturing process (e.g., extensive hold times prior to \u003Cstrong>(b)(4)\u003C\u002Fstrong>) has not been validated.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Your response fails to address your lack of process capability, and the overreliance on visual inspection in an attempt to remove excessive defective units from batches.\u003C\u002Fp>\u003Cp>You do not commit to thoroughly investigate the root causes of the visible particulates and excessive occurrence of these critical defects. You also lack appropriate interim steps to prevent production of further batches from a low capability process while you make efforts to remediate it. In addition, the response lacks a commitment to address potentially contaminated products in distribution.\u003C\u002Fp>\u003Cp>Regarding the visual inspection program, your response lacks a commitment to perform a comprehensive reassessment of this program.\u003C\u002Fp>\u003Cp>Regarding production hold times, your response acknowledges that you have not performed validation of your hold steps. But you do not commit to validating all in-process hold times and include a date by which these studies will be completed.\u003C\u002Fp>\u003Cp>Process validation evaluates the soundness of design and state of control of a process through its lifecycle. Each significant stage of a manufacturing process must be designed appropriately to ensure the quality of raw material inputs, materials, and finished drugs. Process qualification studies determine whether an initial state of control has been established. Successful process qualification studies are necessary before commercial distribution. Thereafter, ongoing vigilant oversight of process performance and product quality are necessary to ensure you maintain a stable manufacturing operation throughout the product lifecycle.\u003C\u002Fp>\u003Cp>See FDA’s guidance document \u003Cem>Process Validation: General Principles and Practices\u003C\u002Fem> for general principles and approaches that FDA considers appropriate elements of process validation, at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F71021\u002Fdownload.\u003C\u002Fp>\u003Cp>In response to this letter, provide:\u003C\u002Fp>\u003Cul>\u003Cli>A detailed retrospective review and assessment of your \u003Cstrong>(b)(4)\u003C\u002Fstrong> program. The retrospective review and assessment should include all changes to the drug product, container closure system, and packaging (e.g., canula sheath); and an evaluation of changes to, and maintenance of, the \u003Cstrong>(b)(4)\u003C\u002Fstrong> equipment. If changes are identified, provide your plan to evaluate the safety and quality of distributed finished products that remain within expiry and a plan to ensure the safety and quality of your drug products until the \u003Cstrong>(b)(4)\u003C\u002Fstrong> process is successfully validated.\u003C\u002Fli>\u003Cli>Thorough investigation(s), including corrective actions and preventive actions (CAPA), regarding finished product batches manufactured and released for distribution despite high numbers of rejected units.\u003C\u002Fli>\u003Cli>Complete results of your examination of retains\u002Freserve samples for all batches from January 2023 to present for defects, and any related investigation(s) and corrective actions.\u003C\u002Fli>\u003Cli>A list of all batches since January 1, 2023, to present, with the following information:\u003Cbr>o Product name\u003Cbr>o Batch number\u003Cbr>o Date of manufacture\u003Cbr>o Date of expiration\u003Cbr>o Batch size (original quantity of theoretical syringes)\u003Cbr>o Actual batch yield (number of pouched syringe units)\u003Cbr>o Number of rejects due to particulates\u003Cbr>o Number of rejects due to other defects (include the top 3 other defect types for each batch, beyond particulate defects)\u003Cbr>o Percent yield\u003C\u002Fli>\u003Cli>A remediation plan that better assures ongoing management oversight throughout the manufacturing lifecycle of all drug products. Provide a more data-driven and scientifically sound program that identifies sources of process variability, and assures that manufacturing (including both production and packaging) operations meet appropriate parameters and quality standards. This includes, but is not limited to, evaluating suitability of equipment for its intended use, ensuring quality of input materials, determining the capability and reliability of each manufacturing process step and its controls, and vigilant ongoing monitoring of process performance and product quality.\u003C\u002Fli>\u003Cli>A comprehensive, independent assessment and remediation plan for systems used in the visual inspection of sterile drugs for defects (including but not limited to particulate matter). The assessment should include adequacy of inspection methods, acceptance and rejection criteria, personnel training, supervision, equipment and personnel qualification, equipment maintenance, and the procedures governing them. Provide your detailed remediation action plan that includes dates by which each remediation activity will be completed, and provisions for periodic independent reassessment of the plan’s effectiveness.\u003C\u002Fli>\u003Cli>A detailed summary of your validation program for ensuring a state of control throughout the product lifecycle, along with associated procedures. Describe your program for process performance qualification (PPQ), and ongoing monitoring of both intra-batch and inter-batch variation to ensure a continuing state of control. Also, summarize the program for qualification of your equipment and facility.\u003C\u002Fli>\u003Cli>Timelines for completing further PPQ studies on remediated processes for marketed drug products for which a state of control has not been adequately established.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>2. Your firm failed to thoroughly investigate any unexplained discrepancy or failure of a batch or any of its components to meet any of its specifications, whether or not the batch has already been distributed (21 CFR 211.192).\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Your firm lacked meaningful investigations of failed sterility and bioburden test results. For example:\u003C\u002Fp>\u003Cp>\u003Cem>Sterility Failure\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Your quality unit (QU) did not adequately investigate a failed sterility test result for your \u003Cstrong>(b)(4)\u003C\u002Fstrong> drug product, VISCO SHIELD Topical Drops, lot V0724N. Your external testing laboratory performs two sterility tests: one for the contents within the syringe and the other for the sterility of the syringe and cap primary packaging components. Your external testing laboratory reported a sterility failure for the syringe and cap portion of the testing. You concluded in NCR 24014 that, because the contaminant was found only on the syringe and cap and not the contents of the syringe, the likely root cause of the sterility failure was laboratory contamination due to excessive handling during the test. However, your contract testing laboratory’s investigation concluded that there was no laboratory error. You failed to resolve the conflicting root cause conclusions and did not extend your investigation to other potential sources of contamination or ensure it was of appropriate scope. Although the batch remained under your control, your QU had dispositioned this batch “USE AS IS” on September 30, 2024, to be distributed to the U.S. market.\u003C\u002Fp>\u003Cp>In your response to the sterility failure, we acknowledge your intention to create a specific procedure to address external laboratory out-of-specification (OOS) investigations. However, your investigation failed to consider conditions that led to the sterility failure or determine potential root causes to ensure effective CAPAs were promptly initiated. Additionally, you do not adequately address the potential non-integrity failure mode of the packaged finished drug product (e.g., breach in packaging integrity following \u003Cstrong>(b)(4)\u003C\u002Fstrong>).\u003C\u002Fp>\u003Cp>\u003Cem>Bioburden OOS\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Your firm did not adequately investigate your firm’s pre-sterilization bioburden results that exceeded their specifications (\u003Cstrong>(b)(4)\u003C\u002Fstrong>) for VISCO SHIELD Topical Drops, lot V0724G. One sample exceeded the specification for the aerobic plate count test with a result of 570 CFU\u002Fsample and another sample exceeded the specification for the yeast and mold count test with a result of 334 CFU\u002Fsample.\u003C\u002Fp>\u003Cp>In your response to the bioburden OOS, your investigation fails to consider the conditions that led to the OOS. You do not identify the microbes recovered or determine resistance of any spore-forming microbes that may have been present. You also do not address potential root causes during the production process that could contribute to excess bioburden. Assessment of the number of types of microbes in pre-sterilization bioburden helps to determine whether the validated \u003Cstrong>(b)(4)\u003C\u002Fstrong> process continues to be capable of rendering the finished product sterile.\u003C\u002Fp>\u003Cp>Whenever an investigation lacks conclusive evidence of laboratory error, a thorough investigation of potential manufacturing causes must be performed.\u003C\u002Fp>\u003Cp>For more information about handling failing, OOS, out-of-trend, or other unexpected results and documentation of your investigations, see FDA’s guidance document \u003Cem>Investigating Out-of-Specification (OOS) Test Results for Pharmaceutical Production\u003C\u002Fem> at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F158416\u002Fdownload. While this guidance generally applies to chemistry-based laboratory testing, many of the principles are relevant to microbiological testing.\u003C\u002Fp>\u003Cp>In response to this letter, provide:\u003C\u002Fp>\u003Cul>\u003Cli>The disposition status of the referenced batch, VISCO SHIELD Topical Drops, lot V0724N. If the lot was released for distribution, provide the dates of release and distribution.\u003C\u002Fli>\u003Cli>A comprehensive, independent assessment of your overall system for investigating deviations, discrepancies, complaints, OOS results, and failures. Provide a detailed action plan to remediate this system. Your action plan should include, but not be limited to, significant improvements in investigation competencies, scope determination, root cause evaluation, CAPA effectiveness, QU oversight, and written procedures. Address how your firm will ensure all phases of investigations are appropriately conducted.\u003C\u002Fli>\u003Cli>An independent assessment and remediation plan for your CAPA program. Provide a report that evaluates whether the program includes effective root cause analysis, ensures CAPA effectiveness, analyzes investigations trends, improves the CAPA program when needed, implements final QU decisions, and is fully supported by executive management.\u003C\u002Fli>\u003Cli>A retrospective, independent review of all invalidated OOS (including in-process and release\u002Fstability testing) results for US products within expiry as of the date of this letter and a report summarizing the findings of the analysis, including the following for each OOS:\u003Cbr>o Determine whether the scientific justification and evidence relating to the invalidated OOS result conclusively or inconclusively demonstrates causative laboratory error.\u003Cbr>o For investigations that conclusively establish laboratory root cause, provide rationale and ensure that all other laboratory methods vulnerable to the same or similar root cause are identified for remediation.\u003Cbr>o For all OOS results found by the retrospective review to have an inconclusive or no root cause identified in the laboratory, include a thorough review of production (e.g., batch manufacturing records, adequacy of the manufacturing steps, suitability of equipment\u002Ffacilities, variability of raw materials, process capability, deviation history, complaint history, batch failure history). Provide a summary of potential manufacturing root causes for each investigation, and any manufacturing operation improvements.\u003C\u002Fli>\u003Cli>A comprehensive review and remediation plan for your OOS result investigation systems. The CAPA should include, but not be limited to, addressing the following:\u003Cbr>o QU oversight of laboratory investigations.\u003Cbr>o Identification of adverse laboratory control trends.\u003Cbr>o Resolution of causes of laboratory variation.\u003Cbr>o Initiation of thorough investigations of potential manufacturing causes whenever a laboratory cause cannot be conclusively identified.\u003Cbr>o Adequately scoping of each investigation and its CAPA.\u003Cbr>o Revised OOS investigation procedures with these and other remediations.\u003C\u002Fli>\u003Cli>A detailed retrospective review and assessment of your \u003Cstrong>(b)(4)\u003C\u002Fstrong> program. The retrospective review and assessment should include:\u003Cbr>o All changes to the drug product, container closure system, and packaging (e.g., canula sheath).\u003Cbr>o An evaluation of changes to, and maintenance of, the \u003Cstrong>(b)(4)\u003C\u002Fstrong> equipment.\u003Cbr>o A plan to evaluate the safety and quality of distributed finished products that remain within expiry if significant changes occurred that may pose a risk to quality or safety.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>3. Your firm failed to establish laboratory controls that include scientifically sound and appropriate specifications, standards, sampling plans, and test procedures designed to assure that components, drug product containers, closures, in-process materials, labeling, and drug products conform to appropriate standards of identity, strength, quality, and purity. You also failed to establish and follow an adequate written testing program designed to assess the stability characteristics of drug products and to use results of stability testing to determine appropriate storage conditions and expiration dates (21 CFR 211.160(b)) and (21 CFR 211.166(a)).\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>\u003Cem>Finished Product Testing\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Your finished product testing for release of ophthalmic drug product batches did not include adequate analytical testing to determine the identification or assay of the active ingredient, hydroxypropyl methylcellulose (Hypromellose).\u003C\u002Fp>\u003Cp>Your response and subsequent updates are inadequate. You commit to updating your finished product specifications. However, you reference an internally-developed, non-specific method for assay (strength) without providing adequate documentation and scientific justification to support its use. In contrast, a method is available in the USP that employs a reference standard and spectrophotometric measurements to determine Hypromellose assay.\u003C\u002Fp>\u003Cp>\u003Cem>Stability Program\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Your firm lacked an adequate stability program to support the \u003Cstrong>(b)(4)\u003C\u002Fstrong> expiration date. For example:\u003C\u002Fp>\u003Cul>\u003Cli>Your firm did not establish appropriate tests and specifications for your ophthalmic drug products to monitor the active ingredient identity or assay at release and throughout expiry. Your stability program did not include an adequate test for assay of the active ingredient, hydroxypropyl methylcellulose (Hypromellose). In place of the USP assay, your firm used an in-house method based on loss-on-drying without scientific justification.\u003C\u002Fli>\u003Cli>Your firm did not follow your Operational Procedure,\u003Cem> Control, Testing, and Release of Drug Products\u003C\u002Fem>, which requires placement of samples from one commercial batch of each product on the stability program each year, and testing at \u003Cstrong>(b)(4)\u003C\u002Fstrong> intervals. Your 2023 batch was delayed in its entry to your stability program and your 2024 testing was not initiated. A similar pattern of non-compliance was noted during your 2018 inspection.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Your response is inadequate. You reference stability studies from batches made in 2013 and 2016 to justify reduced stability testing intervals. You fail to provide a root cause or an adequate CAPA to address the failure to follow your own stability procedure.\u003C\u002Fp>\u003Cp>Drug product batches must be tested for identity, strength, quality, and purity prior to release. Without sufficient release and ongoing stability testing, defective drug products that may pose a risk to consumers are unlikely to be detected.\u003C\u002Fp>\u003Cp>In response to this letter, provide:\u003C\u002Fp>\u003Cul>\u003Cli>The method validation protocol, report, and supporting data for your current Hypromellose assay method, and any revised methods. Include the scientific rationale for its use as release and stability indicating tests.\u003C\u002Fli>\u003Cli>A comprehensive independent assessment of your laboratory practices, procedures, methods, equipment, documentation, and analyst competencies. Based on this review, provide a detailed plan to remediate and evaluate the effectiveness of your laboratory system.\u003C\u002Fli>\u003Cli>A list of chemical and microbial specifications, including test methods, used to analyze each batch of your drug products before a batch disposition decision.\u003Cbr>o An action plan and timelines for conducting full chemical and microbiological testing of retain samples to determine the quality of all batches of drug product distributed to the United States that are within expiry as of the date of this letter.\u003Cbr>o A summary of all results obtained from testing retain samples from each batch. If such testing reveals substandard quality drug products, take rapid corrective actions, such as notifying customers and product recalls.\u003C\u002Fli>\u003Cli>A comprehensive, independent assessment and CAPA plan to ensure the adequacy of your stability program. Your remediated program should include, but not be limited to:\u003Cbr>o Stability indicating methods.\u003Cbr>o Stability studies for each drug product in its marketed container-closure system before distribution is permitted.\u003Cbr>o An ongoing program in which representative batches of each product are added each year to the program to determine if the shelf-life claim remains valid.\u003C\u002Fli>\u003Cli>All procedures that describe these and other elements of your remediated stability program.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>4. Your firm failed to establish an adequate quality unit and the responsibilities and procedures applicable to the quality control unit are not in writing and fully followed (21 CFR 211.22(a) and (d)).\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Your firm’s QU failed to adequately execute its responsibilities.\u003C\u002Fp>\u003Cp>This includes oversight of both internal and external manufacturing activities, including laboratory services.\u003C\u002Fp>\u003Cp>Regarding functions that occurred at your facility, the records and information you provided demonstrate that your QU did not effectively exercise its responsibilities to oversee the quality of your ophthalmic drug manufacturing operations. Your firm failed to follow established procedures. For example, you had not conducted annual product reviews since 2018, which was cited as an observation in a previous inspection. In addition, your firm did not conduct annual examinations of reserve samples for the past 2 years.\u003C\u002Fp>\u003Cp>Regarding external functions performed on your behalf, your ongoing oversight of critical contract services was insufficient.\u003C\u002Fp>\u003Cp>Your QU is responsible for fully exercising its authority and responsibilities. Our inspectional findings indicate that your QU is not conducting appropriate oversight of drug CGMP operations.\u003C\u002Fp>\u003Cp>Your response is inadequate. Although you commit to addressing the observations we identified, your response lacks detail on systemic remediations needed for your QU and your quality system.\u003C\u002Fp>\u003Cp>Your firm’s quality systems are inadequate. See FDA’s guidance document \u003Cem>Quality Systems Approach to Pharmaceutical CGMP Regulations\u003C\u002Fem> for help implementing quality systems and risk management approaches to meet the requirements of CGMP regulations 21 CFR, parts 210 and 211 at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F71023\u002Fdownload.\u003C\u002Fp>\u003Cp>In response to this letter, provide:\u003C\u002Fp>\u003Cul>\u003Cli>A comprehensive assessment and remediation plan to ensure your QU is given the authority and resources to effectively function. The assessment should also include, but not be limited to:\u003Cbr>o A determination of whether procedures used by your firm are robust and appropriate.\u003Cbr>o Detailed definition of the specific attributes to be tested at each station (timepoint).\u003Cbr>o Provisions for QU oversight throughout your operations to evaluate adherence to appropriate practices. o A complete and final review of each batch and its related information before the QU disposition decision.\u003Cbr>o Oversight and approval of investigations and discharging of all other QU duties to ensure identity, strength, quality, and purity of all products.\u003C\u002Fli>\u003Cli>Also describe how top management supports quality assurance and reliable operations, including but not limited to, timely provision of resources to proactively address emerging manufacturing\u002Fquality issues and to assure a continuing state of control.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>CGMP Consultant Recommended\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Based upon the nature of the violations we identified at your firm and because you failed to correct repeat violations, you should engage a consultant qualified as set forth in 21 CFR 211.34 to assist your firm in meeting CGMP requirements.\u003C\u002Fp>\u003Cp>Your use of a consultant does not relieve your firm’s obligation to comply with CGMP. Your firm’s executive management remains responsible for resolving all deficiencies and systemic flaws to ensure ongoing CGMP compliance.\u003C\u002Fp>\u003Cp>\u003Cstrong>Conclusion\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>The violations cited in this letter are not intended to be an all-inclusive list of violations that exist at your facility. You are responsible for investigating and determining the causes of any violations and for preventing their recurrence or the occurrence of other violations.\u003C\u002Fp>\u003Cp>Correct any violations promptly. Failure to promptly and adequately address this matter may result in regulatory or legal action without further notice including, without limitation, seizure and injunction. Unresolved violations may also prevent other Federal agencies from awarding contracts.\u003C\u002Fp>\u003Cp>Failure to address violations may also cause FDA to withhold issuance of Export Certificates. FDA may withhold approval of new applications or supplements listing your firm as a drug manufacturer until any violations are completely addressed and we confirm your compliance with CGMP. We may re-inspect to verify that you have completed corrective actions to address any violations.\u003C\u002Fp>\u003Cp>This letter notifies you of our findings and provides you an opportunity to address the above deficiencies. After you receive this letter, respond to this office in writing within 15 working days. Specify what you have done to address any violations and to prevent their recurrence. In response to this letter, you may provide additional information for our consideration as we continue to assess your activities and practices. If you cannot complete corrective actions within 15 working days, state your reasons for delay and your schedule for completion.\u003C\u002Fp>\u003Cp>Send your electronic reply to CDER-OC-OMQ-Communications@fda.hhs.gov. Identify your response with FEI 2083373 and ATTN: Carrie A. Hughes.\u003C\u002Fp>\u003Cp>Sincerely,\u003Cbr>\u002FS\u002F\u003C\u002Fp>\u003Cp>Francis Godwin\u003Cbr>Director\u003Cbr>Office of Manufacturing Quality\u003Cbr>Office of Compliance\u003Cbr>Center for Drug Evaluation and Research\u003C\u002Fp>\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVia Email\n\nReference #:\n\n320-25-93\n\nProduct:\n\nDrugs\n\nRecipient:\n\nRecipient Name\n\nMr. Norman Craig Delgado\n\nRecipient Title\n\nPresident and CEO\n\nOasis Medical, Inc.\n\n514 S. Vermont Avenue\n\nGlendora, CA 91741\n\nUnited States\n\nIssuing Office:\n\nCenter for Drug Evaluation and Research (CDER)\n\nUnited States\n\nWarning Letter 320-25-93\nJuly 15, 2025\nDear Mr. Delgado:\nThe United States Food and Drug Administration (FDA) inspected your drug manufacturing facilities, Oasis Medical, Inc., FEI 2083373, at 514 S. Vermont Avenue, Glendora, from January 15 to 27, 2025.\nThis warning letter summarizes significant violations of Current Good Manufacturing Practice (CGMP) regulations for finished pharmaceuticals. See Title 21 Code of Federal Regulations (CFR), parts 210 and 211 (21 CFR parts 210 and 211).\nBecause your methods, facilities, or controls for manufacturing, processing, packing, or holding do not conform to CGMP, your drug products are adulterated within the meaning of section 501(a)(2)(B) of the Federal Food, Drug, and Cosmetic Act (FD&C Act), 21 U.S.C. 351(a)(2)(B).\nWe reviewed your February 17, 2025 response to our Form FDA 483 in detail and acknowledge receipt of your subsequent correspondence.\nDuring our inspection, our investigators observed specific violations including, but not limited to, the following.\n1. Your firm failed to establish adequate written procedures for production and process control designed to assure that the drug products you manufacture have the identity, strength, quality, and purity they purport or are represented to possess (21 CFR 211.100(a)).\nYour firm failed to ensure the use of reproducible manufacturing processes for the production of sterile ophthalmic drug products. You also lacked an ongoing program to establish stable manufacturing operations, monitor ongoing process control, and provide for consistent drug quality. For example,\nYour process lacked adequate control and is prone to producing an excessive number of defective units. A substantial portion of batches have been rejected, including total reject levels (b)(4) in a number of cases. Of special concern are the excessive number of defective products due to visible particulate contamination (e.g., recurring instances of levels greater than (b)(4)). Batches with very high defect levels were nonetheless distributed.\nYou failed to establish and follow an adequate visual inspection program for the ophthalmic drugs manufactured by your firm.\nThere was no classification as to the severity of the defects (i.e., critical, major, minor) or limit for the number of defects allowed, if any.\nThe most recently completed requalification study for your (b)(4) cycle was conducted in 2023 and inadequately considered potential changes from previous qualifications and the original validation. The 2023 requalification did not include an assessment of (b)(4) maintenance or changes to the drug product components.\nThe maximum duration of the hold steps in your manufacturing process (e.g., extensive hold times prior to (b)(4)) has not been validated.\nYour response fails to address your lack of process capability, and the overreliance on visual inspection in an attempt to remove excessive defective units from batches.\nYou do not commit to thoroughly investigate the root causes of the visible particulates and excessive occurrence of these critical defects. You also lack appropriate interim steps to prevent production of further batches from a low capability process while you make efforts to remediate it. In addition, the response lacks a commitment to address potentially contaminated products in distribution.\nRegarding the visual inspection program, your response lacks a commitment to perform a comprehensive reassessment of this program.\nRegarding production hold times, your response acknowledges that you have not performed validation of your hold steps. But you do not commit to validating all in-process hold times and include a date by which these studies will be completed.\nProcess validation evaluates the soundness of design and state of control of a process through its lifecycle. Each significant stage of a manufacturing process must be designed appropriately to ensure the quality of raw material inputs, materials, and finished drugs. Process qualification studies determine whether an initial state of control has been established. Successful process qualification studies are necessary before commercial distribution. Thereafter, ongoing vigilant oversight of process performance and product quality are necessary to ensure you maintain a stable manufacturing operation throughout the product lifecycle.\nSee FDA’s guidance document Process Validation: General Principles and Practices for general principles and approaches that FDA considers appropriate elements of process validation, at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F71021\u002Fdownload.\nIn response to this letter, provide:\nA detailed retrospective review and assessment of your (b)(4) program. The retrospective review and assessment should include all changes to the drug product, container closure system, and packaging (e.g., canula sheath); and an evaluation of changes to, and maintenance of, the (b)(4) equipment. If changes are identified, provide your plan to evaluate the safety and quality of distributed finished products that remain within expiry and a plan to ensure the safety and quality of your drug products until the (b)(4) process is successfully validated.\nThorough investigation(s), including corrective actions and preventive actions (CAPA), regarding finished product batches manufactured and released for distribution despite high numbers of rejected units.\nComplete results of your examination of retains\u002Freserve samples for all batches from January 2023 to present for defects, and any related investigation(s) and corrective actions.\nA list of all batches since January 1, 2023, to present, with the following information:\no Product name\no Batch number\no Date of manufacture\no Date of expiration\no Batch size (original quantity of theoretical syringes)\no Actual batch yield (number of pouched syringe units)\no Number of rejects due to particulates\no Number of rejects due to other defects (include the top 3 other defect types for each batch, beyond particulate defects)\no Percent yield\nA remediation plan that better assures ongoing management oversight throughout the manufacturing lifecycle of all drug products. Provide a more data-driven and scientifically sound program that identifies sources of process variability, and assures that manufacturing (including both production and packaging) operations meet appropriate parameters and quality standards. This includes, but is not limited to, evaluating suitability of equipment for its intended use, ensuring quality of input materials, determining the capability and reliability of each manufacturing process step and its controls, and vigilant ongoing monitoring of process performance and product quality.\nA comprehensive, independent assessment and remediation plan for systems used in the visual inspection of sterile drugs for defects (including but not limited to particulate matter). The assessment should include adequacy of inspection methods, acceptance and rejection criteria, personnel training, supervision, equipment and personnel qualification, equipment maintenance, and the procedures governing them. Provide your detailed remediation action plan that includes dates by which each remediation activity will be completed, and provisions for periodic independent reassessment of the plan’s effectiveness.\nA detailed summary of your validation program for ensuring a state of control throughout the product lifecycle, along with associated procedures. Describe your program for process performance qualification (PPQ), and ongoing monitoring of both intra-batch and inter-batch variation to ensure a continuing state of control. Also, summarize the program for qualification of your equipment and facility.\nTimelines for completing further PPQ studies on remediated processes for marketed drug products for which a state of control has not been adequately established.\n2. Your firm failed to thoroughly investigate any unexplained discrepancy or failure of a batch or any of its components to meet any of its specifications, whether or not the batch has already been distributed (21 CFR 211.192).\nYour firm lacked meaningful investigations of failed sterility and bioburden test results. For example:\nSterility Failure\nYour quality unit (QU) did not adequately investigate a failed sterility test result for your (b)(4) drug product, VISCO SHIELD Topical Drops, lot V0724N. Your external testing laboratory performs two sterility tests: one for the contents within the syringe and the other for the sterility of the syringe and cap primary packaging components. Your external testing laboratory reported a sterility failure for the syringe and cap portion of the testing. You concluded in NCR 24014 that, because the contaminant was found only on the syringe and cap and not the contents of the syringe, the likely root cause of the sterility failure was laboratory contamination due to excessive handling during the test. However, your contract testing laboratory’s investigation concluded that there was no laboratory error. You failed to resolve the conflicting root cause conclusions and did not extend your investigation to other potential sources of contamination or ensure it was of appropriate scope. Although the batch remained under your control, your QU had dispositioned this batch “USE AS IS” on September 30, 2024, to be distributed to the U.S. market.\nIn your response to the sterility failure, we acknowledge your intention to create a specific procedure to address external laboratory out-of-specification (OOS) investigations. However, your investigation failed to consider conditions that led to the sterility failure or determine potential root causes to ensure effective CAPAs were promptly initiated. Additionally, you do not adequately address the potential non-integrity failure mode of the packaged finished drug product (e.g., breach in packaging integrity following (b)(4)).\nBioburden OOS\nYour firm did not adequately investigate your firm’s pre-sterilization bioburden results that exceeded their specifications ((b)(4)) for VISCO SHIELD Topical Drops, lot V0724G. One sample exceeded the specification for the aerobic plate count test with a result of 570 CFU\u002Fsample and another sample exceeded the specification for the yeast and mold count test with a result of 334 CFU\u002Fsample.\nIn your response to the bioburden OOS, your investigation fails to consider the conditions that led to the OOS. You do not identify the microbes recovered or determine resistance of any spore-forming microbes that may have been present. You also do not address potential root causes during the production process that could contribute to excess bioburden. Assessment of the number of types of microbes in pre-sterilization bioburden helps to determine whether the validated (b)(4) process continues to be capable of rendering the finished product sterile.\nWhenever an investigation lacks conclusive evidence of laboratory error, a thorough investigation of potential manufacturing causes must be performed.\nFor more information about handling failing, OOS, out-of-trend, or other unexpected results and documentation of your investigations, see FDA’s guidance document Investigating Out-of-Specification (OOS) Test Results for Pharmaceutical Production at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F158416\u002Fdownload. While this guidance generally applies to chemistry-based laboratory testing, many of the principles are relevant to microbiological testing.\nIn response to this letter, provide:\nThe disposition status of the referenced batch, VISCO SHIELD Topical Drops, lot V0724N. If the lot was released for distribution, provide the dates of release and distribution.\nA comprehensive, independent assessment of your overall system for investigating deviations, discrepancies, complaints, OOS results, and failures. Provide a detailed action plan to remediate this system. Your action plan should include, but not be limited to, significant improvements in investigation competencies, scope determination, root cause evaluation, CAPA effectiveness, QU oversight, and written procedures. Address how your firm will ensure all phases of investigations are appropriately conducted.\nAn independent assessment and remediation plan for your CAPA program. Provide a report that evaluates whether the program includes effective root cause analysis, ensures CAPA effectiveness, analyzes investigations trends, improves the CAPA program when needed, implements final QU decisions, and is fully supported by executive management.\nA retrospective, independent review of all invalidated OOS (including in-process and release\u002Fstability testing) results for US products within expiry as of the date of this letter and a report summarizing the findings of the analysis, including the following for each OOS:\no Determine whether the scientific justification and evidence relating to the invalidated OOS result conclusively or inconclusively demonstrates causative laboratory error.\no For investigations that conclusively establish laboratory root cause, provide rationale and ensure that all other laboratory methods vulnerable to the same or similar root cause are identified for remediation.\no For all OOS results found by the retrospective review to have an inconclusive or no root cause identified in the laboratory, include a thorough review of production (e.g., batch manufacturing records, adequacy of the manufacturing steps, suitability of equipment\u002Ffacilities, variability of raw materials, process capability, deviation history, complaint history, batch failure history). Provide a summary of potential manufacturing root causes for each investigation, and any manufacturing operation improvements.\nA comprehensive review and remediation plan for your OOS result investigation systems. The CAPA should include, but not be limited to, addressing the following:\no QU oversight of laboratory investigations.\no Identification of adverse laboratory control trends.\no Resolution of causes of laboratory variation.\no Initiation of thorough investigations of potential manufacturing causes whenever a laboratory cause cannot be conclusively identified.\no Adequately scoping of each investigation and its CAPA.\no Revised OOS investigation procedures with these and other remediations.\nA detailed retrospective review and assessment of your (b)(4) program. The retrospective review and assessment should include:\no All changes to the drug product, container closure system, and packaging (e.g., canula sheath).\no An evaluation of changes to, and maintenance of, the (b)(4) equipment.\no A plan to evaluate the safety and quality of distributed finished products that remain within expiry if significant changes occurred that may pose a risk to quality or safety.\n3. Your firm failed to establish laboratory controls that include scientifically sound and appropriate specifications, standards, sampling plans, and test procedures designed to assure that components, drug product containers, closures, in-process materials, labeling, and drug products conform to appropriate standards of identity, strength, quality, and purity. You also failed to establish and follow an adequate written testing program designed to assess the stability characteristics of drug products and to use results of stability testing to determine appropriate storage conditions and expiration dates (21 CFR 211.160(b)) and (21 CFR 211.166(a)).\nFinished Product Testing\nYour finished product testing for release of ophthalmic drug product batches did not include adequate analytical testing to determine the identification or assay of the active ingredient, hydroxypropyl methylcellulose (Hypromellose).\nYour response and subsequent updates are inadequate. You commit to updating your finished product specifications. However, you reference an internally-developed, non-specific method for assay (strength) without providing adequate documentation and scientific justification to support its use. In contrast, a method is available in the USP that employs a reference standard and spectrophotometric measurements to determine Hypromellose assay.\nStability Program\nYour firm lacked an adequate stability program to support the (b)(4) expiration date. For example:\nYour firm did not establish appropriate tests and specifications for your ophthalmic drug products to monitor the active ingredient identity or assay at release and throughout expiry. Your stability program did not include an adequate test for assay of the active ingredient, hydroxypropyl methylcellulose (Hypromellose). In place of the USP assay, your firm used an in-house method based on loss-on-drying without scientific justification.\nYour firm did not follow your Operational Procedure, Control, Testing, and Release of Drug Products, which requires placement of samples from one commercial batch of each product on the stability program each year, and testing at (b)(4) intervals. Your 2023 batch was delayed in its entry to your stability program and your 2024 testing was not initiated. A similar pattern of non-compliance was noted during your 2018 inspection.\nYour response is inadequate. You reference stability studies from batches made in 2013 and 2016 to justify reduced stability testing intervals. You fail to provide a root cause or an adequate CAPA to address the failure to follow your own stability procedure.\nDrug product batches must be tested for identity, strength, quality, and purity prior to release. Without sufficient release and ongoing stability testing, defective drug products that may pose a risk to consumers are unlikely to be detected.\nIn response to this letter, provide:\nThe method validation protocol, report, and supporting data for your current Hypromellose assay method, and any revised methods. Include the scientific rationale for its use as release and stability indicating tests.\nA comprehensive independent assessment of your laboratory practices, procedures, methods, equipment, documentation, and analyst competencies. Based on this review, provide a detailed plan to remediate and evaluate the effectiveness of your laboratory system.\nA list of chemical and microbial specifications, including test methods, used to analyze each batch of your drug products before a batch disposition decision.\no An action plan and timelines for conducting full chemical and microbiological testing of retain samples to determine the quality of all batches of drug product distributed to the United States that are within expiry as of the date of this letter.\no A summary of all results obtained from testing retain samples from each batch. If such testing reveals substandard quality drug products, take rapid corrective actions, such as notifying customers and product recalls.\nA comprehensive, independent assessment and CAPA plan to ensure the adequacy of your stability program. Your remediated program should include, but not be limited to:\no Stability indicating methods.\no Stability studies for each drug product in its marketed container-closure system before distribution is permitted.\no An ongoing program in which representative batches of each product are added each year to the program to determine if the shelf-life claim remains valid.\nAll procedures that describe these and other elements of your remediated stability program.\n4. Your firm failed to establish an adequate quality unit and the responsibilities and procedures applicable to the quality control unit are not in writing and fully followed (21 CFR 211.22(a) and (d)).\nYour firm’s QU failed to adequately execute its responsibilities.\nThis includes oversight of both internal and external manufacturing activities, including laboratory services.\nRegarding functions that occurred at your facility, the records and information you provided demonstrate that your QU did not effectively exercise its responsibilities to oversee the quality of your ophthalmic drug manufacturing operations. Your firm failed to follow established procedures. For example, you had not conducted annual product reviews since 2018, which was cited as an observation in a previous inspection. In addition, your firm did not conduct annual examinations of reserve samples for the past 2 years.\nRegarding external functions performed on your behalf, your ongoing oversight of critical contract services was insufficient.\nYour QU is responsible for fully exercising its authority and responsibilities. Our inspectional findings indicate that your QU is not conducting appropriate oversight of drug CGMP operations.\nYour response is inadequate. Although you commit to addressing the observations we identified, your response lacks detail on systemic remediations needed for your QU and your quality system.\nYour firm’s quality systems are inadequate. See FDA’s guidance document Quality Systems Approach to Pharmaceutical CGMP Regulations for help implementing quality systems and risk management approaches to meet the requirements of CGMP regulations 21 CFR, parts 210 and 211 at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F71023\u002Fdownload.\nIn response to this letter, provide:\nA comprehensive assessment and remediation plan to ensure your QU is given the authority and resources to effectively function. The assessment should also include, but not be limited to:\no A determination of whether procedures used by your firm are robust and appropriate.\no Detailed definition of the specific attributes to be tested at each station (timepoint).\no Provisions for QU oversight throughout your operations to evaluate adherence to appropriate practices. o A complete and final review of each batch and its related information before the QU disposition decision.\no Oversight and approval of investigations and discharging of all other QU duties to ensure identity, strength, quality, and purity of all products.\nAlso describe how top management supports quality assurance and reliable operations, including but not limited to, timely provision of resources to proactively address emerging manufacturing\u002Fquality issues and to assure a continuing state of control.\nCGMP Consultant Recommended\nBased upon the nature of the violations we identified at your firm and because you failed to correct repeat violations, you should engage a consultant qualified as set forth in 21 CFR 211.34 to assist your firm in meeting CGMP requirements.\nYour use of a consultant does not relieve your firm’s obligation to comply with CGMP. Your firm’s executive management remains responsible for resolving all deficiencies and systemic flaws to ensure ongoing CGMP compliance.\nConclusion\nThe violations cited in this letter are not intended to be an all-inclusive list of violations that exist at your facility. You are responsible for investigating and determining the causes of any violations and for preventing their recurrence or the occurrence of other violations.\nCorrect any violations promptly. Failure to promptly and adequately address this matter may result in regulatory or legal action without further notice including, without limitation, seizure and injunction. Unresolved violations may also prevent other Federal agencies from awarding contracts.\nFailure to address violations may also cause FDA to withhold issuance of Export Certificates. FDA may withhold approval of new applications or supplements listing your firm as a drug manufacturer until any violations are completely addressed and we confirm your compliance with CGMP. We may re-inspect to verify that you have completed corrective actions to address any violations.\nThis letter notifies you of our findings and provides you an opportunity to address the above deficiencies. After you receive this letter, respond to this office in writing within 15 working days. Specify what you have done to address any violations and to prevent their recurrence. In response to this letter, you may provide additional information for our consideration as we continue to assess your activities and practices. If you cannot complete corrective actions within 15 working days, state your reasons for delay and your schedule for completion.\nSend your electronic reply to CDER-OC-OMQ-Communications@fda.hhs.gov. Identify your response with FEI 2083373 and ATTN: Carrie A. Hughes.\nSincerely,\n\u002FS\u002F\nFrancis Godwin\nDirector\nOffice of Manufacturing Quality\nOffice of Compliance\nCenter for Drug Evaluation and Research","Oasis Medical, Inc.","oasis-medical-inc-707198-07152025","2026-08-18T06:42:28.676509+00:00",null,"https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Foasis-medical-inc-707198-07152025","2026-10-26T08:09:36.575698+00:00","Warning Letter","Issued","2025-08-05","707198","Drugs","Mr. Norman Craig Delgado","2026-08-19T16:31:41.001+00:00","Via Email","320-25-93","2025-07-15",{"id":33,"raw":34,"subject":40,"body_html":41,"body_text":42,"firm_name":43,"letter_id":44,"created_at":45,"fei_number":19,"letter_url":46,"updated_at":47,"action_type":22,"case_status":23,"posted_date":48,"marcs_cms_no":49,"product_type":50,"closeout_date":19,"issuing_office":38,"recipient_name":51,"body_fetched_at":52,"delivery_method":29,"recipient_title":19,"reference_number":19,"action_taken_date":53,"medical_device_id":19,"response_letter_date":19},1152,[35,36,37,38,39,13,13,13],"\u003Ctime datetime=\"2024-11-26T14:20:00Z\">11\u002F26\u002F2024\u003C\u002Ftime>\n","\u003Ctime datetime=\"2024-10-11T04:00:00Z\">10\u002F11\u002F2024\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fadept-medical-ltd-692226-10112024\">Adept Medical Ltd. \u003C\u002Fa>","Center for Devices and Radiological Health","CGMP\u002FQSR\u002FMedical Devices\u002FAdulterated\u002FMisbranded\u003Cbr \u002F>\r\n","CGMP\u002FQSR\u002FMedical Devices\u002FAdulterated\u002FMisbranded","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>Via Email\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Mr. Murray Fenton\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>Founder, CEO and Guiding Director\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Adept Medical Ltd. \u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>2-6 Mc Donald Street\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Morningside\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Auckland\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>New Zealand\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>October 11, 2024\u003C\u002Fp>\n\n\u003Cp>Dear Mr. Fenton:\u003C\u002Fp>\n\n\u003Cp>During an inspection of your firm located in Auckland, New Zealand on May 13, 2024, through May 16, 2024, an investigator from the United States Food and Drug Administration (FDA) determined that your firm manufactures Tympanostomy Tubes \"NeoZoline Ventilation Tubes\". Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\u003C\u002Fp>\n\n\u003Cp>This inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. §351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. We received a response from Ms. Yi Huang, Quality and Regulatory Manager dated June 13, 2024, concerning our investigator's observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, which was issued to your firm. We address this response below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\u003C\u002Fp>\n\n\u003Cp>1. Failure to establish and maintain procedures for acceptance activities, which include inspections, tests, or other verification activities, as required by 21 CFR 820.80(a).\u003C\u002Fp>\n\n\u003Cp>For example:\u003C\u002Fp>\n\n\u003Cp>1) Your firm's current incoming inspection and acceptance procedure for Biological Indicator \u003Cstrong>(b)(4)\u003C\u002Fstrong> (BI) is not adequately established. This inadequacy could compromise the sterilization process, potentially affecting the safety and effectiveness of the NeoZoline V ntilation Tubes. Your firm discards the Certificate of Conformance provided by&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> with each BI batch, which was requested by the FDA investigator during the inspection. It appears that your firm failed to retain critical documents such as the reconciliation sheet, production batch record, or \u003Cstrong>(b)(4)\u003C\u002Fstrong> Certification of Conformance, which are required under your own WI22 \"Production QC and Release Product Register,\" specifically section 2.3, to demonstrate that the product was successfully sterilized. The inspection revealed that your firm does not perform BI Population verification tests on the received BI batches to ensure that the population has not changed during shipping or storage. This is a critical step is necessary to provide a high degree of assurance that the BIs are viable to support verification that finished product is successfully sterilized through the&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> Sterilization process. Additionally, the inspection revealed that critical information such as the batch number and expiration date of the BI used in the sterile load is not documented on the post-sterilization B1 Test Reports, which are used as part of the finished device acceptance and release process.\u003C\u002Fp>\n\n\u003Cp>2) Your firm's incoming inspection and acceptance procedure for Sterile Potties (M1421, M1422) used for storing ultrasound cleaned NeoZoline Ventilation Tubes is not adequately established. The inspection revealed that your firm accepts incoming sterile pottle lots without a Certificate of Sterilization from the supplier. \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm stated that no additional testing or verification is performed to ensure the sterility of the incoming potties.&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on June 1, 2024. Your firm concluded that a risk analysis of the specific observation indicates no risk to end users for products currently in distribution and manufacturing. That conclusion is based on the following factors:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>The&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> Biological Indicator is an off the shelf product from supplier where \u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;has claimed compliance with ISO 11138-1:2017 and ISO 11138-2:2017.\u003C\u002Fli>\n\t\u003Cli>The BI is packaged in a foil pouch designed to protect the product from humidity excursions.\u003C\u002Fli>\n\t\u003Cli>The potties are used to store non-sterile Ventilation Tubes hence the sterility of the pottle is not a requirement.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>Additionally, your firm has outlined a plan with the following actions to be completed by December 1, 2024, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Based on your firm's response there is an ambiguity in the definition of the term `pottle' and whether it is required to be sterile or not. \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>your firm's response states that there is no risk for the stenle products manufactured at your facility because the BIs that they use conform to ISO 11138-1:2017 and ISO 11138-2:2017, and that they are in their sterile packaging until they are needed. However, the inspection demonstrated that your firm does not do any testing to verify that the BIs purchased for the purpose of demonstrating that terminal sterilization is achieved, are actually viable when they are used. Additionally, the inspection revealed that they do not capture key data such as BI batch number and expiration date, and thus if a BI falsely indicated that a sterilization was successful, there is no mechanism by which your firm can trace the lots of sterile products back to a failed BI.\u003C\u002Fp>\n\n\u003Cp>Additionally, your firm did not include documentation or evidence of the corrections or corrective actions because they are in progress and have not been completed. Additionally, given the observations described above, your firm has not provided a commitment to conduct a retrospective assessment of all finished devices whose sterilization was verified using Biological Indicator \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>to determine whether sterility was compromised.\u003C\u002Fp>\n\n\u003Cp>2. Failure to ensure that where the results of a process cannot be fully verified by subsequent inspection and test, the process shall be validated with a high degree of assurance and approved according to established procedures, as required by 21 CFR 820.75(a). For example:\u003C\u002Fp>\n\n\u003Cp>1) Your firm's ultrasonic cleaning process using the&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>Cleaner&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>is not adequately validated according to your firm's Manufacturing Process&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;\u003C\u002Fstrong>During the inspection, FDA's investigator revealed that the ultrasonic cleaning process was not adequately validated because critical details—such as the description of the NeoZoline Ventilation Tube (including part number, size, and shape), the number of validation batches (runs), validation batch size, and sample size used—were not documented.\u003C\u002Fp>\n\n\u003Cp>2) During the inspection, your firm stated that it had not validated the \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>process for the NeoZoline Ventilation Tube&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm&nbsp;stated that the&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>.&nbsp; Adept Medical also confirmed during the inspection that&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;had not validated the NeoZoline Ventilation Tube&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;and that prior to Spring 2023,&nbsp;\u003Cstrong>(b)(4) \u003C\u002Fstrong>the\u003Cstrong>&nbsp;\u003C\u002Fstrong>NeoZoline Ventilation Tube \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>who also did not have a&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> NeoZoline Ventilation Tube.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates its Initial Action was completed on June 1, 2024. Your firm concluded that there is no risk to end users for products currently in supply and with distributors, based on the following factors:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>There is an existing validated sterilization process indicating a sterility assurance level of \u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fli>\n\t\u003Cli>Annual bioburden results of pre-cleaned devices have bioburden levels below&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> CFU.\u003C\u002Fli>\n\t\u003Cli>Current validation data, although not well documented in its sample selection and setting, still indicated the current setting provided adequate bioburden results, well within the capability of the sterilization process.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>Additionally, your firm has outlined a plan to be completed by June 1, 2025, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>However, your firm has not provided any evidence to substantiate your claims that the&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>sterility assurance level or the bioburden limits below \u003Cstrong>(b)(4)\u003C\u002Fstrong> CFU were consistently achievable. The inspection raised concerns about your firm sterilization process, as discussed in the above section regarding compliance with 21 CFR 820.80(a). It is noteworthy that FDA requested validation documents for the \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>Cleaner during the May 2024 inspection and did not receive any documentation to indicate that this process was validated.\u003C\u002Fp>\n\n\u003Cp>3. Failure to establish and maintain procedures for implementing corrective and preventive action, as required by 21 CFR 820.100. For example:\u003C\u002Fp>\n\n\u003Cp>Your firm's Corrective and Preventive Action (CAPA) procedure (M05-03) fails to ensure that:\u003C\u002Fp>\n\n\u003Cp>1) The quality data is adequately analyzed to identify potential and existing causes of nonconformances or other quality issues. Your firm stated to the FDA investigator that, although data is analyzed, they do not evaluate the results to determine whether any corrective or preventive actions are necessary, as required by 21 CFR 820.100(a)(3).\u003C\u002Fp>\n\n\u003Cp>2) Your firm failed to adequately verify the effectiveness of corrective actions for several CAPAs before closing them. Specifically, CAPAs CA-459, CA-438, and CA-437 were closed after implementing corrective actions, but your firm did not verify the effectiveness of these actions, as required by 21 CFR 820.100(a)(4).\u003C\u002Fp>\n\n\u003Cp>3) CA-429 was closed on February 16, 2023; at the time of the inspection, your firm stated that they had not started any of the corrective actions identified in the CAPA. As a result of the discussion during the inspection, your firm volunteered to mark the CAPA as 'open,' so that the corrective actions could be implemented.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that although procedure&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>the procedure did not instruct how to this data should be analyzed, and what subsequent actions should be taken once the data analysis is complete. However, your firm's procedure&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Your firm has outlined the following plan to be completed by April 1, 2025, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>However, your firm's response does not identify conducting a retrospective analysis for all past CAPAs, to determine the impact of the lack of data analysis, and whether the appropriate corrective and\u002For preventive action was taken to address each CAPA's root cause. Additionally, your firm did not identify what actions it would take to address the lack of implementation of identified corrective actions and whether that issue is a systemic problem.\u003C\u002Fp>\n\n\u003Cp>4. Failure to establish and maintain procedures to control product that does not conform to specified requirements, including the identification, documentation, evaluation, segregation, and disposition of nonconforming product; and failure to ensure that the evaluation includes a determination of the need for an investigation, as required by 21 CFR 820.90(a). For example:\u003C\u002Fp>\n\n\u003Cp>The FDA investigator reviewed six NC records related to your firm's NeoZoline Ventilation Tubes. All six NC records were closed (NC-2516, NC-2767, NC-2641, NC-2640, NC-2738, NC-2523), but showed the following deficiencies in documentation:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>The NC records did not adequately document the evaluation of the identified nonconformities.\u003C\u002Fli>\n\t\u003Cli>The rationale for not conducting related investigations was inadequately documented in all six NC records.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>Your firm explained that incoming NeoZoline Ventilation Tubes \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>are not inspected upon arrival.&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;\u003C\u002Fstrong>Your firm further stated that they \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;\u003C\u002Fstrong>This target achievement was cited as the reason for not taking further action.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that there is no risk to end users for products currently in supply and with distributors. That conclusion is based on postmarket surveillance data, which shows no product safety or performance complaints since the product's launch. However, a lack of documented safety signals does not ensure that nonconforming product was controlled and not introduced into commerce.\u003C\u002Fp>\n\n\u003Cp>Additionally, your firm has outlined a plan to be completed by April 1, 2025, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>However, your firm did not include documentation to demonstrate that it has evaluated or will evaluate all past non-conformances against your new procedure to determine whether additional corrective action was required to address the non-conformances identified in your NC Records.\u003C\u002Fp>\n\n\u003Cp>5. Failure to define the type and extent of control to be exercised over the product, services, suppliers, contractors, and consultants, based on the evaluation results, as required by 21 CFR 820.50(a)(2). For example:\u003C\u002Fp>\n\n\u003Cp>During the inspection, your firm was asked whether the \u003Cstrong>(b)(4)\u003C\u002Fstrong> for the NeoZoline ventilation tubes was validated&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm stated you have no knowledge or documentation regarding&nbsp;whether the&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>for the NeoZoline Ventilation Tubes had been properly&nbsp;validated.&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>Adept Medical learned the&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>Adept Medical received \u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;units of NeoZoline Ventilation Tubes in various types from&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;between June 2023 and November 2023. They released \u003Cstrong>(b)(4) \u003C\u002Fstrong>units\u003Cstrong>&nbsp;\u003C\u002Fstrong>(\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>boxes) of the NeoZoline Ventilation Tubes to the United States. Prior to June 2023, all NeoZoline Ventilation Tubes were \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;&nbsp;\u003C\u002Fstrong>Adept has failed to ensure that the conditions of the supplier agreement were adhered to by your supplier.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that there is no risk to the end users for products currently in supply and with distributors, based on the following considerations:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>The post-market periodic safety update report (PSUR) on Ventilation Tubes supplied by \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>indicated no adverse events.\u003C\u002Fli>\n\t\u003Cli>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fli>\n\t\u003Cli>Post market surveillance data indicated we have had no product safety or performance complaints since product launch.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>However, a lack of adverse events in post market safety signals does not provide assurance that the device meets its design specifications, in light of the fact that, Adept Medical was unaware that your supplier \u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;the NeoZoline Ventilation Tube \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>did not have any documentation that the \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>device was validated.\u003C\u002Fp>\n\n\u003Cp>Additionally, your firm has outlined a plan to be completed by June 1, 2025, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>However, based on your firm's response, it is unclear how you intend to evaluate suppliers' compliance with 21 CFR Part 820, the Quality System Regulation.\u003C\u002Fp>\n\n\u003Cp>Our inspection also revealed that the NeoZoline Ventilation Tubes are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PM_A) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, in that your firm did not notify FDA regarding a significant change or modification in the device that could significantly affect the safety or effectiveness of the device, as required by section 510(k) of the Act, 21 U.S.C. § 360(k), and 21 C.F.R. 807.81 (a)(3)(i).\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm has modified the NeoZoline Ventilation Tubes cleared under K061058. The modification involves the use of a \u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;which was not cleared in the original submission and is a change that could significantly affect the safety or effectiveness of the device. This modification necessitates a comprehensive risk assessment to ensure the device remains safe and effective. A new biocompatibility evaluation is required to determine if \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;\u003C\u002Fstrong>Any \u003Cstrong>(b)(4)\u003C\u002Fstrong> may affect how the device can be safely and effectively sterilized. Thus, your sterilization processes must be validated for the&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> to ensure that it can be properly sterilized without&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> becoming unsafe. The change in \u003Cstrong>(b)(4)\u003C\u002Fstrong> may alter the device's performance or specifications, so a thorough re-evaluation is necessary to ensure it still meets all necessary standards and functions as intended. Due to the \u003Cstrong>(b)(4)\u003C\u002Fstrong> modification and its potential impact on the device's safety and performance, a new 510(k) submission is required before marketing the modified device in the United States.\u003C\u002Fp>\n\n\u003Cp>For a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the agency. [21 CFR 807.81(b)] The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fd efault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\u003C\u002Fp>\n\n\u003Cp>Other federal agencies may take your compliance with the FD&amp;C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed.\u003C\u002Fp>\n\n\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, including an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm's planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Please provide a translation of documentation not in English to facilitate our review. We will notify you regarding the adequacy of your firm's response(s) and the need to re-inspect your firm's facility to verify that the appropriate corrections and\u002For corrective actions have been made. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\n\n\u003Cp>Your firm's response should be sent via email to CDRHWarningLetterResponses@fda.hhs.gov or by mail to Food and Drug Administration, Center for Devices and Radiological Health, Office of Regulatory Programs, Division of Regulatory Programs 2, FDA Regulatory Inspections and Audits Team, White Oak Building 66, 10903 New Hampshire Ave., Silver Spring, MD 20993. Refer to CMS case #692226 when replying. If you have any questions about the contents of this letter, please contact: Shu-Chen Peng, Ph.D. at 301-796-6481.\u003C\u002Fp>\n\n\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm's facility. It is your firm's responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm's manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\u003C\u002Fp>\n\n\u003Cp>Sincerely yours,\u003Cbr>\n\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>Malvina B. Eydelman, M.D.\u003Cbr>\nDirector\u003Cbr>\nOHT1: Office of Ophthalmic, Anesthesia,\u003Cbr>\nRespiratory, ENT and Dental Devices\u003Cbr>\nOffice of Product Evaluation and Quality\u003Cbr>\nCenter for Devices and Radiological Health\u003C\u002Fp>\n\n\u003Cp>CC:\u003Cbr>\n\u003Cstrong>(b)(4)\u003C\u002Fstrong>, Registrar Corp.,\u003Cbr>\n144 Research Drive,\u003Cbr>\nHampton, Virginia,\u003Cbr>\nUSA 23666\u003Cbr>\nPhone: Tel: 1-757-224-0177, Ext.&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003Cbr>\nEmail:\u003Cstrong>(b)(4)\u003C\u002Fstrong>@registrarcorp.com\u003C\u002Fp>\n\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVia Email\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nMr. Murray Fenton\n\nRecipient Title\n\nFounder, CEO and Guiding Director\n\nAdept Medical Ltd.\n\n2-6 Mc Donald Street\n\nMorningside\n\nAuckland\n\nNew Zealand\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nWARNING LETTER\n\nOctober 11, 2024\n\nDear Mr. Fenton:\n\nDuring an inspection of your firm located in Auckland, New Zealand on May 13, 2024, through May 16, 2024, an investigator from the United States Food and Drug Administration (FDA) determined that your firm manufactures Tympanostomy Tubes \"NeoZoline Ventilation Tubes\". Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\n\nThis inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. §351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. We received a response from Ms. Yi Huang, Quality and Regulatory Manager dated June 13, 2024, concerning our investigator's observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, which was issued to your firm. We address this response below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\n\n1. Failure to establish and maintain procedures for acceptance activities, which include inspections, tests, or other verification activities, as required by 21 CFR 820.80(a).\n\nFor example:\n\n1) Your firm's current incoming inspection and acceptance procedure for Biological Indicator (b)(4) (BI) is not adequately established. This inadequacy could compromise the sterilization process, potentially affecting the safety and effectiveness of the NeoZoline V ntilation Tubes. Your firm discards the Certificate of Conformance provided by (b)(4) with each BI batch, which was requested by the FDA investigator during the inspection. It appears that your firm failed to retain critical documents such as the reconciliation sheet, production batch record, or (b)(4) Certification of Conformance, which are required under your own WI22 \"Production QC and Release Product Register,\" specifically section 2.3, to demonstrate that the product was successfully sterilized. The inspection revealed that your firm does not perform BI Population verification tests on the received BI batches to ensure that the population has not changed during shipping or storage. This is a critical step is necessary to provide a high degree of assurance that the BIs are viable to support verification that finished product is successfully sterilized through the (b)(4) Sterilization process. Additionally, the inspection revealed that critical information such as the batch number and expiration date of the BI used in the sterile load is not documented on the post-sterilization B1 Test Reports, which are used as part of the finished device acceptance and release process.\n\n2) Your firm's incoming inspection and acceptance procedure for Sterile Potties (M1421, M1422) used for storing ultrasound cleaned NeoZoline Ventilation Tubes is not adequately established. The inspection revealed that your firm accepts incoming sterile pottle lots without a Certificate of Sterilization from the supplier. (b)(4). Your firm stated that no additional testing or verification is performed to ensure the sterility of the incoming potties. (b)(4)\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on June 1, 2024. Your firm concluded that a risk analysis of the specific observation indicates no risk to end users for products currently in distribution and manufacturing. That conclusion is based on the following factors:\n\nThe (b)(4) Biological Indicator is an off the shelf product from supplier where (b)(4) has claimed compliance with ISO 11138-1:2017 and ISO 11138-2:2017.\n\nThe BI is packaged in a foil pouch designed to protect the product from humidity excursions.\n\nThe potties are used to store non-sterile Ventilation Tubes hence the sterility of the pottle is not a requirement.\n\nAdditionally, your firm has outlined a plan with the following actions to be completed by December 1, 2024, which includes the following actions:\n\n(b)(4)\n\nBased on your firm's response there is an ambiguity in the definition of the term `pottle' and whether it is required to be sterile or not. (b)(4) your firm's response states that there is no risk for the stenle products manufactured at your facility because the BIs that they use conform to ISO 11138-1:2017 and ISO 11138-2:2017, and that they are in their sterile packaging until they are needed. However, the inspection demonstrated that your firm does not do any testing to verify that the BIs purchased for the purpose of demonstrating that terminal sterilization is achieved, are actually viable when they are used. Additionally, the inspection revealed that they do not capture key data such as BI batch number and expiration date, and thus if a BI falsely indicated that a sterilization was successful, there is no mechanism by which your firm can trace the lots of sterile products back to a failed BI.\n\nAdditionally, your firm did not include documentation or evidence of the corrections or corrective actions because they are in progress and have not been completed. Additionally, given the observations described above, your firm has not provided a commitment to conduct a retrospective assessment of all finished devices whose sterilization was verified using Biological Indicator (b)(4) to determine whether sterility was compromised.\n\n2. Failure to ensure that where the results of a process cannot be fully verified by subsequent inspection and test, the process shall be validated with a high degree of assurance and approved according to established procedures, as required by 21 CFR 820.75(a). For example:\n\n1) Your firm's ultrasonic cleaning process using the (b)(4) Cleaner (b)(4) is not adequately validated according to your firm's Manufacturing Process (b)(4). During the inspection, FDA's investigator revealed that the ultrasonic cleaning process was not adequately validated because critical details—such as the description of the NeoZoline Ventilation Tube (including part number, size, and shape), the number of validation batches (runs), validation batch size, and sample size used—were not documented.\n\n2) During the inspection, your firm stated that it had not validated the (b)(4) process for the NeoZoline Ventilation Tube (b)(4). Your firm stated that the (b)(4). Adept Medical also confirmed during the inspection that (b)(4) had not validated the NeoZoline Ventilation Tube (b)(4) and that prior to Spring 2023, (b)(4) the NeoZoline Ventilation Tube (b)(4) who also did not have a (b)(4) NeoZoline Ventilation Tube.\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates its Initial Action was completed on June 1, 2024. Your firm concluded that there is no risk to end users for products currently in supply and with distributors, based on the following factors:\n\nThere is an existing validated sterilization process indicating a sterility assurance level of (b)(4)\n\nAnnual bioburden results of pre-cleaned devices have bioburden levels below (b)(4) CFU.\n\nCurrent validation data, although not well documented in its sample selection and setting, still indicated the current setting provided adequate bioburden results, well within the capability of the sterilization process.\n\nAdditionally, your firm has outlined a plan to be completed by June 1, 2025, which includes the following actions:\n\n(b)(4)\n\nHowever, your firm has not provided any evidence to substantiate your claims that the (b)(4) sterility assurance level or the bioburden limits below (b)(4) CFU were consistently achievable. The inspection raised concerns about your firm sterilization process, as discussed in the above section regarding compliance with 21 CFR 820.80(a). It is noteworthy that FDA requested validation documents for the (b)(4) Cleaner during the May 2024 inspection and did not receive any documentation to indicate that this process was validated.\n\n3. Failure to establish and maintain procedures for implementing corrective and preventive action, as required by 21 CFR 820.100. For example:\n\nYour firm's Corrective and Preventive Action (CAPA) procedure (M05-03) fails to ensure that:\n\n1) The quality data is adequately analyzed to identify potential and existing causes of nonconformances or other quality issues. Your firm stated to the FDA investigator that, although data is analyzed, they do not evaluate the results to determine whether any corrective or preventive actions are necessary, as required by 21 CFR 820.100(a)(3).\n\n2) Your firm failed to adequately verify the effectiveness of corrective actions for several CAPAs before closing them. Specifically, CAPAs CA-459, CA-438, and CA-437 were closed after implementing corrective actions, but your firm did not verify the effectiveness of these actions, as required by 21 CFR 820.100(a)(4).\n\n3) CA-429 was closed on February 16, 2023; at the time of the inspection, your firm stated that they had not started any of the corrective actions identified in the CAPA. As a result of the discussion during the inspection, your firm volunteered to mark the CAPA as 'open,' so that the corrective actions could be implemented.\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that although procedure (b)(4) the procedure did not instruct how to this data should be analyzed, and what subsequent actions should be taken once the data analysis is complete. However, your firm's procedure (b)(4)\n\nYour firm has outlined the following plan to be completed by April 1, 2025, which includes the following actions:\n\n(b)(4)\n\nHowever, your firm's response does not identify conducting a retrospective analysis for all past CAPAs, to determine the impact of the lack of data analysis, and whether the appropriate corrective and\u002For preventive action was taken to address each CAPA's root cause. Additionally, your firm did not identify what actions it would take to address the lack of implementation of identified corrective actions and whether that issue is a systemic problem.\n\n4. Failure to establish and maintain procedures to control product that does not conform to specified requirements, including the identification, documentation, evaluation, segregation, and disposition of nonconforming product; and failure to ensure that the evaluation includes a determination of the need for an investigation, as required by 21 CFR 820.90(a). For example:\n\nThe FDA investigator reviewed six NC records related to your firm's NeoZoline Ventilation Tubes. All six NC records were closed (NC-2516, NC-2767, NC-2641, NC-2640, NC-2738, NC-2523), but showed the following deficiencies in documentation:\n\nThe NC records did not adequately document the evaluation of the identified nonconformities.\n\nThe rationale for not conducting related investigations was inadequately documented in all six NC records.\n\nYour firm explained that incoming NeoZoline Ventilation Tubes (b)(4) are not inspected upon arrival. (b)(4). Your firm further stated that they (b)(4). This target achievement was cited as the reason for not taking further action.\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that there is no risk to end users for products currently in supply and with distributors. That conclusion is based on postmarket surveillance data, which shows no product safety or performance complaints since the product's launch. However, a lack of documented safety signals does not ensure that nonconforming product was controlled and not introduced into commerce.\n\nAdditionally, your firm has outlined a plan to be completed by April 1, 2025, which includes the following actions:\n\n(b)(4)\n\nHowever, your firm did not include documentation to demonstrate that it has evaluated or will evaluate all past non-conformances against your new procedure to determine whether additional corrective action was required to address the non-conformances identified in your NC Records.\n\n5. Failure to define the type and extent of control to be exercised over the product, services, suppliers, contractors, and consultants, based on the evaluation results, as required by 21 CFR 820.50(a)(2). For example:\n\nDuring the inspection, your firm was asked whether the (b)(4) for the NeoZoline ventilation tubes was validated (b)(4). Your firm stated you have no knowledge or documentation regarding whether the (b)(4) for the NeoZoline Ventilation Tubes had been properly validated. (b)(4) Adept Medical learned the (b)(4) Adept Medical received (b)(4) units of NeoZoline Ventilation Tubes in various types from (b)(4) between June 2023 and November 2023. They released (b)(4) units ((b)(4) boxes) of the NeoZoline Ventilation Tubes to the United States. Prior to June 2023, all NeoZoline Ventilation Tubes were (b)(4). Adept has failed to ensure that the conditions of the supplier agreement were adhered to by your supplier.\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that there is no risk to the end users for products currently in supply and with distributors, based on the following considerations:\n\nThe post-market periodic safety update report (PSUR) on Ventilation Tubes supplied by (b)(4) indicated no adverse events.\n\n(b)(4)\n\nPost market surveillance data indicated we have had no product safety or performance complaints since product launch.\n\nHowever, a lack of adverse events in post market safety signals does not provide assurance that the device meets its design specifications, in light of the fact that, Adept Medical was unaware that your supplier (b)(4) the NeoZoline Ventilation Tube (b)(4) did not have any documentation that the (b)(4) device was validated.\n\nAdditionally, your firm has outlined a plan to be completed by June 1, 2025, which includes the following actions:\n\n(b)(4)\n\nHowever, based on your firm's response, it is unclear how you intend to evaluate suppliers' compliance with 21 CFR Part 820, the Quality System Regulation.\n\nOur inspection also revealed that the NeoZoline Ventilation Tubes are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PM_A) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, in that your firm did not notify FDA regarding a significant change or modification in the device that could significantly affect the safety or effectiveness of the device, as required by section 510(k) of the Act, 21 U.S.C. § 360(k), and 21 C.F.R. 807.81 (a)(3)(i).\n\nSpecifically, your firm has modified the NeoZoline Ventilation Tubes cleared under K061058. The modification involves the use of a (b)(4) which was not cleared in the original submission and is a change that could significantly affect the safety or effectiveness of the device. This modification necessitates a comprehensive risk assessment to ensure the device remains safe and effective. A new biocompatibility evaluation is required to determine if (b)(4). Any (b)(4) may affect how the device can be safely and effectively sterilized. Thus, your sterilization processes must be validated for the (b)(4) to ensure that it can be properly sterilized without (b)(4) becoming unsafe. The change in (b)(4) may alter the device's performance or specifications, so a thorough re-evaluation is necessary to ensure it still meets all necessary standards and functions as intended. Due to the (b)(4) modification and its potential impact on the device's safety and performance, a new 510(k) submission is required before marketing the modified device in the United States.\n\nFor a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the agency. [21 CFR 807.81(b)] The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fd efault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\n\nOther federal agencies may take your compliance with the FD&C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed.\n\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, including an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm's planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Please provide a translation of documentation not in English to facilitate our review. We will notify you regarding the adequacy of your firm's response(s) and the need to re-inspect your firm's facility to verify that the appropriate corrections and\u002For corrective actions have been made. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration as part of your response.\n\nYour firm's response should be sent via email to CDRHWarningLetterResponses@fda.hhs.gov or by mail to Food and Drug Administration, Center for Devices and Radiological Health, Office of Regulatory Programs, Division of Regulatory Programs 2, FDA Regulatory Inspections and Audits Team, White Oak Building 66, 10903 New Hampshire Ave., Silver Spring, MD 20993. Refer to CMS case #692226 when replying. If you have any questions about the contents of this letter, please contact: Shu-Chen Peng, Ph.D. at 301-796-6481.\n\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm's facility. It is your firm's responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm's manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\n\nSincerely yours,\n\n\u002FS\u002F\n\nMalvina B. Eydelman, M.D.\n\nDirector\n\nOHT1: Office of Ophthalmic, Anesthesia,\n\nRespiratory, ENT and Dental Devices\n\nOffice of Product Evaluation and Quality\n\nCenter for Devices and Radiological Health\n\nCC:\n\n(b)(4), Registrar Corp.,\n\n144 Research Drive,\n\nHampton, Virginia,\n\nUSA 23666\n\nPhone: Tel: 1-757-224-0177, Ext. (b)(4)\n\nEmail:(b)(4)@registrarcorp.com","Adept Medical Ltd.","adept-medical-ltd-692226-10112024","2026-08-18T06:42:28.856152+00:00","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fadept-medical-ltd-692226-10112024","2026-10-26T08:07:50.120298+00:00","2024-11-26","692226","Medical Devices","Mr. Murray Fenton","2026-08-19T17:57:49.713+00:00","2024-10-11",{"id":55,"raw":56,"subject":60,"body_html":62,"body_text":63,"firm_name":64,"letter_id":65,"created_at":66,"fei_number":19,"letter_url":67,"updated_at":68,"action_type":22,"case_status":69,"posted_date":70,"marcs_cms_no":71,"product_type":50,"closeout_date":72,"issuing_office":38,"recipient_name":73,"body_fetched_at":74,"delivery_method":19,"recipient_title":19,"reference_number":19,"action_taken_date":75,"medical_device_id":19,"response_letter_date":19},1671,[57,58,59,38,60,13,61,13],"\u003Ctime datetime=\"2023-12-26T14:20:00Z\">12\u002F26\u002F2023\u003C\u002Ftime>\n","\u003Ctime datetime=\"2023-09-22T04:00:00Z\">09\u002F22\u002F2023\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fsonesta-medical-ab-667325-09222023\">Sonesta Medical AB\u003C\u002Fa>","CGMP\u002FQSR\u002FMedical Devices\u002FAdulterated","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fsonesta-medical-ab-667325-12042023\">\u003Ctime datetime=\"2024-02-28T05:00:00Z\">02\u002F28\u002F2024\u003C\u002Ftime>\n\u003C\u002Fa>","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Pelin Sari\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>Chief Executive Officer\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Sonesta Medical AB\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>Industrivagen 7\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>171 48\u003C\u002Fspan> \u003Cspan>Solna\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Sweden\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:(b)(6)@sonestamedical.se\"> (b)(6)@sonestamedical.se\u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n  \u003Cdiv>\n    \u003Cdiv>Secondary Issuing Offices\u003C\u002Fdiv>\n          \u003Cdiv>\n              \u003Cdiv>    \u003Cbr>\n    \n     \n        \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n    \n    \n    \n    \n\u003C\u002Fdiv>\n              \u003C\u002Fdiv>\n      \u003C\u002Fdiv>\n\n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>September 22, 2023\u003Cbr>\n\u003Cbr>\nDear Ms. Sari:\u003C\u002Fp>\n\n\u003Cp>During an inspection of your firm located in Solna, Sweden on June 5, 2023, through June 7, 2023, an investigator from the United States Food and Drug Administration (FDA) determined that your firm manufactures the Model 6210 radiographic table and Model S2 and S3 cystometric tables. Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or function of the body.\u003C\u002Fp>\n\n\u003Cp>This inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. We received responses from you dated June 1, 2023, August 11, 2023, and September 1, 2023, concerning our investigator’s observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, which was issued to your firm. We address these responses below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\u003C\u002Fp>\n\n\u003Cp>1. Failure to establish and maintain procedures to ensure that all purchased or otherwise received product and services conform to specific requirements, as required by 21 CFR 820.50(a). Specifically, your firm’s current purchasing controls procedure, Supplier Evaluation, Rev 2, dated April 7, 2021, fails to define the frequency, type, and extent of control to exercise over suppliers, contractors, and consultants, based on the results of periodic evaluation. Additionally, your firm has not evaluated your contract repair\u002Fservicer, and the current contract Quality Assurance &amp; Regulatory Affairs consultant. Further, your firm failed to maintain records covering evaluation of the current contract Quality Assurance &amp; Regulatory Affairs consultant, who has been assisting your firm in overseeing and maintaining their Quality System procedures since the year 2020.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm’s responses dated June 1, 2023, August 11, 2023, and September 1, 2023, and conclude that they are not adequate. Your firm’s responses state that you have revised the Supplier Evaluation SOP 1) to include the frequency and\u002For period for evaluation of suppliers, contractors, and consultants, 2) to include the type and extent of control to exercise over suppliers, contractors and consultants based on the results of the periodic evaluation, 3) to include evaluation of the contract repair\u002Fservicer for the Model 6210 radiographic table and Model S2 and S3 cystometric tables, and 4) to include requirements for assessment of contractors, consultants, and evaluation of the current contract QA\u002FRA consultant. You state that appropriate staff has received training on the revised SOPs and forms. You have not completed the assessment and evaluation of the contract repair\u002Fservicer and your current contract Quality Assurance &amp; Regulatory Affairs consultant. Additionally, you have not conducted a retrospective review of related documentation to ensure compliance with updated procedures. Although your firm’s responses state that you have updated the Supplier Evaluation procedures, the revised procedures were not included for our evaluation.\u003C\u002Fp>\n\n\u003Cp>2. Failure to establish and maintain procedures for receiving, reviewing, and evaluating complaints by a formally designated unit, as required by 21 CFR 820.198(a). Specifically, your firm’s procedure, Process description deviation management, Rev 1, dated November 25, 2020, fails to define requirements for review of complaints to determine if they should be evaluated for Medical Device Reporting. Additionally, your firm’s complaint records do not consistently include the dates and results of investigation (e.g., covering failures involving welding breakages and safety switches). Further, a review of a sampling of complaint records found five of five records do not list the Unique Device Identification (UDI) code for the subject devices.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm’s responses dated June 1, 2023, August 11, 2023, and September 1, 2023, and conclude that they are not adequate. Your firm’s responses state that you have revised the complaint handling SOP to require dates and results of investigations and UDI code for subject devices. You also state that you have revised several forms including CAPA form and Non-Conformance Report form and trained the staff on the revised SOPs and forms. Also, you have not completed a review of complaints per the revised procedure to evaluate reportability for Medical Device Reporting and have not conducted a retrospective review of related documentation to ensure compliance with updated procedures. Although your responses state that you have updated the complaint handling procedures, the revised procedures were not included for our evaluation.\u003C\u002Fp>\n\n\u003Cp>3. Failure to establish and maintain procedures to ensure that the design requirements relating to a device are appropriate and address the intended use of the device, including the needs of the user and patient, as required by 21 CFR 820.30(c). Specifically, your firm does not have procedures for defining a mechanism to resolve incomplete, ambiguous, or conflicting design requirements.\u003C\u002Fp>\n\n\u003Cp>As of September 13, 2023, you have not provided a response to this observation.\u003C\u002Fp>\n\n\u003Cp>4. Failure to establish and maintain procedures for validating the device design under defined operating conditions on initial production units, lots, or batches, or their equivalents, as required by 21 CFR 820.30(g). Specifically, your firm’s design validation procedure, Rev 1, dated January 22, 2021, does not fully define requirements to ensure devices are designed to meet user needs and intended uses. For example, the procedure fails to a) require the evaluation to be carried out on initial production units or their equivalents; b) require the evaluation to be carried out under actual or simulated use conditions.\u003C\u002Fp>\n\n\u003Cp>As of September 13, 2023, you have not provided a response to this observation.\u003C\u002Fp>\n\n\u003Cp>5. Failure to establish and maintain procedures for the identification, documentation, validation or where appropriate verification, review, and approval of design changes before their implementation, as required by 21 CFR 820.30(i). Specifically, your firm does not have procedures for defining control for changes to existing device design requirements and design results, to include a) describing the changes and the reason for the changes; b) determining the need to verify and\u002For validate the changes; c) determining impact on the design risk analysis; d) determine any new regulatory requirements, such as premarket clearance or approval, as needed.\u003C\u002Fp>\n\n\u003Cp>As of September 13, 2023, you have not provided a response to this observation.\u003C\u002Fp>\n\n\u003Cp>6. Failure to establish and maintain procedures to control all documents, as required by 21 CFR 820.40. Specifically, your firm’s document controls procedure, Rev 1, dated December 15, 2020, does not require the approval of quality system documents to include the signature of the approving personnel and the date of that signature. Additionally, your firm has not fully implemented the current document controls procedure, which requires that you assign a unique document number to each quality system document, as multiple procedures do not feature a unique document number.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm’s responses dated June 1, 2023, August 11, 2023, and September 1, 2023, and conclude that they are not adequate. Your firm’s responses state that you have revised the document controls SOP to implement Acrobat sign and included the requirement of signature of approving personnel and date on the approval of quality system documents, as well as to include a unique document number to each quality system document. However, you have not conducted a retrospective review of related documentation to ensure compliance with updated procedures. Although your response states that you have updated the document controls procedures, the revised procedures were not included for our evaluation.\u003C\u002Fp>\n\n\u003Cp>Other federal agencies may take your compliance with the FD&amp;C Act and its implementation regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed.\u003C\u002Fp>\n\n\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, including an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective action (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Please provide a translation of documentation not in English to facilitate our review. We will notify you regarding the adequacy of your firm’s response(s) and the need to re-inspect your firm’s facility to verify that the appropriate corrections and\u002For corrective actions have been made. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\n\n\u003Cp>Your firm’s response should be sent via email to CDRHWarningLetterResponses@fda.hhs.gov. Refer to CMS case #667325 when replying. If you have any questions about the contents of this letter, please contact: Lu Jiang at +1(240)402-5779.\u003C\u002Fp>\n\n\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\u003C\u002Fp>\n\n\u003Cp>Sincerely,\u003Cbr>\n\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>Robert Ochs, Ph.D.\u003Cbr>\nDirector\u003Cbr>\nOHT8: Office of Radiological Health\u003Cbr>\nOffice of Product Evaluation and Quality\u003Cbr>\nCenter for Devices and Radiological Health\u003C\u002Fp>\n\n\u003Cp>Cc:\u003Cbr>\nGreg Swanson\u003Cbr>\nUS Agent\u003Cbr>\nEmergo Global Representation LLC\u003Cbr>\n2500 Bee Cave Road, Building 1, Suite 300\u003Cbr>\nAustin, Texas 78746\u003Cbr>\nUSAgent@UL.com\u003C\u002Fp>\n\n\n\n\n\n\n\n              \n                                            \n              \n            ","Product:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nPelin Sari\n\nRecipient Title\n\nChief Executive Officer\n\nSonesta Medical AB\n\nIndustrivagen 7\n\n171 48 Solna\n\nSweden\n\n(b)(6)@sonestamedical.se\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nSecondary Issuing Offices\n\nUnited States\n\nWARNING LETTER\n\nSeptember 22, 2023\n\nDear Ms. Sari:\n\nDuring an inspection of your firm located in Solna, Sweden on June 5, 2023, through June 7, 2023, an investigator from the United States Food and Drug Administration (FDA) determined that your firm manufactures the Model 6210 radiographic table and Model S2 and S3 cystometric tables. Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or function of the body.\n\nThis inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. We received responses from you dated June 1, 2023, August 11, 2023, and September 1, 2023, concerning our investigator’s observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, which was issued to your firm. We address these responses below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\n\n1. Failure to establish and maintain procedures to ensure that all purchased or otherwise received product and services conform to specific requirements, as required by 21 CFR 820.50(a). Specifically, your firm’s current purchasing controls procedure, Supplier Evaluation, Rev 2, dated April 7, 2021, fails to define the frequency, type, and extent of control to exercise over suppliers, contractors, and consultants, based on the results of periodic evaluation. Additionally, your firm has not evaluated your contract repair\u002Fservicer, and the current contract Quality Assurance & Regulatory Affairs consultant. Further, your firm failed to maintain records covering evaluation of the current contract Quality Assurance & Regulatory Affairs consultant, who has been assisting your firm in overseeing and maintaining their Quality System procedures since the year 2020.\n\nWe reviewed your firm’s responses dated June 1, 2023, August 11, 2023, and September 1, 2023, and conclude that they are not adequate. Your firm’s responses state that you have revised the Supplier Evaluation SOP 1) to include the frequency and\u002For period for evaluation of suppliers, contractors, and consultants, 2) to include the type and extent of control to exercise over suppliers, contractors and consultants based on the results of the periodic evaluation, 3) to include evaluation of the contract repair\u002Fservicer for the Model 6210 radiographic table and Model S2 and S3 cystometric tables, and 4) to include requirements for assessment of contractors, consultants, and evaluation of the current contract QA\u002FRA consultant. You state that appropriate staff has received training on the revised SOPs and forms. You have not completed the assessment and evaluation of the contract repair\u002Fservicer and your current contract Quality Assurance & Regulatory Affairs consultant. Additionally, you have not conducted a retrospective review of related documentation to ensure compliance with updated procedures. Although your firm’s responses state that you have updated the Supplier Evaluation procedures, the revised procedures were not included for our evaluation.\n\n2. Failure to establish and maintain procedures for receiving, reviewing, and evaluating complaints by a formally designated unit, as required by 21 CFR 820.198(a). Specifically, your firm’s procedure, Process description deviation management, Rev 1, dated November 25, 2020, fails to define requirements for review of complaints to determine if they should be evaluated for Medical Device Reporting. Additionally, your firm’s complaint records do not consistently include the dates and results of investigation (e.g., covering failures involving welding breakages and safety switches). Further, a review of a sampling of complaint records found five of five records do not list the Unique Device Identification (UDI) code for the subject devices.\n\nWe reviewed your firm’s responses dated June 1, 2023, August 11, 2023, and September 1, 2023, and conclude that they are not adequate. Your firm’s responses state that you have revised the complaint handling SOP to require dates and results of investigations and UDI code for subject devices. You also state that you have revised several forms including CAPA form and Non-Conformance Report form and trained the staff on the revised SOPs and forms. Also, you have not completed a review of complaints per the revised procedure to evaluate reportability for Medical Device Reporting and have not conducted a retrospective review of related documentation to ensure compliance with updated procedures. Although your responses state that you have updated the complaint handling procedures, the revised procedures were not included for our evaluation.\n\n3. Failure to establish and maintain procedures to ensure that the design requirements relating to a device are appropriate and address the intended use of the device, including the needs of the user and patient, as required by 21 CFR 820.30(c). Specifically, your firm does not have procedures for defining a mechanism to resolve incomplete, ambiguous, or conflicting design requirements.\n\nAs of September 13, 2023, you have not provided a response to this observation.\n\n4. Failure to establish and maintain procedures for validating the device design under defined operating conditions on initial production units, lots, or batches, or their equivalents, as required by 21 CFR 820.30(g). Specifically, your firm’s design validation procedure, Rev 1, dated January 22, 2021, does not fully define requirements to ensure devices are designed to meet user needs and intended uses. For example, the procedure fails to a) require the evaluation to be carried out on initial production units or their equivalents; b) require the evaluation to be carried out under actual or simulated use conditions.\n\nAs of September 13, 2023, you have not provided a response to this observation.\n\n5. Failure to establish and maintain procedures for the identification, documentation, validation or where appropriate verification, review, and approval of design changes before their implementation, as required by 21 CFR 820.30(i). Specifically, your firm does not have procedures for defining control for changes to existing device design requirements and design results, to include a) describing the changes and the reason for the changes; b) determining the need to verify and\u002For validate the changes; c) determining impact on the design risk analysis; d) determine any new regulatory requirements, such as premarket clearance or approval, as needed.\n\nAs of September 13, 2023, you have not provided a response to this observation.\n\n6. Failure to establish and maintain procedures to control all documents, as required by 21 CFR 820.40. Specifically, your firm’s document controls procedure, Rev 1, dated December 15, 2020, does not require the approval of quality system documents to include the signature of the approving personnel and the date of that signature. Additionally, your firm has not fully implemented the current document controls procedure, which requires that you assign a unique document number to each quality system document, as multiple procedures do not feature a unique document number.\n\nWe reviewed your firm’s responses dated June 1, 2023, August 11, 2023, and September 1, 2023, and conclude that they are not adequate. Your firm’s responses state that you have revised the document controls SOP to implement Acrobat sign and included the requirement of signature of approving personnel and date on the approval of quality system documents, as well as to include a unique document number to each quality system document. However, you have not conducted a retrospective review of related documentation to ensure compliance with updated procedures. Although your response states that you have updated the document controls procedures, the revised procedures were not included for our evaluation.\n\nOther federal agencies may take your compliance with the FD&C Act and its implementation regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed.\n\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, including an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective action (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Please provide a translation of documentation not in English to facilitate our review. We will notify you regarding the adequacy of your firm’s response(s) and the need to re-inspect your firm’s facility to verify that the appropriate corrections and\u002For corrective actions have been made. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration as part of your response.\n\nYour firm’s response should be sent via email to CDRHWarningLetterResponses@fda.hhs.gov. Refer to CMS case #667325 when replying. If you have any questions about the contents of this letter, please contact: Lu Jiang at +1(240)402-5779.\n\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\n\nSincerely,\n\n\u002FS\u002F\n\nRobert Ochs, Ph.D.\n\nDirector\n\nOHT8: Office of Radiological Health\n\nOffice of Product Evaluation and Quality\n\nCenter for Devices and Radiological Health\n\nCc:\n\nGreg Swanson\n\nUS Agent\n\nEmergo Global Representation LLC\n\n2500 Bee Cave Road, Building 1, Suite 300\n\nAustin, Texas 78746\n\nUSAgent@UL.com","Sonesta Medical AB","sonesta-medical-ab-667325-09222023","2026-08-18T06:42:28.994808+00:00","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fsonesta-medical-ab-667325-09222023","2026-10-26T08:10:01.487143+00:00","Closed Out","2023-12-26","667325","2024-02-28","Pelin Sari","2026-08-20T00:25:09.984+00:00","2023-09-22",{"id":77,"raw":78,"subject":82,"body_html":83,"body_text":84,"firm_name":85,"letter_id":86,"created_at":45,"fei_number":19,"letter_url":87,"updated_at":88,"action_type":22,"case_status":23,"posted_date":89,"marcs_cms_no":90,"product_type":50,"closeout_date":19,"issuing_office":38,"recipient_name":91,"body_fetched_at":92,"delivery_method":93,"recipient_title":19,"reference_number":19,"action_taken_date":94,"medical_device_id":19,"response_letter_date":19},1030,[79,80,81,38,82,13,13,13],"\u003Ctime datetime=\"2025-03-11T04:00:00Z\">03\u002F11\u002F2025\u003C\u002Ftime>\n","\u003Ctime datetime=\"2025-02-05T05:00:00Z\">02\u002F05\u002F2025\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fqapel-medical-inc-699244-02052025\">Q’Apel Medical, Inc.\u003C\u002Fa>","Investigational Device Exemptions (IDE)\u002FPremarket Approval Application (PMA) Adulterated Device","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>VIA Electronic Mail\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Jodie C. Fam\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>Chief Executive Officer \u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Q’Apel Medical, Inc.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>4245 Technology Drive\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Fremont\u003C\u002Fspan>, \u003Cspan>CA\u003C\u002Fspan> \u003Cspan>94538\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>February 5, 2025\u003C\u002Fp>\u003Cp>Dear Ms. Fam:\u003C\u002Fp>\u003Cp>During an inspection of your firm located in Fremont, CA on July 29, 2024, through August 8, 2024, investigators from the United States Food and Drug Administration (FDA) determined that your firm manufactures the 072 Aspiration System (also marketed under the trade name “HIPPO”). Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\u003C\u002Fp>\u003Cp>FDA has reviewed information collected during the inspection of your firm located in Fremont, California on July 29, 2024, through August 8, 2024, and determined that the 072 Aspiration System (HIPPO) is adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. §351(f)(1)(B), because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption (IDE) under section 520(g) of the Act, 21 U.S.C. § 360j(g), for the device as described and marketed. The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C.\u003C\u002Fp>\u003Cp>Specifically, FDA cleared, under K222786, the device that you identified in your submission to the agency as the 072 Aspiration System with the following indications, “072 Aspiration Catheter: As part of the 072 Aspiration System, the 072 Aspiration Catheter with a compatible suction pump is indicated for use in the revascularization of patients with acute ischemic stroke secondary to intracranial large vessel occlusive disease (within the internal carotid, middle cerebral - M1 and M2 segments, basilar, and vertebral arteries) within 8 hours of symptom onset. Patients who are ineligible for intravenous tissue plasminogen activator (IV t-PA) or who failed IV t-PA therapy are candidates for treatment. Aspiration Tubing: As part of the 072 Aspiration System, the Aspiration Tubing is intended to connect the 072 Aspiration Catheter to a compatible suction pump.” The 072 Aspiration System that was presented to us was cleared under K222786 with a design that included a catheter shaft with an inner diameter of 0.072 inch and an outer diameter of 0.0855 inch for the entire catheter working length. The submission that we numbered K222786 did not describe technological characteristics of the distal nitinol tip that would enable expansion of the distal tip to larger diameters or compression of the distal tip during clinical use. However, your firm’s promotion of the device and information collected during the inspection provides evidence that the device as it was designed and developed but not described in your submission includes a nitinol tip with technological characteristics that allow for expansion in diameter and compression in length, i.e., a device for which your firm lacks clearance or approval. Examples of the promotion and information include:\u003C\u002Fp>\u003Cul>\u003Cli>\u003Cstrong>(b)(4)\u003C\u002Fstrong> data report of tip compression testing (“Hippo Tip Vacuum Ball Testing”) was shared via emails exchanged within Q’Apel Medical \u003Cstrong>(b)(4)\u003C\u002Fstrong>. The data include tip diameter and length measurements of multiple catheter tips (“bad units” and “good units”) while vacuum was applied to a \u003Cstrong>(b)(4)\u003C\u002Fstrong> ball with a diameter larger than the HIPPO distal tip diameter. Multiple images show increased diameters of the distal region of the nitinol tip expanding around the surface of the \u003Cstrong>(b)(4)\u003C\u002Fstrong> ball with reported increases in diameters of \u003Cstrong>(b)(4)\u003C\u002Fstrong> for “good units” and increases in diameter of \u003Cstrong>(b)(4)\u003C\u002Fstrong> for “bad units.” The \u003Cstrong>(b)(4)\u003C\u002Fstrong> data reports tip diameters ranging from \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch with aspiration applied to the \u003Cstrong>(b)(4)\u003C\u002Fstrong> ball, compared to the relaxed tip diameter of \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch to \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch. The \u003Cstrong>(b)(4)\u003C\u002Fstrong> data reports accompanying changes in tip length of \u003Cstrong>(b)(4)\u003C\u002Fstrong> (relaxed tip lengths of \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch, compressed under ball aspiration to lengths of \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch) for “good units” and \u003Cstrong>(b)(4)\u003C\u002Fstrong> (relaxed tip lengths of \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch, compressed under ball aspiration to lengths of \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch) for “bad units.” The distinction of “good units” and “bad units” is not described in the \u003Cstrong>(b)(4)\u003C\u002Fstrong> data. However, both “good units” and “bad units” describe evidence of increased HIPPO distal tip diameters and compressed tip lengths when aspiration was applied to the \u003Cstrong>(b)(4)\u003C\u002Fstrong> balls. The submission K222786 did not provide images or information to show expansion of the distal tantalum markers or compression of tip length of the nitinol tip as shown in the images included in the \u003Cstrong>(b)(4)\u003C\u002Fstrong> data of tip compression testing (“Hippo Tip Vacuum Ball Testing”).\u003C\u002Fli>\u003Cli>The “\u003Cstrong>(b)(4)\u003C\u002Fstrong>” includes a video on page 35 of 45 titled “Mechanism of action,” that shows the nitinol tip of the HIPPO catheter aspirating a simulated clot. The video shows the catheter tip compress near the mid-point of the nitinol tip structure (with possible increased diameter), while the distal tantalum petal markers are obscured by the simulated clot. A second distinct slow-motion video also titled, “Mechanism of action,” is included on page 36 of 45 of the “\u003Cstrong>(b)(4)\u003C\u002Fstrong>” that shows the nitinol tip of the HIPPO catheter aspirating a simulated clot. This video shows the HIPPO catheter tip prior to contact with the simulated clot and upon contact with the simulated clot, the distal tantalum petal markers on the most distal struts of the nitinol tip are shown to flare at the edges combined with longitudinal compression of the nitinol tip while aspiration is applied to the clot until the clot is fully ingested through the catheter lumen. Page 37 of 45 of the “\u003Cstrong>(b)(4)\u003C\u002Fstrong>” includes a slow-motion video titled, “Mechanism of action: RED 72,” that shows aspiration of simulated clot with the cleared RED 72 Reperfusion Catheter (K211654) that was cited as a reference device during review of K222786 for the 072 Aspiration System (HIPPO). The video of the RED 72 Reperfusion Catheter does not show compression of the catheter tip or expansion of the distal catheter tip as observed in the videos of the HIPPO device on pages 35 and 36 of 45 of the “\u003Cstrong>(b)(4)\u003C\u002Fstrong>.” Page 45 of 45 of the “\u003Cstrong>(b)(4)\u003C\u002Fstrong>” also includes a claim that the HIPPO provides “insightful navigation from a tip that flexes to any clot morphology.” The submission K222786 of the 072 Aspiration System (HIPPO) did not provide images that showed compression of the nitinol tip nor flaring of the distal petals of the nitinol tip as shown in videos presented in the “\u003Cstrong>(b)(4)\u003C\u002Fstrong>.”\u003Cbr>• Drawing CS00788, “072 Catheter Nitinol Tip,” descriptions in the “Design History” notes that revision E updates included, “\u003Cstrong>(b)(4)\u003C\u002Fstrong>.” The version of the drawing provided in K222786\u002FS001, Appendix 27, was revision D and did not include descriptions of \u003Cstrong>(b)(4)\u003C\u002Fstrong> specification changes or “\u003Cstrong>(b)(4)\u003C\u002Fstrong> compression testing with tip compression tool.” The “\u003Cstrong>(b)(4)\u003C\u002Fstrong>, CS 00788 Catheter Nitinol Tip,” document number QI 01560 describes \u003Cstrong>(b)(4)\u003C\u002Fstrong>. The images and test methods for compression of the nitinol tip were not described in drawing CS00788, revision D, provided in K222786. The submission K222786 otherwise did not provide images that showed compression of the nitinol tip as described in document QI 01560.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>During review of K222786, FDA asked for a description of the principle of operation and mechanism of action of the 072 Aspiration Catheter distal tip, including the tip dimensions related to the dimensions of the remainder of the catheter shaft, in the Refuse-to-Accept (RTA) notification dated September 30, 2022. The response provided in the document “002_Cover Letter_RTA_Final.pdf” of the K222786\u002FS001 submission dated October 24, 2022, stated that the 072 Aspiration Catheter tip had “\u003Cem>the same Internal (0.072”) and External (0.0855”) dimensions (ID, OD) as the rest of the catheter’s usable length. The length of the tip is \u003Cstrong>(b)(4)\u003C\u002Fstrong>”. The flexible tip is a passive structure that does not have an active mechanism of action and is not self-expanding\u003C\u002Fem>.” The information gathered in the inspection conducted July 29, 2024, through August 8, 2024, at your firm raises concerns that the information provided to FDA for review in K222786 did not accurately disclose the technological characteristics of the nitinol tip and the changes in diameter and length of the distal tip that could be exhibited during use conditions for aspiration of thrombus from patients experiencing acute ischemic stroke. These different technological characteristics of the nitinol tip to change in length and diameter constitute a change or modification in the device that could significantly affect the safety or effectiveness of the device (e.g., a significant change or modification in design, material, chemical composition, energy source, or manufacturing process) (21 CFR 807.81(a)(3)).\u003C\u002Fp>\u003Cp>For a device requiring premarket approval, the notification required by section 510(k) of the Act, 21 U.S.C. § 360(k), is deemed satisfied when a PMA is pending before the FDA. See 21 CFR 807.81(b). The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\u003C\u002Fp>\u003Cp>Our office requests that Q’Apel Medical cease any activities that result in the misbranding or adulteration of the 072 Aspiration System (HIPPO), such as the commercial distribution of the device for the uses discussed above.\u003C\u002Fp>\u003Cp>This inspection also revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, \u003Cu>Code of Federal Regulations\u003C\u002Fu> (CFR), Part 820.\u003C\u002Fp>\u003Cp>We received response from Jim Talbot, Vice President Regulatory, Quality, and Clinical Affairs dated August 28, 2024, September 26, 2024, and November 27, 2024, concerning our investigator’s observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, that was issued to your firm. We address this response below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\u003C\u002Fp>\u003Cp>1. Failure to adequately document design input requirements as required by 21 CFR 820.30(c).\u003C\u002Fp>\u003Cp>For example, your firm did not adequately define the physical, performance, and other design requirements for design inputs to include tip compression, aspiration\u002Fsuction pump, tip deflection, and treatment location for your firm’s 072 Aspiration System (Hippo), which are identified in your documents titled, Product Specification 072 Aspiration System (PS 00922, Rev. G) and Customer Requirement Specification Form (CRS 00848, Rev. D).\u003C\u002Fp>\u003Cp>We reviewed your firm’s response and conclude that it is not adequate. Your firm has not adequately defined specifications for tip elongation and compression (PS-11.5.2), aspiration flow rate (PS-11.5.3) and tip deflection (PS-11.5.9) that are identified in your document titled, Product Specification, PS 00922, Revision H.\u003C\u002Fp>\u003Cp>Your firm provided the document titled, Draft Research Report, Aspiration System, Aspiration Flowrate Acceptance Criteria, RR 02139, in your response dated August 28, 2024. This document appears to leverage previous testing of the Aspiration flowrate to define measurable acceptance criteria for future Aspiration Flowrate testing. The comparative device testing was conducted on a sample size of three \u003Cstrong>(b)(4)\u003C\u002Fstrong>. The conclusion states an acceptance interval for the average flow rate is \u003Cstrong>(b)(4)\u003C\u002Fstrong>. This value was not reflected in your Product Specification documentation or the Test Protocol, TP 00927, which is to be executed for future verification testing by a third-party service provider. It is not clear what this data will be used for.\u003C\u002Fp>\u003Cp>Please evaluate the adequacy of your corrective actions related to design inputs and continue to provide us information related to your ongoing corrective actions.\u003C\u002Fp>\u003Cp>2. Failure to adequately establish and maintain procedures for design verification as required by 21 CFR 820.30(f).\u003C\u002Fp>\u003Cp>For example, your firm did not adequately define acceptance criteria that can be verified for Aspiration Flowrate, Tip Deflection, and Tip Compression and Elongation in your protocol titled, Test Protocol, Device Performance Design Verification Validation, FG 00806, FG 00995 (TP 00927, Rev. C).\u003C\u002Fp>\u003Cp>Additionally, the verification test performed for Aspiration Flowrate and documented in Test Report 072 Aspiration System, Design Verification Validation, FG00806, FG 00995, Aspiration Flowrate (TR 00927-15, Rev. A), was conducted using \u003Cstrong>(b)(4)\u003C\u002Fstrong> vacuum setting, whereas the Instructions for Use for the device describes \u003Cstrong>(b)(4)\u003C\u002Fstrong> vacuum settings the device can be used with. There is no documented rationale to justify why testing flowrate at \u003Cstrong>(b)(4)\u003C\u002Fstrong> setting is adequate.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response and conclude that it is not adequate. Your firm still has not implemented your design control procedure, in that your design verification protocol continues to not establish acceptance criteria for specifications to include tip deflection, elongation and compression, and aspiration flow rate that can be verified. Additionally, your firm’s rationale for testing a \u003Cstrong>(b)(4)\u003C\u002Fstrong> vacuum pressure is inadequate. Verification testing should be performed for all \u003Cstrong>(b)(4)\u003C\u002Fstrong> ranges utilized by the device.\u003C\u002Fp>\u003Cp>Your firm stated that you are \u003Cstrong>(b)(4)\u003C\u002Fstrong>. However, the Test Report has not been provided to FDA.\u003C\u002Fp>\u003Cp>Please evaluate the adequacy of your corrective actions related to design verification and continue to provide us information related to your ongoing corrective actions.\u003C\u002Fp>\u003Cp>3. Failure to adequately establish and maintain procedures for design change as required by 21 CFR 820.30(i).\u003C\u002Fp>\u003Cp>For example, your firm has not implemented your procedure for design changes titled, Design Control (SOP 00003, Rev. C, effective date 02\u002F01\u002F2021 &amp; Rev. D, effective date 11\u002F14\u002F2022) (revisions in effect when design changes were processed), which states that design changes are subject to original verification or validation tests and if no test(s) or a subset is planned, a justification is required. Specifically, your firm has not evaluated the impact changes may have to original verification or validation tests or provided a justification if no test(s) or a subset is required. Design changes were made to update the specification for your 072 Cather, Nitinol Tip \u003Cstrong>(b)(4)\u003C\u002Fstrong> (under ECO 1142) and to update the \u003Cstrong>(b)(4)\u003C\u002Fstrong> specification (under ECO 1360) \u003Cstrong>(b)(4)\u003C\u002Fstrong> acceptability range \u003Cstrong>(b)(4)\u003C\u002Fstrong>. No assessment was documented of the potential impact the changes could have on completed verification and\u002For validation tests.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response and conclude that it is not adequate. Your firm’s reevaluation of ECO 1360 states that the firm’s risk management document, RM 00951, Design FMEA, 072 Aspiration System, was updated in ECO 1300 to capture the new risk identified with SA 00570 \u003Cstrong>(b)(4)\u003C\u002Fstrong>. It further states that testing was performed via \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm determined that verification and\u002For validation testing was not required. This assessment is inadequate. Testing should be documented and performed according to a defined protocol.\u003C\u002Fp>\u003Cp>Please evaluate the adequacy of your corrective actions related to design changes and continue to provide us information related to your ongoing corrective actions.\u003C\u002Fp>\u003Cp>4. Failure to adequately establish and maintain procedures for receiving, reviewing, and evaluating complaints by a formally designated unit as required by 21 CFR 820.198(a).\u003C\u002Fp>\u003Cp>For example, your firm has not adequately implemented your complaint procedure, Complaint Handling and Customer Feedback (SOP 00148, Rev. M, effective date 02\u002F27\u002F2024), which requires returned product analysis to be completed within 30 days after receiving the product from the field. Specifically,\u003C\u002Fp>\u003Cul>\u003Cli>CN 0251 was opened to document a complaint reporting resistance was felt while the Hippo 072 Aspiration Catheter was inside an access catheter. The associated complaint product was received by your firm on 06\u002F12\u002F2024 under RMA0494 and logged in RMA log. As of 08\u002F02\u002F2024 the complaint product has not been investigated.\u003C\u002Fli>\u003Cli>CN 0252 was opened to document a complaint reporting stretching on the distal portion of the 072 Aspiration Tubing. The associated complaint product was received by your firm on 06\u002F27\u002F2024 under RMA0493 and logged in RMA log. As of 08\u002F02\u002F2024 the complaint product has not been investigated.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>We reviewed your firm’s response and conclude that it is not adequate. Removing the 30-day timeframe for completing the returned product analysis may impact your firm’s assessment of complaints that are determined to be malfunctions and thus your firm’s adherence to reporting timeframes required as part of the Medical Device Reporting (MDR) Regulation (see 21 CFR Part 803). Your firm should provide a risk-based justification for the removal of the requirement and evaluate complaints to determine if any unreported MDRs were found.\u003C\u002Fp>\u003Cp>5. Failure to adequately establish and maintain procedures for document control as required by 21 CFR 820.40.\u003C\u002Fp>\u003Cp>For example, your firm did not adequately implement your document control procedures as outlined in \u003Cstrong>(b)(4)\u003C\u002Fstrong> (SOP 00002, Rev. R, effective date 05\u002F24\u002F2024 (current revision), Rev. P, effective date 02\u002F02\u002F2024, and Rev. N, effective date 07\u002F14\u002F2023. Section 6.1 of your procedure titled \u003Cstrong>(b)(4)\u003C\u002Fstrong> (SOP 00460, Rev, A, effective date 9\u002F14\u002F2020) \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Specifically, the following promotional material for the 072 Aspiration System (Hippo) was not developed and approved per the firm’s document control procedures:\u003C\u002Fp>\u003Cul>\u003Cli>A video clip depicting the tip of the Hippo aspiration catheter flaring out\u003C\u002Fli>\u003Cli>A video clip referring the to the Hippo aspiration catheter tip as adaptive, depicting the tip of the Hippo aspiration catheter flaring out, and referencing R&amp;D Aspiration Grip Force data\u003C\u002Fli>\u003Cli>A press release announcing the clearance of the Hippo 072 Aspiration System that describes the aspiration tip as adaptive\u003C\u002Fli>\u003C\u002Ful>\u003Cp>We reviewed your firm’s response and cannot determine the adequacy at this time. Your firm extended the target completion date to 11\u002F25\u002F2025, for compiling of a list of marketing\u002F promotional content for their Armadillo and Walrus devices and evaluating if product claims were found. \u003Cstrong>(b)(4)\u003C\u002Fstrong>; therefore, we request that you continue to provide information related to the \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fp>\u003Cp>Your firm should take prompt action to address any violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\u003C\u002Fp>\u003Cp>Other federal agencies may take your compliance with the FD&amp;C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\u003C\u002Fp>\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\u003Cp>Your firm’s response should be sent via e-mail to: Jessica Mu, Assistant Director at CDRHWarningLetterResponses@fda.hhs.gov. Refer to the Unique Identification Number, \u003Cstrong>CMS # 699244\u003C\u002Fstrong>, when replying. If you have any questions about the contents of this letter, please contact: Shaquenta Perkins at shaquenta.perkins@fda.hhs.gov or 619-941-3763.\u003C\u002Fp>\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\u003C\u002Fp>\u003Cp>Sincerely yours,\u003Cbr>\u002FS\u002F\u003C\u002Fp>\u003Cp>RDML Sean M. Boyd, MPH, USPHS\u003Cbr>Director\u003Cbr>Office of Regulatory Programs\u003Cbr>Office of Product Evaluation and Quality\u003Cbr>Center for Devices and Radiological Health\u003C\u002Fp>\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVIA Electronic Mail\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nJodie C. Fam\n\nRecipient Title\n\nChief Executive Officer\n\nQ’Apel Medical, Inc.\n\n4245 Technology Drive\n\nFremont, CA 94538\n\nUnited States\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nWARNING LETTER\nFebruary 5, 2025\nDear Ms. Fam:\nDuring an inspection of your firm located in Fremont, CA on July 29, 2024, through August 8, 2024, investigators from the United States Food and Drug Administration (FDA) determined that your firm manufactures the 072 Aspiration System (also marketed under the trade name “HIPPO”). Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\nFDA has reviewed information collected during the inspection of your firm located in Fremont, California on July 29, 2024, through August 8, 2024, and determined that the 072 Aspiration System (HIPPO) is adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. §351(f)(1)(B), because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption (IDE) under section 520(g) of the Act, 21 U.S.C. § 360j(g), for the device as described and marketed. The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C.\nSpecifically, FDA cleared, under K222786, the device that you identified in your submission to the agency as the 072 Aspiration System with the following indications, “072 Aspiration Catheter: As part of the 072 Aspiration System, the 072 Aspiration Catheter with a compatible suction pump is indicated for use in the revascularization of patients with acute ischemic stroke secondary to intracranial large vessel occlusive disease (within the internal carotid, middle cerebral - M1 and M2 segments, basilar, and vertebral arteries) within 8 hours of symptom onset. Patients who are ineligible for intravenous tissue plasminogen activator (IV t-PA) or who failed IV t-PA therapy are candidates for treatment. Aspiration Tubing: As part of the 072 Aspiration System, the Aspiration Tubing is intended to connect the 072 Aspiration Catheter to a compatible suction pump.” The 072 Aspiration System that was presented to us was cleared under K222786 with a design that included a catheter shaft with an inner diameter of 0.072 inch and an outer diameter of 0.0855 inch for the entire catheter working length. The submission that we numbered K222786 did not describe technological characteristics of the distal nitinol tip that would enable expansion of the distal tip to larger diameters or compression of the distal tip during clinical use. However, your firm’s promotion of the device and information collected during the inspection provides evidence that the device as it was designed and developed but not described in your submission includes a nitinol tip with technological characteristics that allow for expansion in diameter and compression in length, i.e., a device for which your firm lacks clearance or approval. Examples of the promotion and information include:\n(b)(4) data report of tip compression testing (“Hippo Tip Vacuum Ball Testing”) was shared via emails exchanged within Q’Apel Medical (b)(4). The data include tip diameter and length measurements of multiple catheter tips (“bad units” and “good units”) while vacuum was applied to a (b)(4) ball with a diameter larger than the HIPPO distal tip diameter. Multiple images show increased diameters of the distal region of the nitinol tip expanding around the surface of the (b)(4) ball with reported increases in diameters of (b)(4) for “good units” and increases in diameter of (b)(4) for “bad units.” The (b)(4) data reports tip diameters ranging from (b)(4) inch with aspiration applied to the (b)(4) ball, compared to the relaxed tip diameter of (b)(4) inch to (b)(4) inch. The (b)(4) data reports accompanying changes in tip length of (b)(4) (relaxed tip lengths of (b)(4) inch, compressed under ball aspiration to lengths of (b)(4) inch) for “good units” and (b)(4) (relaxed tip lengths of (b)(4) inch, compressed under ball aspiration to lengths of (b)(4) inch) for “bad units.” The distinction of “good units” and “bad units” is not described in the (b)(4) data. However, both “good units” and “bad units” describe evidence of increased HIPPO distal tip diameters and compressed tip lengths when aspiration was applied to the (b)(4) balls. The submission K222786 did not provide images or information to show expansion of the distal tantalum markers or compression of tip length of the nitinol tip as shown in the images included in the (b)(4) data of tip compression testing (“Hippo Tip Vacuum Ball Testing”).\nThe “(b)(4)” includes a video on page 35 of 45 titled “Mechanism of action,” that shows the nitinol tip of the HIPPO catheter aspirating a simulated clot. The video shows the catheter tip compress near the mid-point of the nitinol tip structure (with possible increased diameter), while the distal tantalum petal markers are obscured by the simulated clot. A second distinct slow-motion video also titled, “Mechanism of action,” is included on page 36 of 45 of the “(b)(4)” that shows the nitinol tip of the HIPPO catheter aspirating a simulated clot. This video shows the HIPPO catheter tip prior to contact with the simulated clot and upon contact with the simulated clot, the distal tantalum petal markers on the most distal struts of the nitinol tip are shown to flare at the edges combined with longitudinal compression of the nitinol tip while aspiration is applied to the clot until the clot is fully ingested through the catheter lumen. Page 37 of 45 of the “(b)(4)” includes a slow-motion video titled, “Mechanism of action: RED 72,” that shows aspiration of simulated clot with the cleared RED 72 Reperfusion Catheter (K211654) that was cited as a reference device during review of K222786 for the 072 Aspiration System (HIPPO). The video of the RED 72 Reperfusion Catheter does not show compression of the catheter tip or expansion of the distal catheter tip as observed in the videos of the HIPPO device on pages 35 and 36 of 45 of the “(b)(4).” Page 45 of 45 of the “(b)(4)” also includes a claim that the HIPPO provides “insightful navigation from a tip that flexes to any clot morphology.” The submission K222786 of the 072 Aspiration System (HIPPO) did not provide images that showed compression of the nitinol tip nor flaring of the distal petals of the nitinol tip as shown in videos presented in the “(b)(4).”\n• Drawing CS00788, “072 Catheter Nitinol Tip,” descriptions in the “Design History” notes that revision E updates included, “(b)(4).” The version of the drawing provided in K222786\u002FS001, Appendix 27, was revision D and did not include descriptions of (b)(4) specification changes or “(b)(4) compression testing with tip compression tool.” The “(b)(4), CS 00788 Catheter Nitinol Tip,” document number QI 01560 describes (b)(4). The images and test methods for compression of the nitinol tip were not described in drawing CS00788, revision D, provided in K222786. The submission K222786 otherwise did not provide images that showed compression of the nitinol tip as described in document QI 01560.\nDuring review of K222786, FDA asked for a description of the principle of operation and mechanism of action of the 072 Aspiration Catheter distal tip, including the tip dimensions related to the dimensions of the remainder of the catheter shaft, in the Refuse-to-Accept (RTA) notification dated September 30, 2022. The response provided in the document “002_Cover Letter_RTA_Final.pdf” of the K222786\u002FS001 submission dated October 24, 2022, stated that the 072 Aspiration Catheter tip had “the same Internal (0.072”) and External (0.0855”) dimensions (ID, OD) as the rest of the catheter’s usable length. The length of the tip is (b)(4)”. The flexible tip is a passive structure that does not have an active mechanism of action and is not self-expanding.” The information gathered in the inspection conducted July 29, 2024, through August 8, 2024, at your firm raises concerns that the information provided to FDA for review in K222786 did not accurately disclose the technological characteristics of the nitinol tip and the changes in diameter and length of the distal tip that could be exhibited during use conditions for aspiration of thrombus from patients experiencing acute ischemic stroke. These different technological characteristics of the nitinol tip to change in length and diameter constitute a change or modification in the device that could significantly affect the safety or effectiveness of the device (e.g., a significant change or modification in design, material, chemical composition, energy source, or manufacturing process) (21 CFR 807.81(a)(3)).\nFor a device requiring premarket approval, the notification required by section 510(k) of the Act, 21 U.S.C. § 360(k), is deemed satisfied when a PMA is pending before the FDA. See 21 CFR 807.81(b). The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\nOur office requests that Q’Apel Medical cease any activities that result in the misbranding or adulteration of the 072 Aspiration System (HIPPO), such as the commercial distribution of the device for the uses discussed above.\nThis inspection also revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820.\nWe received response from Jim Talbot, Vice President Regulatory, Quality, and Clinical Affairs dated August 28, 2024, September 26, 2024, and November 27, 2024, concerning our investigator’s observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, that was issued to your firm. We address this response below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\n1. Failure to adequately document design input requirements as required by 21 CFR 820.30(c).\nFor example, your firm did not adequately define the physical, performance, and other design requirements for design inputs to include tip compression, aspiration\u002Fsuction pump, tip deflection, and treatment location for your firm’s 072 Aspiration System (Hippo), which are identified in your documents titled, Product Specification 072 Aspiration System (PS 00922, Rev. G) and Customer Requirement Specification Form (CRS 00848, Rev. D).\nWe reviewed your firm’s response and conclude that it is not adequate. Your firm has not adequately defined specifications for tip elongation and compression (PS-11.5.2), aspiration flow rate (PS-11.5.3) and tip deflection (PS-11.5.9) that are identified in your document titled, Product Specification, PS 00922, Revision H.\nYour firm provided the document titled, Draft Research Report, Aspiration System, Aspiration Flowrate Acceptance Criteria, RR 02139, in your response dated August 28, 2024. This document appears to leverage previous testing of the Aspiration flowrate to define measurable acceptance criteria for future Aspiration Flowrate testing. The comparative device testing was conducted on a sample size of three (b)(4). The conclusion states an acceptance interval for the average flow rate is (b)(4). This value was not reflected in your Product Specification documentation or the Test Protocol, TP 00927, which is to be executed for future verification testing by a third-party service provider. It is not clear what this data will be used for.\nPlease evaluate the adequacy of your corrective actions related to design inputs and continue to provide us information related to your ongoing corrective actions.\n2. Failure to adequately establish and maintain procedures for design verification as required by 21 CFR 820.30(f).\nFor example, your firm did not adequately define acceptance criteria that can be verified for Aspiration Flowrate, Tip Deflection, and Tip Compression and Elongation in your protocol titled, Test Protocol, Device Performance Design Verification Validation, FG 00806, FG 00995 (TP 00927, Rev. C).\nAdditionally, the verification test performed for Aspiration Flowrate and documented in Test Report 072 Aspiration System, Design Verification Validation, FG00806, FG 00995, Aspiration Flowrate (TR 00927-15, Rev. A), was conducted using (b)(4) vacuum setting, whereas the Instructions for Use for the device describes (b)(4) vacuum settings the device can be used with. There is no documented rationale to justify why testing flowrate at (b)(4) setting is adequate.\nWe reviewed your firm’s response and conclude that it is not adequate. Your firm still has not implemented your design control procedure, in that your design verification protocol continues to not establish acceptance criteria for specifications to include tip deflection, elongation and compression, and aspiration flow rate that can be verified. Additionally, your firm’s rationale for testing a (b)(4) vacuum pressure is inadequate. Verification testing should be performed for all (b)(4) ranges utilized by the device.\nYour firm stated that you are (b)(4). However, the Test Report has not been provided to FDA.\nPlease evaluate the adequacy of your corrective actions related to design verification and continue to provide us information related to your ongoing corrective actions.\n3. Failure to adequately establish and maintain procedures for design change as required by 21 CFR 820.30(i).\nFor example, your firm has not implemented your procedure for design changes titled, Design Control (SOP 00003, Rev. C, effective date 02\u002F01\u002F2021 & Rev. D, effective date 11\u002F14\u002F2022) (revisions in effect when design changes were processed), which states that design changes are subject to original verification or validation tests and if no test(s) or a subset is planned, a justification is required. Specifically, your firm has not evaluated the impact changes may have to original verification or validation tests or provided a justification if no test(s) or a subset is required. Design changes were made to update the specification for your 072 Cather, Nitinol Tip (b)(4) (under ECO 1142) and to update the (b)(4) specification (under ECO 1360) (b)(4) acceptability range (b)(4). No assessment was documented of the potential impact the changes could have on completed verification and\u002For validation tests.\nWe reviewed your firm’s response and conclude that it is not adequate. Your firm’s reevaluation of ECO 1360 states that the firm’s risk management document, RM 00951, Design FMEA, 072 Aspiration System, was updated in ECO 1300 to capture the new risk identified with SA 00570 (b)(4). It further states that testing was performed via (b)(4). Your firm determined that verification and\u002For validation testing was not required. This assessment is inadequate. Testing should be documented and performed according to a defined protocol.\nPlease evaluate the adequacy of your corrective actions related to design changes and continue to provide us information related to your ongoing corrective actions.\n4. Failure to adequately establish and maintain procedures for receiving, reviewing, and evaluating complaints by a formally designated unit as required by 21 CFR 820.198(a).\nFor example, your firm has not adequately implemented your complaint procedure, Complaint Handling and Customer Feedback (SOP 00148, Rev. M, effective date 02\u002F27\u002F2024), which requires returned product analysis to be completed within 30 days after receiving the product from the field. Specifically,\nCN 0251 was opened to document a complaint reporting resistance was felt while the Hippo 072 Aspiration Catheter was inside an access catheter. The associated complaint product was received by your firm on 06\u002F12\u002F2024 under RMA0494 and logged in RMA log. As of 08\u002F02\u002F2024 the complaint product has not been investigated.\nCN 0252 was opened to document a complaint reporting stretching on the distal portion of the 072 Aspiration Tubing. The associated complaint product was received by your firm on 06\u002F27\u002F2024 under RMA0493 and logged in RMA log. As of 08\u002F02\u002F2024 the complaint product has not been investigated.\nWe reviewed your firm’s response and conclude that it is not adequate. Removing the 30-day timeframe for completing the returned product analysis may impact your firm’s assessment of complaints that are determined to be malfunctions and thus your firm’s adherence to reporting timeframes required as part of the Medical Device Reporting (MDR) Regulation (see 21 CFR Part 803). Your firm should provide a risk-based justification for the removal of the requirement and evaluate complaints to determine if any unreported MDRs were found.\n5. Failure to adequately establish and maintain procedures for document control as required by 21 CFR 820.40.\nFor example, your firm did not adequately implement your document control procedures as outlined in (b)(4) (SOP 00002, Rev. R, effective date 05\u002F24\u002F2024 (current revision), Rev. P, effective date 02\u002F02\u002F2024, and Rev. N, effective date 07\u002F14\u002F2023. Section 6.1 of your procedure titled (b)(4) (SOP 00460, Rev, A, effective date 9\u002F14\u002F2020) (b)(4). Specifically, the following promotional material for the 072 Aspiration System (Hippo) was not developed and approved per the firm’s document control procedures:\nA video clip depicting the tip of the Hippo aspiration catheter flaring out\nA video clip referring the to the Hippo aspiration catheter tip as adaptive, depicting the tip of the Hippo aspiration catheter flaring out, and referencing R&D Aspiration Grip Force data\nA press release announcing the clearance of the Hippo 072 Aspiration System that describes the aspiration tip as adaptive\nWe reviewed your firm’s response and cannot determine the adequacy at this time. Your firm extended the target completion date to 11\u002F25\u002F2025, for compiling of a list of marketing\u002F promotional content for their Armadillo and Walrus devices and evaluating if product claims were found. (b)(4); therefore, we request that you continue to provide information related to the (b)(4).\nYour firm should take prompt action to address any violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\nOther federal agencies may take your compliance with the FD&C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration as part of your response.\nYour firm’s response should be sent via e-mail to: Jessica Mu, Assistant Director at CDRHWarningLetterResponses@fda.hhs.gov. Refer to the Unique Identification Number, CMS # 699244, when replying. If you have any questions about the contents of this letter, please contact: Shaquenta Perkins at shaquenta.perkins@fda.hhs.gov or 619-941-3763.\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\nSincerely yours,\n\u002FS\u002F\nRDML Sean M. Boyd, MPH, USPHS\nDirector\nOffice of Regulatory Programs\nOffice of Product Evaluation and Quality\nCenter for Devices and Radiological Health","Q’Apel Medical, Inc.","qapel-medical-inc-699244-02052025","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fqapel-medical-inc-699244-02052025","2026-10-26T08:09:46.009809+00:00","2025-03-11","699244","Jodie C. Fam","2026-08-19T16:59:01.909+00:00","VIA Electronic Mail","2025-02-05",{"id":96,"raw":97,"subject":101,"body_html":103,"body_text":104,"firm_name":105,"letter_id":106,"created_at":66,"fei_number":19,"letter_url":107,"updated_at":108,"action_type":22,"case_status":69,"posted_date":109,"marcs_cms_no":110,"product_type":50,"closeout_date":111,"issuing_office":38,"recipient_name":112,"body_fetched_at":113,"delivery_method":114,"recipient_title":19,"reference_number":19,"action_taken_date":115,"medical_device_id":19,"response_letter_date":19},1994,[98,99,100,38,101,13,102,13],"\u003Ctime datetime=\"2023-07-18T13:20:00Z\">07\u002F18\u002F2023\u003C\u002Ftime>\n","\u003Ctime datetime=\"2023-07-05T04:00:00Z\">07\u002F05\u002F2023\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Foutset-medical-inc-656485-07052023\">Outset Medical, Inc.\u003C\u002Fa>","Premarket Approval\u002FAdulterated","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Foutset-medical-inc-656485-02132025\">\u003Ctime datetime=\"2025-02-19T05:00:00Z\">02\u002F19\u002F2025\u003C\u002Ftime>\n\u003C\u002Fa>","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>VIA UNITED PARCEL SERVICE\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Ms. Leslie L. Trigg\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>CEO &amp; Chair\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Outset Medical, Inc.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>3052 Orchard Drive\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>San Jose\u003C\u002Fspan>, \u003Cspan>CA\u003C\u002Fspan> \u003Cspan>95134-2011\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003Cbr>\nCMS# 656485\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>\u003Cbr>\nJuly 5, 2023\u003Cbr>\n\u003Cbr>\nDear Ms. Trigg,\u003C\u002Fp>\n\n\u003Cp>During an inspection of your firm located at 3052 Orchard Drive in San Jose, CA on January 17, 2023, through February 10, 2023, investigators from the United States Food and Drug Administration (FDA) determined that your firm is a medical device manufacturer of the Tablo Hemodialysis System and TabloCart with Prefiltration. Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are instruments, apparatuses, implements, machines, contrivances, implants, in vitro reagents, or other similar or related articles, including any component, part, or accessory, which are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\u003C\u002Fp>\n\n\u003Cp>We received responses from you dated March 3, 2023, concerning our investigators’ observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, that was issued to your firm. We address this response below, in relation to each of the noted violations, and any additional responses will be reviewed as part of your warning letter response.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>Unapproved Device Violations\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>1. The TabloCart with Prefiltration is adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C. § 360(k), and 21 CFR 807.81(a)(3)(i).\u003Cbr>\n\u003Cbr>\nYou have not submitted any premarket notification to the Agency for the TabloCart with Prefiltration. However, the evidence and marketing materials reviewed at the inspection and found on your website [www.outsetmedical.com] on March 15, 2023, indicate that the TabloCart with Prefiltration is a device. For example, your materials state that the TabloCart with Prefiltration is used for “prefiltration”; has “[t]hree customizable filter configurations [to] enable added filtration of carbon and sediment, depending on a facility’s incoming water quality”; and is intended to be used with your Tablo Hemodialysis System.\u003C\u002Fp>\n\n\u003Cp>It appears that the TabloCart with Prefiltration could be classified under 21 CFR 876.5665 (Water purification system for hemodialysis), a Class II device type subject to premarket notification:\u003C\u002Fp>\n\n\u003Cp>“(a) Identification. A water purification system for hemodialysis is a device that is intended for use with a hemodialysis system and that is intended to remove organic and inorganic substances and microbial contaminants from water used to dilute dialysate concentrate to form dialysate. This generic type of device may include a water softener, sediment filter, carbon filter, and water distillation system.”\u003C\u002Fp>\n\n\u003Cp>TabloCart with Prefiltration appears to meet this definition because:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>It is intended to be used with a Hemodialysis System\u003C\u002Fli>\n\t\u003Cli>It is intended to remove organic and inorganic substances from water used to dilute dialysate concentrate to form dialysate\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>The TabloCart with Prefiltration is intended to improve the incoming water quality and lower the pressure specifications for the Tablo Hemodialysis System to include water that exceeds \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Inadequate filtration of lower quality incoming water may result in adverse effects arising from organic and inorganic contaminants that might be found in improperly prepared dialysis fluid. As noted above, your firm is marketing this device without clearance or premarket approval.\u003C\u002Fp>\n\n\u003Cp>For a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the FDA [21 CFR 807.81(b)]. The kind of information that your firm needs to submit in order to obtain approval or clearance for the devices is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\u003C\u002Fp>\n\n\u003Cp>2. The Tablo Hemodialysis System is adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C. § 360(k), and 21 CFR 807.81(a)(3)(i).\u003C\u002Fp>\n\n\u003Cp>You currently have clearance for the Tablo Hemodialysis System under K223248 for the following indications:\u003C\u002Fp>\n\n\u003Cp>“The Tablo Hemodialysis System is indicated for use in patients with acute and\u002For chronic renal failure, with or without ultrafiltration, in an acute or chronic care facility or in the home. Treatments must be administered under a physician’s prescription and observed by a trained individual who is considered competent in the use of the device. Treatment types available include Intermittent Hemodialysis (IHD), Sustained Low Efficiency Dialysis (SLED\u002F SLEDD), Prolonged Intermittent Renal Replacement Therapy (PIRRT), and Isolated Ultrafiltration.”\u003C\u002Fp>\n\n\u003Cp>However, the evidence reviewed at the inspection and marketing materials found on your website [www.outsetmedical.com] on May 11, 2023, show promotion of the Tablo Hemodialysis System for continuous renal replacement therapy (CRRT) treatment. For example, materials on your website state that two large hospitals converted to a program consisting solely of the Tablo Hemodialysis System and state, “This major conversion eliminated the need for several types of dialysis machines for different clinical needs, including intermittent hemodialysis (IHD) in the dialysis unit and continuous renal replacement therapy (CRRT) in critical care.” Other materials on your website state that multiple hospitals who had established CRRT treatment programs “converted those CRRT programs over to Tablo with Extended Therapy” and states, “They also replaced their CRRT machines with Tablo with XT…”\u003C\u002Fp>\n\n\u003Cp>We evaluated the FDA databases and did not find documentation that you have a cleared 510(k) or a premarket notification in-house for an Indications for Use that includes CRRT treatment. In addition, we note that during review of K223248, you confirmed that CRRT is distinct from the cleared indications for use, device specifications, and treatment modalities for the Tablo Hemodialysis System, and that PIRRT transitions to CRRT at \u003Cstrong>(b)(4)\u003C\u002Fstrong> of use\u003Csup>\u003Cem>\u003Cstrong>1\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup>. Patients who require CRRT are typically hospitalized with acute illness resulting in acute kidney injury and possible severe hemodynamic instability, and the devices that provide CRRT treatment have unique features to enable continuous treatment (&gt; 24 hours) for this patient population. Systems that cannot safely and reliably perform CRRT raise serious public health concerns when used for CRRT treatment, because failure of dialysis systems performing CRRT may result in fluid and electrolyte imbalances, inadequate ultrafiltration, infection, and patient harm\u002Fdeath. This change represents a significant modification outside the scope of the K223248 clearance that could significantly affect safety or effectiveness, resulting in a new device such that a separate, additional 510(k) premarket notification must be submitted [see 21 CFR 807.81(a)(3)(i)]. Thus, the sale of the Tablo Hemodialysis System for CRRT is unlawful.\u003C\u002Fp>\n\n\u003Cp>For further explanation on the need for a new 510(k) for labeling changes and claims, the following information is from guidance document, Deciding When to Submit a 510(k) for a Change to an Existing Device\u003Csup>\u003Cem>\u003Cstrong>2\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup>. The guidance states “most labeling changes that affect the substance, meaning, or scope of the indications for use could significantly affect safety or effectiveness and will require submission of a new 510(k).” Your firm’s sale of the Tablo Hemodialysis System for CRRT treatment constitutes a change to the scope of the indications for use and significantly affects the safety or effectiveness of the device. Accordingly, this change requires the submission of a new 510(k).\u003C\u002Fp>\n\n\u003Cp>For a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the FDA [21 CFR 807.81(b)]. The kind of information that your firm needs to submit in order to obtain approval or clearance for the devices is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\u003C\u002Fp>\n\n\u003Cp>Your response dated March 3, 2023, does not address these violations.\u003C\u002Fp>\n\n\u003Cp>Your firm should take prompt action to address any violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\u003C\u002Fp>\n\n\u003Cp>Other federal agencies may take your compliance with the FD&amp;C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\u003C\u002Fp>\n\n\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed.\u003C\u002Fp>\n\n\u003Cp>Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\n\n\u003Cp>Your firm’s response should be sent to: Jessica Mu, Director of Compliance Branch, at oradevices3firmresponse@fda.hhs.gov. \u003Cstrong>Refer to CMS 656485\u003C\u002Fstrong> when replying. If you have any questions about the contents of this letter, please contact: Lauren Priest at Lauren.Priest@fda.hhs.gov.\u003C\u002Fp>\n\n\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\u003C\u002Fp>\n\n\u003Cp>Sincerely,\u003Cbr>\n\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>Courtney H. Lias, Ph.D.\u003Cbr>\nDirector\u003Cbr>\nOHT3: Office of GastroRenal, ObGyn,\u003Cbr>\nGeneral Hospital and Urology Devices\u003Cbr>\nOffice of Product Evaluation and Quality\u003Cbr>\nCenter for Devices and Radiological Health\u003C\u002Fp>\n\n\u003Cp>\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>Shari J. Shambaugh, Program Division Director\u003Cbr>\nOffice of Medical Device and Radiological Health\u003Cbr>\nDivision 3\u003C\u002Fp>\n\n\u003Cp>_____________________\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>1\u003C\u002Fstrong>\u003C\u002Fem> Refer to the final meeting minutes and presentation slides from a March 13, 2023 teleconference with FDA and statements in the 510(k) submission K223248.\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>2\u003C\u002Fstrong>\u003C\u002Fem> https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fdeciding-when-submit-510k-change-existing-device\u003C\u002Fp>\n\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVIA UNITED PARCEL SERVICE\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nMs. Leslie L. Trigg\n\nRecipient Title\n\nCEO & Chair\n\nOutset Medical, Inc.\n\n3052 Orchard Drive\n\nSan Jose, CA 95134-2011\n\nUnited States\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nWARNING LETTER\n\nCMS# 656485\n\nJuly 5, 2023\n\nDear Ms. Trigg,\n\nDuring an inspection of your firm located at 3052 Orchard Drive in San Jose, CA on January 17, 2023, through February 10, 2023, investigators from the United States Food and Drug Administration (FDA) determined that your firm is a medical device manufacturer of the Tablo Hemodialysis System and TabloCart with Prefiltration. Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are instruments, apparatuses, implements, machines, contrivances, implants, in vitro reagents, or other similar or related articles, including any component, part, or accessory, which are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\n\nWe received responses from you dated March 3, 2023, concerning our investigators’ observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, that was issued to your firm. We address this response below, in relation to each of the noted violations, and any additional responses will be reviewed as part of your warning letter response.\n\nUnapproved Device Violations\n\n1. The TabloCart with Prefiltration is adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C. § 360(k), and 21 CFR 807.81(a)(3)(i).\n\nYou have not submitted any premarket notification to the Agency for the TabloCart with Prefiltration. However, the evidence and marketing materials reviewed at the inspection and found on your website [www.outsetmedical.com] on March 15, 2023, indicate that the TabloCart with Prefiltration is a device. For example, your materials state that the TabloCart with Prefiltration is used for “prefiltration”; has “[t]hree customizable filter configurations [to] enable added filtration of carbon and sediment, depending on a facility’s incoming water quality”; and is intended to be used with your Tablo Hemodialysis System.\n\nIt appears that the TabloCart with Prefiltration could be classified under 21 CFR 876.5665 (Water purification system for hemodialysis), a Class II device type subject to premarket notification:\n\n“(a) Identification. A water purification system for hemodialysis is a device that is intended for use with a hemodialysis system and that is intended to remove organic and inorganic substances and microbial contaminants from water used to dilute dialysate concentrate to form dialysate. This generic type of device may include a water softener, sediment filter, carbon filter, and water distillation system.”\n\nTabloCart with Prefiltration appears to meet this definition because:\n\nIt is intended to be used with a Hemodialysis System\n\nIt is intended to remove organic and inorganic substances from water used to dilute dialysate concentrate to form dialysate\n\nThe TabloCart with Prefiltration is intended to improve the incoming water quality and lower the pressure specifications for the Tablo Hemodialysis System to include water that exceeds (b)(4). Inadequate filtration of lower quality incoming water may result in adverse effects arising from organic and inorganic contaminants that might be found in improperly prepared dialysis fluid. As noted above, your firm is marketing this device without clearance or premarket approval.\n\nFor a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the FDA [21 CFR 807.81(b)]. The kind of information that your firm needs to submit in order to obtain approval or clearance for the devices is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\n\n2. The Tablo Hemodialysis System is adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C. § 360(k), and 21 CFR 807.81(a)(3)(i).\n\nYou currently have clearance for the Tablo Hemodialysis System under K223248 for the following indications:\n\n“The Tablo Hemodialysis System is indicated for use in patients with acute and\u002For chronic renal failure, with or without ultrafiltration, in an acute or chronic care facility or in the home. Treatments must be administered under a physician’s prescription and observed by a trained individual who is considered competent in the use of the device. Treatment types available include Intermittent Hemodialysis (IHD), Sustained Low Efficiency Dialysis (SLED\u002F SLEDD), Prolonged Intermittent Renal Replacement Therapy (PIRRT), and Isolated Ultrafiltration.”\n\nHowever, the evidence reviewed at the inspection and marketing materials found on your website [www.outsetmedical.com] on May 11, 2023, show promotion of the Tablo Hemodialysis System for continuous renal replacement therapy (CRRT) treatment. For example, materials on your website state that two large hospitals converted to a program consisting solely of the Tablo Hemodialysis System and state, “This major conversion eliminated the need for several types of dialysis machines for different clinical needs, including intermittent hemodialysis (IHD) in the dialysis unit and continuous renal replacement therapy (CRRT) in critical care.” Other materials on your website state that multiple hospitals who had established CRRT treatment programs “converted those CRRT programs over to Tablo with Extended Therapy” and states, “They also replaced their CRRT machines with Tablo with XT…”\n\nWe evaluated the FDA databases and did not find documentation that you have a cleared 510(k) or a premarket notification in-house for an Indications for Use that includes CRRT treatment. In addition, we note that during review of K223248, you confirmed that CRRT is distinct from the cleared indications for use, device specifications, and treatment modalities for the Tablo Hemodialysis System, and that PIRRT transitions to CRRT at (b)(4) of use1. Patients who require CRRT are typically hospitalized with acute illness resulting in acute kidney injury and possible severe hemodynamic instability, and the devices that provide CRRT treatment have unique features to enable continuous treatment (> 24 hours) for this patient population. Systems that cannot safely and reliably perform CRRT raise serious public health concerns when used for CRRT treatment, because failure of dialysis systems performing CRRT may result in fluid and electrolyte imbalances, inadequate ultrafiltration, infection, and patient harm\u002Fdeath. This change represents a significant modification outside the scope of the K223248 clearance that could significantly affect safety or effectiveness, resulting in a new device such that a separate, additional 510(k) premarket notification must be submitted [see 21 CFR 807.81(a)(3)(i)]. Thus, the sale of the Tablo Hemodialysis System for CRRT is unlawful.\n\nFor further explanation on the need for a new 510(k) for labeling changes and claims, the following information is from guidance document, Deciding When to Submit a 510(k) for a Change to an Existing Device2. The guidance states “most labeling changes that affect the substance, meaning, or scope of the indications for use could significantly affect safety or effectiveness and will require submission of a new 510(k).” Your firm’s sale of the Tablo Hemodialysis System for CRRT treatment constitutes a change to the scope of the indications for use and significantly affects the safety or effectiveness of the device. Accordingly, this change requires the submission of a new 510(k).\n\nFor a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the FDA [21 CFR 807.81(b)]. The kind of information that your firm needs to submit in order to obtain approval or clearance for the devices is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\n\nYour response dated March 3, 2023, does not address these violations.\n\nYour firm should take prompt action to address any violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\n\nOther federal agencies may take your compliance with the FD&C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\n\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed.\n\nYour firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration as part of your response.\n\nYour firm’s response should be sent to: Jessica Mu, Director of Compliance Branch, at oradevices3firmresponse@fda.hhs.gov. Refer to CMS 656485 when replying. If you have any questions about the contents of this letter, please contact: Lauren Priest at Lauren.Priest@fda.hhs.gov.\n\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\n\nSincerely,\n\n\u002FS\u002F\n\nCourtney H. Lias, Ph.D.\n\nDirector\n\nOHT3: Office of GastroRenal, ObGyn,\n\nGeneral Hospital and Urology Devices\n\nOffice of Product Evaluation and Quality\n\nCenter for Devices and Radiological Health\n\n\u002FS\u002F\n\nShari J. Shambaugh, Program Division Director\n\nOffice of Medical Device and Radiological Health\n\nDivision 3\n\n_____________________\n\n1 Refer to the final meeting minutes and presentation slides from a March 13, 2023 teleconference with FDA and statements in the 510(k) submission K223248.\n\n2 https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fdeciding-when-submit-510k-change-existing-device","Outset Medical, Inc.","outset-medical-inc-656485-07052023","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Foutset-medical-inc-656485-07052023","2026-10-26T08:09:39.616686+00:00","2023-07-18","656485","2025-02-19","Ms. Leslie L. Trigg","2026-08-20T00:54:03.812+00:00","VIA UNITED PARCEL SERVICE","2023-07-05",{"id":117,"raw":118,"subject":122,"body_html":123,"body_text":124,"firm_name":125,"letter_id":126,"created_at":127,"fei_number":19,"letter_url":128,"updated_at":129,"action_type":22,"case_status":23,"posted_date":130,"marcs_cms_no":131,"product_type":26,"closeout_date":19,"issuing_office":11,"recipient_name":19,"body_fetched_at":132,"delivery_method":29,"recipient_title":19,"reference_number":19,"action_taken_date":133,"medical_device_id":19,"response_letter_date":19},472,[119,120,121,11,122,13,13,13],"\u003Ctime datetime=\"2025-11-18T05:00:00Z\">11\u002F18\u002F2025\u003C\u002Ftime>\n","\u003Ctime datetime=\"2025-11-13T05:00:00Z\">11\u002F13\u002F2025\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fmedical-mega-717840-11132025\">Medical Mega\u003C\u002Fa>","Nonprescription\u002FOTC","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>Via Email\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Drugs                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\u003C\u002Fdd>\n                    \n            \u003Cdd>Medical Mega\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>208 Fairmont Ave\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Jersey City\u003C\u002Fspan>, \u003Cspan>NJ\u003C\u002Fspan> \u003Cspan>07306\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:Sales@medicalmega.com\"> Sales@medicalmega.com  \u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Drug Evaluation and Research (CDER)\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>November 13, 2025\u003C\u002Fp>\u003Cp>RE: 717840\u003C\u002Fp>\u003Cp>Medical Mega:\u003C\u002Fp>\u003Cp>This letter is to advise you that the United States Food and Drug Administration (FDA) reviewed your website at the internet address https:\u002F\u002Fwww.medicalmega.com. The FDA has observed that your website offers the following triclosan-containing consumer and health care antiseptic nonprescription drug products: “Ameriderm AmeriWash Antimicrobial Lotion Soap with Triclosan 800 mL,” “Ameriderm AmeriWash Antimicrobial Lotion Soap with Triclosan 1 Gallon,” and “Ameriderm AmeriWash Antimicrobial Lotion Soap with Triclosan 1000 mL” (hereinafter “Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan”) for sale in United States. Based on our review, these products are unapproved new drugs introduced or delivered for introduction into interstate commerce in violation of sections 505(a) and 301(d) of the Federal Food, Drug, and Cosmetic Act (FD&amp;C Act), 21 U.S.C. 355(a) and 331(d). In addition, these products are misbranded under section 502(ee) of the FD&amp;C Act, 21 U.S.C. 352(ee). Introduction or delivery for introduction of misbranded products into interstate commerce is prohibited under sections 301 (d) and (a) of the FD&amp;C Act, 21 U.S.C. 331(d) and (a). These violations are described in more detail below.\u003C\u002Fp>\u003Cp>\u003Cstrong>Unapproved New Drug and Misbranded Drug Violations\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>“Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan” are “drugs” as defined by section 201(g)(1)(B) of the FD&amp;C Act, 21 U.S.C. 321(g)(1)(B), because they are intended for use in the diagnosis, cure, mitigation, treatment, or prevention of disease, and\u002For under section 201(g)(1)(C) of the FD&amp;C Act, 21 U.S.C. 321(g)(1)(C), because they are intended to affect the structure or any function of the body.\u003C\u002Fp>\u003Cp>Examples from the “Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan” product labeling, including your website, https:\u002F\u002Fwww.medicalmega.com, that provide evidence of the intended use (as defined in 21 CFR 201.128) of the products as drugs include, but may not be limited to, the following:\u003C\u002Fp>\u003Cp>\u003Cu>“Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan”\u003C\u002Fu>\u003C\u002Fp>\u003Cp>“Anti-microbial…Kills bacteria on contact…” [from your https:\u002F\u002Fmedicalmega.com\u002FAmeriWash-Antimicrobial-Lotion-Soap-with-Triclosan-1000-mL product page]\u003C\u002Fp>\u003Cp>Based on the above labeling evidence, the “Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan” are intended for use as triclosan-containing consumer and health care antiseptic nonprescription drug products. As described below, these drug products are unapproved new drugs marketed in violation of sections 505(a) and 301(d) of the FD&amp;C Act, 21 U.S.C. 355(a) and 331(d).\u003C\u002Fp>\u003Cp>A drug product is a “new drug” within the meaning of section 201(p) of the FD&amp;C Act, 21 U.S.C. 321(p), if it is not generally recognized as safe and effective (GRASE) for use under the conditions prescribed, recommended, or suggested in its labeling; and in general, a new drug may not be introduced or delivered for introduction into interstate commerce without an approved application from FDA in effect, as described in section 505(a) of the FD&amp;C Act, 21 U.S.C. 355(a). No FDA-approved applications pursuant to section 505 of the FD&amp;C Act, 21 U.S.C. 355, are in effect for the drug products identified above.\u003C\u002Fp>\u003Cp>With respect to triclosan-containing consumer and health care antiseptic nonprescription drug products, such as the “Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan,” such products are subject to section 505G of the FD&amp;C Act, 21 U.S.C. 355h, which governs nonprescription drugs marketed without an approved application. Specifically, these products fall under section 505G(a)(5) of the FD&amp;C Act, 21 U.S.C. 355h(a)(5), because FDA has determined that topical consumer and health care antiseptic nonprescription drug products formulated with triclosan as an active ingredient are not GRASE under a final determination issued under 21 CFR part 330.1\u003C\u002Fp>\u003Cp>Therefore, these products are new drugs within the meaning of section 201(p) of the FD&amp;C Act, 21 U.S.C. 321(p). No FDA-approved application pursuant to section 505 of the FD&amp;C Act is in effect for these drug products. Accordingly, these products are unapproved new drugs marketed in violation of section 505(a) of the FD&amp;C Act, 21 U.S.C. 355(a). Introduction or delivery for introduction of such products into interstate commerce is prohibited under section 301(d) of the FD&amp;C Act, 21 U.S.C. 331(d).\u003C\u002Fp>\u003Cp>In addition, the “Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan” are misbranded under section 502(ee) of the FD&amp;C Act, 21 U.S.C. 352(ee), because these products are nonprescription drugs subject to section 505G of the FD&amp;C Act, 21 U.S.C. 355h, but do not comply with the requirements for marketing under that section and are not the subject of an application approved under section 505 of the FD&amp;C Act, 21 U.S.C. 355.\u003C\u002Fp>\u003Cp>The introduction or delivery for introduction of a misbranded drug into interstate commerce violates section 301(a) of the FD&amp;C Act, 21 U.S.C. 331(a).\u003C\u002Fp>\u003Cp>\u003Cstrong>Conclusion\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>The violations cited in this letter are not intended to be an all-inclusive list of violations that may exist in connection with your products. You are responsible for investigating and determining the causes of any violations and for preventing their recurrence or the occurrence of other violations. It is your responsibility to ensure that your firm complies with all requirements of federal law, including FDA regulations.\u003C\u002Fp>\u003Cp>This letter notifies you of our concerns and provides you an opportunity to address them. Failure to adequately address this matter may result in legal action including, without limitation, seizure and injunction.\u003C\u002Fp>\u003Cp>Please notify FDA in writing, within 15 working days of receipt of this letter, of the specific steps you have taken to correct any violations. Include an explanation of each step being taken to prevent the recurrence of violations, as well as copies of related documentation. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration. If you cannot complete corrective action within 15 working days, state the reason for the delay and the time within which you will complete the correction.\u003C\u002Fp>\u003Cp>Your response should be sent to U.S. Food and Drug Administration, CDER\u002FOC\u002FOffice of Unapproved Drugs and Labeling Compliance by email to FDAAdvisory@fda.hhs.gov, please include your firm name and the unique identifier “717840” in the subject line of the email.\u003C\u002Fp>\u003Cp>Sincerely,\u003Cbr>\u002FS\u002F\u003C\u002Fp>\u003Cp>Tina Smith, M.S.\u003Cbr>Captain, U.S. Public Health Service\u003Cbr>Director\u003Cbr>Office of Unapproved Drugs and Labeling Compliance\u003Cbr>Office of Compliance\u003Cbr>Center for Drug Evaluation and Research\u003Cbr>U.S. Food and Drug Administration\u003C\u002Fp>\u003Cp>_________________\u003C\u002Fp>\u003Cp>\u003Cem>\u003Cstrong>1\u003C\u002Fstrong>\u003C\u002Fem> On September 6, 2017, FDA issued a final rule establishing that certain ingredients for OTC topical consumer antiseptic wash nonprescription drug products, including triclosan, are not generally recognized as safe and effective (81 FR 61106). FDA’s final determination was codified in regulations at 21 CFR 310.545(a)(27)(iii). On December 20, 2018, FDA issued a final rule establishing that certain ingredients for OTC health care antiseptic hand wash nonprescription drug products, including triclosan, are not generally recognized as safe and effective (82 FR 60474). FDA’s final determination was codified in regulations at 21 CFR 310.545(a)(27)(vi). Under section 505G(k)(2)(A) of the FD&amp;C Act, the non-monograph conditions in 21 CFR 310.545 in effect on the day before the date of enactment of the CARES Act (i.e., March 26, 2020) were deemed to be a final administrative order. The final administrative order is entitled “Non-Monograph Conditions NM900: Drug Products Containing Certain Active Ingredients Offered Over-the-Counter for Certain Uses” (See Order ID OTC 000007, available at OTC Monographs@FDA, https:\u002F\u002Fwww.accessdata.fda.gov\u002Fscripts\u002Fcder\u002Fomuf\u002F).\u003C\u002Fp>\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVia Email\n\nProduct:\n\nDrugs\n\nRecipient:\n\nMedical Mega\n\n208 Fairmont Ave\n\nJersey City, NJ 07306\n\nUnited States\n\nSales@medicalmega.com\n\nIssuing Office:\n\nCenter for Drug Evaluation and Research (CDER)\n\nUnited States\n\nWARNING LETTER\nNovember 13, 2025\nRE: 717840\nMedical Mega:\nThis letter is to advise you that the United States Food and Drug Administration (FDA) reviewed your website at the internet address https:\u002F\u002Fwww.medicalmega.com. The FDA has observed that your website offers the following triclosan-containing consumer and health care antiseptic nonprescription drug products: “Ameriderm AmeriWash Antimicrobial Lotion Soap with Triclosan 800 mL,” “Ameriderm AmeriWash Antimicrobial Lotion Soap with Triclosan 1 Gallon,” and “Ameriderm AmeriWash Antimicrobial Lotion Soap with Triclosan 1000 mL” (hereinafter “Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan”) for sale in United States. Based on our review, these products are unapproved new drugs introduced or delivered for introduction into interstate commerce in violation of sections 505(a) and 301(d) of the Federal Food, Drug, and Cosmetic Act (FD&C Act), 21 U.S.C. 355(a) and 331(d). In addition, these products are misbranded under section 502(ee) of the FD&C Act, 21 U.S.C. 352(ee). Introduction or delivery for introduction of misbranded products into interstate commerce is prohibited under sections 301 (d) and (a) of the FD&C Act, 21 U.S.C. 331(d) and (a). These violations are described in more detail below.\nUnapproved New Drug and Misbranded Drug Violations\n“Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan” are “drugs” as defined by section 201(g)(1)(B) of the FD&C Act, 21 U.S.C. 321(g)(1)(B), because they are intended for use in the diagnosis, cure, mitigation, treatment, or prevention of disease, and\u002For under section 201(g)(1)(C) of the FD&C Act, 21 U.S.C. 321(g)(1)(C), because they are intended to affect the structure or any function of the body.\nExamples from the “Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan” product labeling, including your website, https:\u002F\u002Fwww.medicalmega.com, that provide evidence of the intended use (as defined in 21 CFR 201.128) of the products as drugs include, but may not be limited to, the following:\n“Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan”\n“Anti-microbial…Kills bacteria on contact…” [from your https:\u002F\u002Fmedicalmega.com\u002FAmeriWash-Antimicrobial-Lotion-Soap-with-Triclosan-1000-mL product page]\nBased on the above labeling evidence, the “Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan” are intended for use as triclosan-containing consumer and health care antiseptic nonprescription drug products. As described below, these drug products are unapproved new drugs marketed in violation of sections 505(a) and 301(d) of the FD&C Act, 21 U.S.C. 355(a) and 331(d).\nA drug product is a “new drug” within the meaning of section 201(p) of the FD&C Act, 21 U.S.C. 321(p), if it is not generally recognized as safe and effective (GRASE) for use under the conditions prescribed, recommended, or suggested in its labeling; and in general, a new drug may not be introduced or delivered for introduction into interstate commerce without an approved application from FDA in effect, as described in section 505(a) of the FD&C Act, 21 U.S.C. 355(a). No FDA-approved applications pursuant to section 505 of the FD&C Act, 21 U.S.C. 355, are in effect for the drug products identified above.\nWith respect to triclosan-containing consumer and health care antiseptic nonprescription drug products, such as the “Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan,” such products are subject to section 505G of the FD&C Act, 21 U.S.C. 355h, which governs nonprescription drugs marketed without an approved application. Specifically, these products fall under section 505G(a)(5) of the FD&C Act, 21 U.S.C. 355h(a)(5), because FDA has determined that topical consumer and health care antiseptic nonprescription drug products formulated with triclosan as an active ingredient are not GRASE under a final determination issued under 21 CFR part 330.1\nTherefore, these products are new drugs within the meaning of section 201(p) of the FD&C Act, 21 U.S.C. 321(p). No FDA-approved application pursuant to section 505 of the FD&C Act is in effect for these drug products. Accordingly, these products are unapproved new drugs marketed in violation of section 505(a) of the FD&C Act, 21 U.S.C. 355(a). Introduction or delivery for introduction of such products into interstate commerce is prohibited under section 301(d) of the FD&C Act, 21 U.S.C. 331(d).\nIn addition, the “Ameriderm AmeriWash Antimicrobial Lotion Soaps with Triclosan” are misbranded under section 502(ee) of the FD&C Act, 21 U.S.C. 352(ee), because these products are nonprescription drugs subject to section 505G of the FD&C Act, 21 U.S.C. 355h, but do not comply with the requirements for marketing under that section and are not the subject of an application approved under section 505 of the FD&C Act, 21 U.S.C. 355.\nThe introduction or delivery for introduction of a misbranded drug into interstate commerce violates section 301(a) of the FD&C Act, 21 U.S.C. 331(a).\nConclusion\nThe violations cited in this letter are not intended to be an all-inclusive list of violations that may exist in connection with your products. You are responsible for investigating and determining the causes of any violations and for preventing their recurrence or the occurrence of other violations. It is your responsibility to ensure that your firm complies with all requirements of federal law, including FDA regulations.\nThis letter notifies you of our concerns and provides you an opportunity to address them. Failure to adequately address this matter may result in legal action including, without limitation, seizure and injunction.\nPlease notify FDA in writing, within 15 working days of receipt of this letter, of the specific steps you have taken to correct any violations. Include an explanation of each step being taken to prevent the recurrence of violations, as well as copies of related documentation. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration. If you cannot complete corrective action within 15 working days, state the reason for the delay and the time within which you will complete the correction.\nYour response should be sent to U.S. Food and Drug Administration, CDER\u002FOC\u002FOffice of Unapproved Drugs and Labeling Compliance by email to FDAAdvisory@fda.hhs.gov, please include your firm name and the unique identifier “717840” in the subject line of the email.\nSincerely,\n\u002FS\u002F\nTina Smith, M.S.\nCaptain, U.S. Public Health Service\nDirector\nOffice of Unapproved Drugs and Labeling Compliance\nOffice of Compliance\nCenter for Drug Evaluation and Research\nU.S. Food and Drug Administration\n_________________\n1 On September 6, 2017, FDA issued a final rule establishing that certain ingredients for OTC topical consumer antiseptic wash nonprescription drug products, including triclosan, are not generally recognized as safe and effective (81 FR 61106). FDA’s final determination was codified in regulations at 21 CFR 310.545(a)(27)(iii). On December 20, 2018, FDA issued a final rule establishing that certain ingredients for OTC health care antiseptic hand wash nonprescription drug products, including triclosan, are not generally recognized as safe and effective (82 FR 60474). FDA’s final determination was codified in regulations at 21 CFR 310.545(a)(27)(vi). Under section 505G(k)(2)(A) of the FD&C Act, the non-monograph conditions in 21 CFR 310.545 in effect on the day before the date of enactment of the CARES Act (i.e., March 26, 2020) were deemed to be a final administrative order. The final administrative order is entitled “Non-Monograph Conditions NM900: Drug Products Containing Certain Active Ingredients Offered Over-the-Counter for Certain Uses” (See Order ID OTC 000007, available at OTC Monographs@FDA, https:\u002F\u002Fwww.accessdata.fda.gov\u002Fscripts\u002Fcder\u002Fomuf\u002F).","Medical Mega","medical-mega-717840-11132025","2026-08-18T06:42:28.498414+00:00","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fmedical-mega-717840-11132025","2026-10-26T08:09:22.956521+00:00","2025-11-18","717840","2026-08-19T14:27:25.954+00:00","2025-11-13",{"id":135,"raw":136,"subject":60,"body_html":140,"body_text":141,"firm_name":142,"letter_id":143,"created_at":127,"fei_number":19,"letter_url":144,"updated_at":145,"action_type":22,"case_status":23,"posted_date":146,"marcs_cms_no":147,"product_type":50,"closeout_date":19,"issuing_office":38,"recipient_name":148,"body_fetched_at":149,"delivery_method":93,"recipient_title":19,"reference_number":19,"action_taken_date":150,"medical_device_id":19,"response_letter_date":19},266,[137,138,139,38,60,13,13,13],"\u003Ctime datetime=\"2026-03-17T04:00:00Z\">03\u002F17\u002F2026\u003C\u002Ftime>\n","\u003Ctime datetime=\"2025-09-03T04:00:00Z\">09\u002F03\u002F2025\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Favertix-medical-inc-711080-09032025\">Avertix Medical, Inc.\u003C\u002Fa>","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>VIA Electronic Mail\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Timothy P. Moran\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>President and CEO\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Avertix Medical, Inc.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>40 Christopher Way, Ste 201\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Eatontown\u003C\u002Fspan>, \u003Cspan>NJ\u003C\u002Fspan> \u003Cspan>07724\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:tmoran@avertix.com\"> tmoran@avertix.com \u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003Cbr>\u003Cstrong>CMS # 711080\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>September 3, 2025\u003C\u002Fp>\u003Cp>Dear Mr. Moran:\u003C\u002Fp>\u003Cp>During an inspection of your firm located in Eatontown, NJ from February 19, 2025, through March 11, 2025, an investigator from the United States Food and Drug Administration (FDA) determined that your firm manufactures The Guardian System, an implantable coronary syndrome event detector. The Guardian System consists of three main system components: an implantable device used to monitor a patient’s electrogram (IMD); a hand-held telemetry device that provides alarms and alerts and interfaces between the IMD and programmer (EXD); and a programmer utilized by healthcare professionals to program the IMD and alarm\u002Falert settings and retrieve and review IMD data (Programmer). Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\u003C\u002Fp>\u003Cp>\u003Cstrong>\u003Cu>Quality System Regulation Violations\u003C\u002Fu>\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>This inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, \u003Cu>Code of Federal Regulations\u003C\u002Fu> (CFR), Part 820. We received responses from David Keenan, Chief Technology Officer, dated March 31, 2025, and June 20, 2025, concerning our investigator’s observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, that was issued to your firm. We address these responses below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\u003C\u002Fp>\u003Cp>1. Failure to maintain complaint files; and failure to adequately establish and maintain procedures for receiving, reviewing, and evaluating complaints by a formally designated unit as required by 21 CFR 820.198(a). Specifically, the firm’s procedure, Complaint Procedure, #1716-002, Rev Q (dated February 25, 2022) to Rev R (dated April 11, 2022) has not been adequately established in that:\u003C\u002Fp>\u003Cp>a. Your firm failed to adequately maintain complaint files, as required by 21 CFR 820.198(a).&nbsp;\u003C\u002Fp>\u003Cp>Specifically, section 5.1.2 of your complaint procedure requires all employees to report any product complaint or feedback from the field. Section 5.1.3 of the complaint procedure covers the review of “ISSUES” to disposition them as a “COMPLAINT” or “REJCT\u002FNo ACTION REQUIRED”. The FDA investigator identified 11 issues which meet the definition of a complaint and were not dispositioned as a complaint as required by your procedure. For example:\u003C\u002Fp>\u003Cp>i. \u003Cstrong>(b)(4)\u003C\u002Fstrong>, reported on November 6, 2023, listing the patient effect description as “Guardian Device was removed from the patient due to a recurrent pocket infection post implant.”\u003C\u002Fp>\u003Cp>ii. \u003Cstrong>(b)(4)\u003C\u002Fstrong>, reported on March 4, 2022, listed the programmer battery connector broke when trying to remove the battery.\u003C\u002Fp>\u003Cp>iii. \u003Cstrong>(b)(4)\u003C\u002Fstrong>, reported on September 6, 2023, listed the USB Drive for Programmer was not connected and required formatting each time to use.\u003C\u002Fp>\u003Cp>Additionally, six of eleven “nonconforming material reports” (NCMRs) reviewed during the inspection that met the definition of complaints were not considered complaints and as such were handled according to your nonconforming material process. For example:\u003C\u002Fp>\u003Cp>iv. \u003Cstrong>(b)(4)\u003C\u002Fstrong>, created April 30, 2024, states that a Programmer (PROG-003) was returned from the field due to issues with the battery charging indicator light.\u003C\u002Fp>\u003Cp>v. \u003Cstrong>(b)(4)\u003C\u002Fstrong>, created September 6, 2023, states a USB flash drive was not functioning properly in the field and was returned.\u003C\u002Fp>\u003Cp>vi. \u003Cstrong>(b)(4)\u003C\u002Fstrong>, created November 22, 2022, states that a field clinical engineer reported that a Programmer Battery was damaged while being inserted into the Programmer.\u003C\u002Fp>\u003Cp>The above “issues” and “nonconforming product reports” were not evaluated for MDR reportability and were not reviewed to determine if an investigation is necessary, since they were not considered complaints.\u003C\u002Fp>\u003Cp>b. Your firm failed to adequately establish and maintain procedures to ensure that all complaints are processed in a uniform and timely manner, as required by 21 CFR 820.198(a)(1).\u003C\u002Fp>\u003Cp>Specifically, your firm’s \u003Cem>Complaint Procedure\u003C\u002Fem>, #1716-002, does not include a requirement for timely and uniform complaint handling. For example, the following complaints were entered as issues and were not escalated to complaints in a timely manner:\u003C\u002Fp>\u003Cp>i. Complaint-00077: On July 17, 2024, your firm became aware of a reported issue where the physician was unable to retrieve data from the IMD implant. The complaint record was not opened until September 5, 2024 (50 days after becoming aware).\u003C\u002Fp>\u003Cp>ii. Complaint-00066: On February 13, 2024, your firm became aware of an IMD explant due to an infection. The complaint record was not opened until March 28, 2024 (44 days after becoming aware).\u003C\u002Fp>\u003Cp>iii. Complaint-00059: On November 30, 2023, your firm became aware of a reported “flat line IMD” event. The complaint record was not opened until January 5, 2024 (36 days after becoming aware).\u003C\u002Fp>\u003Cp>iv. Complaint-00039: On October 28, 2022, your firm became aware of an IMD explant due to an infection. The complaint record was not opened until December 1, 2022 (34 days after becoming aware).\u003C\u002Fp>\u003Cp>c. Your firm failed to review, evaluate, and investigate any complaint involving the possible failure of a device, labeling, or packaging to meet any of its specifications, unless such investigation has already been performed for a similar complaint and another investigation is not necessary, as required by 21 CFR 820 820.198(c).\u003C\u002Fp>\u003Cp>Specifically, Section 5.1.4 of your \u003Cem>Complaint Procedure\u003C\u002Fem> requires investigation of complaints. Your firm failed to adequately review, evaluate, and investigate the following complaints that reported patient infection and subsequent explant of the implantable cardiac monitoring device (IMD), the implantable portion of The Guardian System:\u003C\u002Fp>\u003Cp>i. \u003Cstrong>(b)(4)\u003C\u002Fstrong>, reported on February 13, 2024, that subsequently became Complaint-00066, documents the justification for not performing an investigation as: “\u003Cem>Physician determined patient had a pocket infection and made the decision to explant and device. No investigation needed\u003C\u002Fem>.”\u003C\u002Fp>\u003Cp>ii. \u003Cstrong>(b)(4)\u003C\u002Fstrong>, reported on October 28, 2022, that subsequently became Complaint-00039, documents the “Initiate Investigation Process” option was selected but no investigation was performed and the “\u003Cem>Review for Closure\u003C\u002Fem>” section of the complaint records lists “\u003Cem>no investigation needed\u003C\u002Fem>.”\u003C\u002Fp>\u003Cp>We reviewed your firm’s responses and conclude that they are not adequate. In the response, your firm states that CAPA 00015 was opened to capture all corrective and preventive work performed in relation to this observation. As part of CAPA 00015, your firm promised to \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm also promised to \u003Cstrong>(b)(4)\u003C\u002Fstrong>. However, the response does not address performing a retrospective review of all issues and nonconforming product reports to determine if other complaints exist and if investigations need to be performed. Several of the items promised by your firm continue to be in-progress (including but not limited to \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fp>\u003Cp>2. Failure to adequately establish and maintain procedures to control product that does not conform to specified requirements. The procedures shall address the identification, documentation, evaluation, segregation, and disposition of nonconforming product. The evaluation of nonconformance shall include a determination of the need for an investigation and notification of the persons or organizations responsible for the nonconformance. The evaluation and any investigation shall be documented, as required by 21 CFR 820.90(a).\u003C\u002Fp>\u003Cp>Specifically, your \u003Cem>Nonconformance Material Procedure\u003C\u002Fem>, #1707-002, does not include a provision for the determination of the need for an investigation. For example, the following two nonconformances did not include a documented investigation or evaluation:\u003C\u002Fp>\u003Cp>a. \u003Cstrong>(b)(4)\u003C\u002Fstrong> was created on June 27, 2024, for IMD batteries that were sent to your contract manufacturer for use in production were returned due to nonconformances (bent prongs). The disposition of the batteries was recorded as being scrapped. However, there was no investigation conducted into the cause of the bent probes and the nonconformance record does not include a rationale for not investigating.\u003C\u002Fp>\u003Cp>b. \u003Cstrong>(b)(4)\u003C\u002Fstrong> was created on June 7, 2023, for the EXD-001 Battery Packaging Label (p\u002Fn \u003Cstrong>(b)(4)\u003C\u002Fstrong>) on the EXD-001 Battery, 10 Packs (p\u002Fn \u003Cstrong>(b)(4)\u003C\u002Fstrong>) listing an incorrect expiration date and battery lot code in finished goods inventory. Your firm reworked the nonconforming product. However, there was no investigation conducted into the cause of the incorrect labeling and the nonconformance record does not include a rationale for not investigating.\u003C\u002Fp>\u003Cp>We reviewed your firm’s responses and conclude that they are not adequate. Your response promises to \u003Cstrong>(b)(4)\u003C\u002Fstrong> as well as plans to \u003Cstrong>(b)(4)\u003C\u002Fstrong>. All activities are captured in CAPA 00017 and all work is promised by \u003Cstrong>(b)(4)\u003C\u002Fstrong>. However, your response fails to address if a retrospective review of NCMRs will be conducted. Several of these promised actions (including CAPA 00017) remain in-progress with a tentative CAPA Effectiveness Verification planned due date of \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fp>\u003Cp>3. Failure to adequately establish and maintain procedures for validating the device design to include adequate risk analysis, as required by 21 CFR 820.30(g). Specifically, section 6.14 of your \u003Cem>Risk Management Procedure\u003C\u002Fem>, #1701-011, covers the information collection, information review, and actions related to the use of the Corrective and Preventive Action System and the Complaint System to monitor the device in the clinical and post-production phase to determine if reassessment of risks and\u002For assessment of new risks is necessary. Your firm failed to reassess the risk when estimated risks from a hazard differed from the actual risk observed in post-market CAPA and complaint data. For example:\u003C\u002Fp>\u003Cp>a. Your firm has received three complaints of infection with the IMD portion of the Guardian System out of a total of \u003Cstrong>(b)(4)\u003C\u002Fstrong> IMDs implanted as of February 25, 2025. The observed rate of infection is \u003Cstrong>(b)(4)\u003C\u002Fstrong>%. In your device risk file, \u003Cem>Guardian System Risk Assessment\u003C\u002Fem> – P18, #0201-0200-001#P18, Rev B, dated November 13, 2023, the rate of infection was estimated to be \u003Cstrong>(b)(4)\u003C\u002Fstrong>%. The risk was not reassessed.\u003C\u002Fp>\u003Cp>b. Your firm has received 24 complaints of battery failure due to electrical short before the device reached its expected service life of 6 years, causing patients to opt for early explant and\u002For replacement. The observed rate of battery failure is \u003Cstrong>(b)(4)\u003C\u002Fstrong>%. In your device risk file, \u003Cem>IMD AMSG3-E Hardware FMECA Report – P16\u003C\u002Fem>, #0212-0201-001#P16, Rev A; dated February 24, 2015, the rate of battery failure was estimated to be \u003Cstrong>(b)(4)\u003C\u002Fstrong>%. Further, your firm initiated CAPA-00012 in response to the battery failures. The “Process Impacts” section of this CAPA indicates that no updates to risk management were needed. The risk was not reassessed.\u003C\u002Fp>\u003Cp>We reviewed your firm’s responses and conclude that they are not adequate. In the response, your firm indicates that CAPA 00016 was opened to address any corrective and preventive work taken as result of the observation including to assess the risk associated with infection using current performance data against historical data and to address the need to perform risk reviews on a regularly scheduled basis to keep the risk data current by July 1, 2025. However, your firm did not indicate if you intend to review, and update as necessary, the risk file utilizing post-market data for items other than risk of infection. Several of the items promised by your firm continue to be in-progress, including but not limited to \u003Cstrong>(b)(4)\u003C\u002Fstrong> which has a \u003Cstrong>(b)(4)\u003C\u002Fstrong> planned due date of \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fp>\u003Cp>4. Failure to adequately establish and maintain procedures for implementing corrective and preventive action, as required by 21 CFR 820.100(a). Specifically, your firm failed to follow your procedure, Corrective and Preventive Action Procedure, #1708-001, Rev J, dated October 23, 2020, when taking corrective and preventive actions. Two examples of lack of CAPA procedure implementation are as follows:\u003C\u002Fp>\u003Cp>a. Your firm failed to follow your CAPA process for a corrective action taken as a result of a consumer complaint which led to a revision made to manufacturing procedure Process Specification, PROG-004 Final Shipping Manufacturing, #0217-1200-020#P18, Rev F, dated November 19, 2024. These actions were taken outside of the CAPA system and lack a documented CAPA investigation as well as verification of implementation and effectiveness.\u003C\u002Fp>\u003Cp>b. Your firm failed to verify or validate the corrective and preventive action to ensure that such action is effective and does not adversely affect the finished device, as required by 21 CFR 820.100(a)(4). Specifically, section 5.9 of the Corrective and Preventive Action Procedure, #1708-001, Rev J, dated October 23, 2020, describes your firm’s process for establishing verification of effectiveness plans with predetermined criteria that verify if corrective and\u002For preventive actions were effective. Additionally, section 5.10 of the Corrective and Preventive Action Procedure, #1708-001, Rev J, dated October 23, 2020, describes the process for conducting the verification of effectiveness (VOE) phase to demonstrate effectiveness.\u003C\u002Fp>\u003Cp>Review of five CAPAs closed between January 2022 and the time of the current inspection disclosed that four CAPAs (CAPA-00007, CAPA-00008, CAPA-00010, and CAPA-00014) lacked evidence that your firm verified or validated that the action taken was effective.\u003C\u002Fp>\u003Cp>For example, CAPA-00007, was opened as a result of the previous inspection on March 15, 2022, related to a complaint involving EXD batteries having expired shelf life. Your firm implemented several corrective actions to correct the issue which were documented utilizing the complaint record (complaint number 00013) instead of through the CAPA system. CAPA-00007 was closed on March 31, 2022, without verifying the effectiveness of the correction and preventive actions taken.\u003C\u002Fp>\u003Cp>We reviewed your firm’s responses and conclude that they are not adequate. In this response, your firm opened CAPA 00016 to document actions taken for this observation. Your firm promises to \u003Cstrong>(b)(4)\u003C\u002Fstrong>. For the 5 CAPAs lacking VOE plans and reports, your firm asks our Agency if \u003Cstrong>(b)(4)\u003C\u002Fstrong> (2021 or earlier). The decision to \u003Cstrong>(b)(4)\u003C\u002Fstrong> remains your firm’s decision as long as it is based on a rationale you determine to be appropriate given the 21 CFR 820.100(a)(4) and your own procedural requirement to demonstrate effectiveness of a CAPA action. You are also going to \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your response does not address if other CAPAs will be reviewed to determine if \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Several of the items promised by your firm continue to be in-progress (including but not limited to \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fp>\u003Cp>5. Failure to validate with a high degree of assurance and approve according to established procedures, a process whose results cannot be fully verified by subsequent inspection and test, as required by 21 CFR 820.75(a). Specifically, your firm’s Process Validation Procedure, #1705-002, Rev E, dated October 23, 2020, and Process Qualification Procedure, #1705-001, Rev F, dated October 23, 2020, were not adequately established in that both procedures fail to address sterilization validation. Your firm’s implantable cardiac monitoring device (IMD) undergoes \u003Cstrong>(b)(4)\u003C\u002Fstrong> sterilization. Further, the two procedures fail to document the process of requalification and revalidation (if necessary) of the sterilization cycle.\u003C\u002Fp>\u003Cp>For example, the \u003Cstrong>(b)(4)\u003C\u002Fstrong> sterilization process for your firm’s IMD was last performed in June 2022 by a 3rd party in accordance with FDA-recognized standard ANSI\u002FAAMI\u002FISO 11135:2014. Your firm has not reviewed the \u003Cstrong>(b)(4)\u003C\u002Fstrong> sterilization process since the 2022 requalification.\u003C\u002Fp>\u003Cp>We reviewed your firm’s responses and conclude that they are not adequate. In the responses, you indicate that CAPA 00019 was opened as a result of the observation and that your firm promises to \u003Cstrong>(b)(4)\u003C\u002Fstrong>. However, your responses do not address if your firm’s plans to revise your process validation procedures to include sterilization. Additionally, supporting evidence (including CAPA 00019) of these promised actions remain in progress with a CAPA Effectiveness Verification planned due date for CAPA 00019 of \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fp>\u003Cp>6. Failure to adequately establish and maintain the requirements, including quality requirements, that must be met by suppliers, contractors, and consultants, as required by 21 CFR 820.50(a). Specifically, your \u003Cem>Supplier Management Procedure\u003C\u002Fem> (#1703-003), has not been fully implemented. For example:\u003C\u002Fp>\u003Cp>a. Your firm’s \u003Cem>Supplier Management Procedure\u003C\u002Fem> (#1703-003) describes a process for supplier evaluation and acceptance using a supplier evaluation form. The Supplier Evaluation Form for the IMD battery supplier, (dated February 13, 2020), indicated your firm’s contract manufacturer would perform receiving inspections of these batteries and provide \u003Cstrong>(b)(4)\u003C\u002Fstrong> to Avertix. Your QA\u002FQC manager stated these \u003Cstrong>(b)(4)\u003C\u002Fstrong> were not completed.\u003C\u002Fp>\u003Cp>b. Your firm failed to adequately establish and maintain records of acceptable suppliers, contractors, and consultants, as required by 21 CFR 820.50(a)(3). Specifically, section 7.1.12 of Supplier Management Procedure, Rev K, states that “Quality Assurance is responsible for revising the Approved Supplier List with changes made based on acceptance\u002Frejection of potential suppliers\u002Fre-evaluated suppliers\u002Fdeactivated suppliers…” A software supplier used by your firm since 2023 to meet the requirements of the Medical Device Tracking regulation was not listed on your Approved Supplier List (Rev L, dated June 15, 2023).\u003C\u002Fp>\u003Cp>We reviewed your firm’s responses and conclude that they are not adequate. In the responses, your firm promises and provided revisions to your Supplier Management Procedure (Document 1703-003) removing the requirement for \u003Cstrong>(b)(4)\u003C\u002Fstrong> for your contract manufacturer and to evidence of a new supplier evaluation for the software supplier utilized for medical device tracking by July 1, 2025. The responses do not indicate if other supplier evaluations will be evaluated and updated, as needed. Further, CAPA 00023 remains in progress with a CAPA Effectiveness Verification planned due date of December 1, 2025.\u003C\u002Fp>\u003Cp>\u003Cstrong>\u003Cu>Medical Device Reporting (MDR) Violations\u003C\u002Fu>\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Our inspection also revealed that your firm’s Guardian System devices are misbranded under section 502(t)(2) of the Act, 21 U.S.C. § 352(t)(2), in that your firm failed or refused to furnish material or information respecting the device that is required by or under section 519 of the Act, 21 U.S.C. § 360i. 21 CFR Part 803 - Medical Device Reporting was promulgated under section 519 of the Act, among other provisions. Significant violations include, but are not limited to, the following:\u003C\u002Fp>\u003Cp>1. Failure to report to the FDA the information required by 21 CFR 803.52 in accordance with the requirements of 21 CFR 803.12(a), no later than 30 calendar days after the day that your firm received or otherwise became aware of information, from any source, that reasonably suggests that a device that it markets may have caused or contributed to a death or serious injury, as required by 21 CFR 803.50(a)(1).\u003C\u002Fp>\u003Cp>For example, the information included for Complaint-00066, Issue-00091, and Complaint-00039 reasonably suggests that each patient sustained an injury or illness (i.e., infection) following implantation of your firm’s Guardian System. These infections constituted serious injuries within the meaning of 21 CFR 803.3(w) because they necessitated surgical intervention (i.e., explantation) to preclude permanent impairment of a body function or permanent damage to a body structure. Your firm became aware of information that reasonably suggests that the Guardian System may have caused or contributed to a serious injury on February 13, 2024, for Complaint-00066, on November 6, 2023, for Issue-00091, and on October 28, 2022, for Complaint-00039. As such, Complaint-00066, Issue-00091, and Complaint-00039 represent MDR reportable events, as defined in 21 CFR 803.3(o)(2)(i). However, the FDA did not receive an MDR for each referenced event until April 10, 2025, which exceeded the required 30 calendar day reporting timeframe.\u003C\u002Fp>\u003Cp>The adequacy of your firm’s responses cannot be determined at this time. We acknowledge that the FDA received the manufacturer reports, submitted using the electronic equivalent of Form 3500A, for the referenced serious injury events after the 30 calendar day reporting timeframe had elapsed. However, although the response referenced the updated MDR procedure “Medical Device Vigilance Procedures,” Document No. 1716-005, as part of its correction action for the late reporting issue, a copy of the updated MDR procedure was not included.\u003C\u002Fp>\u003Cp>2. Failure to report to the FDA the information required by 21 CFR 803.52 in accordance with the requirements of 21 CFR 803.12(a), no later than 30 calendar days after the day that your firm received or otherwise became aware of information, from any source, that reasonably suggests that a device that it markets has malfunctioned and this device or a similar device that your firm markets would be likely to cause or contribute to a death or serious injury, if the malfunction were to recur, as required by 21 CFR 803.50(a)(2).\u003C\u002Fp>\u003Cp>For example, the information included for Complaints No. 00057, 00065, 00070, 00071, 00072, 00074, 00077, 00079, 00080, 00082, 00083, and 00086, reasonably suggests that your firm’s Guardian System malfunctioned while in use. Specifically, the device prematurely reached its end of service due to early battery depletion, meaning that it failed to meet its performance specifications or otherwise perform as intended under 21 CFR 803.3(k). Your firm initiated recall Z-1140-2025 for the referenced malfunction. A malfunction is reportable if the manufacturer takes or would be required to take an action under sections 518 or 519(g) of the Act as a result of the malfunction of the device or other similar devices. See Medical Devices; Medical Device User Facility and Manufacturer Reporting, Certification and Registration, 60 Fed. Reg. 63585 (Dec. 11, 1995) (referring to section 519(f), which has since been redesignated as section 519(g)). As such, the referenced complaints represent MDR reportable events, as defined under 21 CFR 803.3(o)(2)(ii).\u003C\u002Fp>\u003Cp>Your firm became aware of information on the following dates that reasonably suggests that the Guardian System had malfunctioned and this device or a similar device your firm markets would be likely to cause or contribute to a death or serious injury, if the malfunction were to recur: October 10, 2023, for Complaint No. 00057; February 26, 2024, for 00065; May 28, 2024, for 00070; May 14, 2024, for 00071; May 5, 2024, for 00072; May 14, 2024, for 00074; July 17, 2024, for 00077; August 29, 2024, for 00079; August 21, 2024, for 00080; November 19, 2024, for 0008; November 19, 2024, for 00083; and December 3, 2024, for 00086. Your firm submitted a report for each event using the MedWatch Online Voluntary Reporting Form. Specifically, MW5149541 (Complaint No. 00057), MW5153561 (Complaint No. 00065), MW5159171 (Complaint No. 00070), MW5159172 (Complaint No.00071), MW5159173 (Complaint No. 00072), MW5159805 (Complaint No. 00074), MW5160629 (Complaint No. 00077), MW5160632 (Complaint No. 00079), MW5160633 (Complaint No. 00080), MW5164478 (Complaint No. 00082), MW5164476 (Complaint No. 00083), and MW5164481 (Complaint No. 00086). The submission of reports using the voluntary MedWatch Online Voluntary Reporting Form does not fulfill reporting obligations arising under 21 CFR Part 803. An electronic submission of a mandatory report from a manufacturer must contain the information from the applicable blocks of Form FDA 3500A. All medical device reports must be submitted within the required timeframes. However, the FDA did not receive the corresponding MDRs until April 14, 2025, which exceeded the required 30 calendar day reporting timeframe.\u003C\u002Fp>\u003Cp>The adequacy of your firm’s responses cannot be determined at this time. We acknowledge that the FDA received the manufacturer reports, submitted using the electronic equivalent of Form 3500A, for the referenced malfunction events based on your firm’s retrospective review on April 14, 2025, after the 30 calendar day reporting timeframe had elapsed.\u003C\u002Fp>\u003Cp>However, although the response referenced the updated MDR procedure “Medical Device Vigilance Procedures,” Document No. 1716-005, as part of its correction action for the late reporting issue, a copy of the updated MDR procedure was not included.\u003C\u002Fp>\u003Cp>In addition, the inspection revealed that your firm failed to develop, maintain, and implement written MDR procedures as required by 21 CFR 803.17. For example, your firm presented the document titled “Medical Device Vigilance Procedures,” Document No. 1716-005, Rev. F, dated June 25, 2024, as its MDR procedure. Upon review, we conclude that the MDR procedure does not develop, maintain, and implement written MDR procedures for internal systems that provide for timely transmission of complete medical device reports to FDA, as required by 21 CFR 803.17(a)(3). Specifically, the procedure 1716-005, Rev. F does not include instructions for how your firm will comply with the 21 CFR 803.12(a) requirement to submit reports to FDA in an electronic format that FDA can process, review, and archive. As a manufacturer, you must submit reports of individual adverse events to FDA in an electronic format in accordance with 21 CFR 803.12(a) and 803.20, unless granted an exemption under 21 CFR 803.19.\u003C\u002Fp>\u003Cp>The adequacy of your firm’s responses cannot be determined at this time. While your response included a copy of the updated Complaint Procedure, Document No.1716-002, and staff training records, it referenced an update to the MDR procedure “Medical Device Vigilance Procedures,” Document No. 1716-005, without including a copy. Without the referenced document, we cannot fully assess the adequacy of the response.\u003C\u002Fp>\u003Cp>\u003Cstrong>\u003Cu>Corrections and Removals Violation\u003C\u002Fu>\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Our inspection also revealed that your firm’s Guardian System Model AMSG3‐E IMD implant devices are misbranded under section 502(t)(2) of the Act, 21 U.S.C. § 352(t)(2), in that your firm failed or refused to furnish material or information respecting the device that is required by or under section 519 of the Act, 21 U.S.C. § 360i. 21 CFR Part 806 – Medical Devices; Reports of Corrections and Removals was promulgated under section 519 of the Act, among other provisions. Violations include, but are not limited to, the following:\u003C\u002Fp>\u003Cp>Failure to submit to the FDA within 10 working days of initiating a correction or removal a report required by 21 CFR 806.10.\u003C\u002Fp>\u003Cp>Specifically, on September 18, 2023, Avertix Medical, Inc., delivered a letter to physicians who have patients implanted with a Model AMSG3‐E IMD manufactured during the period when a contamination issue was occurring on the battery production line. This issue led to premature battery depletion in the Guardian System implants, which can result in failure to monitor and earlier‐than‐expected implant replacement surgery. The letter recommends reducing the interval of regular follow-up visits and reinforcing the patient training. FDA determined that shorter device implant life leading to sooner than expected replacement surgery may present a risk to health. This action constitutes a medical device correction or removal initiated to reduce a risk to health posed by the device or remedy a violation of the Act caused by the device which may present a risk to health under 21 CFR 806.10(a). Accordingly, you were required to submit a Report of Correction or Removal to FDA within 10 working days of initiation, under 21 CFR 806.10(b). You submitted a Medical Device Report of Correction or Removal to FDA for this action on December 11, 2024.\u003C\u002Fp>\u003Cp>We reviewed your firm’s responses and conclude that they are not adequate. The responses do not contain evidence that your firm’s procedures will result in compliance with the medical device correction and removal reporting requirements in 21 CFR 806. CAPA 00020 states that management failed to recognize that it needed to submit a Report of Correction or Removal within 10 working days of initiation. Your corrective action was retraining personnel in two procedures, Complaint Procedure (1716-002) and Vigilance Procedure (1716-005). You stated that your Quality Management System (QMS) procedure specifies that recalls or corrections must be reported within 10 days. However, your responses did not include a new revision of 1716-005 nor procedure 1716-004, PRODUCT RECALLS, CORRECTIONS AND REMOVALS. Procedure 1716-004 Rev F, collected in the inspection, notes that the Recall Coordinator is responsible for communicating with regulatory agencies within defined reporting times as per the Vigilance procedure. The procedure titled MEDICAL DEVICE VIGILANCE PROCEDURES, 1716-005 Rev F, collected during the inspection, does not describe Reports of Corrections or Removals, required by 21 CFR 806. Therefore, training personnel on 1716-005 will not help personnel know the timeframe for reporting a Medical Device Correction or Removal to FDA.\u003C\u002Fp>\u003Cp>Your firm should take prompt action to address any violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\u003C\u002Fp>\u003Cp>Other federal agencies may take your compliance with the Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\u003C\u002Fp>\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which should address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\u003Cp>Your firm’s response should be sent via email to Establishment Assessment Team 1 Assistant Director Gina Brackett at CDRHEnforcement@fda.hhs.gov. Please include in the subject line, “CMS Case 711080” when replying. If you have any questions about the contents of this letter, please contact: Sean Moynihan, Compliance Officer at sean.moynihan@fda.hhs.gov.\u003C\u002Fp>\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility or associated with your firm’s devices. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\u003C\u002Fp>\u003Cp>Sincerely,\u003Cbr>\u002FS\u002F\u003C\u002Fp>\u003Cp>Matthew G. Hillebrenner\u003Cbr>Deputy Director\u003Cbr>Office of Product Evaluation and Quality\u003Cbr>Center for Devices and Radiological Health\u003C\u002Fp>\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVIA Electronic Mail\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nTimothy P. Moran\n\nRecipient Title\n\nPresident and CEO\n\nAvertix Medical, Inc.\n\n40 Christopher Way, Ste 201\n\nEatontown, NJ 07724\n\nUnited States\n\ntmoran@avertix.com\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nWARNING LETTER\nCMS # 711080\nSeptember 3, 2025\nDear Mr. Moran:\nDuring an inspection of your firm located in Eatontown, NJ from February 19, 2025, through March 11, 2025, an investigator from the United States Food and Drug Administration (FDA) determined that your firm manufactures The Guardian System, an implantable coronary syndrome event detector. The Guardian System consists of three main system components: an implantable device used to monitor a patient’s electrogram (IMD); a hand-held telemetry device that provides alarms and alerts and interfaces between the IMD and programmer (EXD); and a programmer utilized by healthcare professionals to program the IMD and alarm\u002Falert settings and retrieve and review IMD data (Programmer). Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\nQuality System Regulation Violations\nThis inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. We received responses from David Keenan, Chief Technology Officer, dated March 31, 2025, and June 20, 2025, concerning our investigator’s observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, that was issued to your firm. We address these responses below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\n1. Failure to maintain complaint files; and failure to adequately establish and maintain procedures for receiving, reviewing, and evaluating complaints by a formally designated unit as required by 21 CFR 820.198(a). Specifically, the firm’s procedure, Complaint Procedure, #1716-002, Rev Q (dated February 25, 2022) to Rev R (dated April 11, 2022) has not been adequately established in that:\na. Your firm failed to adequately maintain complaint files, as required by 21 CFR 820.198(a).\nSpecifically, section 5.1.2 of your complaint procedure requires all employees to report any product complaint or feedback from the field. Section 5.1.3 of the complaint procedure covers the review of “ISSUES” to disposition them as a “COMPLAINT” or “REJCT\u002FNo ACTION REQUIRED”. The FDA investigator identified 11 issues which meet the definition of a complaint and were not dispositioned as a complaint as required by your procedure. For example:\ni. (b)(4), reported on November 6, 2023, listing the patient effect description as “Guardian Device was removed from the patient due to a recurrent pocket infection post implant.”\nii. (b)(4), reported on March 4, 2022, listed the programmer battery connector broke when trying to remove the battery.\niii. (b)(4), reported on September 6, 2023, listed the USB Drive for Programmer was not connected and required formatting each time to use.\nAdditionally, six of eleven “nonconforming material reports” (NCMRs) reviewed during the inspection that met the definition of complaints were not considered complaints and as such were handled according to your nonconforming material process. For example:\niv. (b)(4), created April 30, 2024, states that a Programmer (PROG-003) was returned from the field due to issues with the battery charging indicator light.\nv. (b)(4), created September 6, 2023, states a USB flash drive was not functioning properly in the field and was returned.\nvi. (b)(4), created November 22, 2022, states that a field clinical engineer reported that a Programmer Battery was damaged while being inserted into the Programmer.\nThe above “issues” and “nonconforming product reports” were not evaluated for MDR reportability and were not reviewed to determine if an investigation is necessary, since they were not considered complaints.\nb. Your firm failed to adequately establish and maintain procedures to ensure that all complaints are processed in a uniform and timely manner, as required by 21 CFR 820.198(a)(1).\nSpecifically, your firm’s Complaint Procedure, #1716-002, does not include a requirement for timely and uniform complaint handling. For example, the following complaints were entered as issues and were not escalated to complaints in a timely manner:\ni. Complaint-00077: On July 17, 2024, your firm became aware of a reported issue where the physician was unable to retrieve data from the IMD implant. The complaint record was not opened until September 5, 2024 (50 days after becoming aware).\nii. Complaint-00066: On February 13, 2024, your firm became aware of an IMD explant due to an infection. The complaint record was not opened until March 28, 2024 (44 days after becoming aware).\niii. Complaint-00059: On November 30, 2023, your firm became aware of a reported “flat line IMD” event. The complaint record was not opened until January 5, 2024 (36 days after becoming aware).\niv. Complaint-00039: On October 28, 2022, your firm became aware of an IMD explant due to an infection. The complaint record was not opened until December 1, 2022 (34 days after becoming aware).\nc. Your firm failed to review, evaluate, and investigate any complaint involving the possible failure of a device, labeling, or packaging to meet any of its specifications, unless such investigation has already been performed for a similar complaint and another investigation is not necessary, as required by 21 CFR 820 820.198(c).\nSpecifically, Section 5.1.4 of your Complaint Procedure requires investigation of complaints. Your firm failed to adequately review, evaluate, and investigate the following complaints that reported patient infection and subsequent explant of the implantable cardiac monitoring device (IMD), the implantable portion of The Guardian System:\ni. (b)(4), reported on February 13, 2024, that subsequently became Complaint-00066, documents the justification for not performing an investigation as: “Physician determined patient had a pocket infection and made the decision to explant and device. No investigation needed.”\nii. (b)(4), reported on October 28, 2022, that subsequently became Complaint-00039, documents the “Initiate Investigation Process” option was selected but no investigation was performed and the “Review for Closure” section of the complaint records lists “no investigation needed.”\nWe reviewed your firm’s responses and conclude that they are not adequate. In the response, your firm states that CAPA 00015 was opened to capture all corrective and preventive work performed in relation to this observation. As part of CAPA 00015, your firm promised to (b)(4). Your firm also promised to (b)(4). However, the response does not address performing a retrospective review of all issues and nonconforming product reports to determine if other complaints exist and if investigations need to be performed. Several of the items promised by your firm continue to be in-progress (including but not limited to (b)(4).\n2. Failure to adequately establish and maintain procedures to control product that does not conform to specified requirements. The procedures shall address the identification, documentation, evaluation, segregation, and disposition of nonconforming product. The evaluation of nonconformance shall include a determination of the need for an investigation and notification of the persons or organizations responsible for the nonconformance. The evaluation and any investigation shall be documented, as required by 21 CFR 820.90(a).\nSpecifically, your Nonconformance Material Procedure, #1707-002, does not include a provision for the determination of the need for an investigation. For example, the following two nonconformances did not include a documented investigation or evaluation:\na. (b)(4) was created on June 27, 2024, for IMD batteries that were sent to your contract manufacturer for use in production were returned due to nonconformances (bent prongs). The disposition of the batteries was recorded as being scrapped. However, there was no investigation conducted into the cause of the bent probes and the nonconformance record does not include a rationale for not investigating.\nb. (b)(4) was created on June 7, 2023, for the EXD-001 Battery Packaging Label (p\u002Fn (b)(4)) on the EXD-001 Battery, 10 Packs (p\u002Fn (b)(4)) listing an incorrect expiration date and battery lot code in finished goods inventory. Your firm reworked the nonconforming product. However, there was no investigation conducted into the cause of the incorrect labeling and the nonconformance record does not include a rationale for not investigating.\nWe reviewed your firm’s responses and conclude that they are not adequate. Your response promises to (b)(4) as well as plans to (b)(4). All activities are captured in CAPA 00017 and all work is promised by (b)(4). However, your response fails to address if a retrospective review of NCMRs will be conducted. Several of these promised actions (including CAPA 00017) remain in-progress with a tentative CAPA Effectiveness Verification planned due date of (b)(4).\n3. Failure to adequately establish and maintain procedures for validating the device design to include adequate risk analysis, as required by 21 CFR 820.30(g). Specifically, section 6.14 of your Risk Management Procedure, #1701-011, covers the information collection, information review, and actions related to the use of the Corrective and Preventive Action System and the Complaint System to monitor the device in the clinical and post-production phase to determine if reassessment of risks and\u002For assessment of new risks is necessary. Your firm failed to reassess the risk when estimated risks from a hazard differed from the actual risk observed in post-market CAPA and complaint data. For example:\na. Your firm has received three complaints of infection with the IMD portion of the Guardian System out of a total of (b)(4) IMDs implanted as of February 25, 2025. The observed rate of infection is (b)(4)%. In your device risk file, Guardian System Risk Assessment – P18, #0201-0200-001#P18, Rev B, dated November 13, 2023, the rate of infection was estimated to be (b)(4)%. The risk was not reassessed.\nb. Your firm has received 24 complaints of battery failure due to electrical short before the device reached its expected service life of 6 years, causing patients to opt for early explant and\u002For replacement. The observed rate of battery failure is (b)(4)%. In your device risk file, IMD AMSG3-E Hardware FMECA Report – P16, #0212-0201-001#P16, Rev A; dated February 24, 2015, the rate of battery failure was estimated to be (b)(4)%. Further, your firm initiated CAPA-00012 in response to the battery failures. The “Process Impacts” section of this CAPA indicates that no updates to risk management were needed. The risk was not reassessed.\nWe reviewed your firm’s responses and conclude that they are not adequate. In the response, your firm indicates that CAPA 00016 was opened to address any corrective and preventive work taken as result of the observation including to assess the risk associated with infection using current performance data against historical data and to address the need to perform risk reviews on a regularly scheduled basis to keep the risk data current by July 1, 2025. However, your firm did not indicate if you intend to review, and update as necessary, the risk file utilizing post-market data for items other than risk of infection. Several of the items promised by your firm continue to be in-progress, including but not limited to (b)(4) which has a (b)(4) planned due date of (b)(4).\n4. Failure to adequately establish and maintain procedures for implementing corrective and preventive action, as required by 21 CFR 820.100(a). Specifically, your firm failed to follow your procedure, Corrective and Preventive Action Procedure, #1708-001, Rev J, dated October 23, 2020, when taking corrective and preventive actions. Two examples of lack of CAPA procedure implementation are as follows:\na. Your firm failed to follow your CAPA process for a corrective action taken as a result of a consumer complaint which led to a revision made to manufacturing procedure Process Specification, PROG-004 Final Shipping Manufacturing, #0217-1200-020#P18, Rev F, dated November 19, 2024. These actions were taken outside of the CAPA system and lack a documented CAPA investigation as well as verification of implementation and effectiveness.\nb. Your firm failed to verify or validate the corrective and preventive action to ensure that such action is effective and does not adversely affect the finished device, as required by 21 CFR 820.100(a)(4). Specifically, section 5.9 of the Corrective and Preventive Action Procedure, #1708-001, Rev J, dated October 23, 2020, describes your firm’s process for establishing verification of effectiveness plans with predetermined criteria that verify if corrective and\u002For preventive actions were effective. Additionally, section 5.10 of the Corrective and Preventive Action Procedure, #1708-001, Rev J, dated October 23, 2020, describes the process for conducting the verification of effectiveness (VOE) phase to demonstrate effectiveness.\nReview of five CAPAs closed between January 2022 and the time of the current inspection disclosed that four CAPAs (CAPA-00007, CAPA-00008, CAPA-00010, and CAPA-00014) lacked evidence that your firm verified or validated that the action taken was effective.\nFor example, CAPA-00007, was opened as a result of the previous inspection on March 15, 2022, related to a complaint involving EXD batteries having expired shelf life. Your firm implemented several corrective actions to correct the issue which were documented utilizing the complaint record (complaint number 00013) instead of through the CAPA system. CAPA-00007 was closed on March 31, 2022, without verifying the effectiveness of the correction and preventive actions taken.\nWe reviewed your firm’s responses and conclude that they are not adequate. In this response, your firm opened CAPA 00016 to document actions taken for this observation. Your firm promises to (b)(4). For the 5 CAPAs lacking VOE plans and reports, your firm asks our Agency if (b)(4) (2021 or earlier). The decision to (b)(4) remains your firm’s decision as long as it is based on a rationale you determine to be appropriate given the 21 CFR 820.100(a)(4) and your own procedural requirement to demonstrate effectiveness of a CAPA action. You are also going to (b)(4). Your response does not address if other CAPAs will be reviewed to determine if (b)(4). Several of the items promised by your firm continue to be in-progress (including but not limited to (b)(4).\n5. Failure to validate with a high degree of assurance and approve according to established procedures, a process whose results cannot be fully verified by subsequent inspection and test, as required by 21 CFR 820.75(a). Specifically, your firm’s Process Validation Procedure, #1705-002, Rev E, dated October 23, 2020, and Process Qualification Procedure, #1705-001, Rev F, dated October 23, 2020, were not adequately established in that both procedures fail to address sterilization validation. Your firm’s implantable cardiac monitoring device (IMD) undergoes (b)(4) sterilization. Further, the two procedures fail to document the process of requalification and revalidation (if necessary) of the sterilization cycle.\nFor example, the (b)(4) sterilization process for your firm’s IMD was last performed in June 2022 by a 3rd party in accordance with FDA-recognized standard ANSI\u002FAAMI\u002FISO 11135:2014. Your firm has not reviewed the (b)(4) sterilization process since the 2022 requalification.\nWe reviewed your firm’s responses and conclude that they are not adequate. In the responses, you indicate that CAPA 00019 was opened as a result of the observation and that your firm promises to (b)(4). However, your responses do not address if your firm’s plans to revise your process validation procedures to include sterilization. Additionally, supporting evidence (including CAPA 00019) of these promised actions remain in progress with a CAPA Effectiveness Verification planned due date for CAPA 00019 of (b)(4).\n6. Failure to adequately establish and maintain the requirements, including quality requirements, that must be met by suppliers, contractors, and consultants, as required by 21 CFR 820.50(a). Specifically, your Supplier Management Procedure (#1703-003), has not been fully implemented. For example:\na. Your firm’s Supplier Management Procedure (#1703-003) describes a process for supplier evaluation and acceptance using a supplier evaluation form. The Supplier Evaluation Form for the IMD battery supplier, (dated February 13, 2020), indicated your firm’s contract manufacturer would perform receiving inspections of these batteries and provide (b)(4) to Avertix. Your QA\u002FQC manager stated these (b)(4) were not completed.\nb. Your firm failed to adequately establish and maintain records of acceptable suppliers, contractors, and consultants, as required by 21 CFR 820.50(a)(3). Specifically, section 7.1.12 of Supplier Management Procedure, Rev K, states that “Quality Assurance is responsible for revising the Approved Supplier List with changes made based on acceptance\u002Frejection of potential suppliers\u002Fre-evaluated suppliers\u002Fdeactivated suppliers…” A software supplier used by your firm since 2023 to meet the requirements of the Medical Device Tracking regulation was not listed on your Approved Supplier List (Rev L, dated June 15, 2023).\nWe reviewed your firm’s responses and conclude that they are not adequate. In the responses, your firm promises and provided revisions to your Supplier Management Procedure (Document 1703-003) removing the requirement for (b)(4) for your contract manufacturer and to evidence of a new supplier evaluation for the software supplier utilized for medical device tracking by July 1, 2025. The responses do not indicate if other supplier evaluations will be evaluated and updated, as needed. Further, CAPA 00023 remains in progress with a CAPA Effectiveness Verification planned due date of December 1, 2025.\nMedical Device Reporting (MDR) Violations\nOur inspection also revealed that your firm’s Guardian System devices are misbranded under section 502(t)(2) of the Act, 21 U.S.C. § 352(t)(2), in that your firm failed or refused to furnish material or information respecting the device that is required by or under section 519 of the Act, 21 U.S.C. § 360i. 21 CFR Part 803 - Medical Device Reporting was promulgated under section 519 of the Act, among other provisions. Significant violations include, but are not limited to, the following:\n1. Failure to report to the FDA the information required by 21 CFR 803.52 in accordance with the requirements of 21 CFR 803.12(a), no later than 30 calendar days after the day that your firm received or otherwise became aware of information, from any source, that reasonably suggests that a device that it markets may have caused or contributed to a death or serious injury, as required by 21 CFR 803.50(a)(1).\nFor example, the information included for Complaint-00066, Issue-00091, and Complaint-00039 reasonably suggests that each patient sustained an injury or illness (i.e., infection) following implantation of your firm’s Guardian System. These infections constituted serious injuries within the meaning of 21 CFR 803.3(w) because they necessitated surgical intervention (i.e., explantation) to preclude permanent impairment of a body function or permanent damage to a body structure. Your firm became aware of information that reasonably suggests that the Guardian System may have caused or contributed to a serious injury on February 13, 2024, for Complaint-00066, on November 6, 2023, for Issue-00091, and on October 28, 2022, for Complaint-00039. As such, Complaint-00066, Issue-00091, and Complaint-00039 represent MDR reportable events, as defined in 21 CFR 803.3(o)(2)(i). However, the FDA did not receive an MDR for each referenced event until April 10, 2025, which exceeded the required 30 calendar day reporting timeframe.\nThe adequacy of your firm’s responses cannot be determined at this time. We acknowledge that the FDA received the manufacturer reports, submitted using the electronic equivalent of Form 3500A, for the referenced serious injury events after the 30 calendar day reporting timeframe had elapsed. However, although the response referenced the updated MDR procedure “Medical Device Vigilance Procedures,” Document No. 1716-005, as part of its correction action for the late reporting issue, a copy of the updated MDR procedure was not included.\n2. Failure to report to the FDA the information required by 21 CFR 803.52 in accordance with the requirements of 21 CFR 803.12(a), no later than 30 calendar days after the day that your firm received or otherwise became aware of information, from any source, that reasonably suggests that a device that it markets has malfunctioned and this device or a similar device that your firm markets would be likely to cause or contribute to a death or serious injury, if the malfunction were to recur, as required by 21 CFR 803.50(a)(2).\nFor example, the information included for Complaints No. 00057, 00065, 00070, 00071, 00072, 00074, 00077, 00079, 00080, 00082, 00083, and 00086, reasonably suggests that your firm’s Guardian System malfunctioned while in use. Specifically, the device prematurely reached its end of service due to early battery depletion, meaning that it failed to meet its performance specifications or otherwise perform as intended under 21 CFR 803.3(k). Your firm initiated recall Z-1140-2025 for the referenced malfunction. A malfunction is reportable if the manufacturer takes or would be required to take an action under sections 518 or 519(g) of the Act as a result of the malfunction of the device or other similar devices. See Medical Devices; Medical Device User Facility and Manufacturer Reporting, Certification and Registration, 60 Fed. Reg. 63585 (Dec. 11, 1995) (referring to section 519(f), which has since been redesignated as section 519(g)). As such, the referenced complaints represent MDR reportable events, as defined under 21 CFR 803.3(o)(2)(ii).\nYour firm became aware of information on the following dates that reasonably suggests that the Guardian System had malfunctioned and this device or a similar device your firm markets would be likely to cause or contribute to a death or serious injury, if the malfunction were to recur: October 10, 2023, for Complaint No. 00057; February 26, 2024, for 00065; May 28, 2024, for 00070; May 14, 2024, for 00071; May 5, 2024, for 00072; May 14, 2024, for 00074; July 17, 2024, for 00077; August 29, 2024, for 00079; August 21, 2024, for 00080; November 19, 2024, for 0008; November 19, 2024, for 00083; and December 3, 2024, for 00086. Your firm submitted a report for each event using the MedWatch Online Voluntary Reporting Form. Specifically, MW5149541 (Complaint No. 00057), MW5153561 (Complaint No. 00065), MW5159171 (Complaint No. 00070), MW5159172 (Complaint No.00071), MW5159173 (Complaint No. 00072), MW5159805 (Complaint No. 00074), MW5160629 (Complaint No. 00077), MW5160632 (Complaint No. 00079), MW5160633 (Complaint No. 00080), MW5164478 (Complaint No. 00082), MW5164476 (Complaint No. 00083), and MW5164481 (Complaint No. 00086). The submission of reports using the voluntary MedWatch Online Voluntary Reporting Form does not fulfill reporting obligations arising under 21 CFR Part 803. An electronic submission of a mandatory report from a manufacturer must contain the information from the applicable blocks of Form FDA 3500A. All medical device reports must be submitted within the required timeframes. However, the FDA did not receive the corresponding MDRs until April 14, 2025, which exceeded the required 30 calendar day reporting timeframe.\nThe adequacy of your firm’s responses cannot be determined at this time. We acknowledge that the FDA received the manufacturer reports, submitted using the electronic equivalent of Form 3500A, for the referenced malfunction events based on your firm’s retrospective review on April 14, 2025, after the 30 calendar day reporting timeframe had elapsed.\nHowever, although the response referenced the updated MDR procedure “Medical Device Vigilance Procedures,” Document No. 1716-005, as part of its correction action for the late reporting issue, a copy of the updated MDR procedure was not included.\nIn addition, the inspection revealed that your firm failed to develop, maintain, and implement written MDR procedures as required by 21 CFR 803.17. For example, your firm presented the document titled “Medical Device Vigilance Procedures,” Document No. 1716-005, Rev. F, dated June 25, 2024, as its MDR procedure. Upon review, we conclude that the MDR procedure does not develop, maintain, and implement written MDR procedures for internal systems that provide for timely transmission of complete medical device reports to FDA, as required by 21 CFR 803.17(a)(3). Specifically, the procedure 1716-005, Rev. F does not include instructions for how your firm will comply with the 21 CFR 803.12(a) requirement to submit reports to FDA in an electronic format that FDA can process, review, and archive. As a manufacturer, you must submit reports of individual adverse events to FDA in an electronic format in accordance with 21 CFR 803.12(a) and 803.20, unless granted an exemption under 21 CFR 803.19.\nThe adequacy of your firm’s responses cannot be determined at this time. While your response included a copy of the updated Complaint Procedure, Document No.1716-002, and staff training records, it referenced an update to the MDR procedure “Medical Device Vigilance Procedures,” Document No. 1716-005, without including a copy. Without the referenced document, we cannot fully assess the adequacy of the response.\nCorrections and Removals Violation\nOur inspection also revealed that your firm’s Guardian System Model AMSG3‐E IMD implant devices are misbranded under section 502(t)(2) of the Act, 21 U.S.C. § 352(t)(2), in that your firm failed or refused to furnish material or information respecting the device that is required by or under section 519 of the Act, 21 U.S.C. § 360i. 21 CFR Part 806 – Medical Devices; Reports of Corrections and Removals was promulgated under section 519 of the Act, among other provisions. Violations include, but are not limited to, the following:\nFailure to submit to the FDA within 10 working days of initiating a correction or removal a report required by 21 CFR 806.10.\nSpecifically, on September 18, 2023, Avertix Medical, Inc., delivered a letter to physicians who have patients implanted with a Model AMSG3‐E IMD manufactured during the period when a contamination issue was occurring on the battery production line. This issue led to premature battery depletion in the Guardian System implants, which can result in failure to monitor and earlier‐than‐expected implant replacement surgery. The letter recommends reducing the interval of regular follow-up visits and reinforcing the patient training. FDA determined that shorter device implant life leading to sooner than expected replacement surgery may present a risk to health. This action constitutes a medical device correction or removal initiated to reduce a risk to health posed by the device or remedy a violation of the Act caused by the device which may present a risk to health under 21 CFR 806.10(a). Accordingly, you were required to submit a Report of Correction or Removal to FDA within 10 working days of initiation, under 21 CFR 806.10(b). You submitted a Medical Device Report of Correction or Removal to FDA for this action on December 11, 2024.\nWe reviewed your firm’s responses and conclude that they are not adequate. The responses do not contain evidence that your firm’s procedures will result in compliance with the medical device correction and removal reporting requirements in 21 CFR 806. CAPA 00020 states that management failed to recognize that it needed to submit a Report of Correction or Removal within 10 working days of initiation. Your corrective action was retraining personnel in two procedures, Complaint Procedure (1716-002) and Vigilance Procedure (1716-005). You stated that your Quality Management System (QMS) procedure specifies that recalls or corrections must be reported within 10 days. However, your responses did not include a new revision of 1716-005 nor procedure 1716-004, PRODUCT RECALLS, CORRECTIONS AND REMOVALS. Procedure 1716-004 Rev F, collected in the inspection, notes that the Recall Coordinator is responsible for communicating with regulatory agencies within defined reporting times as per the Vigilance procedure. The procedure titled MEDICAL DEVICE VIGILANCE PROCEDURES, 1716-005 Rev F, collected during the inspection, does not describe Reports of Corrections or Removals, required by 21 CFR 806. Therefore, training personnel on 1716-005 will not help personnel know the timeframe for reporting a Medical Device Correction or Removal to FDA.\nYour firm should take prompt action to address any violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\nOther federal agencies may take your compliance with the Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which should address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the Act, include your reasoning and any supporting information for our consideration as part of your response.\nYour firm’s response should be sent via email to Establishment Assessment Team 1 Assistant Director Gina Brackett at CDRHEnforcement@fda.hhs.gov. Please include in the subject line, “CMS Case 711080” when replying. If you have any questions about the contents of this letter, please contact: Sean Moynihan, Compliance Officer at sean.moynihan@fda.hhs.gov.\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility or associated with your firm’s devices. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\nSincerely,\n\u002FS\u002F\nMatthew G. Hillebrenner\nDeputy Director\nOffice of Product Evaluation and Quality\nCenter for Devices and Radiological Health","Avertix Medical, Inc.","avertix-medical-inc-711080-09032025","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Favertix-medical-inc-711080-09032025","2026-10-26T08:07:59.649711+00:00","2026-03-17","711080","Timothy P. Moran","2026-08-19T04:50:38.23+00:00","2025-09-03",{"id":152,"raw":153,"subject":158,"body_html":159,"body_text":160,"firm_name":161,"letter_id":162,"created_at":127,"fei_number":19,"letter_url":163,"updated_at":164,"action_type":22,"case_status":23,"posted_date":165,"marcs_cms_no":166,"product_type":50,"closeout_date":19,"issuing_office":38,"recipient_name":167,"body_fetched_at":168,"delivery_method":93,"recipient_title":19,"reference_number":19,"action_taken_date":169,"medical_device_id":19,"response_letter_date":19},63,[154,155,156,38,157,13,13,13],"\u003Ctime datetime=\"2026-06-30T04:00:00Z\">06\u002F30\u002F2026\u003C\u002Ftime>\n","\u003Ctime datetime=\"2026-05-20T04:00:00Z\">05\u002F20\u002F2026\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fbmc-medical-co-ltd-725759-05202026\">BMC Medical Co., Ltd.\u003C\u002Fa>","CGMP\u002FQSR\u002FMedical Devices\u002FPMA\u002FAdulterated\u002FMisbranded\u003Cbr \u002F>\r\n","CGMP\u002FQSR\u002FMedical Devices\u002FPMA\u002FAdulterated\u002FMisbranded","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>VIA Electronic Mail\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Jian Xu\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>President\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>BMC Medical Co., Ltd.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>No. 16 Lize Road\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Room 10, 17F Building 4, Huiya Plaza\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Fengtai Qu\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Beijing Shi\u003C\u002Fspan>, \u003Cspan>100073\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>China\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:(b)(6)\"> (b)(6)\u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003Cbr>\u003Cstrong>CMS # 725759\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>May 20, 2026\u003C\u002Fp>\u003Cp>Dear Mr. Xu:\u003C\u002Fp>\u003Cp>During an inspection of 3B Medical, Inc. (d.b.a. React Health, Inc.) located at 5475 Rings Road, Dublin, OH 43017 from December 1, 2025 through December 10, 2025, an investigator from the United States Food and Drug Administration (FDA) determined that your firm is the specification developer and 510(k) owner of various ventilator devices that are imported to the United States by 3B Medical, Inc. This includes Auto-Adjusting Positive Airway Pressure (Auto-CPAP or APAP) ventilator devices, intended for the treatment of obstructive sleep apnea in adults, under the brand name of G3X APAP (G4600). Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or function of the body.\u003C\u002Fp>\u003Cp>\u003Cstrong>\u003Cu>Unapproved Device Violations\u003C\u002Fu>\u003C\u002Fstrong>\u003Cbr>Our inspection revealed that your G3X APAP devices are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). The devices are also misbranded under section 502(o) of the Act, 21 U.S.C. § 352(o), because your firm introduced or delivered for introduction into interstate commerce for commercial distribution these devices with significant changes or modifications without submitting a new premarket notification to FDA, as required by section 510(k) of the Act, 21 U.S.C. § 360(k), and 21 CFR 807.81(a)(3). For a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the agency. [21 CFR 807.81(b)]. The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\u003C\u002Fp>\u003Cp>Your firm has made significant changes or modifications to the design of the Luna® CPAP and Auto CPAP System which was granted clearance on September 8, 2016 under 510(k) number K153387. The inspection at 3B Medical, Inc. established that you are the design change authority and 510(k) owner of the device. For example, FDA has reviewed your firm’s nP3_Product System Verification Report_G3-2.11.01 and Design change evaluation report, Project code: nP3 for the Luna G3 APAP, Model LG3600, approved on March 12, 2025, which revealed that the firmware\u002Fsoftware was updated with additional recognition features, i.e., (1) Flow Limitation, (2) Respiratory Effort-Related Arousals (RERA), and (3) Periodic breathing, to distinguish between central hypopnea and obstructive hypopnea events.\u003C\u002Fp>\u003Cp>Furthermore, the sound abatement system of the cleared Luna APAP devices was modified to ‘\u003Cstrong>(b)(4)\u003C\u002Fstrong>’ or ‘\u003Cstrong>(b)(4)\u003C\u002Fstrong>’ and a new \u003Cstrong>(b)(4)\u003C\u002Fstrong> was added to the cleared Luna APAP device to match the sound reduction as a result of the material change. Additionally, the Printed Circuit Board Assembly (PCBA) includes a new \u003Cstrong>(b)(4)\u003C\u002Fstrong> chip compatible with the new algorithm and new data structure master control software. These design modifications to the cleared Luna APAP appear to have given rise to a new model branded as G3X APAP. These changes could significantly affect safety or effectiveness because they are significant changes in the design and materials of these devices. The firmware update introduced new detection algorithms capable of distinguishing between central and obstructive hypopnea events, which affects the accuracy of event classification and the data available to clinicians for evaluating therapy effectiveness and informing future therapy adjustments. The removal of \u003Cstrong>(b)(4)\u003C\u002Fstrong> represents a material change to the gas pathway that raises biocompatibility concerns, and when combined with the addition of a new \u003Cstrong>(b)(4)\u003C\u002Fstrong>, these changes could affect the overall pressure and flow profile of the device, thereby impacting therapy delivery. The addition of a new \u003Cstrong>(b)(4)\u003C\u002Fstrong> PCBA chip and updated master control software introduces potential implications for electrical safety and overall device performance. Collectively, these changes represent significant modifications in device design, materials, and software that could significantly affect the safety and effectiveness of the device.\u003C\u002Fp>\u003Cp>FDA’s regulations at 21 CFR 807.81(a)(3)(i) provide that submission of a 510(k) is required for “a change or modification in the device that could significantly affect the safety or effectiveness of the device, e.g., a significant change or modification in design, material, chemical composition, energy source, or manufacturing process.” Thus, the G3X APAP is misbranded under 502(o) because of your failure to submit the required premarket notification for the modifications. FDA requests that your firm cease any activities that result in the misbranding or adulteration of your devices.\u003C\u002Fp>\u003Cp>For further explanation on the need for a new premarket notification, or \"510(k),\" for changes to the intended use or design affecting safety and effectiveness, consult the guidance document \"Deciding When to Submit a 510(k) for a Change to an Existing Device — Guidance for Industry and Food and Drug Administration Staff (fda.gov).\" The “Requests for Feedback and Meetings for Medical Device Submissions: The Q-Submission Program Guidance for Industry and Food and Drug Administration Staff,” is also recommended for obtaining FDA feedback on the 510(k) submission for the G3 X APAP devices.\u003C\u002Fp>\u003Cp>\u003Cstrong>\u003Cu>Correction and Removals Violations\u003C\u002Fu>\u003C\u002Fstrong>\u003Cbr>Our inspection also revealed that your firm’s Luna G3 APAP devices are misbranded under section 502(t)(2) of the Act, 21 U.S.C. § 352(t)(2), in that your firm failed or refused to furnish material or information respecting the device that is required by or under section 519 of the Act, 21 U.S.C. § 360i, and 21 CFR Part 806 – Medical Devices; Reports of Corrections and Removals.\u003C\u002Fp>\u003Cp>Significant violations include, but are not limited to, the following:\u003C\u002Fp>\u003Cp>1. Failure to submit a Report required by 21 CFR 806.10 to FDA, within 10 working days of initiating the correction or removal. For example: your Luna G3 APAP devices with firmware G3-2.00.76 could cause the Luna G3 APAP device to unexpectedly shut down during use, which causes loss of therapy for patients with obstructive sleep apnea. You communicated with 3B (React Health) in \u003Cstrong>(b)(4)\u003C\u002Fstrong> to \u003Cstrong>(b)(4)\u003C\u002Fstrong>. The action of updating the firmware to G3-2.00.77 is a medical device correction or removal initiated to reduce a risk to health posed by the device or to remedy a violation of the Act caused by the device which may present a risk to health, for which you are required to submit a Report of Correction or Removal to FDA.\u003C\u002Fp>\u003Cp>Your firm has not submitted a Report of Correction or Removal to FDA for the firmware update to G3-2.00.77 as of May 19, 2026.\u003C\u002Fp>\u003Cp>Other federal agencies may take your compliance with the FD&amp;C Act and its implementing regulations into account when considering the award of federal contracts.\u003C\u002Fp>\u003Cp>On February 2, 2024, the FDA issued a final rule amending the device current good manufacturing practice (CGMP) requirements of the Quality System (QS) Regulation under 21 CFR 820 to align more closely with the international consensus standard for Quality Management Systems for medical devices used by many other regulatory authorities around the world. The revised part 820, referred to as the Quality Management System Regulation (QMSR), became effective on February 2, 2026. The inspection of 3B Medical on December 1, 2025 to December 10, 2025 was conducted pursuant to the QS Regulation, which was in effect at the time of the inspection. However, should any corrective actions you propose or implement relate to device current good manufacturing practice (CGMP) requirements, they must be made pursuant to the QMSR requirements in effect as of February 2, 2026. For more information on the QMSR please refer to our frequently asked questions webpage: https:\u002F\u002Fwww.fda.gov\u002Fmedical-devices\u002Fquality-system-qs-regulationmedical-device-current-good-manufacturing-practices-cgmp\u002Fquality-management-system-regulation-final-rule-amending-quality-system-regulation-frequently-asked.\u003C\u002Fp>\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, including an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective action (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Please provide a translation of documentation not in English to facilitate our review. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\u003Cp>Your firm’s response should be sent via email to Gina Brackett, Establishment Assessment Team 1 Assistant Director at CDRHEnforcement@fda.hhs.gov. Please include in the subject line, “CMS Case 725759” when replying. If you have any questions about the contents of this letter, please contact: Sargum Morgan, Compliance Officer at sargum.morgan@fda.hhs.gov.\u003C\u002Fp>\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\u003C\u002Fp>\u003Cp>Sincerely,\u003Cbr>\u002FS\u002F\u003C\u002Fp>\u003Cp>Barbara A. Marsden\u003Cbr>Director\u003Cbr>Office of Regulatory Programs\u003Cbr>Office of Product Evaluation and Quality\u003Cbr>Center for Devices and Radiological Health\u003C\u002Fp>\u003Cp>CC:\u003Cbr>\u003Cstrong>(b)(4), (b)(6)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVIA Electronic Mail\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nJian Xu\n\nRecipient Title\n\nPresident\n\nBMC Medical Co., Ltd.\n\nNo. 16 Lize Road\n\nRoom 10, 17F Building 4, Huiya Plaza\n\nFengtai Qu\n\nBeijing Shi, 100073\n\nChina\n\n(b)(6)\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nWARNING LETTER\nCMS # 725759\nMay 20, 2026\nDear Mr. Xu:\nDuring an inspection of 3B Medical, Inc. (d.b.a. React Health, Inc.) located at 5475 Rings Road, Dublin, OH 43017 from December 1, 2025 through December 10, 2025, an investigator from the United States Food and Drug Administration (FDA) determined that your firm is the specification developer and 510(k) owner of various ventilator devices that are imported to the United States by 3B Medical, Inc. This includes Auto-Adjusting Positive Airway Pressure (Auto-CPAP or APAP) ventilator devices, intended for the treatment of obstructive sleep apnea in adults, under the brand name of G3X APAP (G4600). Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or function of the body.\nUnapproved Device Violations\nOur inspection revealed that your G3X APAP devices are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). The devices are also misbranded under section 502(o) of the Act, 21 U.S.C. § 352(o), because your firm introduced or delivered for introduction into interstate commerce for commercial distribution these devices with significant changes or modifications without submitting a new premarket notification to FDA, as required by section 510(k) of the Act, 21 U.S.C. § 360(k), and 21 CFR 807.81(a)(3). For a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the agency. [21 CFR 807.81(b)]. The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\nYour firm has made significant changes or modifications to the design of the Luna® CPAP and Auto CPAP System which was granted clearance on September 8, 2016 under 510(k) number K153387. The inspection at 3B Medical, Inc. established that you are the design change authority and 510(k) owner of the device. For example, FDA has reviewed your firm’s nP3_Product System Verification Report_G3-2.11.01 and Design change evaluation report, Project code: nP3 for the Luna G3 APAP, Model LG3600, approved on March 12, 2025, which revealed that the firmware\u002Fsoftware was updated with additional recognition features, i.e., (1) Flow Limitation, (2) Respiratory Effort-Related Arousals (RERA), and (3) Periodic breathing, to distinguish between central hypopnea and obstructive hypopnea events.\nFurthermore, the sound abatement system of the cleared Luna APAP devices was modified to ‘(b)(4)’ or ‘(b)(4)’ and a new (b)(4) was added to the cleared Luna APAP device to match the sound reduction as a result of the material change. Additionally, the Printed Circuit Board Assembly (PCBA) includes a new (b)(4) chip compatible with the new algorithm and new data structure master control software. These design modifications to the cleared Luna APAP appear to have given rise to a new model branded as G3X APAP. These changes could significantly affect safety or effectiveness because they are significant changes in the design and materials of these devices. The firmware update introduced new detection algorithms capable of distinguishing between central and obstructive hypopnea events, which affects the accuracy of event classification and the data available to clinicians for evaluating therapy effectiveness and informing future therapy adjustments. The removal of (b)(4) represents a material change to the gas pathway that raises biocompatibility concerns, and when combined with the addition of a new (b)(4), these changes could affect the overall pressure and flow profile of the device, thereby impacting therapy delivery. The addition of a new (b)(4) PCBA chip and updated master control software introduces potential implications for electrical safety and overall device performance. Collectively, these changes represent significant modifications in device design, materials, and software that could significantly affect the safety and effectiveness of the device.\nFDA’s regulations at 21 CFR 807.81(a)(3)(i) provide that submission of a 510(k) is required for “a change or modification in the device that could significantly affect the safety or effectiveness of the device, e.g., a significant change or modification in design, material, chemical composition, energy source, or manufacturing process.” Thus, the G3X APAP is misbranded under 502(o) because of your failure to submit the required premarket notification for the modifications. FDA requests that your firm cease any activities that result in the misbranding or adulteration of your devices.\nFor further explanation on the need for a new premarket notification, or \"510(k),\" for changes to the intended use or design affecting safety and effectiveness, consult the guidance document \"Deciding When to Submit a 510(k) for a Change to an Existing Device — Guidance for Industry and Food and Drug Administration Staff (fda.gov).\" The “Requests for Feedback and Meetings for Medical Device Submissions: The Q-Submission Program Guidance for Industry and Food and Drug Administration Staff,” is also recommended for obtaining FDA feedback on the 510(k) submission for the G3 X APAP devices.\nCorrection and Removals Violations\nOur inspection also revealed that your firm’s Luna G3 APAP devices are misbranded under section 502(t)(2) of the Act, 21 U.S.C. § 352(t)(2), in that your firm failed or refused to furnish material or information respecting the device that is required by or under section 519 of the Act, 21 U.S.C. § 360i, and 21 CFR Part 806 – Medical Devices; Reports of Corrections and Removals.\nSignificant violations include, but are not limited to, the following:\n1. Failure to submit a Report required by 21 CFR 806.10 to FDA, within 10 working days of initiating the correction or removal. For example: your Luna G3 APAP devices with firmware G3-2.00.76 could cause the Luna G3 APAP device to unexpectedly shut down during use, which causes loss of therapy for patients with obstructive sleep apnea. You communicated with 3B (React Health) in (b)(4) to (b)(4). The action of updating the firmware to G3-2.00.77 is a medical device correction or removal initiated to reduce a risk to health posed by the device or to remedy a violation of the Act caused by the device which may present a risk to health, for which you are required to submit a Report of Correction or Removal to FDA.\nYour firm has not submitted a Report of Correction or Removal to FDA for the firmware update to G3-2.00.77 as of May 19, 2026.\nOther federal agencies may take your compliance with the FD&C Act and its implementing regulations into account when considering the award of federal contracts.\nOn February 2, 2024, the FDA issued a final rule amending the device current good manufacturing practice (CGMP) requirements of the Quality System (QS) Regulation under 21 CFR 820 to align more closely with the international consensus standard for Quality Management Systems for medical devices used by many other regulatory authorities around the world. The revised part 820, referred to as the Quality Management System Regulation (QMSR), became effective on February 2, 2026. The inspection of 3B Medical on December 1, 2025 to December 10, 2025 was conducted pursuant to the QS Regulation, which was in effect at the time of the inspection. However, should any corrective actions you propose or implement relate to device current good manufacturing practice (CGMP) requirements, they must be made pursuant to the QMSR requirements in effect as of February 2, 2026. For more information on the QMSR please refer to our frequently asked questions webpage: https:\u002F\u002Fwww.fda.gov\u002Fmedical-devices\u002Fquality-system-qs-regulationmedical-device-current-good-manufacturing-practices-cgmp\u002Fquality-management-system-regulation-final-rule-amending-quality-system-regulation-frequently-asked.\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, including an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective action (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Please provide a translation of documentation not in English to facilitate our review. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration as part of your response.\nYour firm’s response should be sent via email to Gina Brackett, Establishment Assessment Team 1 Assistant Director at CDRHEnforcement@fda.hhs.gov. Please include in the subject line, “CMS Case 725759” when replying. If you have any questions about the contents of this letter, please contact: Sargum Morgan, Compliance Officer at sargum.morgan@fda.hhs.gov.\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\nSincerely,\n\u002FS\u002F\nBarbara A. Marsden\nDirector\nOffice of Regulatory Programs\nOffice of Product Evaluation and Quality\nCenter for Devices and Radiological Health\nCC:\n(b)(4), (b)(6)","BMC Medical Co., Ltd.","bmc-medical-co-ltd-725759-05202026","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fbmc-medical-co-ltd-725759-05202026","2026-10-26T08:08:06.951272+00:00","2026-06-30","725759","Jian Xu","2026-08-19T04:32:13.877+00:00","2026-05-20",{"id":171,"raw":172,"subject":158,"body_html":176,"body_text":177,"firm_name":178,"letter_id":179,"created_at":18,"fei_number":19,"letter_url":180,"updated_at":181,"action_type":22,"case_status":23,"posted_date":182,"marcs_cms_no":183,"product_type":50,"closeout_date":19,"issuing_office":38,"recipient_name":184,"body_fetched_at":185,"delivery_method":114,"recipient_title":19,"reference_number":19,"action_taken_date":186,"medical_device_id":19,"response_letter_date":19},954,[173,174,175,38,158,13,13,13],"\u003Ctime datetime=\"2025-04-22T04:00:00Z\">04\u002F22\u002F2025\u003C\u002Ftime>\n","\u003Ctime datetime=\"2025-04-04T04:00:00Z\">04\u002F04\u002F2025\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Ficu-medical-702535-04042025\">ICU Medical\u003C\u002Fa>","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>VIA UNITED PARCEL SERVICE\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Vivek Jain\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>CEO\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>ICU Medical\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>951 Calle Amanecer\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>San Clemente\u003C\u002Fspan>, \u003Cspan>CA\u003C\u002Fspan> \u003Cspan>92673\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:(b)(6), (b)(7)(C)\"> (b)(6), (b)(7)(C)\u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003Cbr>CMS 702535\u003C\u002Fp>\u003Cp>April 04, 2025\u003C\u002Fp>\u003Cp>Dear Mr. Jain:\u003C\u002Fp>\u003Cp>During an inspection of Smiths Medical ASD (acquired by your firm ICU Medical in January 2022) FEI: 3012307300 located at 6000 Nathan Lane N., Minneapolis, Minnesota on July 23, 2024, through August 9, 2024, investigators from the United States Food and Drug Administration (FDA) determined that your firm manufactures the Medfusion® Model 4000 Syringe Infusion Pump and CADD® Solis VIP Ambulatory Infusion Pump. Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), each of these products is a device because it is an instrument, apparatus, implement, machine, contrivance, implant, in vitro reagent, or other similar or related article, which is intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\u003C\u002Fp>\u003Cp>Our inspection revealed that the Medfusion® Model 4000 Syringe Infusion Pump and CADD® Solis VIP Ambulatory Infusion Pump are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not for these devices have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). These devices are also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not timely notify the agency of its intent to begin the introduction or delivery for introduction into interstate commerce for commercial distribution of the devices, as required by section 510(k) of the Act, 21 U.S.C. § 360(k). For a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the agency. [21 CFR 807.81(b)]. The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at\u003Cbr>http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\u003C\u002Fp>\u003Cp>You currently have clearance, dated August 29, 2011, for a version of the Medfusion® Model 4000 Syringe Infusion Pump which was cleared under K111386 as a Class II device under 21 CFR 880.5725. You also currently have clearance, dated February 1, 2013, for a version of the CADD® Solis VIP Ambulatory Infusion Pump which was cleared under K111275 as a Class II device under 21 CFR 880.5725. However, your firm has failed to submit a premarket notification submission to FDA for significant changes or modifications that could significantly affect the safety or effectiveness of these devices, as required by 21 CFR 807.81(a)(3)(i).\u003C\u002Fp>\u003Cp>In particular, since their last respective clearances, you made multiple changes to the Medfusion® Model 4000 Syringe Infusion Pump and CADD® Solis VIP Ambulatory Infusion Pump that could significantly affect the safety or effectiveness of these devices, including the \u003Cstrong>(b)(4)\u003C\u002Fstrong> for the Medfusion® Model 4000 Syringe Infusion Pump as well as \u003Cstrong>(b)(4)\u003C\u002Fstrong> changes for both the Medfusion® Model 4000 Syringe Infusion Pump and CADD® Solis VIP Ambulatory Infusion Pump. Specifically, these modifications included \u003Cstrong>(b)(4)\u003C\u002Fstrong> changes to address \u003Cstrong>(b)(4)\u003C\u002Fstrong> identified via adverse event reports and \u003Cstrong>(b)(4)\u003C\u002Fstrong> changes to \u003Cstrong>(b)(4)\u003C\u002Fstrong> and \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Such modifications can significantly impact the functionality of the device with respect to the infusion pumps delivery profile, alarm functionality, etc., and affect the device’s risk profile for risks related to under- or over-infusion, delay in therapy, incomplete therapy, or false alarms leading to adverse health effects for patients such as overdose, volume overload, or cardiorespiratory compromise. Your documentation collected during the recent inspection describing the 510(k) risk-benefit analysis for the Medfusion® Model 4000 Syringe Infusion Pump and CADD® Solis VIP Ambulatory Infusion Pump indicates that these changes were implemented after the most recent clearances of the devices as noted above. Further, you have disseminated updated software \u003Cstrong>(b)(4)\u003C\u002Fstrong>, which includes the changes described above, in response to a Class I recall intended to remediate the cause(s) of the recall impacting delivery of fluids, false alarms, therapy interruption, etc. However, you have not yet submitted 510(k)s as required by 21 CFR 807.81(a)(3)(i). Adding a statement to your labeling that the device software has not undergone FDA review is not sufficient.\u003C\u002Fp>\u003Cp>Furthermore, in the regulatory change impact assessment for the Medfusion® Model 4000 Syringe Infusion Pump software update dated April 28, 2023, you identified that a risk-based assessment of the changed device identified new risks or significantly modified risks. Further, you identified that the change either creates or necessitates a new risk control measure or modification of an existing risk control measure for a hazardous situation that could result in significant harm. The changes that you made to the risk control measures in an effort to mitigate the hazards that were the basis for a Class I recall were not submitted to FDA in a required 510(k) even though your own procedure indicates that submission of a 510(k) would be required in this situation. However, you only documented to the file that you had made the change and did not submit the required 510(k).\u003C\u002Fp>\u003Cp>Your firm should take prompt action to address the violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\u003C\u002Fp>\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which should address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\u003Cp>Your firm’s response should be sent to: Melissa Michurski, Assistant Director at CDRHenforcement@fda.hhs.gov. Please include in the subject line, CMS case # 702535 when replying. If you have any questions about the contents of this letter, please contact: Demetria Lueneburg, Compliance Officer at Demetria.Lueneburg@fda.hhs.gov.\u003C\u002Fp>\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility or associated with your firm’s devices. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\u003C\u002Fp>\u003Cp>Sincerely,\u003Cbr>\u002FS\u002F\u003C\u002Fp>\u003Cp>Matthew G. Hillebrenner\u003Cbr>Deputy Director\u003Cbr>Office of Product Evaluation and Quality\u003Cbr>Center for Devices and Radiological Health\u003C\u002Fp>\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVIA UNITED PARCEL SERVICE\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nVivek Jain\n\nRecipient Title\n\nCEO\n\nICU Medical\n\n951 Calle Amanecer\n\nSan Clemente, CA 92673\n\nUnited States\n\n(b)(6), (b)(7)(C)\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nWARNING LETTER\nCMS 702535\nApril 04, 2025\nDear Mr. Jain:\nDuring an inspection of Smiths Medical ASD (acquired by your firm ICU Medical in January 2022) FEI: 3012307300 located at 6000 Nathan Lane N., Minneapolis, Minnesota on July 23, 2024, through August 9, 2024, investigators from the United States Food and Drug Administration (FDA) determined that your firm manufactures the Medfusion® Model 4000 Syringe Infusion Pump and CADD® Solis VIP Ambulatory Infusion Pump. Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), each of these products is a device because it is an instrument, apparatus, implement, machine, contrivance, implant, in vitro reagent, or other similar or related article, which is intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\nOur inspection revealed that the Medfusion® Model 4000 Syringe Infusion Pump and CADD® Solis VIP Ambulatory Infusion Pump are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not for these devices have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). These devices are also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not timely notify the agency of its intent to begin the introduction or delivery for introduction into interstate commerce for commercial distribution of the devices, as required by section 510(k) of the Act, 21 U.S.C. § 360(k). For a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the agency. [21 CFR 807.81(b)]. The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at\nhttp:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\nYou currently have clearance, dated August 29, 2011, for a version of the Medfusion® Model 4000 Syringe Infusion Pump which was cleared under K111386 as a Class II device under 21 CFR 880.5725. You also currently have clearance, dated February 1, 2013, for a version of the CADD® Solis VIP Ambulatory Infusion Pump which was cleared under K111275 as a Class II device under 21 CFR 880.5725. However, your firm has failed to submit a premarket notification submission to FDA for significant changes or modifications that could significantly affect the safety or effectiveness of these devices, as required by 21 CFR 807.81(a)(3)(i).\nIn particular, since their last respective clearances, you made multiple changes to the Medfusion® Model 4000 Syringe Infusion Pump and CADD® Solis VIP Ambulatory Infusion Pump that could significantly affect the safety or effectiveness of these devices, including the (b)(4) for the Medfusion® Model 4000 Syringe Infusion Pump as well as (b)(4) changes for both the Medfusion® Model 4000 Syringe Infusion Pump and CADD® Solis VIP Ambulatory Infusion Pump. Specifically, these modifications included (b)(4) changes to address (b)(4) identified via adverse event reports and (b)(4) changes to (b)(4) and (b)(4). Such modifications can significantly impact the functionality of the device with respect to the infusion pumps delivery profile, alarm functionality, etc., and affect the device’s risk profile for risks related to under- or over-infusion, delay in therapy, incomplete therapy, or false alarms leading to adverse health effects for patients such as overdose, volume overload, or cardiorespiratory compromise. Your documentation collected during the recent inspection describing the 510(k) risk-benefit analysis for the Medfusion® Model 4000 Syringe Infusion Pump and CADD® Solis VIP Ambulatory Infusion Pump indicates that these changes were implemented after the most recent clearances of the devices as noted above. Further, you have disseminated updated software (b)(4), which includes the changes described above, in response to a Class I recall intended to remediate the cause(s) of the recall impacting delivery of fluids, false alarms, therapy interruption, etc. However, you have not yet submitted 510(k)s as required by 21 CFR 807.81(a)(3)(i). Adding a statement to your labeling that the device software has not undergone FDA review is not sufficient.\nFurthermore, in the regulatory change impact assessment for the Medfusion® Model 4000 Syringe Infusion Pump software update dated April 28, 2023, you identified that a risk-based assessment of the changed device identified new risks or significantly modified risks. Further, you identified that the change either creates or necessitates a new risk control measure or modification of an existing risk control measure for a hazardous situation that could result in significant harm. The changes that you made to the risk control measures in an effort to mitigate the hazards that were the basis for a Class I recall were not submitted to FDA in a required 510(k) even though your own procedure indicates that submission of a 510(k) would be required in this situation. However, you only documented to the file that you had made the change and did not submit the required 510(k).\nYour firm should take prompt action to address the violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which should address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration as part of your response.\nYour firm’s response should be sent to: Melissa Michurski, Assistant Director at CDRHenforcement@fda.hhs.gov. Please include in the subject line, CMS case # 702535 when replying. If you have any questions about the contents of this letter, please contact: Demetria Lueneburg, Compliance Officer at Demetria.Lueneburg@fda.hhs.gov.\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility or associated with your firm’s devices. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\nSincerely,\n\u002FS\u002F\nMatthew G. Hillebrenner\nDeputy Director\nOffice of Product Evaluation and Quality\nCenter for Devices and Radiological Health","ICU Medical","icu-medical-702535-04042025","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Ficu-medical-702535-04042025","2026-10-26T08:08:57.251119+00:00","2025-04-22","702535","Vivek Jain","2026-08-19T16:52:11.735+00:00","2025-04-04",{"id":188,"raw":189,"subject":82,"body_html":194,"body_text":195,"firm_name":196,"letter_id":197,"created_at":198,"fei_number":19,"letter_url":199,"updated_at":200,"action_type":22,"case_status":69,"posted_date":201,"marcs_cms_no":202,"product_type":50,"closeout_date":203,"issuing_office":38,"recipient_name":204,"body_fetched_at":205,"delivery_method":93,"recipient_title":19,"reference_number":19,"action_taken_date":206,"medical_device_id":19,"response_letter_date":19},2483,[190,191,192,38,82,13,193,13],"\u003Ctime datetime=\"2022-08-30T13:20:00Z\">08\u002F30\u002F2022\u003C\u002Ftime>\n","\u003Ctime datetime=\"2022-08-03T04:00:00Z\">08\u002F03\u002F2022\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fusa-medical-llc-631500-08032022\">USA Medical LLC\u003C\u002Fa>","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fusa-medical-llc-631500-02062023\">\u003Ctime datetime=\"2023-02-09T05:00:00Z\">02\u002F09\u002F2023\u003C\u002Ftime>\n\u003C\u002Fa>","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>VIA Electronic Mail\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Damon H. Roberts\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>President\u002FOwner\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>USA Medical LLC\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>1220 Texan Trail, Suite 205\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Grapevine\u003C\u002Fspan>, \u003Cspan>TX\u003C\u002Fspan> \u003Cspan>76051-4164\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:damon@USAMedicalllc.com\"> damon@USAMedicalllc.com\u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003Cbr>\nCMS # 631500\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>August 3, 2022\u003C\u002Fp>\n\n\u003Cp>Dear Mr. Roberts:\u003C\u002Fp>\n\n\u003Cp>The United States Food and Drug Administration (FDA) conducted an inspection of your firm’s medical device operations at USA Medical LLC (USA Medical), located at 1220 Texan Trail, Suite 205, Grapevine, TX from February 28 through March 15, 2022. During the inspection, FDA investigators determined that your firm is a medical device manufacturer and distributor of SARS-CoV-2 Antigen Rapid Test kits distributed under the names SARS-COV-2 Antigen Rapid Test, \u003Cstrong>(b)(4)\u003C\u002Fstrong> COVID-19 Ag Rapid Test\u003Csup>\u003Cem>\u003Cstrong>1\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup> (hereafter, collectively referred to as “COVID-19 Tests”). Based on our review, your COVID-19 Tests are intended for use in the mitigation, prevention, treatment, diagnosis, or cure of COVID-19\u003Csup>\u003Cem>\u003Cstrong>2\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup> in people, and thus, are devices under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the “Act”), 21 U.S.C. § 321(h).\u003C\u002Fp>\n\n\u003Cp>Our inspection revealed that the COVID-19 Tests have been distributed in the United States without marketing approval, clearance, or authorization from FDA. Accordingly, these products are adulterated within the meaning of section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have approved applications for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or approved applications for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). These products are also misbranded under section 502(o) of the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C. § 360(k). The introduction or delivery for introduction of these products into interstate commerce is prohibited under section 301(a) of the Act, 21 U.S.C. § 331(a). In addition, it is a prohibited act under section 301(k) of the Act, 21 U.S.C. § 331(k), to do any act with respect to a device while the device is held for sale after shipment in interstate commerce and results in the device being misbranded.\u003C\u002Fp>\n\n\u003Cp>Your products are also misbranded under section 502(a) of the Act, 21 U.S.C. § 352(a), because labeling distributed with these products included statements that the products are authorized for use under an Emergency Use Authorization (EUA). These statements create a false impression that your products have been approved or authorized for emergency use by FDA and are misleading. As discussed above, none of your COVID-19 Test Kits have been approved, cleared, or authorized for emergency use by FDA.\u003C\u002Fp>\n\n\u003Cp>There is currently a global outbreak of respiratory disease caused by a novel coronavirus that has been named “severe acute respiratory syndrome coronavirus 2” (SARS-CoV-2). The disease caused by the virus has been named “Coronavirus Disease 2019” (COVID-19). On January 31, 2020, the Department of Health and Human Services (HHS) issued a declaration of a public health emergency related to COVID-19 and mobilized the Operating Divisions of HHS.\u003Csup>\u003Cem>\u003Cstrong>3\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup> In addition, on March 13, 2020, there was a Presidential declaration of a national emergency in response to COVID-19.\u003Csup>\u003Cem>\u003Cstrong>4\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup> Therefore, FDA is taking urgent measures to protect consumers from certain products that, without approval, clearance, or authorization by FDA, claim to mitigate, prevent, treat, diagnose, or cure COVID-19 in people. As described herein, you have distributed products that are intended for use in mitigation, prevention, treatment, diagnosis, or cure COVID-19 in people. We request that you take immediate action to prevent the distribution of such unapproved, uncleared, and unauthorized products for use in the mitigation, prevention, treatment, diagnosis, or cure of COVID-19.\u003C\u002Fp>\n\n\u003Cp>For more information about FDA’s regulation of devices used to mitigate, prevent, treat, diagnose, or cure COVID-19; frequently asked questions; and other helpful resources, visit our website at&nbsp;\u003Ca href=\"https:\u002F\u002Fwww.fda.gov\u002Fmedical-devices\u002Femergency-situations-medical-devices\u002Fcoronavirus-covid-19-and-medical-devices\">https:\u002F\u002Fwww.fda.gov\u002Fmedical-devices\u002Femergency-situations-medical-devices\u002Fcoronavirus-covid-19-and-medical-devices\u003C\u002Fa>. In addition, the guidance titled “Policy for Coronavirus Disease 2019 Tests During the Public Health Emergency (Revised)”\u003Csup>\u003Cem>\u003Cstrong>5\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup> provides information about FDA’s policies intended to help expand testing capacity by facilitating the development and use of COVID-19 tests during the public health emergency.\u003C\u002Fp>\n\n\u003Cp>Our inspection also revealed that these COVID-19 Tests are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, in manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. We note that you have not responded to the Form FDA 483, List of Inspectional Observations issued to your firm initially on March 15, 2022, and, again in annotated form, on March 17, 2022. These violations include, but are not limited to, the following:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>1. Failure to establish procedures for acceptance activities, as required by 21 CFR § 820.80(a).\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm distributed at least \u003Cstrong>(b)(4)\u003C\u002Fstrong> SARS-CoV-2 Antigen Rapid Test kits from 9\u002F30\u002F2021 – 2\u002F24\u002F2022 without establishing procedures for incoming product and finished device acceptance activities to ensure the device(s) conform to specified requirements and meet acceptance criteria, and acceptance records are maintained.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>2. Failure to establish procedures to control product that does not conform to specified requirements, as required by 21 CFR § 820.90(a).\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm has not established procedures to ensure that nonconforming product is identified, documented, evaluated, segregated, and dispositioned. As you repackage and relabel tests and you do not have an authorized Emergency Use Authorization for those products, you do not have procedures regarding these nonconforming products.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>3. Failure to establish procedures for control and distribution of finished devices, as required by 21 CFR § 820.160(a).\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm has not established and maintained procedures for the control and distribution of your SARS-CoV-2 Antigen Rapid Qualitative Test system to ensure only devices approved for release are distributed, and that purchase orders are reviewed to ensure that ambiguities and errors are resolved before devices are released for distribution. You distributed more than \u003Cstrong>(b)(4)\u003C\u002Fstrong> test kits from 9\u002F30\u002F2021 - 2\u002F24\u002F2022 to customers in the United States and did not review and approve the products prior to release\u002Fdistribution.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>4. Failure to establish procedures to ensure that all purchased or otherwise received product and services conform to specified requirements, as required by 21 CFR § 820.50.\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm has not established procedures for evaluation of suppliers, including the quality requirements that must be met by suppliers, to ensure that received products and services conform to specified requirements. The firm did not evaluate the manufacturers of the SARS-CoV-2 Antigen Rapid Test kits based on their ability to meet specified requirements, including quality requirements.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>5. Failure to establish procedures for corrective and preventative action, as required by 21 CFR § 820.100(a).\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm has not established procedures for implementing and documenting corrective and preventive action, including requirements for: 1) analyzing quality data sources; 2) investigating the cause of nonconformities; 3) identifying the actions needed to prevent occurrence or recurrence of nonconformities; 4) ensuring actions implemented are effective; 5) documenting changes in methods and procedures; 6) disseminating information related to quality problems to appropriate individuals; and 7) submitting relevant information on quality problems for management review.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>6. Failure to establish procedures for receiving, reviewing, and evaluating complaints by a formally designated unit, as required by 21 CFR § 820.198(a).\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm has not established procedures for complaint handling and documentation to ensure that complaints are: 1) processed in a uniform and timely manner, 2) oral complaints are documented upon receipt, 3) complaints are evaluated to determine if the reported event is required to be submitted to the FDA as a Medical Device Report.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>7. Failure to establish procedures to control environmental conditions as required by 21 CFR § 820.70(c).\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm has not established procedures to control environmental conditions to ensure that the SARS-CoV-2 Antigen Rapid Test products (raw materials and finished devices) are stored within the required temperature range(s) and monitored to ensure that any deviations are noted and addressed. Your firm was found to be storing test kits in its loading dock and administrative areas without procedures\u002Frequirements\u002Fmonitoring. The \u003Cstrong>(b)(4)\u003C\u002Fstrong> kit has defined storage requirements.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>8. Failure to establish and maintain adequate procedures to ensure that mix-ups, damage, deterioration, contamination, or other adverse effects to product do not occur during handling as required by 21 CFR § 820.140.\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Specifically, \u003Cstrong>(b)(4)\u003C\u002Fstrong> boxes containing \u003Cstrong>(b)(4)\u003C\u002Fstrong> Diagnostic Kit SARS-CoV-2 Antigen Rapid Test kits (no batch\u002Flot number identification) of products returned on 2\u002F16\u002F2022 in the common administrative area were observed that had not been identified, documented, or segregated as returned product.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>9. Failure to establish procedures for quality audits as required by 21 CFR § 820.22.\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm has not established procedures for quality audits to ensure that the quality system complies with the quality system requirements and to determine the effectiveness of the quality system. Quality audits have not been performed since the firm began to distribute SARS-CoV-2 Antigen Rapid Test kits in approximately March 2020.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>10. Failure to establish procedures for management review as required by 21 CFR § 820.20(c).\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm has not established procedures for management review of the suitability and effectiveness of the quality system. Management reviews have not been conducted since the firm began to distribute SARS-CoV-2 Antigen Rapid Test kits in approximately March 2020.\u003Cbr>\n\u003Cbr>\n\u003Cstrong>11. Failure to establish procedures for training and identifying training needs as required by 21 CFR § 820.25(b).\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm has not established training procedures to identify training needs and to ensure that all personnel are trained to adequately perform their responsibilities. Training records are not maintained.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>12. Failure to establish a policy, and objectives for, and commitment to, quality as required by 21 CFR § 820.20(a).\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Specifically, your Management with executive responsibility has not established it policy and objectives for, and commitment to, quality.\u003C\u002Fp>\n\n\u003Cp>Our inspection also revealed that your COVID-19 Tests are misbranded under Section 502(t)(2) of the Act, 21 U.S.C. § 352(t)(2), in that your firm failed or refused to furnish material or information regarding the device that is required by or under Section 519 of the Act, 21 U.S.C. § 360i, and 21 CFR Part 803 – Medical Device Reporting.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>Failure to develop, maintain, and implement written Medical Device Reporting (MDR) procedures, as required by 21 CFR 803.17.\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm has not established procedures for timely and effective identification, communication, and evaluation of reportable events; a standardized review process for determining when an event meets reportability criteria; timely submission of MDRs to the FDA; or for compliance with the applicable documentation and recordkeeping requirements.\u003C\u002Fp>\n\n\u003Cp>Your firm should take prompt action to address any violations. Other federal agencies may take your compliance history into account when considering the award of contracts. Should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices such devices will not be approved until the violations have been corrected. Should FDA determine that your devices do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted. More information on processes for persons denied a CFG can be found at: \u003Ca href=\"https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fprocess-requestreview-%20fdas-decision-not-issue-certain-export-certificates-devices\">https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fprocess-requestreview-fdas-decision-not-issue-certain-export-certificates-devices\u003C\u002Fa>.\u003C\u002Fp>\n\n\u003Cp>Note, there are two response time frames specified. You should take immediate action to address any violations relating to your firm’s sale or distribution of the COVID-19 Test Kits and to prevent future violations. We advise you to review your websites, product labels, and other labeling and promotional materials to ensure that you are not misleadingly representing your products as safe and\u002For effective for a COVID-19 related use for which they have not been approved, cleared, or authorized by FDA and that you do not make claims that adulterate or misbrand the products in violation of the Act. \u003Cstrong>Within 48 hours, please send an email to COVID-19-Task-Force-CDRH@fda.hhs.gov\u003C\u002Fstrong> describing the specific steps you have taken to address any violations. Include an explanation of each step being taken to prevent the recurrence of any violations, as well as copies of related documentation. If you cannot take action to address this matter completely within 48 hours, state the reason for the delay and the time within which you will do so.\u003C\u002Fp>\n\n\u003Cp>FDA is advising consumers not to purchase or use certain products that are not in compliance with FDA requirements and are being misleadingly represented as safe and\u002For effective for the mitigation, prevention, treatment, diagnosis, or cure of COVID-19. Your firm will be added to a published list on FDA's website of firms and websites that have received warning letters from FDA concerning the sale or distribution of COVID-19 related products in violation of the Act. This list can be found at&nbsp;\u003Ca href=\"https:\u002F\u002Fwww.fda.gov\u002Fconsumers\u002Fhealth-fraud-scams\u002Ffraudulent-coronavirus-disease-2019-covid-19-products\">https:\u002F\u002Fwww.fda.gov\u002Fconsumers\u002Fhealth-fraud-scams\u002Ffraudulent-coronavirus-disease-2019-covid-19-products\u003C\u002Fa>. Once you have taken actions to address the sale of your unapproved, uncleared, and unauthorized products for the mitigation, prevention, treatment, diagnosis, or cure of COVID-19, and any appropriate actions have been confirmed by the FDA, the published list will be updated to indicate that your firm has taken such corrective actions.\u003C\u002Fp>\n\n\u003Cp>Please also notify FDA in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the concerns noted in this letter related to Quality Systems and MDR reporting. Include documentation of any corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If any corrections and\u002For corrective actions your firm plans to take will require more time, please include a timetable for implementation of those activities. If any corrections and\u002For corrective actions your firm plans to take cannot be completed within fifteen business days, state the reason for requiring additional time and the time within which these activities will be completed. We will communicate with you regarding your firm’s response(s) and any need to re-inspect your firm’s facility to verify that any appropriate corrections have been made and\u002For corrective actions have been taken.\u003C\u002Fp>\n\n\u003Cp>This response should be sent to: US Food and Drug Administration, Division 3\u002FWest, Office of Medical Device and Radiological Health Operations at oradevices3firmresponse@fda.hhs.gov. Please identify your response with CMS Case # 631500.\u003C\u002Fp>\n\n\u003Cp>If you have questions about the contents of this letter, please contact Compliance Officer Raymond W. Brullo at 949-608-2918, or via email at raymond.brullo@fda.hhs.gov\u003C\u002Fp>\n\n\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of any deficiencies at your firm’s facility or associated with your firm’s devices. This letter notifies you of our concerns and provides you with an opportunity to address them. If you believe that your products are not in violation of the Act, please provide us with your reasoning and any supporting information for our consideration. It is your firm’s responsibility to ensure that the products you sell are in compliance with the Act and FDA’s implementing regulations. Failure to adequately address the matters discussed in this letter may result in legal action, including without limitation, seizure, and injunction. The specific concerns noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be indicative of, or in addition to, other issues with your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any deficiencies and take prompt actions to correct any violations and bring your products into compliance.\u003C\u002Fp>\n\n\u003Cp>Sincerely,\u003Cbr>\n\u002FS\u002F\u003Cbr>\nTimothy T. Stenzel, M.D., Ph.D. Director\u003Cbr>\nOHT7: Office of In Vitro Diagnostics\u003Cbr>\nOffice of Product Evaluation and Quality\u003Cbr>\nCenter for Devices and Radiological Health\u003C\u002Fp>\n\n\u003Cp>\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>Shari J. Shambaugh\u003Cbr>\nProgram Division Director\u003Cbr>\nOffice of Medical Device and Radiological Health\u003Cbr>\nDivision 3\u003Cbr>\nOffice of Regulatory Affairs\u003C\u002Fp>\n\n\u003Cp>___________________________\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>1\u003C\u002Fstrong>\u003C\u002Fem> The “\u003Cstrong>(b)(4)\u003C\u002Fstrong> COVID‐19 Ag Rapid Test” distributed by your firm appears to be the \u003Cstrong>(b)(4)\u003C\u002Fstrong> COVID‐19 Ag Rapid Test manufactured by \u003Cstrong>(b)(4)\u003C\u002Fstrong>. On \u003Cstrong>(b)(4)\u003C\u002Fstrong>, FDA reissued an Emergency Use Authorization (EUA) pursuant to section 564 of the Act, 21 U.S.C § 360bbb‐3, to permit emergency use of \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>COVID‐19 Ag Rapid Test. The test is indicated for use by laboratories certified under the Clinical Laboratory Improvement Amendments of 1988 (CLIA), 42 U.S.C. § 263a, that meet the requirements to perform high complexity, moderate complexity, or waived tests and in patient care settings operating under a CLIA Certificate of Waiver, Certificate of Compliance, or Certificate of Accreditation. However, the EUA does not authorize the distribution of the \u003Cstrong>(b)(4)\u003C\u002Fstrong> COVID‐19 Rapid Test for use outside of these specified settings.\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>2\u003C\u002Fstrong>\u003C\u002Fem> As explained below, there is currently an outbreak of a respiratory disease named “Coronavirus Disease 2019” (COVID‐19).\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>3\u003C\u002Fstrong>\u003C\u002Fem> Secretary of Health and Human Services, Determination that a Public Health Emergency Exists (originally issued Jan. 31, 2020, and subsequently renewed), available at \u003Ca href=\"https:\u002F\u002Fwww.phe.gov\u002Femergency\u002Fnews\u002Fhealthactions\u002Fphe\u002FPages\u002Fdefault.aspx\">https:\u002F\u002Fwww.phe.gov\u002Femergency\u002Fnews\u002Fhealthactions\u002Fphe\u002FPages\u002Fdefault.aspx\u003C\u002Fa>.\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>4\u003C\u002Fstrong>\u003C\u002Fem> Proclamation on Declaring a National Emergency Concerning the Novel Coronavirus Disease (COVID‐19) Outbreak (Mar. 13, 2020), available at \u003Ca href=\"https:\u002F\u002Ftrumpwhitehouse.archives.gov\u002Fpresidential%E2%80%90actions\u002Fproclamation%E2%80%90declaring%E2%80%90national%E2%80%90%20emergency-concerning%E2%80%90novel%E2%80%90coronavirus%E2%80%90disease%E2%80%90covid%E2%80%9019%E2%80%90outbreak\u002F\">https:\u002F\u002Ftrumpwhitehouse.archives.gov\u002Fpresidential‐actions\u002Fproclamation‐declaring‐national‐ emergency-concerning‐novel‐coronavirus‐disease‐covid‐19‐outbreak\u002F\u003C\u002Fa>.\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>5\u003C\u002Fstrong>\u003C\u002Fem> Accessible at \u003Ca href=\"https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F135659\u002Fdownload\">https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F135659\u002Fdownload\u003C\u002Fa>.\u003C\u002Fp>\n\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVIA Electronic Mail\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nDamon H. Roberts\n\nRecipient Title\n\nPresident\u002FOwner\n\nUSA Medical LLC\n\n1220 Texan Trail, Suite 205\n\nGrapevine, TX 76051-4164\n\nUnited States\n\ndamon@USAMedicalllc.com\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nWARNING LETTER\n\nCMS # 631500\n\nAugust 3, 2022\n\nDear Mr. Roberts:\n\nThe United States Food and Drug Administration (FDA) conducted an inspection of your firm’s medical device operations at USA Medical LLC (USA Medical), located at 1220 Texan Trail, Suite 205, Grapevine, TX from February 28 through March 15, 2022. During the inspection, FDA investigators determined that your firm is a medical device manufacturer and distributor of SARS-CoV-2 Antigen Rapid Test kits distributed under the names SARS-COV-2 Antigen Rapid Test, (b)(4) COVID-19 Ag Rapid Test1 (hereafter, collectively referred to as “COVID-19 Tests”). Based on our review, your COVID-19 Tests are intended for use in the mitigation, prevention, treatment, diagnosis, or cure of COVID-192 in people, and thus, are devices under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the “Act”), 21 U.S.C. § 321(h).\n\nOur inspection revealed that the COVID-19 Tests have been distributed in the United States without marketing approval, clearance, or authorization from FDA. Accordingly, these products are adulterated within the meaning of section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have approved applications for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or approved applications for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). These products are also misbranded under section 502(o) of the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C. § 360(k). The introduction or delivery for introduction of these products into interstate commerce is prohibited under section 301(a) of the Act, 21 U.S.C. § 331(a). In addition, it is a prohibited act under section 301(k) of the Act, 21 U.S.C. § 331(k), to do any act with respect to a device while the device is held for sale after shipment in interstate commerce and results in the device being misbranded.\n\nYour products are also misbranded under section 502(a) of the Act, 21 U.S.C. § 352(a), because labeling distributed with these products included statements that the products are authorized for use under an Emergency Use Authorization (EUA). These statements create a false impression that your products have been approved or authorized for emergency use by FDA and are misleading. As discussed above, none of your COVID-19 Test Kits have been approved, cleared, or authorized for emergency use by FDA.\n\nThere is currently a global outbreak of respiratory disease caused by a novel coronavirus that has been named “severe acute respiratory syndrome coronavirus 2” (SARS-CoV-2). The disease caused by the virus has been named “Coronavirus Disease 2019” (COVID-19). On January 31, 2020, the Department of Health and Human Services (HHS) issued a declaration of a public health emergency related to COVID-19 and mobilized the Operating Divisions of HHS.3 In addition, on March 13, 2020, there was a Presidential declaration of a national emergency in response to COVID-19.4 Therefore, FDA is taking urgent measures to protect consumers from certain products that, without approval, clearance, or authorization by FDA, claim to mitigate, prevent, treat, diagnose, or cure COVID-19 in people. As described herein, you have distributed products that are intended for use in mitigation, prevention, treatment, diagnosis, or cure COVID-19 in people. We request that you take immediate action to prevent the distribution of such unapproved, uncleared, and unauthorized products for use in the mitigation, prevention, treatment, diagnosis, or cure of COVID-19.\n\nFor more information about FDA’s regulation of devices used to mitigate, prevent, treat, diagnose, or cure COVID-19; frequently asked questions; and other helpful resources, visit our website at https:\u002F\u002Fwww.fda.gov\u002Fmedical-devices\u002Femergency-situations-medical-devices\u002Fcoronavirus-covid-19-and-medical-devices. In addition, the guidance titled “Policy for Coronavirus Disease 2019 Tests During the Public Health Emergency (Revised)”5 provides information about FDA’s policies intended to help expand testing capacity by facilitating the development and use of COVID-19 tests during the public health emergency.\n\nOur inspection also revealed that these COVID-19 Tests are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, in manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. We note that you have not responded to the Form FDA 483, List of Inspectional Observations issued to your firm initially on March 15, 2022, and, again in annotated form, on March 17, 2022. These violations include, but are not limited to, the following:\n\n1. Failure to establish procedures for acceptance activities, as required by 21 CFR § 820.80(a).\n\nSpecifically, your firm distributed at least (b)(4) SARS-CoV-2 Antigen Rapid Test kits from 9\u002F30\u002F2021 – 2\u002F24\u002F2022 without establishing procedures for incoming product and finished device acceptance activities to ensure the device(s) conform to specified requirements and meet acceptance criteria, and acceptance records are maintained.\n\n2. Failure to establish procedures to control product that does not conform to specified requirements, as required by 21 CFR § 820.90(a).\n\nSpecifically, your firm has not established procedures to ensure that nonconforming product is identified, documented, evaluated, segregated, and dispositioned. As you repackage and relabel tests and you do not have an authorized Emergency Use Authorization for those products, you do not have procedures regarding these nonconforming products.\n\n3. Failure to establish procedures for control and distribution of finished devices, as required by 21 CFR § 820.160(a).\n\nSpecifically, your firm has not established and maintained procedures for the control and distribution of your SARS-CoV-2 Antigen Rapid Qualitative Test system to ensure only devices approved for release are distributed, and that purchase orders are reviewed to ensure that ambiguities and errors are resolved before devices are released for distribution. You distributed more than (b)(4) test kits from 9\u002F30\u002F2021 - 2\u002F24\u002F2022 to customers in the United States and did not review and approve the products prior to release\u002Fdistribution.\n\n4. Failure to establish procedures to ensure that all purchased or otherwise received product and services conform to specified requirements, as required by 21 CFR § 820.50.\n\nSpecifically, your firm has not established procedures for evaluation of suppliers, including the quality requirements that must be met by suppliers, to ensure that received products and services conform to specified requirements. The firm did not evaluate the manufacturers of the SARS-CoV-2 Antigen Rapid Test kits based on their ability to meet specified requirements, including quality requirements.\n\n5. Failure to establish procedures for corrective and preventative action, as required by 21 CFR § 820.100(a).\n\nSpecifically, your firm has not established procedures for implementing and documenting corrective and preventive action, including requirements for: 1) analyzing quality data sources; 2) investigating the cause of nonconformities; 3) identifying the actions needed to prevent occurrence or recurrence of nonconformities; 4) ensuring actions implemented are effective; 5) documenting changes in methods and procedures; 6) disseminating information related to quality problems to appropriate individuals; and 7) submitting relevant information on quality problems for management review.\n\n6. Failure to establish procedures for receiving, reviewing, and evaluating complaints by a formally designated unit, as required by 21 CFR § 820.198(a).\n\nSpecifically, your firm has not established procedures for complaint handling and documentation to ensure that complaints are: 1) processed in a uniform and timely manner, 2) oral complaints are documented upon receipt, 3) complaints are evaluated to determine if the reported event is required to be submitted to the FDA as a Medical Device Report.\n\n7. Failure to establish procedures to control environmental conditions as required by 21 CFR § 820.70(c).\n\nSpecifically, your firm has not established procedures to control environmental conditions to ensure that the SARS-CoV-2 Antigen Rapid Test products (raw materials and finished devices) are stored within the required temperature range(s) and monitored to ensure that any deviations are noted and addressed. Your firm was found to be storing test kits in its loading dock and administrative areas without procedures\u002Frequirements\u002Fmonitoring. The (b)(4) kit has defined storage requirements.\n\n8. Failure to establish and maintain adequate procedures to ensure that mix-ups, damage, deterioration, contamination, or other adverse effects to product do not occur during handling as required by 21 CFR § 820.140.\n\nSpecifically, (b)(4) boxes containing (b)(4) Diagnostic Kit SARS-CoV-2 Antigen Rapid Test kits (no batch\u002Flot number identification) of products returned on 2\u002F16\u002F2022 in the common administrative area were observed that had not been identified, documented, or segregated as returned product.\n\n9. Failure to establish procedures for quality audits as required by 21 CFR § 820.22.\n\nSpecifically, your firm has not established procedures for quality audits to ensure that the quality system complies with the quality system requirements and to determine the effectiveness of the quality system. Quality audits have not been performed since the firm began to distribute SARS-CoV-2 Antigen Rapid Test kits in approximately March 2020.\n\n10. Failure to establish procedures for management review as required by 21 CFR § 820.20(c).\n\nSpecifically, your firm has not established procedures for management review of the suitability and effectiveness of the quality system. Management reviews have not been conducted since the firm began to distribute SARS-CoV-2 Antigen Rapid Test kits in approximately March 2020.\n\n11. Failure to establish procedures for training and identifying training needs as required by 21 CFR § 820.25(b).\n\nSpecifically, your firm has not established training procedures to identify training needs and to ensure that all personnel are trained to adequately perform their responsibilities. Training records are not maintained.\n\n12. Failure to establish a policy, and objectives for, and commitment to, quality as required by 21 CFR § 820.20(a).\n\nSpecifically, your Management with executive responsibility has not established it policy and objectives for, and commitment to, quality.\n\nOur inspection also revealed that your COVID-19 Tests are misbranded under Section 502(t)(2) of the Act, 21 U.S.C. § 352(t)(2), in that your firm failed or refused to furnish material or information regarding the device that is required by or under Section 519 of the Act, 21 U.S.C. § 360i, and 21 CFR Part 803 – Medical Device Reporting.\n\nFailure to develop, maintain, and implement written Medical Device Reporting (MDR) procedures, as required by 21 CFR 803.17.\n\nSpecifically, your firm has not established procedures for timely and effective identification, communication, and evaluation of reportable events; a standardized review process for determining when an event meets reportability criteria; timely submission of MDRs to the FDA; or for compliance with the applicable documentation and recordkeeping requirements.\n\nYour firm should take prompt action to address any violations. Other federal agencies may take your compliance history into account when considering the award of contracts. Should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices such devices will not be approved until the violations have been corrected. Should FDA determine that your devices do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted. More information on processes for persons denied a CFG can be found at: https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fprocess-requestreview-fdas-decision-not-issue-certain-export-certificates-devices.\n\nNote, there are two response time frames specified. You should take immediate action to address any violations relating to your firm’s sale or distribution of the COVID-19 Test Kits and to prevent future violations. We advise you to review your websites, product labels, and other labeling and promotional materials to ensure that you are not misleadingly representing your products as safe and\u002For effective for a COVID-19 related use for which they have not been approved, cleared, or authorized by FDA and that you do not make claims that adulterate or misbrand the products in violation of the Act. Within 48 hours, please send an email to COVID-19-Task-Force-CDRH@fda.hhs.gov describing the specific steps you have taken to address any violations. Include an explanation of each step being taken to prevent the recurrence of any violations, as well as copies of related documentation. If you cannot take action to address this matter completely within 48 hours, state the reason for the delay and the time within which you will do so.\n\nFDA is advising consumers not to purchase or use certain products that are not in compliance with FDA requirements and are being misleadingly represented as safe and\u002For effective for the mitigation, prevention, treatment, diagnosis, or cure of COVID-19. Your firm will be added to a published list on FDA's website of firms and websites that have received warning letters from FDA concerning the sale or distribution of COVID-19 related products in violation of the Act. This list can be found at https:\u002F\u002Fwww.fda.gov\u002Fconsumers\u002Fhealth-fraud-scams\u002Ffraudulent-coronavirus-disease-2019-covid-19-products. Once you have taken actions to address the sale of your unapproved, uncleared, and unauthorized products for the mitigation, prevention, treatment, diagnosis, or cure of COVID-19, and any appropriate actions have been confirmed by the FDA, the published list will be updated to indicate that your firm has taken such corrective actions.\n\nPlease also notify FDA in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the concerns noted in this letter related to Quality Systems and MDR reporting. Include documentation of any corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If any corrections and\u002For corrective actions your firm plans to take will require more time, please include a timetable for implementation of those activities. If any corrections and\u002For corrective actions your firm plans to take cannot be completed within fifteen business days, state the reason for requiring additional time and the time within which these activities will be completed. We will communicate with you regarding your firm’s response(s) and any need to re-inspect your firm’s facility to verify that any appropriate corrections have been made and\u002For corrective actions have been taken.\n\nThis response should be sent to: US Food and Drug Administration, Division 3\u002FWest, Office of Medical Device and Radiological Health Operations at oradevices3firmresponse@fda.hhs.gov. Please identify your response with CMS Case # 631500.\n\nIf you have questions about the contents of this letter, please contact Compliance Officer Raymond W. Brullo at 949-608-2918, or via email at raymond.brullo@fda.hhs.gov\n\nFinally, you should know that this letter is not intended to be an all-inclusive list of any deficiencies at your firm’s facility or associated with your firm’s devices. This letter notifies you of our concerns and provides you with an opportunity to address them. If you believe that your products are not in violation of the Act, please provide us with your reasoning and any supporting information for our consideration. It is your firm’s responsibility to ensure that the products you sell are in compliance with the Act and FDA’s implementing regulations. Failure to adequately address the matters discussed in this letter may result in legal action, including without limitation, seizure, and injunction. The specific concerns noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be indicative of, or in addition to, other issues with your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any deficiencies and take prompt actions to correct any violations and bring your products into compliance.\n\nSincerely,\n\n\u002FS\u002F\n\nTimothy T. Stenzel, M.D., Ph.D. Director\n\nOHT7: Office of In Vitro Diagnostics\n\nOffice of Product Evaluation and Quality\n\nCenter for Devices and Radiological Health\n\n\u002FS\u002F\n\nShari J. Shambaugh\n\nProgram Division Director\n\nOffice of Medical Device and Radiological Health\n\nDivision 3\n\nOffice of Regulatory Affairs\n\n___________________________\n\n1 The “(b)(4) COVID‐19 Ag Rapid Test” distributed by your firm appears to be the (b)(4) COVID‐19 Ag Rapid Test manufactured by (b)(4). On (b)(4), FDA reissued an Emergency Use Authorization (EUA) pursuant to section 564 of the Act, 21 U.S.C § 360bbb‐3, to permit emergency use of (b)(4) COVID‐19 Ag Rapid Test. The test is indicated for use by laboratories certified under the Clinical Laboratory Improvement Amendments of 1988 (CLIA), 42 U.S.C. § 263a, that meet the requirements to perform high complexity, moderate complexity, or waived tests and in patient care settings operating under a CLIA Certificate of Waiver, Certificate of Compliance, or Certificate of Accreditation. However, the EUA does not authorize the distribution of the (b)(4) COVID‐19 Rapid Test for use outside of these specified settings.\n\n2 As explained below, there is currently an outbreak of a respiratory disease named “Coronavirus Disease 2019” (COVID‐19).\n\n3 Secretary of Health and Human Services, Determination that a Public Health Emergency Exists (originally issued Jan. 31, 2020, and subsequently renewed), available at https:\u002F\u002Fwww.phe.gov\u002Femergency\u002Fnews\u002Fhealthactions\u002Fphe\u002FPages\u002Fdefault.aspx.\n\n4 Proclamation on Declaring a National Emergency Concerning the Novel Coronavirus Disease (COVID‐19) Outbreak (Mar. 13, 2020), available at https:\u002F\u002Ftrumpwhitehouse.archives.gov\u002Fpresidential‐actions\u002Fproclamation‐declaring‐national‐ emergency-concerning‐novel‐coronavirus‐disease‐covid‐19‐outbreak\u002F.\n\n5 Accessible at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F135659\u002Fdownload.","USA Medical LLC","usa-medical-llc-631500-08032022","2026-08-18T06:42:29.145918+00:00","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fusa-medical-llc-631500-08032022","2026-10-26T08:10:18.402099+00:00","2022-08-30","631500","2023-02-09","Damon H. Roberts","2026-08-20T01:37:57.067+00:00","2022-08-03",10,{"510k":209,"classification":210,"enforcement":211,"event":212,"event_backfill":213,"pma":214,"warning_letter":215},"2026-11-16T02:00:55.89+00:00","2026-11-16T02:00:41.999+00:00","2026-11-16T02:00:49.415+00:00","2026-11-17T04:00:34.414+00:00","2026-09-07T05:17:28.839+00:00","2026-11-16T02:01:03.155+00:00","2026-11-17T01:02:55.859+00:00"]