[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"fda-warning-letters-search:[\"Abbott Medical Optics Inc (AMO)\",\"\",\"\",\"\",\"\",1]":3,"fda-latest-sync-dates":55},{"warningLetters":4,"total":54},[5,32],{"id":6,"raw":7,"subject":12,"body_html":14,"body_text":15,"firm_name":16,"letter_id":17,"created_at":18,"fei_number":19,"letter_url":20,"updated_at":21,"action_type":22,"case_status":23,"posted_date":24,"marcs_cms_no":25,"product_type":26,"closeout_date":19,"issuing_office":11,"recipient_name":27,"body_fetched_at":28,"delivery_method":29,"recipient_title":19,"reference_number":30,"action_taken_date":31,"medical_device_id":19,"response_letter_date":19},735,[8,9,10,11,12,13,13,13],"\u003Ctime datetime=\"2025-08-05T04:00:00Z\">08\u002F05\u002F2025\u003C\u002Ftime>\n","\u003Ctime datetime=\"2025-07-15T04:00:00Z\">07\u002F15\u002F2025\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Foasis-medical-inc-707198-07152025\">Oasis Medical, Inc.\u003C\u002Fa>","Center for Drug Evaluation and Research (CDER)","CGMP\u002FFinished Pharmaceuticals\u002FAdulterated","","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>Via Email\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n              \u003Cdt>Reference #:\u003C\u002Fdt> \n        \u003Cdd>320-25-93\u003C\u002Fdd>\n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Drugs                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Mr. Norman Craig Delgado\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>President and CEO\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Oasis Medical, Inc.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>514 S. Vermont Avenue\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Glendora\u003C\u002Fspan>, \u003Cspan>CA\u003C\u002Fspan> \u003Cspan>91741\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Drug Evaluation and Research (CDER)\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>Warning Letter\u003C\u002Fstrong> 320-25-93\u003C\u002Fp>\u003Cp>July 15, 2025\u003C\u002Fp>\u003Cp>Dear Mr. Delgado:\u003C\u002Fp>\u003Cp>The United States Food and Drug Administration (FDA) inspected your drug manufacturing facilities, Oasis Medical, Inc., FEI 2083373, at 514 S. Vermont Avenue, Glendora, from January 15 to 27, 2025.\u003C\u002Fp>\u003Cp>This warning letter summarizes significant violations of Current Good Manufacturing Practice (CGMP) regulations for finished pharmaceuticals. See Title 21 Code of Federal Regulations (CFR), parts 210 and 211 (21 CFR parts 210 and 211).\u003C\u002Fp>\u003Cp>Because your methods, facilities, or controls for manufacturing, processing, packing, or holding do not conform to CGMP, your drug products are adulterated within the meaning of section 501(a)(2)(B) of the Federal Food, Drug, and Cosmetic Act (FD&amp;C Act), 21 U.S.C. 351(a)(2)(B).\u003C\u002Fp>\u003Cp>We reviewed your February 17, 2025 response to our Form FDA 483 in detail and acknowledge receipt of your subsequent correspondence.\u003C\u002Fp>\u003Cp>During our inspection, our investigators observed specific violations including, but not limited to, the following.\u003C\u002Fp>\u003Cp>\u003Cstrong>1. Your firm failed to establish adequate written procedures for production and process control designed to assure that the drug products you manufacture have the identity, strength, quality, and purity they purport or are represented to possess (21 CFR 211.100(a)).\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Your firm failed to ensure the use of reproducible manufacturing processes for the production of sterile ophthalmic drug products. You also lacked an ongoing program to establish stable manufacturing operations, monitor ongoing process control, and provide for consistent drug quality. For example,\u003C\u002Fp>\u003Cul>\u003Cli>Your process lacked adequate control and is prone to producing an excessive number of defective units. A substantial portion of batches have been rejected, including total reject levels \u003Cstrong>(b)(4)\u003C\u002Fstrong> in a number of cases. Of special concern are the excessive number of defective products due to visible particulate contamination (e.g., recurring instances of levels greater than \u003Cstrong>(b)(4)\u003C\u002Fstrong>). Batches with very high defect levels were nonetheless distributed.\u003C\u002Fli>\u003Cli>You failed to establish and follow an adequate visual inspection program for the ophthalmic drugs manufactured by your firm.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>There was no classification as to the severity of the defects (i.e., critical, major, minor) or limit for the number of defects allowed, if any.\u003C\u002Fp>\u003Cul>\u003Cli>The most recently completed requalification study for your \u003Cstrong>(b)(4)\u003C\u002Fstrong> cycle was conducted in 2023 and inadequately considered potential changes from previous qualifications and the original validation. The 2023 requalification did not include an assessment of \u003Cstrong>(b)(4)\u003C\u002Fstrong> maintenance or changes to the drug product components.\u003C\u002Fli>\u003Cli>The maximum duration of the hold steps in your manufacturing process (e.g., extensive hold times prior to \u003Cstrong>(b)(4)\u003C\u002Fstrong>) has not been validated.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Your response fails to address your lack of process capability, and the overreliance on visual inspection in an attempt to remove excessive defective units from batches.\u003C\u002Fp>\u003Cp>You do not commit to thoroughly investigate the root causes of the visible particulates and excessive occurrence of these critical defects. You also lack appropriate interim steps to prevent production of further batches from a low capability process while you make efforts to remediate it. In addition, the response lacks a commitment to address potentially contaminated products in distribution.\u003C\u002Fp>\u003Cp>Regarding the visual inspection program, your response lacks a commitment to perform a comprehensive reassessment of this program.\u003C\u002Fp>\u003Cp>Regarding production hold times, your response acknowledges that you have not performed validation of your hold steps. But you do not commit to validating all in-process hold times and include a date by which these studies will be completed.\u003C\u002Fp>\u003Cp>Process validation evaluates the soundness of design and state of control of a process through its lifecycle. Each significant stage of a manufacturing process must be designed appropriately to ensure the quality of raw material inputs, materials, and finished drugs. Process qualification studies determine whether an initial state of control has been established. Successful process qualification studies are necessary before commercial distribution. Thereafter, ongoing vigilant oversight of process performance and product quality are necessary to ensure you maintain a stable manufacturing operation throughout the product lifecycle.\u003C\u002Fp>\u003Cp>See FDA’s guidance document \u003Cem>Process Validation: General Principles and Practices\u003C\u002Fem> for general principles and approaches that FDA considers appropriate elements of process validation, at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F71021\u002Fdownload.\u003C\u002Fp>\u003Cp>In response to this letter, provide:\u003C\u002Fp>\u003Cul>\u003Cli>A detailed retrospective review and assessment of your \u003Cstrong>(b)(4)\u003C\u002Fstrong> program. The retrospective review and assessment should include all changes to the drug product, container closure system, and packaging (e.g., canula sheath); and an evaluation of changes to, and maintenance of, the \u003Cstrong>(b)(4)\u003C\u002Fstrong> equipment. If changes are identified, provide your plan to evaluate the safety and quality of distributed finished products that remain within expiry and a plan to ensure the safety and quality of your drug products until the \u003Cstrong>(b)(4)\u003C\u002Fstrong> process is successfully validated.\u003C\u002Fli>\u003Cli>Thorough investigation(s), including corrective actions and preventive actions (CAPA), regarding finished product batches manufactured and released for distribution despite high numbers of rejected units.\u003C\u002Fli>\u003Cli>Complete results of your examination of retains\u002Freserve samples for all batches from January 2023 to present for defects, and any related investigation(s) and corrective actions.\u003C\u002Fli>\u003Cli>A list of all batches since January 1, 2023, to present, with the following information:\u003Cbr>o Product name\u003Cbr>o Batch number\u003Cbr>o Date of manufacture\u003Cbr>o Date of expiration\u003Cbr>o Batch size (original quantity of theoretical syringes)\u003Cbr>o Actual batch yield (number of pouched syringe units)\u003Cbr>o Number of rejects due to particulates\u003Cbr>o Number of rejects due to other defects (include the top 3 other defect types for each batch, beyond particulate defects)\u003Cbr>o Percent yield\u003C\u002Fli>\u003Cli>A remediation plan that better assures ongoing management oversight throughout the manufacturing lifecycle of all drug products. Provide a more data-driven and scientifically sound program that identifies sources of process variability, and assures that manufacturing (including both production and packaging) operations meet appropriate parameters and quality standards. This includes, but is not limited to, evaluating suitability of equipment for its intended use, ensuring quality of input materials, determining the capability and reliability of each manufacturing process step and its controls, and vigilant ongoing monitoring of process performance and product quality.\u003C\u002Fli>\u003Cli>A comprehensive, independent assessment and remediation plan for systems used in the visual inspection of sterile drugs for defects (including but not limited to particulate matter). The assessment should include adequacy of inspection methods, acceptance and rejection criteria, personnel training, supervision, equipment and personnel qualification, equipment maintenance, and the procedures governing them. Provide your detailed remediation action plan that includes dates by which each remediation activity will be completed, and provisions for periodic independent reassessment of the plan’s effectiveness.\u003C\u002Fli>\u003Cli>A detailed summary of your validation program for ensuring a state of control throughout the product lifecycle, along with associated procedures. Describe your program for process performance qualification (PPQ), and ongoing monitoring of both intra-batch and inter-batch variation to ensure a continuing state of control. Also, summarize the program for qualification of your equipment and facility.\u003C\u002Fli>\u003Cli>Timelines for completing further PPQ studies on remediated processes for marketed drug products for which a state of control has not been adequately established.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>2. Your firm failed to thoroughly investigate any unexplained discrepancy or failure of a batch or any of its components to meet any of its specifications, whether or not the batch has already been distributed (21 CFR 211.192).\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Your firm lacked meaningful investigations of failed sterility and bioburden test results. For example:\u003C\u002Fp>\u003Cp>\u003Cem>Sterility Failure\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Your quality unit (QU) did not adequately investigate a failed sterility test result for your \u003Cstrong>(b)(4)\u003C\u002Fstrong> drug product, VISCO SHIELD Topical Drops, lot V0724N. Your external testing laboratory performs two sterility tests: one for the contents within the syringe and the other for the sterility of the syringe and cap primary packaging components. Your external testing laboratory reported a sterility failure for the syringe and cap portion of the testing. You concluded in NCR 24014 that, because the contaminant was found only on the syringe and cap and not the contents of the syringe, the likely root cause of the sterility failure was laboratory contamination due to excessive handling during the test. However, your contract testing laboratory’s investigation concluded that there was no laboratory error. You failed to resolve the conflicting root cause conclusions and did not extend your investigation to other potential sources of contamination or ensure it was of appropriate scope. Although the batch remained under your control, your QU had dispositioned this batch “USE AS IS” on September 30, 2024, to be distributed to the U.S. market.\u003C\u002Fp>\u003Cp>In your response to the sterility failure, we acknowledge your intention to create a specific procedure to address external laboratory out-of-specification (OOS) investigations. However, your investigation failed to consider conditions that led to the sterility failure or determine potential root causes to ensure effective CAPAs were promptly initiated. Additionally, you do not adequately address the potential non-integrity failure mode of the packaged finished drug product (e.g., breach in packaging integrity following \u003Cstrong>(b)(4)\u003C\u002Fstrong>).\u003C\u002Fp>\u003Cp>\u003Cem>Bioburden OOS\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Your firm did not adequately investigate your firm’s pre-sterilization bioburden results that exceeded their specifications (\u003Cstrong>(b)(4)\u003C\u002Fstrong>) for VISCO SHIELD Topical Drops, lot V0724G. One sample exceeded the specification for the aerobic plate count test with a result of 570 CFU\u002Fsample and another sample exceeded the specification for the yeast and mold count test with a result of 334 CFU\u002Fsample.\u003C\u002Fp>\u003Cp>In your response to the bioburden OOS, your investigation fails to consider the conditions that led to the OOS. You do not identify the microbes recovered or determine resistance of any spore-forming microbes that may have been present. You also do not address potential root causes during the production process that could contribute to excess bioburden. Assessment of the number of types of microbes in pre-sterilization bioburden helps to determine whether the validated \u003Cstrong>(b)(4)\u003C\u002Fstrong> process continues to be capable of rendering the finished product sterile.\u003C\u002Fp>\u003Cp>Whenever an investigation lacks conclusive evidence of laboratory error, a thorough investigation of potential manufacturing causes must be performed.\u003C\u002Fp>\u003Cp>For more information about handling failing, OOS, out-of-trend, or other unexpected results and documentation of your investigations, see FDA’s guidance document \u003Cem>Investigating Out-of-Specification (OOS) Test Results for Pharmaceutical Production\u003C\u002Fem> at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F158416\u002Fdownload. While this guidance generally applies to chemistry-based laboratory testing, many of the principles are relevant to microbiological testing.\u003C\u002Fp>\u003Cp>In response to this letter, provide:\u003C\u002Fp>\u003Cul>\u003Cli>The disposition status of the referenced batch, VISCO SHIELD Topical Drops, lot V0724N. If the lot was released for distribution, provide the dates of release and distribution.\u003C\u002Fli>\u003Cli>A comprehensive, independent assessment of your overall system for investigating deviations, discrepancies, complaints, OOS results, and failures. Provide a detailed action plan to remediate this system. Your action plan should include, but not be limited to, significant improvements in investigation competencies, scope determination, root cause evaluation, CAPA effectiveness, QU oversight, and written procedures. Address how your firm will ensure all phases of investigations are appropriately conducted.\u003C\u002Fli>\u003Cli>An independent assessment and remediation plan for your CAPA program. Provide a report that evaluates whether the program includes effective root cause analysis, ensures CAPA effectiveness, analyzes investigations trends, improves the CAPA program when needed, implements final QU decisions, and is fully supported by executive management.\u003C\u002Fli>\u003Cli>A retrospective, independent review of all invalidated OOS (including in-process and release\u002Fstability testing) results for US products within expiry as of the date of this letter and a report summarizing the findings of the analysis, including the following for each OOS:\u003Cbr>o Determine whether the scientific justification and evidence relating to the invalidated OOS result conclusively or inconclusively demonstrates causative laboratory error.\u003Cbr>o For investigations that conclusively establish laboratory root cause, provide rationale and ensure that all other laboratory methods vulnerable to the same or similar root cause are identified for remediation.\u003Cbr>o For all OOS results found by the retrospective review to have an inconclusive or no root cause identified in the laboratory, include a thorough review of production (e.g., batch manufacturing records, adequacy of the manufacturing steps, suitability of equipment\u002Ffacilities, variability of raw materials, process capability, deviation history, complaint history, batch failure history). Provide a summary of potential manufacturing root causes for each investigation, and any manufacturing operation improvements.\u003C\u002Fli>\u003Cli>A comprehensive review and remediation plan for your OOS result investigation systems. The CAPA should include, but not be limited to, addressing the following:\u003Cbr>o QU oversight of laboratory investigations.\u003Cbr>o Identification of adverse laboratory control trends.\u003Cbr>o Resolution of causes of laboratory variation.\u003Cbr>o Initiation of thorough investigations of potential manufacturing causes whenever a laboratory cause cannot be conclusively identified.\u003Cbr>o Adequately scoping of each investigation and its CAPA.\u003Cbr>o Revised OOS investigation procedures with these and other remediations.\u003C\u002Fli>\u003Cli>A detailed retrospective review and assessment of your \u003Cstrong>(b)(4)\u003C\u002Fstrong> program. The retrospective review and assessment should include:\u003Cbr>o All changes to the drug product, container closure system, and packaging (e.g., canula sheath).\u003Cbr>o An evaluation of changes to, and maintenance of, the \u003Cstrong>(b)(4)\u003C\u002Fstrong> equipment.\u003Cbr>o A plan to evaluate the safety and quality of distributed finished products that remain within expiry if significant changes occurred that may pose a risk to quality or safety.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>3. Your firm failed to establish laboratory controls that include scientifically sound and appropriate specifications, standards, sampling plans, and test procedures designed to assure that components, drug product containers, closures, in-process materials, labeling, and drug products conform to appropriate standards of identity, strength, quality, and purity. You also failed to establish and follow an adequate written testing program designed to assess the stability characteristics of drug products and to use results of stability testing to determine appropriate storage conditions and expiration dates (21 CFR 211.160(b)) and (21 CFR 211.166(a)).\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>\u003Cem>Finished Product Testing\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Your finished product testing for release of ophthalmic drug product batches did not include adequate analytical testing to determine the identification or assay of the active ingredient, hydroxypropyl methylcellulose (Hypromellose).\u003C\u002Fp>\u003Cp>Your response and subsequent updates are inadequate. You commit to updating your finished product specifications. However, you reference an internally-developed, non-specific method for assay (strength) without providing adequate documentation and scientific justification to support its use. In contrast, a method is available in the USP that employs a reference standard and spectrophotometric measurements to determine Hypromellose assay.\u003C\u002Fp>\u003Cp>\u003Cem>Stability Program\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Your firm lacked an adequate stability program to support the \u003Cstrong>(b)(4)\u003C\u002Fstrong> expiration date. For example:\u003C\u002Fp>\u003Cul>\u003Cli>Your firm did not establish appropriate tests and specifications for your ophthalmic drug products to monitor the active ingredient identity or assay at release and throughout expiry. Your stability program did not include an adequate test for assay of the active ingredient, hydroxypropyl methylcellulose (Hypromellose). In place of the USP assay, your firm used an in-house method based on loss-on-drying without scientific justification.\u003C\u002Fli>\u003Cli>Your firm did not follow your Operational Procedure,\u003Cem> Control, Testing, and Release of Drug Products\u003C\u002Fem>, which requires placement of samples from one commercial batch of each product on the stability program each year, and testing at \u003Cstrong>(b)(4)\u003C\u002Fstrong> intervals. Your 2023 batch was delayed in its entry to your stability program and your 2024 testing was not initiated. A similar pattern of non-compliance was noted during your 2018 inspection.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Your response is inadequate. You reference stability studies from batches made in 2013 and 2016 to justify reduced stability testing intervals. You fail to provide a root cause or an adequate CAPA to address the failure to follow your own stability procedure.\u003C\u002Fp>\u003Cp>Drug product batches must be tested for identity, strength, quality, and purity prior to release. Without sufficient release and ongoing stability testing, defective drug products that may pose a risk to consumers are unlikely to be detected.\u003C\u002Fp>\u003Cp>In response to this letter, provide:\u003C\u002Fp>\u003Cul>\u003Cli>The method validation protocol, report, and supporting data for your current Hypromellose assay method, and any revised methods. Include the scientific rationale for its use as release and stability indicating tests.\u003C\u002Fli>\u003Cli>A comprehensive independent assessment of your laboratory practices, procedures, methods, equipment, documentation, and analyst competencies. Based on this review, provide a detailed plan to remediate and evaluate the effectiveness of your laboratory system.\u003C\u002Fli>\u003Cli>A list of chemical and microbial specifications, including test methods, used to analyze each batch of your drug products before a batch disposition decision.\u003Cbr>o An action plan and timelines for conducting full chemical and microbiological testing of retain samples to determine the quality of all batches of drug product distributed to the United States that are within expiry as of the date of this letter.\u003Cbr>o A summary of all results obtained from testing retain samples from each batch. If such testing reveals substandard quality drug products, take rapid corrective actions, such as notifying customers and product recalls.\u003C\u002Fli>\u003Cli>A comprehensive, independent assessment and CAPA plan to ensure the adequacy of your stability program. Your remediated program should include, but not be limited to:\u003Cbr>o Stability indicating methods.\u003Cbr>o Stability studies for each drug product in its marketed container-closure system before distribution is permitted.\u003Cbr>o An ongoing program in which representative batches of each product are added each year to the program to determine if the shelf-life claim remains valid.\u003C\u002Fli>\u003Cli>All procedures that describe these and other elements of your remediated stability program.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>4. Your firm failed to establish an adequate quality unit and the responsibilities and procedures applicable to the quality control unit are not in writing and fully followed (21 CFR 211.22(a) and (d)).\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Your firm’s QU failed to adequately execute its responsibilities.\u003C\u002Fp>\u003Cp>This includes oversight of both internal and external manufacturing activities, including laboratory services.\u003C\u002Fp>\u003Cp>Regarding functions that occurred at your facility, the records and information you provided demonstrate that your QU did not effectively exercise its responsibilities to oversee the quality of your ophthalmic drug manufacturing operations. Your firm failed to follow established procedures. For example, you had not conducted annual product reviews since 2018, which was cited as an observation in a previous inspection. In addition, your firm did not conduct annual examinations of reserve samples for the past 2 years.\u003C\u002Fp>\u003Cp>Regarding external functions performed on your behalf, your ongoing oversight of critical contract services was insufficient.\u003C\u002Fp>\u003Cp>Your QU is responsible for fully exercising its authority and responsibilities. Our inspectional findings indicate that your QU is not conducting appropriate oversight of drug CGMP operations.\u003C\u002Fp>\u003Cp>Your response is inadequate. Although you commit to addressing the observations we identified, your response lacks detail on systemic remediations needed for your QU and your quality system.\u003C\u002Fp>\u003Cp>Your firm’s quality systems are inadequate. See FDA’s guidance document \u003Cem>Quality Systems Approach to Pharmaceutical CGMP Regulations\u003C\u002Fem> for help implementing quality systems and risk management approaches to meet the requirements of CGMP regulations 21 CFR, parts 210 and 211 at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F71023\u002Fdownload.\u003C\u002Fp>\u003Cp>In response to this letter, provide:\u003C\u002Fp>\u003Cul>\u003Cli>A comprehensive assessment and remediation plan to ensure your QU is given the authority and resources to effectively function. The assessment should also include, but not be limited to:\u003Cbr>o A determination of whether procedures used by your firm are robust and appropriate.\u003Cbr>o Detailed definition of the specific attributes to be tested at each station (timepoint).\u003Cbr>o Provisions for QU oversight throughout your operations to evaluate adherence to appropriate practices. o A complete and final review of each batch and its related information before the QU disposition decision.\u003Cbr>o Oversight and approval of investigations and discharging of all other QU duties to ensure identity, strength, quality, and purity of all products.\u003C\u002Fli>\u003Cli>Also describe how top management supports quality assurance and reliable operations, including but not limited to, timely provision of resources to proactively address emerging manufacturing\u002Fquality issues and to assure a continuing state of control.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>CGMP Consultant Recommended\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Based upon the nature of the violations we identified at your firm and because you failed to correct repeat violations, you should engage a consultant qualified as set forth in 21 CFR 211.34 to assist your firm in meeting CGMP requirements.\u003C\u002Fp>\u003Cp>Your use of a consultant does not relieve your firm’s obligation to comply with CGMP. Your firm’s executive management remains responsible for resolving all deficiencies and systemic flaws to ensure ongoing CGMP compliance.\u003C\u002Fp>\u003Cp>\u003Cstrong>Conclusion\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>The violations cited in this letter are not intended to be an all-inclusive list of violations that exist at your facility. You are responsible for investigating and determining the causes of any violations and for preventing their recurrence or the occurrence of other violations.\u003C\u002Fp>\u003Cp>Correct any violations promptly. Failure to promptly and adequately address this matter may result in regulatory or legal action without further notice including, without limitation, seizure and injunction. Unresolved violations may also prevent other Federal agencies from awarding contracts.\u003C\u002Fp>\u003Cp>Failure to address violations may also cause FDA to withhold issuance of Export Certificates. FDA may withhold approval of new applications or supplements listing your firm as a drug manufacturer until any violations are completely addressed and we confirm your compliance with CGMP. We may re-inspect to verify that you have completed corrective actions to address any violations.\u003C\u002Fp>\u003Cp>This letter notifies you of our findings and provides you an opportunity to address the above deficiencies. After you receive this letter, respond to this office in writing within 15 working days. Specify what you have done to address any violations and to prevent their recurrence. In response to this letter, you may provide additional information for our consideration as we continue to assess your activities and practices. If you cannot complete corrective actions within 15 working days, state your reasons for delay and your schedule for completion.\u003C\u002Fp>\u003Cp>Send your electronic reply to CDER-OC-OMQ-Communications@fda.hhs.gov. Identify your response with FEI 2083373 and ATTN: Carrie A. Hughes.\u003C\u002Fp>\u003Cp>Sincerely,\u003Cbr>\u002FS\u002F\u003C\u002Fp>\u003Cp>Francis Godwin\u003Cbr>Director\u003Cbr>Office of Manufacturing Quality\u003Cbr>Office of Compliance\u003Cbr>Center for Drug Evaluation and Research\u003C\u002Fp>\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVia Email\n\nReference #:\n\n320-25-93\n\nProduct:\n\nDrugs\n\nRecipient:\n\nRecipient Name\n\nMr. Norman Craig Delgado\n\nRecipient Title\n\nPresident and CEO\n\nOasis Medical, Inc.\n\n514 S. Vermont Avenue\n\nGlendora, CA 91741\n\nUnited States\n\nIssuing Office:\n\nCenter for Drug Evaluation and Research (CDER)\n\nUnited States\n\nWarning Letter 320-25-93\nJuly 15, 2025\nDear Mr. Delgado:\nThe United States Food and Drug Administration (FDA) inspected your drug manufacturing facilities, Oasis Medical, Inc., FEI 2083373, at 514 S. Vermont Avenue, Glendora, from January 15 to 27, 2025.\nThis warning letter summarizes significant violations of Current Good Manufacturing Practice (CGMP) regulations for finished pharmaceuticals. See Title 21 Code of Federal Regulations (CFR), parts 210 and 211 (21 CFR parts 210 and 211).\nBecause your methods, facilities, or controls for manufacturing, processing, packing, or holding do not conform to CGMP, your drug products are adulterated within the meaning of section 501(a)(2)(B) of the Federal Food, Drug, and Cosmetic Act (FD&C Act), 21 U.S.C. 351(a)(2)(B).\nWe reviewed your February 17, 2025 response to our Form FDA 483 in detail and acknowledge receipt of your subsequent correspondence.\nDuring our inspection, our investigators observed specific violations including, but not limited to, the following.\n1. Your firm failed to establish adequate written procedures for production and process control designed to assure that the drug products you manufacture have the identity, strength, quality, and purity they purport or are represented to possess (21 CFR 211.100(a)).\nYour firm failed to ensure the use of reproducible manufacturing processes for the production of sterile ophthalmic drug products. You also lacked an ongoing program to establish stable manufacturing operations, monitor ongoing process control, and provide for consistent drug quality. For example,\nYour process lacked adequate control and is prone to producing an excessive number of defective units. A substantial portion of batches have been rejected, including total reject levels (b)(4) in a number of cases. Of special concern are the excessive number of defective products due to visible particulate contamination (e.g., recurring instances of levels greater than (b)(4)). Batches with very high defect levels were nonetheless distributed.\nYou failed to establish and follow an adequate visual inspection program for the ophthalmic drugs manufactured by your firm.\nThere was no classification as to the severity of the defects (i.e., critical, major, minor) or limit for the number of defects allowed, if any.\nThe most recently completed requalification study for your (b)(4) cycle was conducted in 2023 and inadequately considered potential changes from previous qualifications and the original validation. The 2023 requalification did not include an assessment of (b)(4) maintenance or changes to the drug product components.\nThe maximum duration of the hold steps in your manufacturing process (e.g., extensive hold times prior to (b)(4)) has not been validated.\nYour response fails to address your lack of process capability, and the overreliance on visual inspection in an attempt to remove excessive defective units from batches.\nYou do not commit to thoroughly investigate the root causes of the visible particulates and excessive occurrence of these critical defects. You also lack appropriate interim steps to prevent production of further batches from a low capability process while you make efforts to remediate it. In addition, the response lacks a commitment to address potentially contaminated products in distribution.\nRegarding the visual inspection program, your response lacks a commitment to perform a comprehensive reassessment of this program.\nRegarding production hold times, your response acknowledges that you have not performed validation of your hold steps. But you do not commit to validating all in-process hold times and include a date by which these studies will be completed.\nProcess validation evaluates the soundness of design and state of control of a process through its lifecycle. Each significant stage of a manufacturing process must be designed appropriately to ensure the quality of raw material inputs, materials, and finished drugs. Process qualification studies determine whether an initial state of control has been established. Successful process qualification studies are necessary before commercial distribution. Thereafter, ongoing vigilant oversight of process performance and product quality are necessary to ensure you maintain a stable manufacturing operation throughout the product lifecycle.\nSee FDA’s guidance document Process Validation: General Principles and Practices for general principles and approaches that FDA considers appropriate elements of process validation, at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F71021\u002Fdownload.\nIn response to this letter, provide:\nA detailed retrospective review and assessment of your (b)(4) program. The retrospective review and assessment should include all changes to the drug product, container closure system, and packaging (e.g., canula sheath); and an evaluation of changes to, and maintenance of, the (b)(4) equipment. If changes are identified, provide your plan to evaluate the safety and quality of distributed finished products that remain within expiry and a plan to ensure the safety and quality of your drug products until the (b)(4) process is successfully validated.\nThorough investigation(s), including corrective actions and preventive actions (CAPA), regarding finished product batches manufactured and released for distribution despite high numbers of rejected units.\nComplete results of your examination of retains\u002Freserve samples for all batches from January 2023 to present for defects, and any related investigation(s) and corrective actions.\nA list of all batches since January 1, 2023, to present, with the following information:\no Product name\no Batch number\no Date of manufacture\no Date of expiration\no Batch size (original quantity of theoretical syringes)\no Actual batch yield (number of pouched syringe units)\no Number of rejects due to particulates\no Number of rejects due to other defects (include the top 3 other defect types for each batch, beyond particulate defects)\no Percent yield\nA remediation plan that better assures ongoing management oversight throughout the manufacturing lifecycle of all drug products. Provide a more data-driven and scientifically sound program that identifies sources of process variability, and assures that manufacturing (including both production and packaging) operations meet appropriate parameters and quality standards. This includes, but is not limited to, evaluating suitability of equipment for its intended use, ensuring quality of input materials, determining the capability and reliability of each manufacturing process step and its controls, and vigilant ongoing monitoring of process performance and product quality.\nA comprehensive, independent assessment and remediation plan for systems used in the visual inspection of sterile drugs for defects (including but not limited to particulate matter). The assessment should include adequacy of inspection methods, acceptance and rejection criteria, personnel training, supervision, equipment and personnel qualification, equipment maintenance, and the procedures governing them. Provide your detailed remediation action plan that includes dates by which each remediation activity will be completed, and provisions for periodic independent reassessment of the plan’s effectiveness.\nA detailed summary of your validation program for ensuring a state of control throughout the product lifecycle, along with associated procedures. Describe your program for process performance qualification (PPQ), and ongoing monitoring of both intra-batch and inter-batch variation to ensure a continuing state of control. Also, summarize the program for qualification of your equipment and facility.\nTimelines for completing further PPQ studies on remediated processes for marketed drug products for which a state of control has not been adequately established.\n2. Your firm failed to thoroughly investigate any unexplained discrepancy or failure of a batch or any of its components to meet any of its specifications, whether or not the batch has already been distributed (21 CFR 211.192).\nYour firm lacked meaningful investigations of failed sterility and bioburden test results. For example:\nSterility Failure\nYour quality unit (QU) did not adequately investigate a failed sterility test result for your (b)(4) drug product, VISCO SHIELD Topical Drops, lot V0724N. Your external testing laboratory performs two sterility tests: one for the contents within the syringe and the other for the sterility of the syringe and cap primary packaging components. Your external testing laboratory reported a sterility failure for the syringe and cap portion of the testing. You concluded in NCR 24014 that, because the contaminant was found only on the syringe and cap and not the contents of the syringe, the likely root cause of the sterility failure was laboratory contamination due to excessive handling during the test. However, your contract testing laboratory’s investigation concluded that there was no laboratory error. You failed to resolve the conflicting root cause conclusions and did not extend your investigation to other potential sources of contamination or ensure it was of appropriate scope. Although the batch remained under your control, your QU had dispositioned this batch “USE AS IS” on September 30, 2024, to be distributed to the U.S. market.\nIn your response to the sterility failure, we acknowledge your intention to create a specific procedure to address external laboratory out-of-specification (OOS) investigations. However, your investigation failed to consider conditions that led to the sterility failure or determine potential root causes to ensure effective CAPAs were promptly initiated. Additionally, you do not adequately address the potential non-integrity failure mode of the packaged finished drug product (e.g., breach in packaging integrity following (b)(4)).\nBioburden OOS\nYour firm did not adequately investigate your firm’s pre-sterilization bioburden results that exceeded their specifications ((b)(4)) for VISCO SHIELD Topical Drops, lot V0724G. One sample exceeded the specification for the aerobic plate count test with a result of 570 CFU\u002Fsample and another sample exceeded the specification for the yeast and mold count test with a result of 334 CFU\u002Fsample.\nIn your response to the bioburden OOS, your investigation fails to consider the conditions that led to the OOS. You do not identify the microbes recovered or determine resistance of any spore-forming microbes that may have been present. You also do not address potential root causes during the production process that could contribute to excess bioburden. Assessment of the number of types of microbes in pre-sterilization bioburden helps to determine whether the validated (b)(4) process continues to be capable of rendering the finished product sterile.\nWhenever an investigation lacks conclusive evidence of laboratory error, a thorough investigation of potential manufacturing causes must be performed.\nFor more information about handling failing, OOS, out-of-trend, or other unexpected results and documentation of your investigations, see FDA’s guidance document Investigating Out-of-Specification (OOS) Test Results for Pharmaceutical Production at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F158416\u002Fdownload. While this guidance generally applies to chemistry-based laboratory testing, many of the principles are relevant to microbiological testing.\nIn response to this letter, provide:\nThe disposition status of the referenced batch, VISCO SHIELD Topical Drops, lot V0724N. If the lot was released for distribution, provide the dates of release and distribution.\nA comprehensive, independent assessment of your overall system for investigating deviations, discrepancies, complaints, OOS results, and failures. Provide a detailed action plan to remediate this system. Your action plan should include, but not be limited to, significant improvements in investigation competencies, scope determination, root cause evaluation, CAPA effectiveness, QU oversight, and written procedures. Address how your firm will ensure all phases of investigations are appropriately conducted.\nAn independent assessment and remediation plan for your CAPA program. Provide a report that evaluates whether the program includes effective root cause analysis, ensures CAPA effectiveness, analyzes investigations trends, improves the CAPA program when needed, implements final QU decisions, and is fully supported by executive management.\nA retrospective, independent review of all invalidated OOS (including in-process and release\u002Fstability testing) results for US products within expiry as of the date of this letter and a report summarizing the findings of the analysis, including the following for each OOS:\no Determine whether the scientific justification and evidence relating to the invalidated OOS result conclusively or inconclusively demonstrates causative laboratory error.\no For investigations that conclusively establish laboratory root cause, provide rationale and ensure that all other laboratory methods vulnerable to the same or similar root cause are identified for remediation.\no For all OOS results found by the retrospective review to have an inconclusive or no root cause identified in the laboratory, include a thorough review of production (e.g., batch manufacturing records, adequacy of the manufacturing steps, suitability of equipment\u002Ffacilities, variability of raw materials, process capability, deviation history, complaint history, batch failure history). Provide a summary of potential manufacturing root causes for each investigation, and any manufacturing operation improvements.\nA comprehensive review and remediation plan for your OOS result investigation systems. The CAPA should include, but not be limited to, addressing the following:\no QU oversight of laboratory investigations.\no Identification of adverse laboratory control trends.\no Resolution of causes of laboratory variation.\no Initiation of thorough investigations of potential manufacturing causes whenever a laboratory cause cannot be conclusively identified.\no Adequately scoping of each investigation and its CAPA.\no Revised OOS investigation procedures with these and other remediations.\nA detailed retrospective review and assessment of your (b)(4) program. The retrospective review and assessment should include:\no All changes to the drug product, container closure system, and packaging (e.g., canula sheath).\no An evaluation of changes to, and maintenance of, the (b)(4) equipment.\no A plan to evaluate the safety and quality of distributed finished products that remain within expiry if significant changes occurred that may pose a risk to quality or safety.\n3. Your firm failed to establish laboratory controls that include scientifically sound and appropriate specifications, standards, sampling plans, and test procedures designed to assure that components, drug product containers, closures, in-process materials, labeling, and drug products conform to appropriate standards of identity, strength, quality, and purity. You also failed to establish and follow an adequate written testing program designed to assess the stability characteristics of drug products and to use results of stability testing to determine appropriate storage conditions and expiration dates (21 CFR 211.160(b)) and (21 CFR 211.166(a)).\nFinished Product Testing\nYour finished product testing for release of ophthalmic drug product batches did not include adequate analytical testing to determine the identification or assay of the active ingredient, hydroxypropyl methylcellulose (Hypromellose).\nYour response and subsequent updates are inadequate. You commit to updating your finished product specifications. However, you reference an internally-developed, non-specific method for assay (strength) without providing adequate documentation and scientific justification to support its use. In contrast, a method is available in the USP that employs a reference standard and spectrophotometric measurements to determine Hypromellose assay.\nStability Program\nYour firm lacked an adequate stability program to support the (b)(4) expiration date. For example:\nYour firm did not establish appropriate tests and specifications for your ophthalmic drug products to monitor the active ingredient identity or assay at release and throughout expiry. Your stability program did not include an adequate test for assay of the active ingredient, hydroxypropyl methylcellulose (Hypromellose). In place of the USP assay, your firm used an in-house method based on loss-on-drying without scientific justification.\nYour firm did not follow your Operational Procedure, Control, Testing, and Release of Drug Products, which requires placement of samples from one commercial batch of each product on the stability program each year, and testing at (b)(4) intervals. Your 2023 batch was delayed in its entry to your stability program and your 2024 testing was not initiated. A similar pattern of non-compliance was noted during your 2018 inspection.\nYour response is inadequate. You reference stability studies from batches made in 2013 and 2016 to justify reduced stability testing intervals. You fail to provide a root cause or an adequate CAPA to address the failure to follow your own stability procedure.\nDrug product batches must be tested for identity, strength, quality, and purity prior to release. Without sufficient release and ongoing stability testing, defective drug products that may pose a risk to consumers are unlikely to be detected.\nIn response to this letter, provide:\nThe method validation protocol, report, and supporting data for your current Hypromellose assay method, and any revised methods. Include the scientific rationale for its use as release and stability indicating tests.\nA comprehensive independent assessment of your laboratory practices, procedures, methods, equipment, documentation, and analyst competencies. Based on this review, provide a detailed plan to remediate and evaluate the effectiveness of your laboratory system.\nA list of chemical and microbial specifications, including test methods, used to analyze each batch of your drug products before a batch disposition decision.\no An action plan and timelines for conducting full chemical and microbiological testing of retain samples to determine the quality of all batches of drug product distributed to the United States that are within expiry as of the date of this letter.\no A summary of all results obtained from testing retain samples from each batch. If such testing reveals substandard quality drug products, take rapid corrective actions, such as notifying customers and product recalls.\nA comprehensive, independent assessment and CAPA plan to ensure the adequacy of your stability program. Your remediated program should include, but not be limited to:\no Stability indicating methods.\no Stability studies for each drug product in its marketed container-closure system before distribution is permitted.\no An ongoing program in which representative batches of each product are added each year to the program to determine if the shelf-life claim remains valid.\nAll procedures that describe these and other elements of your remediated stability program.\n4. Your firm failed to establish an adequate quality unit and the responsibilities and procedures applicable to the quality control unit are not in writing and fully followed (21 CFR 211.22(a) and (d)).\nYour firm’s QU failed to adequately execute its responsibilities.\nThis includes oversight of both internal and external manufacturing activities, including laboratory services.\nRegarding functions that occurred at your facility, the records and information you provided demonstrate that your QU did not effectively exercise its responsibilities to oversee the quality of your ophthalmic drug manufacturing operations. Your firm failed to follow established procedures. For example, you had not conducted annual product reviews since 2018, which was cited as an observation in a previous inspection. In addition, your firm did not conduct annual examinations of reserve samples for the past 2 years.\nRegarding external functions performed on your behalf, your ongoing oversight of critical contract services was insufficient.\nYour QU is responsible for fully exercising its authority and responsibilities. Our inspectional findings indicate that your QU is not conducting appropriate oversight of drug CGMP operations.\nYour response is inadequate. Although you commit to addressing the observations we identified, your response lacks detail on systemic remediations needed for your QU and your quality system.\nYour firm’s quality systems are inadequate. See FDA’s guidance document Quality Systems Approach to Pharmaceutical CGMP Regulations for help implementing quality systems and risk management approaches to meet the requirements of CGMP regulations 21 CFR, parts 210 and 211 at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F71023\u002Fdownload.\nIn response to this letter, provide:\nA comprehensive assessment and remediation plan to ensure your QU is given the authority and resources to effectively function. The assessment should also include, but not be limited to:\no A determination of whether procedures used by your firm are robust and appropriate.\no Detailed definition of the specific attributes to be tested at each station (timepoint).\no Provisions for QU oversight throughout your operations to evaluate adherence to appropriate practices. o A complete and final review of each batch and its related information before the QU disposition decision.\no Oversight and approval of investigations and discharging of all other QU duties to ensure identity, strength, quality, and purity of all products.\nAlso describe how top management supports quality assurance and reliable operations, including but not limited to, timely provision of resources to proactively address emerging manufacturing\u002Fquality issues and to assure a continuing state of control.\nCGMP Consultant Recommended\nBased upon the nature of the violations we identified at your firm and because you failed to correct repeat violations, you should engage a consultant qualified as set forth in 21 CFR 211.34 to assist your firm in meeting CGMP requirements.\nYour use of a consultant does not relieve your firm’s obligation to comply with CGMP. Your firm’s executive management remains responsible for resolving all deficiencies and systemic flaws to ensure ongoing CGMP compliance.\nConclusion\nThe violations cited in this letter are not intended to be an all-inclusive list of violations that exist at your facility. You are responsible for investigating and determining the causes of any violations and for preventing their recurrence or the occurrence of other violations.\nCorrect any violations promptly. Failure to promptly and adequately address this matter may result in regulatory or legal action without further notice including, without limitation, seizure and injunction. Unresolved violations may also prevent other Federal agencies from awarding contracts.\nFailure to address violations may also cause FDA to withhold issuance of Export Certificates. FDA may withhold approval of new applications or supplements listing your firm as a drug manufacturer until any violations are completely addressed and we confirm your compliance with CGMP. We may re-inspect to verify that you have completed corrective actions to address any violations.\nThis letter notifies you of our findings and provides you an opportunity to address the above deficiencies. After you receive this letter, respond to this office in writing within 15 working days. Specify what you have done to address any violations and to prevent their recurrence. In response to this letter, you may provide additional information for our consideration as we continue to assess your activities and practices. If you cannot complete corrective actions within 15 working days, state your reasons for delay and your schedule for completion.\nSend your electronic reply to CDER-OC-OMQ-Communications@fda.hhs.gov. Identify your response with FEI 2083373 and ATTN: Carrie A. Hughes.\nSincerely,\n\u002FS\u002F\nFrancis Godwin\nDirector\nOffice of Manufacturing Quality\nOffice of Compliance\nCenter for Drug Evaluation and Research","Oasis Medical, Inc.","oasis-medical-inc-707198-07152025","2026-08-18T06:42:28.676509+00:00",null,"https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Foasis-medical-inc-707198-07152025","2026-10-26T08:09:36.575698+00:00","Warning Letter","Issued","2025-08-05","707198","Drugs","Mr. Norman Craig Delgado","2026-08-19T16:31:41.001+00:00","Via Email","320-25-93","2025-07-15",{"id":33,"raw":34,"subject":40,"body_html":41,"body_text":42,"firm_name":43,"letter_id":44,"created_at":45,"fei_number":19,"letter_url":46,"updated_at":47,"action_type":22,"case_status":23,"posted_date":48,"marcs_cms_no":49,"product_type":50,"closeout_date":19,"issuing_office":38,"recipient_name":51,"body_fetched_at":52,"delivery_method":29,"recipient_title":19,"reference_number":19,"action_taken_date":53,"medical_device_id":19,"response_letter_date":19},1152,[35,36,37,38,39,13,13,13],"\u003Ctime datetime=\"2024-11-26T14:20:00Z\">11\u002F26\u002F2024\u003C\u002Ftime>\n","\u003Ctime datetime=\"2024-10-11T04:00:00Z\">10\u002F11\u002F2024\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fadept-medical-ltd-692226-10112024\">Adept Medical Ltd. \u003C\u002Fa>","Center for Devices and Radiological Health","CGMP\u002FQSR\u002FMedical Devices\u002FAdulterated\u002FMisbranded\u003Cbr \u002F>\r\n","CGMP\u002FQSR\u002FMedical Devices\u002FAdulterated\u002FMisbranded","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>Via Email\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Mr. Murray Fenton\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>Founder, CEO and Guiding Director\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Adept Medical Ltd. \u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>2-6 Mc Donald Street\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Morningside\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Auckland\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>New Zealand\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>October 11, 2024\u003C\u002Fp>\n\n\u003Cp>Dear Mr. Fenton:\u003C\u002Fp>\n\n\u003Cp>During an inspection of your firm located in Auckland, New Zealand on May 13, 2024, through May 16, 2024, an investigator from the United States Food and Drug Administration (FDA) determined that your firm manufactures Tympanostomy Tubes \"NeoZoline Ventilation Tubes\". Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\u003C\u002Fp>\n\n\u003Cp>This inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. §351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. We received a response from Ms. Yi Huang, Quality and Regulatory Manager dated June 13, 2024, concerning our investigator's observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, which was issued to your firm. We address this response below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\u003C\u002Fp>\n\n\u003Cp>1. Failure to establish and maintain procedures for acceptance activities, which include inspections, tests, or other verification activities, as required by 21 CFR 820.80(a).\u003C\u002Fp>\n\n\u003Cp>For example:\u003C\u002Fp>\n\n\u003Cp>1) Your firm's current incoming inspection and acceptance procedure for Biological Indicator \u003Cstrong>(b)(4)\u003C\u002Fstrong> (BI) is not adequately established. This inadequacy could compromise the sterilization process, potentially affecting the safety and effectiveness of the NeoZoline V ntilation Tubes. Your firm discards the Certificate of Conformance provided by&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> with each BI batch, which was requested by the FDA investigator during the inspection. It appears that your firm failed to retain critical documents such as the reconciliation sheet, production batch record, or \u003Cstrong>(b)(4)\u003C\u002Fstrong> Certification of Conformance, which are required under your own WI22 \"Production QC and Release Product Register,\" specifically section 2.3, to demonstrate that the product was successfully sterilized. The inspection revealed that your firm does not perform BI Population verification tests on the received BI batches to ensure that the population has not changed during shipping or storage. This is a critical step is necessary to provide a high degree of assurance that the BIs are viable to support verification that finished product is successfully sterilized through the&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> Sterilization process. Additionally, the inspection revealed that critical information such as the batch number and expiration date of the BI used in the sterile load is not documented on the post-sterilization B1 Test Reports, which are used as part of the finished device acceptance and release process.\u003C\u002Fp>\n\n\u003Cp>2) Your firm's incoming inspection and acceptance procedure for Sterile Potties (M1421, M1422) used for storing ultrasound cleaned NeoZoline Ventilation Tubes is not adequately established. The inspection revealed that your firm accepts incoming sterile pottle lots without a Certificate of Sterilization from the supplier. \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm stated that no additional testing or verification is performed to ensure the sterility of the incoming potties.&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on June 1, 2024. Your firm concluded that a risk analysis of the specific observation indicates no risk to end users for products currently in distribution and manufacturing. That conclusion is based on the following factors:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>The&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> Biological Indicator is an off the shelf product from supplier where \u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;has claimed compliance with ISO 11138-1:2017 and ISO 11138-2:2017.\u003C\u002Fli>\n\t\u003Cli>The BI is packaged in a foil pouch designed to protect the product from humidity excursions.\u003C\u002Fli>\n\t\u003Cli>The potties are used to store non-sterile Ventilation Tubes hence the sterility of the pottle is not a requirement.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>Additionally, your firm has outlined a plan with the following actions to be completed by December 1, 2024, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Based on your firm's response there is an ambiguity in the definition of the term `pottle' and whether it is required to be sterile or not. \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>your firm's response states that there is no risk for the stenle products manufactured at your facility because the BIs that they use conform to ISO 11138-1:2017 and ISO 11138-2:2017, and that they are in their sterile packaging until they are needed. However, the inspection demonstrated that your firm does not do any testing to verify that the BIs purchased for the purpose of demonstrating that terminal sterilization is achieved, are actually viable when they are used. Additionally, the inspection revealed that they do not capture key data such as BI batch number and expiration date, and thus if a BI falsely indicated that a sterilization was successful, there is no mechanism by which your firm can trace the lots of sterile products back to a failed BI.\u003C\u002Fp>\n\n\u003Cp>Additionally, your firm did not include documentation or evidence of the corrections or corrective actions because they are in progress and have not been completed. Additionally, given the observations described above, your firm has not provided a commitment to conduct a retrospective assessment of all finished devices whose sterilization was verified using Biological Indicator \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>to determine whether sterility was compromised.\u003C\u002Fp>\n\n\u003Cp>2. Failure to ensure that where the results of a process cannot be fully verified by subsequent inspection and test, the process shall be validated with a high degree of assurance and approved according to established procedures, as required by 21 CFR 820.75(a). For example:\u003C\u002Fp>\n\n\u003Cp>1) Your firm's ultrasonic cleaning process using the&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>Cleaner&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>is not adequately validated according to your firm's Manufacturing Process&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;\u003C\u002Fstrong>During the inspection, FDA's investigator revealed that the ultrasonic cleaning process was not adequately validated because critical details—such as the description of the NeoZoline Ventilation Tube (including part number, size, and shape), the number of validation batches (runs), validation batch size, and sample size used—were not documented.\u003C\u002Fp>\n\n\u003Cp>2) During the inspection, your firm stated that it had not validated the \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>process for the NeoZoline Ventilation Tube&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm&nbsp;stated that the&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>.&nbsp; Adept Medical also confirmed during the inspection that&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;had not validated the NeoZoline Ventilation Tube&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;and that prior to Spring 2023,&nbsp;\u003Cstrong>(b)(4) \u003C\u002Fstrong>the\u003Cstrong>&nbsp;\u003C\u002Fstrong>NeoZoline Ventilation Tube \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>who also did not have a&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> NeoZoline Ventilation Tube.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates its Initial Action was completed on June 1, 2024. Your firm concluded that there is no risk to end users for products currently in supply and with distributors, based on the following factors:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>There is an existing validated sterilization process indicating a sterility assurance level of \u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fli>\n\t\u003Cli>Annual bioburden results of pre-cleaned devices have bioburden levels below&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> CFU.\u003C\u002Fli>\n\t\u003Cli>Current validation data, although not well documented in its sample selection and setting, still indicated the current setting provided adequate bioburden results, well within the capability of the sterilization process.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>Additionally, your firm has outlined a plan to be completed by June 1, 2025, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>However, your firm has not provided any evidence to substantiate your claims that the&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>sterility assurance level or the bioburden limits below \u003Cstrong>(b)(4)\u003C\u002Fstrong> CFU were consistently achievable. The inspection raised concerns about your firm sterilization process, as discussed in the above section regarding compliance with 21 CFR 820.80(a). It is noteworthy that FDA requested validation documents for the \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>Cleaner during the May 2024 inspection and did not receive any documentation to indicate that this process was validated.\u003C\u002Fp>\n\n\u003Cp>3. Failure to establish and maintain procedures for implementing corrective and preventive action, as required by 21 CFR 820.100. For example:\u003C\u002Fp>\n\n\u003Cp>Your firm's Corrective and Preventive Action (CAPA) procedure (M05-03) fails to ensure that:\u003C\u002Fp>\n\n\u003Cp>1) The quality data is adequately analyzed to identify potential and existing causes of nonconformances or other quality issues. Your firm stated to the FDA investigator that, although data is analyzed, they do not evaluate the results to determine whether any corrective or preventive actions are necessary, as required by 21 CFR 820.100(a)(3).\u003C\u002Fp>\n\n\u003Cp>2) Your firm failed to adequately verify the effectiveness of corrective actions for several CAPAs before closing them. Specifically, CAPAs CA-459, CA-438, and CA-437 were closed after implementing corrective actions, but your firm did not verify the effectiveness of these actions, as required by 21 CFR 820.100(a)(4).\u003C\u002Fp>\n\n\u003Cp>3) CA-429 was closed on February 16, 2023; at the time of the inspection, your firm stated that they had not started any of the corrective actions identified in the CAPA. As a result of the discussion during the inspection, your firm volunteered to mark the CAPA as 'open,' so that the corrective actions could be implemented.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that although procedure&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>the procedure did not instruct how to this data should be analyzed, and what subsequent actions should be taken once the data analysis is complete. However, your firm's procedure&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Your firm has outlined the following plan to be completed by April 1, 2025, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>However, your firm's response does not identify conducting a retrospective analysis for all past CAPAs, to determine the impact of the lack of data analysis, and whether the appropriate corrective and\u002For preventive action was taken to address each CAPA's root cause. Additionally, your firm did not identify what actions it would take to address the lack of implementation of identified corrective actions and whether that issue is a systemic problem.\u003C\u002Fp>\n\n\u003Cp>4. Failure to establish and maintain procedures to control product that does not conform to specified requirements, including the identification, documentation, evaluation, segregation, and disposition of nonconforming product; and failure to ensure that the evaluation includes a determination of the need for an investigation, as required by 21 CFR 820.90(a). For example:\u003C\u002Fp>\n\n\u003Cp>The FDA investigator reviewed six NC records related to your firm's NeoZoline Ventilation Tubes. All six NC records were closed (NC-2516, NC-2767, NC-2641, NC-2640, NC-2738, NC-2523), but showed the following deficiencies in documentation:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>The NC records did not adequately document the evaluation of the identified nonconformities.\u003C\u002Fli>\n\t\u003Cli>The rationale for not conducting related investigations was inadequately documented in all six NC records.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>Your firm explained that incoming NeoZoline Ventilation Tubes \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>are not inspected upon arrival.&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;\u003C\u002Fstrong>Your firm further stated that they \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;\u003C\u002Fstrong>This target achievement was cited as the reason for not taking further action.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that there is no risk to end users for products currently in supply and with distributors. That conclusion is based on postmarket surveillance data, which shows no product safety or performance complaints since the product's launch. However, a lack of documented safety signals does not ensure that nonconforming product was controlled and not introduced into commerce.\u003C\u002Fp>\n\n\u003Cp>Additionally, your firm has outlined a plan to be completed by April 1, 2025, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>However, your firm did not include documentation to demonstrate that it has evaluated or will evaluate all past non-conformances against your new procedure to determine whether additional corrective action was required to address the non-conformances identified in your NC Records.\u003C\u002Fp>\n\n\u003Cp>5. Failure to define the type and extent of control to be exercised over the product, services, suppliers, contractors, and consultants, based on the evaluation results, as required by 21 CFR 820.50(a)(2). For example:\u003C\u002Fp>\n\n\u003Cp>During the inspection, your firm was asked whether the \u003Cstrong>(b)(4)\u003C\u002Fstrong> for the NeoZoline ventilation tubes was validated&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm stated you have no knowledge or documentation regarding&nbsp;whether the&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>for the NeoZoline Ventilation Tubes had been properly&nbsp;validated.&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>Adept Medical learned the&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>Adept Medical received \u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;units of NeoZoline Ventilation Tubes in various types from&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;between June 2023 and November 2023. They released \u003Cstrong>(b)(4) \u003C\u002Fstrong>units\u003Cstrong>&nbsp;\u003C\u002Fstrong>(\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>boxes) of the NeoZoline Ventilation Tubes to the United States. Prior to June 2023, all NeoZoline Ventilation Tubes were \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;&nbsp;\u003C\u002Fstrong>Adept has failed to ensure that the conditions of the supplier agreement were adhered to by your supplier.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that there is no risk to the end users for products currently in supply and with distributors, based on the following considerations:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>The post-market periodic safety update report (PSUR) on Ventilation Tubes supplied by \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>indicated no adverse events.\u003C\u002Fli>\n\t\u003Cli>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fli>\n\t\u003Cli>Post market surveillance data indicated we have had no product safety or performance complaints since product launch.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>However, a lack of adverse events in post market safety signals does not provide assurance that the device meets its design specifications, in light of the fact that, Adept Medical was unaware that your supplier \u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;the NeoZoline Ventilation Tube \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>did not have any documentation that the \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>device was validated.\u003C\u002Fp>\n\n\u003Cp>Additionally, your firm has outlined a plan to be completed by June 1, 2025, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>However, based on your firm's response, it is unclear how you intend to evaluate suppliers' compliance with 21 CFR Part 820, the Quality System Regulation.\u003C\u002Fp>\n\n\u003Cp>Our inspection also revealed that the NeoZoline Ventilation Tubes are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PM_A) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, in that your firm did not notify FDA regarding a significant change or modification in the device that could significantly affect the safety or effectiveness of the device, as required by section 510(k) of the Act, 21 U.S.C. § 360(k), and 21 C.F.R. 807.81 (a)(3)(i).\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm has modified the NeoZoline Ventilation Tubes cleared under K061058. The modification involves the use of a \u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;which was not cleared in the original submission and is a change that could significantly affect the safety or effectiveness of the device. This modification necessitates a comprehensive risk assessment to ensure the device remains safe and effective. A new biocompatibility evaluation is required to determine if \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;\u003C\u002Fstrong>Any \u003Cstrong>(b)(4)\u003C\u002Fstrong> may affect how the device can be safely and effectively sterilized. Thus, your sterilization processes must be validated for the&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> to ensure that it can be properly sterilized without&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> becoming unsafe. The change in \u003Cstrong>(b)(4)\u003C\u002Fstrong> may alter the device's performance or specifications, so a thorough re-evaluation is necessary to ensure it still meets all necessary standards and functions as intended. Due to the \u003Cstrong>(b)(4)\u003C\u002Fstrong> modification and its potential impact on the device's safety and performance, a new 510(k) submission is required before marketing the modified device in the United States.\u003C\u002Fp>\n\n\u003Cp>For a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the agency. [21 CFR 807.81(b)] The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fd efault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\u003C\u002Fp>\n\n\u003Cp>Other federal agencies may take your compliance with the FD&amp;C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed.\u003C\u002Fp>\n\n\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, including an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm's planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Please provide a translation of documentation not in English to facilitate our review. We will notify you regarding the adequacy of your firm's response(s) and the need to re-inspect your firm's facility to verify that the appropriate corrections and\u002For corrective actions have been made. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\n\n\u003Cp>Your firm's response should be sent via email to CDRHWarningLetterResponses@fda.hhs.gov or by mail to Food and Drug Administration, Center for Devices and Radiological Health, Office of Regulatory Programs, Division of Regulatory Programs 2, FDA Regulatory Inspections and Audits Team, White Oak Building 66, 10903 New Hampshire Ave., Silver Spring, MD 20993. Refer to CMS case #692226 when replying. If you have any questions about the contents of this letter, please contact: Shu-Chen Peng, Ph.D. at 301-796-6481.\u003C\u002Fp>\n\n\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm's facility. It is your firm's responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm's manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\u003C\u002Fp>\n\n\u003Cp>Sincerely yours,\u003Cbr>\n\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>Malvina B. Eydelman, M.D.\u003Cbr>\nDirector\u003Cbr>\nOHT1: Office of Ophthalmic, Anesthesia,\u003Cbr>\nRespiratory, ENT and Dental Devices\u003Cbr>\nOffice of Product Evaluation and Quality\u003Cbr>\nCenter for Devices and Radiological Health\u003C\u002Fp>\n\n\u003Cp>CC:\u003Cbr>\n\u003Cstrong>(b)(4)\u003C\u002Fstrong>, Registrar Corp.,\u003Cbr>\n144 Research Drive,\u003Cbr>\nHampton, Virginia,\u003Cbr>\nUSA 23666\u003Cbr>\nPhone: Tel: 1-757-224-0177, Ext.&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003Cbr>\nEmail:\u003Cstrong>(b)(4)\u003C\u002Fstrong>@registrarcorp.com\u003C\u002Fp>\n\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVia Email\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nMr. Murray Fenton\n\nRecipient Title\n\nFounder, CEO and Guiding Director\n\nAdept Medical Ltd.\n\n2-6 Mc Donald Street\n\nMorningside\n\nAuckland\n\nNew Zealand\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nWARNING LETTER\n\nOctober 11, 2024\n\nDear Mr. Fenton:\n\nDuring an inspection of your firm located in Auckland, New Zealand on May 13, 2024, through May 16, 2024, an investigator from the United States Food and Drug Administration (FDA) determined that your firm manufactures Tympanostomy Tubes \"NeoZoline Ventilation Tubes\". Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\n\nThis inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. §351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. We received a response from Ms. Yi Huang, Quality and Regulatory Manager dated June 13, 2024, concerning our investigator's observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, which was issued to your firm. We address this response below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\n\n1. Failure to establish and maintain procedures for acceptance activities, which include inspections, tests, or other verification activities, as required by 21 CFR 820.80(a).\n\nFor example:\n\n1) Your firm's current incoming inspection and acceptance procedure for Biological Indicator (b)(4) (BI) is not adequately established. This inadequacy could compromise the sterilization process, potentially affecting the safety and effectiveness of the NeoZoline V ntilation Tubes. Your firm discards the Certificate of Conformance provided by (b)(4) with each BI batch, which was requested by the FDA investigator during the inspection. It appears that your firm failed to retain critical documents such as the reconciliation sheet, production batch record, or (b)(4) Certification of Conformance, which are required under your own WI22 \"Production QC and Release Product Register,\" specifically section 2.3, to demonstrate that the product was successfully sterilized. The inspection revealed that your firm does not perform BI Population verification tests on the received BI batches to ensure that the population has not changed during shipping or storage. This is a critical step is necessary to provide a high degree of assurance that the BIs are viable to support verification that finished product is successfully sterilized through the (b)(4) Sterilization process. Additionally, the inspection revealed that critical information such as the batch number and expiration date of the BI used in the sterile load is not documented on the post-sterilization B1 Test Reports, which are used as part of the finished device acceptance and release process.\n\n2) Your firm's incoming inspection and acceptance procedure for Sterile Potties (M1421, M1422) used for storing ultrasound cleaned NeoZoline Ventilation Tubes is not adequately established. The inspection revealed that your firm accepts incoming sterile pottle lots without a Certificate of Sterilization from the supplier. (b)(4). Your firm stated that no additional testing or verification is performed to ensure the sterility of the incoming potties. (b)(4)\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on June 1, 2024. Your firm concluded that a risk analysis of the specific observation indicates no risk to end users for products currently in distribution and manufacturing. That conclusion is based on the following factors:\n\nThe (b)(4) Biological Indicator is an off the shelf product from supplier where (b)(4) has claimed compliance with ISO 11138-1:2017 and ISO 11138-2:2017.\n\nThe BI is packaged in a foil pouch designed to protect the product from humidity excursions.\n\nThe potties are used to store non-sterile Ventilation Tubes hence the sterility of the pottle is not a requirement.\n\nAdditionally, your firm has outlined a plan with the following actions to be completed by December 1, 2024, which includes the following actions:\n\n(b)(4)\n\nBased on your firm's response there is an ambiguity in the definition of the term `pottle' and whether it is required to be sterile or not. (b)(4) your firm's response states that there is no risk for the stenle products manufactured at your facility because the BIs that they use conform to ISO 11138-1:2017 and ISO 11138-2:2017, and that they are in their sterile packaging until they are needed. However, the inspection demonstrated that your firm does not do any testing to verify that the BIs purchased for the purpose of demonstrating that terminal sterilization is achieved, are actually viable when they are used. Additionally, the inspection revealed that they do not capture key data such as BI batch number and expiration date, and thus if a BI falsely indicated that a sterilization was successful, there is no mechanism by which your firm can trace the lots of sterile products back to a failed BI.\n\nAdditionally, your firm did not include documentation or evidence of the corrections or corrective actions because they are in progress and have not been completed. Additionally, given the observations described above, your firm has not provided a commitment to conduct a retrospective assessment of all finished devices whose sterilization was verified using Biological Indicator (b)(4) to determine whether sterility was compromised.\n\n2. Failure to ensure that where the results of a process cannot be fully verified by subsequent inspection and test, the process shall be validated with a high degree of assurance and approved according to established procedures, as required by 21 CFR 820.75(a). For example:\n\n1) Your firm's ultrasonic cleaning process using the (b)(4) Cleaner (b)(4) is not adequately validated according to your firm's Manufacturing Process (b)(4). During the inspection, FDA's investigator revealed that the ultrasonic cleaning process was not adequately validated because critical details—such as the description of the NeoZoline Ventilation Tube (including part number, size, and shape), the number of validation batches (runs), validation batch size, and sample size used—were not documented.\n\n2) During the inspection, your firm stated that it had not validated the (b)(4) process for the NeoZoline Ventilation Tube (b)(4). Your firm stated that the (b)(4). Adept Medical also confirmed during the inspection that (b)(4) had not validated the NeoZoline Ventilation Tube (b)(4) and that prior to Spring 2023, (b)(4) the NeoZoline Ventilation Tube (b)(4) who also did not have a (b)(4) NeoZoline Ventilation Tube.\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates its Initial Action was completed on June 1, 2024. Your firm concluded that there is no risk to end users for products currently in supply and with distributors, based on the following factors:\n\nThere is an existing validated sterilization process indicating a sterility assurance level of (b)(4)\n\nAnnual bioburden results of pre-cleaned devices have bioburden levels below (b)(4) CFU.\n\nCurrent validation data, although not well documented in its sample selection and setting, still indicated the current setting provided adequate bioburden results, well within the capability of the sterilization process.\n\nAdditionally, your firm has outlined a plan to be completed by June 1, 2025, which includes the following actions:\n\n(b)(4)\n\nHowever, your firm has not provided any evidence to substantiate your claims that the (b)(4) sterility assurance level or the bioburden limits below (b)(4) CFU were consistently achievable. The inspection raised concerns about your firm sterilization process, as discussed in the above section regarding compliance with 21 CFR 820.80(a). It is noteworthy that FDA requested validation documents for the (b)(4) Cleaner during the May 2024 inspection and did not receive any documentation to indicate that this process was validated.\n\n3. Failure to establish and maintain procedures for implementing corrective and preventive action, as required by 21 CFR 820.100. For example:\n\nYour firm's Corrective and Preventive Action (CAPA) procedure (M05-03) fails to ensure that:\n\n1) The quality data is adequately analyzed to identify potential and existing causes of nonconformances or other quality issues. Your firm stated to the FDA investigator that, although data is analyzed, they do not evaluate the results to determine whether any corrective or preventive actions are necessary, as required by 21 CFR 820.100(a)(3).\n\n2) Your firm failed to adequately verify the effectiveness of corrective actions for several CAPAs before closing them. Specifically, CAPAs CA-459, CA-438, and CA-437 were closed after implementing corrective actions, but your firm did not verify the effectiveness of these actions, as required by 21 CFR 820.100(a)(4).\n\n3) CA-429 was closed on February 16, 2023; at the time of the inspection, your firm stated that they had not started any of the corrective actions identified in the CAPA. As a result of the discussion during the inspection, your firm volunteered to mark the CAPA as 'open,' so that the corrective actions could be implemented.\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that although procedure (b)(4) the procedure did not instruct how to this data should be analyzed, and what subsequent actions should be taken once the data analysis is complete. However, your firm's procedure (b)(4)\n\nYour firm has outlined the following plan to be completed by April 1, 2025, which includes the following actions:\n\n(b)(4)\n\nHowever, your firm's response does not identify conducting a retrospective analysis for all past CAPAs, to determine the impact of the lack of data analysis, and whether the appropriate corrective and\u002For preventive action was taken to address each CAPA's root cause. Additionally, your firm did not identify what actions it would take to address the lack of implementation of identified corrective actions and whether that issue is a systemic problem.\n\n4. Failure to establish and maintain procedures to control product that does not conform to specified requirements, including the identification, documentation, evaluation, segregation, and disposition of nonconforming product; and failure to ensure that the evaluation includes a determination of the need for an investigation, as required by 21 CFR 820.90(a). For example:\n\nThe FDA investigator reviewed six NC records related to your firm's NeoZoline Ventilation Tubes. All six NC records were closed (NC-2516, NC-2767, NC-2641, NC-2640, NC-2738, NC-2523), but showed the following deficiencies in documentation:\n\nThe NC records did not adequately document the evaluation of the identified nonconformities.\n\nThe rationale for not conducting related investigations was inadequately documented in all six NC records.\n\nYour firm explained that incoming NeoZoline Ventilation Tubes (b)(4) are not inspected upon arrival. (b)(4). Your firm further stated that they (b)(4). This target achievement was cited as the reason for not taking further action.\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that there is no risk to end users for products currently in supply and with distributors. That conclusion is based on postmarket surveillance data, which shows no product safety or performance complaints since the product's launch. However, a lack of documented safety signals does not ensure that nonconforming product was controlled and not introduced into commerce.\n\nAdditionally, your firm has outlined a plan to be completed by April 1, 2025, which includes the following actions:\n\n(b)(4)\n\nHowever, your firm did not include documentation to demonstrate that it has evaluated or will evaluate all past non-conformances against your new procedure to determine whether additional corrective action was required to address the non-conformances identified in your NC Records.\n\n5. Failure to define the type and extent of control to be exercised over the product, services, suppliers, contractors, and consultants, based on the evaluation results, as required by 21 CFR 820.50(a)(2). For example:\n\nDuring the inspection, your firm was asked whether the (b)(4) for the NeoZoline ventilation tubes was validated (b)(4). Your firm stated you have no knowledge or documentation regarding whether the (b)(4) for the NeoZoline Ventilation Tubes had been properly validated. (b)(4) Adept Medical learned the (b)(4) Adept Medical received (b)(4) units of NeoZoline Ventilation Tubes in various types from (b)(4) between June 2023 and November 2023. They released (b)(4) units ((b)(4) boxes) of the NeoZoline Ventilation Tubes to the United States. Prior to June 2023, all NeoZoline Ventilation Tubes were (b)(4). Adept has failed to ensure that the conditions of the supplier agreement were adhered to by your supplier.\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that there is no risk to the end users for products currently in supply and with distributors, based on the following considerations:\n\nThe post-market periodic safety update report (PSUR) on Ventilation Tubes supplied by (b)(4) indicated no adverse events.\n\n(b)(4)\n\nPost market surveillance data indicated we have had no product safety or performance complaints since product launch.\n\nHowever, a lack of adverse events in post market safety signals does not provide assurance that the device meets its design specifications, in light of the fact that, Adept Medical was unaware that your supplier (b)(4) the NeoZoline Ventilation Tube (b)(4) did not have any documentation that the (b)(4) device was validated.\n\nAdditionally, your firm has outlined a plan to be completed by June 1, 2025, which includes the following actions:\n\n(b)(4)\n\nHowever, based on your firm's response, it is unclear how you intend to evaluate suppliers' compliance with 21 CFR Part 820, the Quality System Regulation.\n\nOur inspection also revealed that the NeoZoline Ventilation Tubes are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PM_A) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, in that your firm did not notify FDA regarding a significant change or modification in the device that could significantly affect the safety or effectiveness of the device, as required by section 510(k) of the Act, 21 U.S.C. § 360(k), and 21 C.F.R. 807.81 (a)(3)(i).\n\nSpecifically, your firm has modified the NeoZoline Ventilation Tubes cleared under K061058. The modification involves the use of a (b)(4) which was not cleared in the original submission and is a change that could significantly affect the safety or effectiveness of the device. This modification necessitates a comprehensive risk assessment to ensure the device remains safe and effective. A new biocompatibility evaluation is required to determine if (b)(4). Any (b)(4) may affect how the device can be safely and effectively sterilized. Thus, your sterilization processes must be validated for the (b)(4) to ensure that it can be properly sterilized without (b)(4) becoming unsafe. The change in (b)(4) may alter the device's performance or specifications, so a thorough re-evaluation is necessary to ensure it still meets all necessary standards and functions as intended. Due to the (b)(4) modification and its potential impact on the device's safety and performance, a new 510(k) submission is required before marketing the modified device in the United States.\n\nFor a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the agency. [21 CFR 807.81(b)] The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fd efault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\n\nOther federal agencies may take your compliance with the FD&C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed.\n\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, including an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm's planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Please provide a translation of documentation not in English to facilitate our review. We will notify you regarding the adequacy of your firm's response(s) and the need to re-inspect your firm's facility to verify that the appropriate corrections and\u002For corrective actions have been made. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration as part of your response.\n\nYour firm's response should be sent via email to CDRHWarningLetterResponses@fda.hhs.gov or by mail to Food and Drug Administration, Center for Devices and Radiological Health, Office of Regulatory Programs, Division of Regulatory Programs 2, FDA Regulatory Inspections and Audits Team, White Oak Building 66, 10903 New Hampshire Ave., Silver Spring, MD 20993. Refer to CMS case #692226 when replying. If you have any questions about the contents of this letter, please contact: Shu-Chen Peng, Ph.D. at 301-796-6481.\n\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm's facility. It is your firm's responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm's manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\n\nSincerely yours,\n\n\u002FS\u002F\n\nMalvina B. Eydelman, M.D.\n\nDirector\n\nOHT1: Office of Ophthalmic, Anesthesia,\n\nRespiratory, ENT and Dental Devices\n\nOffice of Product Evaluation and Quality\n\nCenter for Devices and Radiological Health\n\nCC:\n\n(b)(4), Registrar Corp.,\n\n144 Research Drive,\n\nHampton, Virginia,\n\nUSA 23666\n\nPhone: Tel: 1-757-224-0177, Ext. (b)(4)\n\nEmail:(b)(4)@registrarcorp.com","Adept Medical Ltd.","adept-medical-ltd-692226-10112024","2026-08-18T06:42:28.856152+00:00","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fadept-medical-ltd-692226-10112024","2026-10-26T08:07:50.120298+00:00","2024-11-26","692226","Medical Devices","Mr. Murray Fenton","2026-08-19T17:57:49.713+00:00","2024-10-11",2,{"510k":56,"classification":57,"enforcement":58,"event":59,"event_backfill":60,"pma":61,"warning_letter":62},"2026-11-16T02:00:55.89+00:00","2026-11-16T02:00:41.999+00:00","2026-11-16T02:00:49.415+00:00","2026-11-18T04:00:44.748+00:00","2026-09-07T05:17:28.839+00:00","2026-11-16T02:01:03.155+00:00","2026-11-17T01:02:55.859+00:00"]