[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"fda-warning-letters-search:[\"Advance Medical Designs, Inc.\",\"\",\"\",\"\",\"\",1]":3,"fda-latest-sync-dates":94},{"warningLetters":4,"total":93},[5,31,52,75],{"id":6,"raw":7,"subject":12,"body_html":14,"body_text":15,"firm_name":16,"letter_id":17,"created_at":18,"fei_number":19,"letter_url":20,"updated_at":21,"action_type":22,"case_status":23,"posted_date":24,"marcs_cms_no":25,"product_type":26,"closeout_date":19,"issuing_office":11,"recipient_name":27,"body_fetched_at":28,"delivery_method":29,"recipient_title":19,"reference_number":19,"action_taken_date":30,"medical_device_id":19,"response_letter_date":19},544,[8,9,10,11,12,13,13,13],"\u003Ctime datetime=\"2025-10-07T04:00:00Z\">10\u002F07\u002F2025\u003C\u002Ftime>\n","\u003Ctime datetime=\"2025-09-26T04:00:00Z\">09\u002F26\u002F2025\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Ftechnological-medical-advancements-llc-712715-09262025\">Technological Medical Advancements LLC\u003C\u002Fa>","Center for Devices and Radiological Health","CGMP\u002FQSR\u002FMedical Devices\u002FAdulterated","","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>VIA Electronic Mail\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Dr. Bruce R. Coren, DVM, MS\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>Chief Executive Officer\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Technological Medical Advancements LLC\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>1601 Belvedere Rd Ste E-180\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>West Palm Beach\u003C\u002Fspan>, \u003Cspan>FL\u003C\u002Fspan> \u003Cspan>33406-1541\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:bcoren@diowavelaser.com\"> bcoren@diowavelaser.com \u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>CMS # 712715\u003C\u002Fp>\u003Cp>September 26, 2025\u003C\u002Fp>\u003Cp>Dear Dr. Coren:&nbsp;\u003C\u002Fp>\u003Cp>During an inspection of your firm located in West Palm Beach, Florida from April 9, 2025, through April 21, 2025, investigators from the United States Food and Drug Administration (FDA) determined that your firm manufactures the Diowave 250 WLS and Diowave 100 WLS laser system. Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.&nbsp;\u003C\u002Fp>\u003Cp>\u003Cstrong>\u003Cu>Unapproved Device Violations\u003C\u002Fu>\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>FDA has reviewed the information collected during the April 2025 inspection and information on your firm’s website at www.diowavelaser.com (last accessed on July 1, 2025). FDA has reviewed the Physician Brochure (TMA, Physician Brochure, February 2024), AI Instructions for Use (TMA, Diowave 100 WLS &amp; Diowave 250 WLS, IMPOS-AI User Instructions, Undated, 1 page.pdf ), Diowave Life Without Pain Brochure (Diowave Laser Treatment Center, Imagine Life Without Pain Brochure), and an Operating Manual (TWA, Diowave Stealth Micro-Pulse Laser System Operating Manual Version 2024-5), and has determined that the Diowave 100 WLS and Diowave 250 WLS devices are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B) because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption (IDE) under section 520(g) of the Act, 21 U.S.C. § 360j(g) for the device as described and marketed. The Diowave 100 WLS and Diowave 250 WLS devices are also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the devices into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C. §360(k). Specifically, the Diowave 100 WLS and the Diowave 250 WLS are in violation of the Act for the reasons discussed below.\u003C\u002Fp>\u003Cp>\u003Cstrong>Technological Characteristics:\u003C\u002Fstrong> Devices classified under 21 CFR 890.5500 Infrared Lamp are devices intended for medical purposes that emits energy at infrared frequencies to provide topical heating and are exempt from premarket notification requirements unless they exceed the limitations on exemption at 21 CFR 890.9. However, there is evidence that the Diowave 250 WLS and Diowave 100 WLS operate using a different fundamental scientific technology than that generic type of device. Specifically, your firm’s Care Provider Brochure states that “\u003Cem>all heat during a stealth treatment is inhibited, allowing for deep penetration as there is no heat during treatment\u003C\u002Fem>.” Further, the Diowave 100 WLS and Diowave 250 WLS appear to utilize stealth micro-pulse laser technology, which does not provide topical heating. For example, your distribution includes materials with claims such as:\u003C\u002Fp>\u003Cp>\u003Cem>o\u003C\u002Fem>&nbsp;\u003Cem> “Diowave is pleased to reveal the Stealth Micro-Pulsed Laser System™. SMPLTallows you to hold a hand piece static over a focal pathology without heating tissue..”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“Our Stealth Micro-Pulse Technology allows care providers to treat various pathologies by Micro-Pulsing at appropriate power levels without introducing heat.”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“The Doctor can remove all heat from the laser beam allowing him to hold thelaser directly over the injury for an indefinite amount of time.”\u003C\u002Fem>\u003C\u002Fp>\u003Cp>As shown by the evidence, the Diowave 100 WLS and Diowave 250 WLS devices do not provide topical heating. Instead, they use a different fundamental scientific technology. Therefore, the premarket notification requirements apply.\u003C\u002Fp>\u003Cp>\u003Cstrong>Intended Use:\u003C\u002Fstrong>\u003Cbr>Generic devices classified under 21 CFR 890.5500 emit energy at infrared frequencies (approximately 700 to 50,000 nanometers) to provide topical heating and are intended for medical purposes including, but not limited to, temporary increase in local blood circulation and temporary relief of: muscle spasms, minor joint pain and stiffness, minor muscle pain and stiffness, and minor arthritis pain. Devices classified under 21 CFR 890.5500 are exempt from premarket notification unless they exceed the limitations on exemption at 21 CFR 890.9(a). However, there is evidence that the Diowave 250 WLS and Diowave 100 WLS are intended for uses that are different from the intended use of the type of devices classified under 21 CFR 890.5500 Infrared Lamp. For example, your distribution of the Diowave 100 WLS and Diowave 250 WLS devices includes the following claims:\u003C\u002Fp>\u003Cp>\u003Cem>o &nbsp;“a painless, non-surgical, and side-effective way to treat conditions previously refractive to traditional medical care”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“treatment of various pathologies, including those refractive to traditional therapy”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“Because laser therapy is the only treatment in medicine that actually heals living tissue, most conditions respond favorably to repeated laser therapy treatments. It has been proven to deliver results when all other forms of insurance-based medicine have failed.”&nbsp;&nbsp;\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“This technology has shown great promise in healing conditions which are refractive or non-responsive to all other forms of treatment and surgery, including HPLT [High Power Laser Therapy]”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“peripheral neuropathy” case study: “An 80-year-old male with advance circulatory disease in his lower extremities presents with numbness in his feet and toes. He cannot drive because he cannot feel his feet…by the end of 12 visits, his proprioception to the bottom of his feet returned”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“Summation of Various Main Treatment Indications for Diowave:…abdominalpain, pelvic pain, wound care”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“Difficult to treat pathologies that are adequately treated by Diowave: post-surgical pain, implantable device pocket pain, surgically fused areas in which insurance will not cover further treatment, areas that do not respond well to nerve blocks or joint injections, “disc pathology, wounds refractory to conventional medical treatment, after regenerative medicine treatment: using laser to amplify effects of regenerative medicine treatments by kickstarting the process.”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“results come from the laser’s ability to stimulate tissue growth and repair…results in accelerated wound healing with a dramatic decrease in…inflammation, and scar tissue formation”\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Further, we note that your firm has an existing clearance (K121363) under 21 CFR 890.5500 with the following indications:\u003C\u002Fp>\u003Cp>\u003Cem>“The Diowave Laser System is intended to emit energy in the infrared spectrum to provide topical heating for the purpose of elevating tissue temperature for temporary relief of minor muscle and joint pain, muscle spasm, pain and stiffness associated with minor arthritis, promoting relaxation of muscle tissue, and to temporarily increase local blood circulation.”\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Your firm’s promotion of the device provides evidence that the device is intended for conditions beyond the indications for which it was cleared. Examples of these claims are included above. This constitutes a major change or modification in the intended use. Thus, a new premarket notification is required. Additionally, your firm’s promotion of the device provides evidence that your firm made a technological change to the device that could significantly affect the safety or effectiveness of the device. Examples of these claims are included above. This change is a significant change or modification for which a new premarket notification is required.\u003C\u002Fp>\u003Cp>For a device requiring premarket approval, the notification required by section 510(k) of the Act, 21 U.S.C. § 360(k), is deemed satisfied when a PMA is pending before the agency. 21 CFR 807.81(b). The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fd efault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\u003C\u002Fp>\u003Cp>Our office requests that Technological Medical Advancements LLC cease any activities that result in the misbranding or adulteration of the Diowave 100 WLS and Diowave 250 WLS devices, such as the commercial distribution of the device, for the uses discussed above.\u003C\u002Fp>\u003Cp>\u003Cstrong>\u003Cu>Quality System Regulation Violations\u003C\u002Fu>\u003C\u002Fstrong>\u003Cbr>This inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, \u003Cu>Code of Federal Regulations\u003C\u002Fu> (CFR), Part 820. Your firm’s response dated May 23, 2025, to the Form FDA 483 (FDA 483) was not received within fifteen business days of issuance of the FDA 483 however we performed a review of your response. These violations include, but are not limited to, the following:\u003C\u002Fp>\u003Cp>1. Failure to adequately establish procedures to ensure that all purchased or otherwise received products and services conform to specified requirements, as required by 21 CFR 820.50.Specifically,\u003C\u002Fp>\u003Cp>A. Your firm has failed to perform supplier evaluations as required by Purchasing Control Standard Operating Procedure, TMAQSP007, Revision 2.0. These include evaluations for critical suppliers, comprised of your contract manufacturer and designer \u003Cstrong>(b)(4)\u003C\u002Fstrong> and your contract service firm \u003Cstrong>(b)(4)\u003C\u002Fstrong>, as required by Section 3 of your procedure. Additionally, no \u003Cstrong>(b)(4)\u003C\u002Fstrong> evaluations were conducted for any suppliers despite procedural requirements, and no justification was provided for not performing them.\u003C\u002Fp>\u003Cp>B. Your firm failed to maintain supplier agreements as required by your Supplier Evaluation and Monitoring Standard Operating Procedure, TMA_QSP_023. For example, section 6.1.2 of your procedure states that “a Quality Agreement\u002FCritical Supplier Quality Agreement is drafted and signed between both parties.” However, your firm has unsigned agreements with your contract manufacturer, including both the Critical Supplier Quality Agreement and Software Agreement. During the inspection, your contract manufacturer was unable to provide required design control records for review.\u003C\u002Fp>\u003Cp>C. The inspection noted that your firm failed to have adequate purchasing controls and supplier oversight of your firm’s contract manufacturer, \u003Cstrong>(b)(4)\u003C\u002Fstrong>, responsible for design controls. Your firm's inability to retrieve basic design control records from your contract designer\u002Fmanufacturer during the FDA inspection, despite claims that these documents existed, demonstrates inadequate oversight of critical supplier activities. For example:\u003C\u002Fp>\u003Cp>i. &nbsp;Your firm could not provide the Design History File (DHF) records for the Diowave 250 WLS and Diowave 100 WLS medical devices. The inspection found no evidence of essential design control records including design planning, design inputs, design outputs, design reviews, design verification, design validation, design change or design transfer, representing a comprehensive failure to maintain adequate design control records as required by FDA regulations. As such, FDA is concerned that the medical devices will not consistently meet intended use and safety requirements, that design changes are not properly controlled and documented, and that the finished device design may not meet user needs and intended use.\u003C\u002Fp>\u003Cp>ii. &nbsp;The design risk management files for the Diowave 250 WLS and Diowave 100WLS laser device were not available for review. No records were available toreview by FDA investigators for design risk analysis despite your proceduralrequirements in section 3.4 of Risk Management Standard Operating Procedure,TMAQSP043, Revision 1.0, to incorporate risk analysis into your firm’s DesignReview. No risk assessment was available for review for the power increase from \u003Cstrong>(b)(4)\u003C\u002Fstrong>W to \u003Cstrong>(b)(4)\u003C\u002Fstrong>W. No evaluation on the potential need to submit a new premarket application was performed.\u003C\u002Fp>\u003Cp>iii. &nbsp;Your firm’s Supplier Evaluation and Monitoring Standard OperatingTMA_QSP_023, Revision 1 states in section 6.2 that “\u003Cstrong>(b)(4)\u003C\u002Fstrong>. ”There have been significant modifications to your devices without notification from critical supplier or oversight and approval of changes by your firm. This includes the review of design control records such as design verification and design validation to include risk analysis. For example, design control records for changes to software (\u003Cstrong>(b)(4)\u003C\u002Fstrong> for 250 WLS, \u003Cstrong>(b)(4)\u003C\u002Fstrong> for 100 WLS), as well as an identified power increase for the Diowave laser systems from \u003Cstrong>(b)(4)\u003C\u002Fstrong>W to \u003Cstrong>(b)(4)\u003C\u002Fstrong>W were not available for review during the inspection.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Your firm’s response does not address deficiencies with the purchasing controls and oversight of the design control activities delegated to your contract manufacturer. In addition, while your firm provided some design control records from your contract manufacturer, \u003Cstrong>(b)(4)\u003C\u002Fstrong>, you did not provide records that include the changes to the Diowave Laser System 100 WLS\u002F250 WLS or design inputs, and therefore, we are unable determine if the device design outputs meet the design inputs. The design output records provided are missing complete device specifications, manufacturing specifications, software design specifications and labeling specifications. The design review documents are missing design reviews for all phases of the device design plan. There is no design change control for design changes previously described. The design transfer document does not include all required design transfer activities and any manufacturing process validations performed. Following our review of your response, you have not addressed the deficiencies in your firm’s design control subsystem and the requirement for a complete design history file (DHF) for your medical devices.\u003C\u002Fp>\u003Cp>2. Failure to establish and maintain procedures for receiving, reviewing, and evaluating complaints by a formally designated unit and to maintain complaint files, as required by 21CFR 820.198(a). For example:\u003C\u002Fp>\u003Cp>A. FDA investigators reviewed ten complaints from 2025 and identified comprehensive procedural failures for the receipt, review, and evaluation of complaints. Your firm failed to implement Customer Complaints procedure, TMAQSP003, Revision 3.0,and perform required procedural activities for all complaints reviewed, including complaint investigations, failure mode analysis, Management Representative approval, and completing all fields in the complaint forms.\u003C\u002Fp>\u003Cp>B. Your firm failed to handle all complaints in a timely manner. For example, your firm has not reviewed or evaluated \u003Cstrong>(b)(4)\u003C\u002Fstrong> servicing records from the third-party supplier as specified by your procedure TMA_QSP_009 Servicing, Rev 2.0, so that the Management Representative can determine if they meet the definition of a complaint so that they can be investigated as necessary.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address this inspectional observation, and therefore is missing a corrective action plan, time frames for implementation, and documentation of activities performed to correct the underlying deficiency.\u003C\u002Fp>\u003Cp>3. Your firm has failed to adequately establish and maintain procedures for corrective and preventive action, as required by 21 CFR 820.100(a). Specifically, your firm has not adequately established CAPA Procedure, TMAQSP012, Revision 1.0. For example:\u003C\u002Fp>\u003Cp>A. Your procedure lacks requirements for analyzing processes, work operations, concessions, quality audit reports, quality records, service records, complaints, returned product, and other sources of quality data to identify existing and potential causes of nonconforming product, or other quality problems.\u003C\u002Fp>\u003Cp>B. Your firm has not implemented Section 3.2 of the CAPA procedure to identify actions needed to correct and prevent the recurrence of any non-conformity. For example, your firm has not opened any corrective and preventive actions, as required by your procedure, after it has been cited with the following:\u003C\u002Fp>\u003Cp>&nbsp; i. Fourteen inspectional observations from an FDA inspection conducted from August 4, 2021, to September 9, 2021;\u003Cbr>&nbsp; ii. Thirteen observations, along with seven verbal observations, from an FDA inspection conducted from February 19, 2020 to February 24, 2020;\u003Cbr>&nbsp; iii. Twelve violations cited in a letter sent to your firm on June 8, 2020, by FDA.\u003C\u002Fp>\u003Cp>This FDA inspection, along with previous FDA inspections, have identified repeat systemic deficiencies of your firm’s inability to identify actions to correct and prevent the recurrence of quality problems.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\u003C\u002Fp>\u003Cp>4. Your firm has failed to establish and maintain adequate procedures for quality audits, as required by 21 CFR 820.22. Specifically, your firm did not conduct quality audits in 2023and 2024 as required by your Internal Audit Standard Operating Procedure, TMAQSP004,Revision 1.0. As of the date of the inspection, no quality audit has been conducted in 2025.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\u003C\u002Fp>\u003Cp>5. Your firm has failed to establish procedures to control product that does not conform to specified requirements, as required by 21 CFR 820.90(a). Specifically, your firm does not have a procedure for addressing nonconforming products or materials. When the FDA investigator asked about procedures for nonconforming products or materials, you stated that such procedures did not exist. Without procedures to define nonconformance criteria and disposition processes, your firm cannot effectively identify or manage quality issues that may arise during manufacturing, incoming inspection, acceptance testing activities or as part of post-market surveillance activities.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\u003C\u002Fp>\u003Cp>6. Your firm has failed to adequately establish and maintain procedures for management review, as required by 21 CFR 820.20(c). Specifically, your firm did not follow Management Review Standard Operating Procedure, TMAQSP010, Revision 1.0, which requires periodic management review at least \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm did not conduct a management review in 2024, thereby failing to determine the effectiveness of your quality system. This inspection identified several inspectional observations and deficiencies that have gone uncorrected from the two previous FDA inspections or approximately 5 years.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\u003C\u002Fp>\u003Cp>\u003Cstrong>\u003Cu>Unique Device Identifier Regulation (UDI) Violations\u003C\u002Fu>\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>The inspection revealed that your devices are misbranded within the meaning of section 502(c) of the Act, 21 U.S.C. § 352(c), because a word, statement, or other information required by or under authority of section 519 of the Act, 21 U.S.C. § 360i, to appear on the label or labeling of the devices was not prominently placed thereon with such conspicuousness (as compared with other words, statements, designs, or devices, in the labeling) and in such terms as to render it likely to be read and understood by the ordinary individual under customary conditions of purchase and use. In particular, 21 CFR 801.20(a) – which was promulgated under authority of section 519 of the Act, among other provisions – requires, with exceptions not relevant here, that the label and device package of every medical device bear a unique device identifier (UDI) that meets the requirements of 21 CFR Part 801, subpart B, and 21 CFR Part 830. The labels of the Diowave Pure Pulse Laser System devices do not bear such a UDI.\u003C\u002Fp>\u003Cp>Specifically, the labels for Diowave Pure Pulse Laser System devices do not include a device identifier within the meaning of 21 CFR 801.3 or 830.3, and there is no UDI presented in easily readable plain-text on the label of the device (see 21 CFR 801.40(a)(1)), and there is no UDI presented in machine-readable form that uses automatic identification and data capture (AIDC) technology on the label of the device (see 21 CFR 801.40(a)(2)).\u003C\u002Fp>\u003Cp>A follow-up inspection will be required to assure that corrections and\u002For corrective actions are adequate. Your firm should take prompt action to address any violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\u003C\u002Fp>\u003Cp>Other federal agencies may take your compliance with the FD&amp;C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\u003C\u002Fp>\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\u003Cp>Your firm’s response should be sent via email to Melissa Michurski, Assistant Director at CDRHEnforcement@fda.hhs.gov. Please include in the subject line, “CMS Case 712715” when replying. If you have any questions about the contents of this letter, please contact: Rafael Padilla at Rafael.Padilla@FDA.hhs.gov.\u003C\u002Fp>\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\u003C\u002Fp>\u003Cp>Sincerely,\u003Cbr>\u002FS\u002F\u003C\u002Fp>\u003Cp>Barbara C. Marsden\u003Cbr>Acting Director\u003Cbr>Office of Regulatory Programs\u003Cbr>Office of Product Evaluation and Quality\u003Cbr>Center for Devices and Radiological Health\u003C\u002Fp>\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVIA Electronic Mail\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nDr. Bruce R. Coren, DVM, MS\n\nRecipient Title\n\nChief Executive Officer\n\nTechnological Medical Advancements LLC\n\n1601 Belvedere Rd Ste E-180\n\nWest Palm Beach, FL 33406-1541\n\nUnited States\n\nbcoren@diowavelaser.com\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nWARNING LETTER\nCMS # 712715\nSeptember 26, 2025\nDear Dr. Coren:\nDuring an inspection of your firm located in West Palm Beach, Florida from April 9, 2025, through April 21, 2025, investigators from the United States Food and Drug Administration (FDA) determined that your firm manufactures the Diowave 250 WLS and Diowave 100 WLS laser system. Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\nUnapproved Device Violations\nFDA has reviewed the information collected during the April 2025 inspection and information on your firm’s website at www.diowavelaser.com (last accessed on July 1, 2025). FDA has reviewed the Physician Brochure (TMA, Physician Brochure, February 2024), AI Instructions for Use (TMA, Diowave 100 WLS & Diowave 250 WLS, IMPOS-AI User Instructions, Undated, 1 page.pdf ), Diowave Life Without Pain Brochure (Diowave Laser Treatment Center, Imagine Life Without Pain Brochure), and an Operating Manual (TWA, Diowave Stealth Micro-Pulse Laser System Operating Manual Version 2024-5), and has determined that the Diowave 100 WLS and Diowave 250 WLS devices are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B) because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption (IDE) under section 520(g) of the Act, 21 U.S.C. § 360j(g) for the device as described and marketed. The Diowave 100 WLS and Diowave 250 WLS devices are also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the devices into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C. §360(k). Specifically, the Diowave 100 WLS and the Diowave 250 WLS are in violation of the Act for the reasons discussed below.\nTechnological Characteristics: Devices classified under 21 CFR 890.5500 Infrared Lamp are devices intended for medical purposes that emits energy at infrared frequencies to provide topical heating and are exempt from premarket notification requirements unless they exceed the limitations on exemption at 21 CFR 890.9. However, there is evidence that the Diowave 250 WLS and Diowave 100 WLS operate using a different fundamental scientific technology than that generic type of device. Specifically, your firm’s Care Provider Brochure states that “all heat during a stealth treatment is inhibited, allowing for deep penetration as there is no heat during treatment.” Further, the Diowave 100 WLS and Diowave 250 WLS appear to utilize stealth micro-pulse laser technology, which does not provide topical heating. For example, your distribution includes materials with claims such as:\no “Diowave is pleased to reveal the Stealth Micro-Pulsed Laser System™. SMPLTallows you to hold a hand piece static over a focal pathology without heating tissue..”\no “Our Stealth Micro-Pulse Technology allows care providers to treat various pathologies by Micro-Pulsing at appropriate power levels without introducing heat.”\no “The Doctor can remove all heat from the laser beam allowing him to hold thelaser directly over the injury for an indefinite amount of time.”\nAs shown by the evidence, the Diowave 100 WLS and Diowave 250 WLS devices do not provide topical heating. Instead, they use a different fundamental scientific technology. Therefore, the premarket notification requirements apply.\nIntended Use:\nGeneric devices classified under 21 CFR 890.5500 emit energy at infrared frequencies (approximately 700 to 50,000 nanometers) to provide topical heating and are intended for medical purposes including, but not limited to, temporary increase in local blood circulation and temporary relief of: muscle spasms, minor joint pain and stiffness, minor muscle pain and stiffness, and minor arthritis pain. Devices classified under 21 CFR 890.5500 are exempt from premarket notification unless they exceed the limitations on exemption at 21 CFR 890.9(a). However, there is evidence that the Diowave 250 WLS and Diowave 100 WLS are intended for uses that are different from the intended use of the type of devices classified under 21 CFR 890.5500 Infrared Lamp. For example, your distribution of the Diowave 100 WLS and Diowave 250 WLS devices includes the following claims:\no “a painless, non-surgical, and side-effective way to treat conditions previously refractive to traditional medical care”\no “treatment of various pathologies, including those refractive to traditional therapy”\no “Because laser therapy is the only treatment in medicine that actually heals living tissue, most conditions respond favorably to repeated laser therapy treatments. It has been proven to deliver results when all other forms of insurance-based medicine have failed.”\no “This technology has shown great promise in healing conditions which are refractive or non-responsive to all other forms of treatment and surgery, including HPLT [High Power Laser Therapy]”\no “peripheral neuropathy” case study: “An 80-year-old male with advance circulatory disease in his lower extremities presents with numbness in his feet and toes. He cannot drive because he cannot feel his feet…by the end of 12 visits, his proprioception to the bottom of his feet returned”\no “Summation of Various Main Treatment Indications for Diowave:…abdominalpain, pelvic pain, wound care”\no “Difficult to treat pathologies that are adequately treated by Diowave: post-surgical pain, implantable device pocket pain, surgically fused areas in which insurance will not cover further treatment, areas that do not respond well to nerve blocks or joint injections, “disc pathology, wounds refractory to conventional medical treatment, after regenerative medicine treatment: using laser to amplify effects of regenerative medicine treatments by kickstarting the process.”\no “results come from the laser’s ability to stimulate tissue growth and repair…results in accelerated wound healing with a dramatic decrease in…inflammation, and scar tissue formation”\nFurther, we note that your firm has an existing clearance (K121363) under 21 CFR 890.5500 with the following indications:\n“The Diowave Laser System is intended to emit energy in the infrared spectrum to provide topical heating for the purpose of elevating tissue temperature for temporary relief of minor muscle and joint pain, muscle spasm, pain and stiffness associated with minor arthritis, promoting relaxation of muscle tissue, and to temporarily increase local blood circulation.”\nYour firm’s promotion of the device provides evidence that the device is intended for conditions beyond the indications for which it was cleared. Examples of these claims are included above. This constitutes a major change or modification in the intended use. Thus, a new premarket notification is required. Additionally, your firm’s promotion of the device provides evidence that your firm made a technological change to the device that could significantly affect the safety or effectiveness of the device. Examples of these claims are included above. This change is a significant change or modification for which a new premarket notification is required.\nFor a device requiring premarket approval, the notification required by section 510(k) of the Act, 21 U.S.C. § 360(k), is deemed satisfied when a PMA is pending before the agency. 21 CFR 807.81(b). The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fd efault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\nOur office requests that Technological Medical Advancements LLC cease any activities that result in the misbranding or adulteration of the Diowave 100 WLS and Diowave 250 WLS devices, such as the commercial distribution of the device, for the uses discussed above.\nQuality System Regulation Violations\nThis inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. Your firm’s response dated May 23, 2025, to the Form FDA 483 (FDA 483) was not received within fifteen business days of issuance of the FDA 483 however we performed a review of your response. These violations include, but are not limited to, the following:\n1. Failure to adequately establish procedures to ensure that all purchased or otherwise received products and services conform to specified requirements, as required by 21 CFR 820.50.Specifically,\nA. Your firm has failed to perform supplier evaluations as required by Purchasing Control Standard Operating Procedure, TMAQSP007, Revision 2.0. These include evaluations for critical suppliers, comprised of your contract manufacturer and designer (b)(4) and your contract service firm (b)(4), as required by Section 3 of your procedure. Additionally, no (b)(4) evaluations were conducted for any suppliers despite procedural requirements, and no justification was provided for not performing them.\nB. Your firm failed to maintain supplier agreements as required by your Supplier Evaluation and Monitoring Standard Operating Procedure, TMA_QSP_023. For example, section 6.1.2 of your procedure states that “a Quality Agreement\u002FCritical Supplier Quality Agreement is drafted and signed between both parties.” However, your firm has unsigned agreements with your contract manufacturer, including both the Critical Supplier Quality Agreement and Software Agreement. During the inspection, your contract manufacturer was unable to provide required design control records for review.\nC. The inspection noted that your firm failed to have adequate purchasing controls and supplier oversight of your firm’s contract manufacturer, (b)(4), responsible for design controls. Your firm's inability to retrieve basic design control records from your contract designer\u002Fmanufacturer during the FDA inspection, despite claims that these documents existed, demonstrates inadequate oversight of critical supplier activities. For example:\ni. Your firm could not provide the Design History File (DHF) records for the Diowave 250 WLS and Diowave 100 WLS medical devices. The inspection found no evidence of essential design control records including design planning, design inputs, design outputs, design reviews, design verification, design validation, design change or design transfer, representing a comprehensive failure to maintain adequate design control records as required by FDA regulations. As such, FDA is concerned that the medical devices will not consistently meet intended use and safety requirements, that design changes are not properly controlled and documented, and that the finished device design may not meet user needs and intended use.\nii. The design risk management files for the Diowave 250 WLS and Diowave 100WLS laser device were not available for review. No records were available toreview by FDA investigators for design risk analysis despite your proceduralrequirements in section 3.4 of Risk Management Standard Operating Procedure,TMAQSP043, Revision 1.0, to incorporate risk analysis into your firm’s DesignReview. No risk assessment was available for review for the power increase from (b)(4)W to (b)(4)W. No evaluation on the potential need to submit a new premarket application was performed.\niii. Your firm’s Supplier Evaluation and Monitoring Standard OperatingTMA_QSP_023, Revision 1 states in section 6.2 that “(b)(4). ”There have been significant modifications to your devices without notification from critical supplier or oversight and approval of changes by your firm. This includes the review of design control records such as design verification and design validation to include risk analysis. For example, design control records for changes to software ((b)(4) for 250 WLS, (b)(4) for 100 WLS), as well as an identified power increase for the Diowave laser systems from (b)(4)W to (b)(4)W were not available for review during the inspection.\nWe reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Your firm’s response does not address deficiencies with the purchasing controls and oversight of the design control activities delegated to your contract manufacturer. In addition, while your firm provided some design control records from your contract manufacturer, (b)(4), you did not provide records that include the changes to the Diowave Laser System 100 WLS\u002F250 WLS or design inputs, and therefore, we are unable determine if the device design outputs meet the design inputs. The design output records provided are missing complete device specifications, manufacturing specifications, software design specifications and labeling specifications. The design review documents are missing design reviews for all phases of the device design plan. There is no design change control for design changes previously described. The design transfer document does not include all required design transfer activities and any manufacturing process validations performed. Following our review of your response, you have not addressed the deficiencies in your firm’s design control subsystem and the requirement for a complete design history file (DHF) for your medical devices.\n2. Failure to establish and maintain procedures for receiving, reviewing, and evaluating complaints by a formally designated unit and to maintain complaint files, as required by 21CFR 820.198(a). For example:\nA. FDA investigators reviewed ten complaints from 2025 and identified comprehensive procedural failures for the receipt, review, and evaluation of complaints. Your firm failed to implement Customer Complaints procedure, TMAQSP003, Revision 3.0,and perform required procedural activities for all complaints reviewed, including complaint investigations, failure mode analysis, Management Representative approval, and completing all fields in the complaint forms.\nB. Your firm failed to handle all complaints in a timely manner. For example, your firm has not reviewed or evaluated (b)(4) servicing records from the third-party supplier as specified by your procedure TMA_QSP_009 Servicing, Rev 2.0, so that the Management Representative can determine if they meet the definition of a complaint so that they can be investigated as necessary.\nWe reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address this inspectional observation, and therefore is missing a corrective action plan, time frames for implementation, and documentation of activities performed to correct the underlying deficiency.\n3. Your firm has failed to adequately establish and maintain procedures for corrective and preventive action, as required by 21 CFR 820.100(a). Specifically, your firm has not adequately established CAPA Procedure, TMAQSP012, Revision 1.0. For example:\nA. Your procedure lacks requirements for analyzing processes, work operations, concessions, quality audit reports, quality records, service records, complaints, returned product, and other sources of quality data to identify existing and potential causes of nonconforming product, or other quality problems.\nB. Your firm has not implemented Section 3.2 of the CAPA procedure to identify actions needed to correct and prevent the recurrence of any non-conformity. For example, your firm has not opened any corrective and preventive actions, as required by your procedure, after it has been cited with the following:\ni. Fourteen inspectional observations from an FDA inspection conducted from August 4, 2021, to September 9, 2021;\nii. Thirteen observations, along with seven verbal observations, from an FDA inspection conducted from February 19, 2020 to February 24, 2020;\niii. Twelve violations cited in a letter sent to your firm on June 8, 2020, by FDA.\nThis FDA inspection, along with previous FDA inspections, have identified repeat systemic deficiencies of your firm’s inability to identify actions to correct and prevent the recurrence of quality problems.\nWe reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\n4. Your firm has failed to establish and maintain adequate procedures for quality audits, as required by 21 CFR 820.22. Specifically, your firm did not conduct quality audits in 2023and 2024 as required by your Internal Audit Standard Operating Procedure, TMAQSP004,Revision 1.0. As of the date of the inspection, no quality audit has been conducted in 2025.\nWe reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\n5. Your firm has failed to establish procedures to control product that does not conform to specified requirements, as required by 21 CFR 820.90(a). Specifically, your firm does not have a procedure for addressing nonconforming products or materials. When the FDA investigator asked about procedures for nonconforming products or materials, you stated that such procedures did not exist. Without procedures to define nonconformance criteria and disposition processes, your firm cannot effectively identify or manage quality issues that may arise during manufacturing, incoming inspection, acceptance testing activities or as part of post-market surveillance activities.\nWe reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\n6. Your firm has failed to adequately establish and maintain procedures for management review, as required by 21 CFR 820.20(c). Specifically, your firm did not follow Management Review Standard Operating Procedure, TMAQSP010, Revision 1.0, which requires periodic management review at least (b)(4). Your firm did not conduct a management review in 2024, thereby failing to determine the effectiveness of your quality system. This inspection identified several inspectional observations and deficiencies that have gone uncorrected from the two previous FDA inspections or approximately 5 years.\nWe reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\nUnique Device Identifier Regulation (UDI) Violations\nThe inspection revealed that your devices are misbranded within the meaning of section 502(c) of the Act, 21 U.S.C. § 352(c), because a word, statement, or other information required by or under authority of section 519 of the Act, 21 U.S.C. § 360i, to appear on the label or labeling of the devices was not prominently placed thereon with such conspicuousness (as compared with other words, statements, designs, or devices, in the labeling) and in such terms as to render it likely to be read and understood by the ordinary individual under customary conditions of purchase and use. In particular, 21 CFR 801.20(a) – which was promulgated under authority of section 519 of the Act, among other provisions – requires, with exceptions not relevant here, that the label and device package of every medical device bear a unique device identifier (UDI) that meets the requirements of 21 CFR Part 801, subpart B, and 21 CFR Part 830. The labels of the Diowave Pure Pulse Laser System devices do not bear such a UDI.\nSpecifically, the labels for Diowave Pure Pulse Laser System devices do not include a device identifier within the meaning of 21 CFR 801.3 or 830.3, and there is no UDI presented in easily readable plain-text on the label of the device (see 21 CFR 801.40(a)(1)), and there is no UDI presented in machine-readable form that uses automatic identification and data capture (AIDC) technology on the label of the device (see 21 CFR 801.40(a)(2)).\nA follow-up inspection will be required to assure that corrections and\u002For corrective actions are adequate. Your firm should take prompt action to address any violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\nOther federal agencies may take your compliance with the FD&C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration as part of your response.\nYour firm’s response should be sent via email to Melissa Michurski, Assistant Director at CDRHEnforcement@fda.hhs.gov. Please include in the subject line, “CMS Case 712715” when replying. If you have any questions about the contents of this letter, please contact: Rafael Padilla at Rafael.Padilla@FDA.hhs.gov.\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\nSincerely,\n\u002FS\u002F\nBarbara C. Marsden\nActing Director\nOffice of Regulatory Programs\nOffice of Product Evaluation and Quality\nCenter for Devices and Radiological Health","Technological Medical Advancements LLC","technological-medical-advancements-llc-712715-09262025","2026-08-18T06:42:28.676509+00:00",null,"https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Ftechnological-medical-advancements-llc-712715-09262025","2026-10-26T08:10:10.367898+00:00","Warning Letter","Issued","2025-10-07","712715","Medical Devices","Dr. Bruce R. Coren, DVM, MS","2026-08-19T16:15:16.641+00:00","VIA Electronic Mail","2025-09-26",{"id":32,"raw":33,"subject":38,"body_html":39,"body_text":40,"firm_name":41,"letter_id":42,"created_at":43,"fei_number":19,"letter_url":44,"updated_at":45,"action_type":22,"case_status":23,"posted_date":46,"marcs_cms_no":47,"product_type":26,"closeout_date":19,"issuing_office":11,"recipient_name":48,"body_fetched_at":49,"delivery_method":50,"recipient_title":19,"reference_number":19,"action_taken_date":51,"medical_device_id":19,"response_letter_date":19},1152,[34,35,36,11,37,13,13,13],"\u003Ctime datetime=\"2024-11-26T14:20:00Z\">11\u002F26\u002F2024\u003C\u002Ftime>\n","\u003Ctime datetime=\"2024-10-11T04:00:00Z\">10\u002F11\u002F2024\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fadept-medical-ltd-692226-10112024\">Adept Medical Ltd. \u003C\u002Fa>","CGMP\u002FQSR\u002FMedical Devices\u002FAdulterated\u002FMisbranded\u003Cbr \u002F>\r\n","CGMP\u002FQSR\u002FMedical Devices\u002FAdulterated\u002FMisbranded","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>Via Email\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Mr. Murray Fenton\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>Founder, CEO and Guiding Director\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Adept Medical Ltd. \u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>2-6 Mc Donald Street\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Morningside\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Auckland\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>New Zealand\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>October 11, 2024\u003C\u002Fp>\n\n\u003Cp>Dear Mr. Fenton:\u003C\u002Fp>\n\n\u003Cp>During an inspection of your firm located in Auckland, New Zealand on May 13, 2024, through May 16, 2024, an investigator from the United States Food and Drug Administration (FDA) determined that your firm manufactures Tympanostomy Tubes \"NeoZoline Ventilation Tubes\". Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\u003C\u002Fp>\n\n\u003Cp>This inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. §351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. We received a response from Ms. Yi Huang, Quality and Regulatory Manager dated June 13, 2024, concerning our investigator's observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, which was issued to your firm. We address this response below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\u003C\u002Fp>\n\n\u003Cp>1. Failure to establish and maintain procedures for acceptance activities, which include inspections, tests, or other verification activities, as required by 21 CFR 820.80(a).\u003C\u002Fp>\n\n\u003Cp>For example:\u003C\u002Fp>\n\n\u003Cp>1) Your firm's current incoming inspection and acceptance procedure for Biological Indicator \u003Cstrong>(b)(4)\u003C\u002Fstrong> (BI) is not adequately established. This inadequacy could compromise the sterilization process, potentially affecting the safety and effectiveness of the NeoZoline V ntilation Tubes. Your firm discards the Certificate of Conformance provided by&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> with each BI batch, which was requested by the FDA investigator during the inspection. It appears that your firm failed to retain critical documents such as the reconciliation sheet, production batch record, or \u003Cstrong>(b)(4)\u003C\u002Fstrong> Certification of Conformance, which are required under your own WI22 \"Production QC and Release Product Register,\" specifically section 2.3, to demonstrate that the product was successfully sterilized. The inspection revealed that your firm does not perform BI Population verification tests on the received BI batches to ensure that the population has not changed during shipping or storage. This is a critical step is necessary to provide a high degree of assurance that the BIs are viable to support verification that finished product is successfully sterilized through the&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> Sterilization process. Additionally, the inspection revealed that critical information such as the batch number and expiration date of the BI used in the sterile load is not documented on the post-sterilization B1 Test Reports, which are used as part of the finished device acceptance and release process.\u003C\u002Fp>\n\n\u003Cp>2) Your firm's incoming inspection and acceptance procedure for Sterile Potties (M1421, M1422) used for storing ultrasound cleaned NeoZoline Ventilation Tubes is not adequately established. The inspection revealed that your firm accepts incoming sterile pottle lots without a Certificate of Sterilization from the supplier. \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm stated that no additional testing or verification is performed to ensure the sterility of the incoming potties.&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on June 1, 2024. Your firm concluded that a risk analysis of the specific observation indicates no risk to end users for products currently in distribution and manufacturing. That conclusion is based on the following factors:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>The&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> Biological Indicator is an off the shelf product from supplier where \u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;has claimed compliance with ISO 11138-1:2017 and ISO 11138-2:2017.\u003C\u002Fli>\n\t\u003Cli>The BI is packaged in a foil pouch designed to protect the product from humidity excursions.\u003C\u002Fli>\n\t\u003Cli>The potties are used to store non-sterile Ventilation Tubes hence the sterility of the pottle is not a requirement.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>Additionally, your firm has outlined a plan with the following actions to be completed by December 1, 2024, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Based on your firm's response there is an ambiguity in the definition of the term `pottle' and whether it is required to be sterile or not. \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>your firm's response states that there is no risk for the stenle products manufactured at your facility because the BIs that they use conform to ISO 11138-1:2017 and ISO 11138-2:2017, and that they are in their sterile packaging until they are needed. However, the inspection demonstrated that your firm does not do any testing to verify that the BIs purchased for the purpose of demonstrating that terminal sterilization is achieved, are actually viable when they are used. Additionally, the inspection revealed that they do not capture key data such as BI batch number and expiration date, and thus if a BI falsely indicated that a sterilization was successful, there is no mechanism by which your firm can trace the lots of sterile products back to a failed BI.\u003C\u002Fp>\n\n\u003Cp>Additionally, your firm did not include documentation or evidence of the corrections or corrective actions because they are in progress and have not been completed. Additionally, given the observations described above, your firm has not provided a commitment to conduct a retrospective assessment of all finished devices whose sterilization was verified using Biological Indicator \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>to determine whether sterility was compromised.\u003C\u002Fp>\n\n\u003Cp>2. Failure to ensure that where the results of a process cannot be fully verified by subsequent inspection and test, the process shall be validated with a high degree of assurance and approved according to established procedures, as required by 21 CFR 820.75(a). For example:\u003C\u002Fp>\n\n\u003Cp>1) Your firm's ultrasonic cleaning process using the&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>Cleaner&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>is not adequately validated according to your firm's Manufacturing Process&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;\u003C\u002Fstrong>During the inspection, FDA's investigator revealed that the ultrasonic cleaning process was not adequately validated because critical details—such as the description of the NeoZoline Ventilation Tube (including part number, size, and shape), the number of validation batches (runs), validation batch size, and sample size used—were not documented.\u003C\u002Fp>\n\n\u003Cp>2) During the inspection, your firm stated that it had not validated the \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>process for the NeoZoline Ventilation Tube&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm&nbsp;stated that the&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>.&nbsp; Adept Medical also confirmed during the inspection that&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;had not validated the NeoZoline Ventilation Tube&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;and that prior to Spring 2023,&nbsp;\u003Cstrong>(b)(4) \u003C\u002Fstrong>the\u003Cstrong>&nbsp;\u003C\u002Fstrong>NeoZoline Ventilation Tube \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>who also did not have a&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> NeoZoline Ventilation Tube.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates its Initial Action was completed on June 1, 2024. Your firm concluded that there is no risk to end users for products currently in supply and with distributors, based on the following factors:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>There is an existing validated sterilization process indicating a sterility assurance level of \u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fli>\n\t\u003Cli>Annual bioburden results of pre-cleaned devices have bioburden levels below&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> CFU.\u003C\u002Fli>\n\t\u003Cli>Current validation data, although not well documented in its sample selection and setting, still indicated the current setting provided adequate bioburden results, well within the capability of the sterilization process.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>Additionally, your firm has outlined a plan to be completed by June 1, 2025, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>However, your firm has not provided any evidence to substantiate your claims that the&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>sterility assurance level or the bioburden limits below \u003Cstrong>(b)(4)\u003C\u002Fstrong> CFU were consistently achievable. The inspection raised concerns about your firm sterilization process, as discussed in the above section regarding compliance with 21 CFR 820.80(a). It is noteworthy that FDA requested validation documents for the \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>Cleaner during the May 2024 inspection and did not receive any documentation to indicate that this process was validated.\u003C\u002Fp>\n\n\u003Cp>3. Failure to establish and maintain procedures for implementing corrective and preventive action, as required by 21 CFR 820.100. For example:\u003C\u002Fp>\n\n\u003Cp>Your firm's Corrective and Preventive Action (CAPA) procedure (M05-03) fails to ensure that:\u003C\u002Fp>\n\n\u003Cp>1) The quality data is adequately analyzed to identify potential and existing causes of nonconformances or other quality issues. Your firm stated to the FDA investigator that, although data is analyzed, they do not evaluate the results to determine whether any corrective or preventive actions are necessary, as required by 21 CFR 820.100(a)(3).\u003C\u002Fp>\n\n\u003Cp>2) Your firm failed to adequately verify the effectiveness of corrective actions for several CAPAs before closing them. Specifically, CAPAs CA-459, CA-438, and CA-437 were closed after implementing corrective actions, but your firm did not verify the effectiveness of these actions, as required by 21 CFR 820.100(a)(4).\u003C\u002Fp>\n\n\u003Cp>3) CA-429 was closed on February 16, 2023; at the time of the inspection, your firm stated that they had not started any of the corrective actions identified in the CAPA. As a result of the discussion during the inspection, your firm volunteered to mark the CAPA as 'open,' so that the corrective actions could be implemented.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that although procedure&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>the procedure did not instruct how to this data should be analyzed, and what subsequent actions should be taken once the data analysis is complete. However, your firm's procedure&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Your firm has outlined the following plan to be completed by April 1, 2025, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>However, your firm's response does not identify conducting a retrospective analysis for all past CAPAs, to determine the impact of the lack of data analysis, and whether the appropriate corrective and\u002For preventive action was taken to address each CAPA's root cause. Additionally, your firm did not identify what actions it would take to address the lack of implementation of identified corrective actions and whether that issue is a systemic problem.\u003C\u002Fp>\n\n\u003Cp>4. Failure to establish and maintain procedures to control product that does not conform to specified requirements, including the identification, documentation, evaluation, segregation, and disposition of nonconforming product; and failure to ensure that the evaluation includes a determination of the need for an investigation, as required by 21 CFR 820.90(a). For example:\u003C\u002Fp>\n\n\u003Cp>The FDA investigator reviewed six NC records related to your firm's NeoZoline Ventilation Tubes. All six NC records were closed (NC-2516, NC-2767, NC-2641, NC-2640, NC-2738, NC-2523), but showed the following deficiencies in documentation:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>The NC records did not adequately document the evaluation of the identified nonconformities.\u003C\u002Fli>\n\t\u003Cli>The rationale for not conducting related investigations was inadequately documented in all six NC records.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>Your firm explained that incoming NeoZoline Ventilation Tubes \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>are not inspected upon arrival.&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;\u003C\u002Fstrong>Your firm further stated that they \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;\u003C\u002Fstrong>This target achievement was cited as the reason for not taking further action.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that there is no risk to end users for products currently in supply and with distributors. That conclusion is based on postmarket surveillance data, which shows no product safety or performance complaints since the product's launch. However, a lack of documented safety signals does not ensure that nonconforming product was controlled and not introduced into commerce.\u003C\u002Fp>\n\n\u003Cp>Additionally, your firm has outlined a plan to be completed by April 1, 2025, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>However, your firm did not include documentation to demonstrate that it has evaluated or will evaluate all past non-conformances against your new procedure to determine whether additional corrective action was required to address the non-conformances identified in your NC Records.\u003C\u002Fp>\n\n\u003Cp>5. Failure to define the type and extent of control to be exercised over the product, services, suppliers, contractors, and consultants, based on the evaluation results, as required by 21 CFR 820.50(a)(2). For example:\u003C\u002Fp>\n\n\u003Cp>During the inspection, your firm was asked whether the \u003Cstrong>(b)(4)\u003C\u002Fstrong> for the NeoZoline ventilation tubes was validated&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm stated you have no knowledge or documentation regarding&nbsp;whether the&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>for the NeoZoline Ventilation Tubes had been properly&nbsp;validated.&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>Adept Medical learned the&nbsp;\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>Adept Medical received \u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;units of NeoZoline Ventilation Tubes in various types from&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;between June 2023 and November 2023. They released \u003Cstrong>(b)(4) \u003C\u002Fstrong>units\u003Cstrong>&nbsp;\u003C\u002Fstrong>(\u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>boxes) of the NeoZoline Ventilation Tubes to the United States. Prior to June 2023, all NeoZoline Ventilation Tubes were \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;&nbsp;\u003C\u002Fstrong>Adept has failed to ensure that the conditions of the supplier agreement were adhered to by your supplier.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that there is no risk to the end users for products currently in supply and with distributors, based on the following considerations:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>The post-market periodic safety update report (PSUR) on Ventilation Tubes supplied by \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>indicated no adverse events.\u003C\u002Fli>\n\t\u003Cli>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fli>\n\t\u003Cli>Post market surveillance data indicated we have had no product safety or performance complaints since product launch.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>However, a lack of adverse events in post market safety signals does not provide assurance that the device meets its design specifications, in light of the fact that, Adept Medical was unaware that your supplier \u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;the NeoZoline Ventilation Tube \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>did not have any documentation that the \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>device was validated.\u003C\u002Fp>\n\n\u003Cp>Additionally, your firm has outlined a plan to be completed by June 1, 2025, which includes the following actions:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>However, based on your firm's response, it is unclear how you intend to evaluate suppliers' compliance with 21 CFR Part 820, the Quality System Regulation.\u003C\u002Fp>\n\n\u003Cp>Our inspection also revealed that the NeoZoline Ventilation Tubes are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PM_A) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, in that your firm did not notify FDA regarding a significant change or modification in the device that could significantly affect the safety or effectiveness of the device, as required by section 510(k) of the Act, 21 U.S.C. § 360(k), and 21 C.F.R. 807.81 (a)(3)(i).\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm has modified the NeoZoline Ventilation Tubes cleared under K061058. The modification involves the use of a \u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;which was not cleared in the original submission and is a change that could significantly affect the safety or effectiveness of the device. This modification necessitates a comprehensive risk assessment to ensure the device remains safe and effective. A new biocompatibility evaluation is required to determine if \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003Cstrong>&nbsp;\u003C\u002Fstrong>Any \u003Cstrong>(b)(4)\u003C\u002Fstrong> may affect how the device can be safely and effectively sterilized. Thus, your sterilization processes must be validated for the&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> to ensure that it can be properly sterilized without&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong> becoming unsafe. The change in \u003Cstrong>(b)(4)\u003C\u002Fstrong> may alter the device's performance or specifications, so a thorough re-evaluation is necessary to ensure it still meets all necessary standards and functions as intended. Due to the \u003Cstrong>(b)(4)\u003C\u002Fstrong> modification and its potential impact on the device's safety and performance, a new 510(k) submission is required before marketing the modified device in the United States.\u003C\u002Fp>\n\n\u003Cp>For a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the agency. [21 CFR 807.81(b)] The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fd efault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\u003C\u002Fp>\n\n\u003Cp>Other federal agencies may take your compliance with the FD&amp;C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed.\u003C\u002Fp>\n\n\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, including an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm's planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Please provide a translation of documentation not in English to facilitate our review. We will notify you regarding the adequacy of your firm's response(s) and the need to re-inspect your firm's facility to verify that the appropriate corrections and\u002For corrective actions have been made. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\n\n\u003Cp>Your firm's response should be sent via email to CDRHWarningLetterResponses@fda.hhs.gov or by mail to Food and Drug Administration, Center for Devices and Radiological Health, Office of Regulatory Programs, Division of Regulatory Programs 2, FDA Regulatory Inspections and Audits Team, White Oak Building 66, 10903 New Hampshire Ave., Silver Spring, MD 20993. Refer to CMS case #692226 when replying. If you have any questions about the contents of this letter, please contact: Shu-Chen Peng, Ph.D. at 301-796-6481.\u003C\u002Fp>\n\n\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm's facility. It is your firm's responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm's manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\u003C\u002Fp>\n\n\u003Cp>Sincerely yours,\u003Cbr>\n\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>Malvina B. Eydelman, M.D.\u003Cbr>\nDirector\u003Cbr>\nOHT1: Office of Ophthalmic, Anesthesia,\u003Cbr>\nRespiratory, ENT and Dental Devices\u003Cbr>\nOffice of Product Evaluation and Quality\u003Cbr>\nCenter for Devices and Radiological Health\u003C\u002Fp>\n\n\u003Cp>CC:\u003Cbr>\n\u003Cstrong>(b)(4)\u003C\u002Fstrong>, Registrar Corp.,\u003Cbr>\n144 Research Drive,\u003Cbr>\nHampton, Virginia,\u003Cbr>\nUSA 23666\u003Cbr>\nPhone: Tel: 1-757-224-0177, Ext.&nbsp;\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003Cbr>\nEmail:\u003Cstrong>(b)(4)\u003C\u002Fstrong>@registrarcorp.com\u003C\u002Fp>\n\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVia Email\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nMr. Murray Fenton\n\nRecipient Title\n\nFounder, CEO and Guiding Director\n\nAdept Medical Ltd.\n\n2-6 Mc Donald Street\n\nMorningside\n\nAuckland\n\nNew Zealand\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nWARNING LETTER\n\nOctober 11, 2024\n\nDear Mr. Fenton:\n\nDuring an inspection of your firm located in Auckland, New Zealand on May 13, 2024, through May 16, 2024, an investigator from the United States Food and Drug Administration (FDA) determined that your firm manufactures Tympanostomy Tubes \"NeoZoline Ventilation Tubes\". Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\n\nThis inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. §351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. We received a response from Ms. Yi Huang, Quality and Regulatory Manager dated June 13, 2024, concerning our investigator's observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, which was issued to your firm. We address this response below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\n\n1. Failure to establish and maintain procedures for acceptance activities, which include inspections, tests, or other verification activities, as required by 21 CFR 820.80(a).\n\nFor example:\n\n1) Your firm's current incoming inspection and acceptance procedure for Biological Indicator (b)(4) (BI) is not adequately established. This inadequacy could compromise the sterilization process, potentially affecting the safety and effectiveness of the NeoZoline V ntilation Tubes. Your firm discards the Certificate of Conformance provided by (b)(4) with each BI batch, which was requested by the FDA investigator during the inspection. It appears that your firm failed to retain critical documents such as the reconciliation sheet, production batch record, or (b)(4) Certification of Conformance, which are required under your own WI22 \"Production QC and Release Product Register,\" specifically section 2.3, to demonstrate that the product was successfully sterilized. The inspection revealed that your firm does not perform BI Population verification tests on the received BI batches to ensure that the population has not changed during shipping or storage. This is a critical step is necessary to provide a high degree of assurance that the BIs are viable to support verification that finished product is successfully sterilized through the (b)(4) Sterilization process. Additionally, the inspection revealed that critical information such as the batch number and expiration date of the BI used in the sterile load is not documented on the post-sterilization B1 Test Reports, which are used as part of the finished device acceptance and release process.\n\n2) Your firm's incoming inspection and acceptance procedure for Sterile Potties (M1421, M1422) used for storing ultrasound cleaned NeoZoline Ventilation Tubes is not adequately established. The inspection revealed that your firm accepts incoming sterile pottle lots without a Certificate of Sterilization from the supplier. (b)(4). Your firm stated that no additional testing or verification is performed to ensure the sterility of the incoming potties. (b)(4)\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on June 1, 2024. Your firm concluded that a risk analysis of the specific observation indicates no risk to end users for products currently in distribution and manufacturing. That conclusion is based on the following factors:\n\nThe (b)(4) Biological Indicator is an off the shelf product from supplier where (b)(4) has claimed compliance with ISO 11138-1:2017 and ISO 11138-2:2017.\n\nThe BI is packaged in a foil pouch designed to protect the product from humidity excursions.\n\nThe potties are used to store non-sterile Ventilation Tubes hence the sterility of the pottle is not a requirement.\n\nAdditionally, your firm has outlined a plan with the following actions to be completed by December 1, 2024, which includes the following actions:\n\n(b)(4)\n\nBased on your firm's response there is an ambiguity in the definition of the term `pottle' and whether it is required to be sterile or not. (b)(4) your firm's response states that there is no risk for the stenle products manufactured at your facility because the BIs that they use conform to ISO 11138-1:2017 and ISO 11138-2:2017, and that they are in their sterile packaging until they are needed. However, the inspection demonstrated that your firm does not do any testing to verify that the BIs purchased for the purpose of demonstrating that terminal sterilization is achieved, are actually viable when they are used. Additionally, the inspection revealed that they do not capture key data such as BI batch number and expiration date, and thus if a BI falsely indicated that a sterilization was successful, there is no mechanism by which your firm can trace the lots of sterile products back to a failed BI.\n\nAdditionally, your firm did not include documentation or evidence of the corrections or corrective actions because they are in progress and have not been completed. Additionally, given the observations described above, your firm has not provided a commitment to conduct a retrospective assessment of all finished devices whose sterilization was verified using Biological Indicator (b)(4) to determine whether sterility was compromised.\n\n2. Failure to ensure that where the results of a process cannot be fully verified by subsequent inspection and test, the process shall be validated with a high degree of assurance and approved according to established procedures, as required by 21 CFR 820.75(a). For example:\n\n1) Your firm's ultrasonic cleaning process using the (b)(4) Cleaner (b)(4) is not adequately validated according to your firm's Manufacturing Process (b)(4). During the inspection, FDA's investigator revealed that the ultrasonic cleaning process was not adequately validated because critical details—such as the description of the NeoZoline Ventilation Tube (including part number, size, and shape), the number of validation batches (runs), validation batch size, and sample size used—were not documented.\n\n2) During the inspection, your firm stated that it had not validated the (b)(4) process for the NeoZoline Ventilation Tube (b)(4). Your firm stated that the (b)(4). Adept Medical also confirmed during the inspection that (b)(4) had not validated the NeoZoline Ventilation Tube (b)(4) and that prior to Spring 2023, (b)(4) the NeoZoline Ventilation Tube (b)(4) who also did not have a (b)(4) NeoZoline Ventilation Tube.\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates its Initial Action was completed on June 1, 2024. Your firm concluded that there is no risk to end users for products currently in supply and with distributors, based on the following factors:\n\nThere is an existing validated sterilization process indicating a sterility assurance level of (b)(4)\n\nAnnual bioburden results of pre-cleaned devices have bioburden levels below (b)(4) CFU.\n\nCurrent validation data, although not well documented in its sample selection and setting, still indicated the current setting provided adequate bioburden results, well within the capability of the sterilization process.\n\nAdditionally, your firm has outlined a plan to be completed by June 1, 2025, which includes the following actions:\n\n(b)(4)\n\nHowever, your firm has not provided any evidence to substantiate your claims that the (b)(4) sterility assurance level or the bioburden limits below (b)(4) CFU were consistently achievable. The inspection raised concerns about your firm sterilization process, as discussed in the above section regarding compliance with 21 CFR 820.80(a). It is noteworthy that FDA requested validation documents for the (b)(4) Cleaner during the May 2024 inspection and did not receive any documentation to indicate that this process was validated.\n\n3. Failure to establish and maintain procedures for implementing corrective and preventive action, as required by 21 CFR 820.100. For example:\n\nYour firm's Corrective and Preventive Action (CAPA) procedure (M05-03) fails to ensure that:\n\n1) The quality data is adequately analyzed to identify potential and existing causes of nonconformances or other quality issues. Your firm stated to the FDA investigator that, although data is analyzed, they do not evaluate the results to determine whether any corrective or preventive actions are necessary, as required by 21 CFR 820.100(a)(3).\n\n2) Your firm failed to adequately verify the effectiveness of corrective actions for several CAPAs before closing them. Specifically, CAPAs CA-459, CA-438, and CA-437 were closed after implementing corrective actions, but your firm did not verify the effectiveness of these actions, as required by 21 CFR 820.100(a)(4).\n\n3) CA-429 was closed on February 16, 2023; at the time of the inspection, your firm stated that they had not started any of the corrective actions identified in the CAPA. As a result of the discussion during the inspection, your firm volunteered to mark the CAPA as 'open,' so that the corrective actions could be implemented.\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that although procedure (b)(4) the procedure did not instruct how to this data should be analyzed, and what subsequent actions should be taken once the data analysis is complete. However, your firm's procedure (b)(4)\n\nYour firm has outlined the following plan to be completed by April 1, 2025, which includes the following actions:\n\n(b)(4)\n\nHowever, your firm's response does not identify conducting a retrospective analysis for all past CAPAs, to determine the impact of the lack of data analysis, and whether the appropriate corrective and\u002For preventive action was taken to address each CAPA's root cause. Additionally, your firm did not identify what actions it would take to address the lack of implementation of identified corrective actions and whether that issue is a systemic problem.\n\n4. Failure to establish and maintain procedures to control product that does not conform to specified requirements, including the identification, documentation, evaluation, segregation, and disposition of nonconforming product; and failure to ensure that the evaluation includes a determination of the need for an investigation, as required by 21 CFR 820.90(a). For example:\n\nThe FDA investigator reviewed six NC records related to your firm's NeoZoline Ventilation Tubes. All six NC records were closed (NC-2516, NC-2767, NC-2641, NC-2640, NC-2738, NC-2523), but showed the following deficiencies in documentation:\n\nThe NC records did not adequately document the evaluation of the identified nonconformities.\n\nThe rationale for not conducting related investigations was inadequately documented in all six NC records.\n\nYour firm explained that incoming NeoZoline Ventilation Tubes (b)(4) are not inspected upon arrival. (b)(4). Your firm further stated that they (b)(4). This target achievement was cited as the reason for not taking further action.\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that there is no risk to end users for products currently in supply and with distributors. That conclusion is based on postmarket surveillance data, which shows no product safety or performance complaints since the product's launch. However, a lack of documented safety signals does not ensure that nonconforming product was controlled and not introduced into commerce.\n\nAdditionally, your firm has outlined a plan to be completed by April 1, 2025, which includes the following actions:\n\n(b)(4)\n\nHowever, your firm did not include documentation to demonstrate that it has evaluated or will evaluate all past non-conformances against your new procedure to determine whether additional corrective action was required to address the non-conformances identified in your NC Records.\n\n5. Failure to define the type and extent of control to be exercised over the product, services, suppliers, contractors, and consultants, based on the evaluation results, as required by 21 CFR 820.50(a)(2). For example:\n\nDuring the inspection, your firm was asked whether the (b)(4) for the NeoZoline ventilation tubes was validated (b)(4). Your firm stated you have no knowledge or documentation regarding whether the (b)(4) for the NeoZoline Ventilation Tubes had been properly validated. (b)(4) Adept Medical learned the (b)(4) Adept Medical received (b)(4) units of NeoZoline Ventilation Tubes in various types from (b)(4) between June 2023 and November 2023. They released (b)(4) units ((b)(4) boxes) of the NeoZoline Ventilation Tubes to the United States. Prior to June 2023, all NeoZoline Ventilation Tubes were (b)(4). Adept has failed to ensure that the conditions of the supplier agreement were adhered to by your supplier.\n\nWe reviewed your firm's response dated June 13, 2024, and conclude that it is not adequate. Your firm's response indicates that its Initial Action was completed on May 29, 2024. Your firm concluded that there is no risk to the end users for products currently in supply and with distributors, based on the following considerations:\n\nThe post-market periodic safety update report (PSUR) on Ventilation Tubes supplied by (b)(4) indicated no adverse events.\n\n(b)(4)\n\nPost market surveillance data indicated we have had no product safety or performance complaints since product launch.\n\nHowever, a lack of adverse events in post market safety signals does not provide assurance that the device meets its design specifications, in light of the fact that, Adept Medical was unaware that your supplier (b)(4) the NeoZoline Ventilation Tube (b)(4) did not have any documentation that the (b)(4) device was validated.\n\nAdditionally, your firm has outlined a plan to be completed by June 1, 2025, which includes the following actions:\n\n(b)(4)\n\nHowever, based on your firm's response, it is unclear how you intend to evaluate suppliers' compliance with 21 CFR Part 820, the Quality System Regulation.\n\nOur inspection also revealed that the NeoZoline Ventilation Tubes are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PM_A) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption under section 520(g) of the Act, 21 U.S.C. § 360j(g). The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, in that your firm did not notify FDA regarding a significant change or modification in the device that could significantly affect the safety or effectiveness of the device, as required by section 510(k) of the Act, 21 U.S.C. § 360(k), and 21 C.F.R. 807.81 (a)(3)(i).\n\nSpecifically, your firm has modified the NeoZoline Ventilation Tubes cleared under K061058. The modification involves the use of a (b)(4) which was not cleared in the original submission and is a change that could significantly affect the safety or effectiveness of the device. This modification necessitates a comprehensive risk assessment to ensure the device remains safe and effective. A new biocompatibility evaluation is required to determine if (b)(4). Any (b)(4) may affect how the device can be safely and effectively sterilized. Thus, your sterilization processes must be validated for the (b)(4) to ensure that it can be properly sterilized without (b)(4) becoming unsafe. The change in (b)(4) may alter the device's performance or specifications, so a thorough re-evaluation is necessary to ensure it still meets all necessary standards and functions as intended. Due to the (b)(4) modification and its potential impact on the device's safety and performance, a new 510(k) submission is required before marketing the modified device in the United States.\n\nFor a device requiring premarket approval, the notification required by section 510(k) is deemed satisfied when a PMA is pending before the agency. [21 CFR 807.81(b)] The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fd efault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\n\nOther federal agencies may take your compliance with the FD&C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed.\n\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, including an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm's planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Please provide a translation of documentation not in English to facilitate our review. We will notify you regarding the adequacy of your firm's response(s) and the need to re-inspect your firm's facility to verify that the appropriate corrections and\u002For corrective actions have been made. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration as part of your response.\n\nYour firm's response should be sent via email to CDRHWarningLetterResponses@fda.hhs.gov or by mail to Food and Drug Administration, Center for Devices and Radiological Health, Office of Regulatory Programs, Division of Regulatory Programs 2, FDA Regulatory Inspections and Audits Team, White Oak Building 66, 10903 New Hampshire Ave., Silver Spring, MD 20993. Refer to CMS case #692226 when replying. If you have any questions about the contents of this letter, please contact: Shu-Chen Peng, Ph.D. at 301-796-6481.\n\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm's facility. It is your firm's responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm's manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\n\nSincerely yours,\n\n\u002FS\u002F\n\nMalvina B. Eydelman, M.D.\n\nDirector\n\nOHT1: Office of Ophthalmic, Anesthesia,\n\nRespiratory, ENT and Dental Devices\n\nOffice of Product Evaluation and Quality\n\nCenter for Devices and Radiological Health\n\nCC:\n\n(b)(4), Registrar Corp.,\n\n144 Research Drive,\n\nHampton, Virginia,\n\nUSA 23666\n\nPhone: Tel: 1-757-224-0177, Ext. (b)(4)\n\nEmail:(b)(4)@registrarcorp.com","Adept Medical Ltd.","adept-medical-ltd-692226-10112024","2026-08-18T06:42:28.856152+00:00","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fadept-medical-ltd-692226-10112024","2026-10-26T08:07:50.120298+00:00","2024-11-26","692226","Mr. Murray Fenton","2026-08-19T17:57:49.713+00:00","Via Email","2024-10-11",{"id":53,"raw":54,"subject":59,"body_html":60,"body_text":61,"firm_name":62,"letter_id":63,"created_at":64,"fei_number":19,"letter_url":65,"updated_at":66,"action_type":22,"case_status":23,"posted_date":67,"marcs_cms_no":68,"product_type":69,"closeout_date":19,"issuing_office":58,"recipient_name":70,"body_fetched_at":71,"delivery_method":72,"recipient_title":19,"reference_number":73,"action_taken_date":74,"medical_device_id":19,"response_letter_date":19},21927,[55,56,57,58,59,13,13,13],"\u003Ctime datetime=\"2026-10-20T04:00:00Z\">10\u002F20\u002F2026\u003C\u002Ftime>\n","\u003Ctime datetime=\"2026-10-06T04:00:00Z\">10\u002F06\u002F2026\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Ftides-medical-llc-727246-10062026\">Tides Medical LLC\u003C\u002Fa>","Center for Biologics Evaluation and Research (CBER)","Investigational Device Exemptions (IDE)\u002FPremarket Approval Application (PMA)","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>VIA UPS and Electronic Mail\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n              \u003Cdt>Reference #:\u003C\u002Fdt> \n        \u003Cdd>CBER 26-727246\u003C\u002Fdd>\n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Biologics                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Joe Spell\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>Chief Executive Officer \u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Tides Medical LLC\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>605 Kaliste Saloom Road, Suite 1\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Lafayette\u003C\u002Fspan>, \u003Cspan>LA\u003C\u002Fspan> \u003Cspan>70508\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:jspell@tidesmedical.com\"> jspell@tidesmedical.com\u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Biologics Evaluation and Research (CBER)\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>October 6, 2026\u003C\u002Fp>\u003Cp>CBER 26-727246\u003C\u002Fp>\u003Cp>Dear Mr. Spell:\u003C\u002Fp>\u003Cp>The United States Food and Drug Administration (FDA) has learned that your firm is distributing APLICOR 3D in the United States without marketing clearance or approval, in violation of the Federal Food, Drug, and Cosmetic Act (the Act). Under section 201(h) of the Act, 21 U.S.C. § 321(h), this product is a device because it is intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\u003Cem>\u003Cstrong>\u003Csup>1\u003C\u002Fsup>\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fp>\u003Cp>FDA has reviewed information and records, including your website at https:\u002F\u002Fwww.tidesmedical.com\u002Faplicor-3d\u002F (last visited October 2026), and determined that APLICOR 3D is adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PMA) for these devices in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption (IDE) under section 520(g) of the Act, 21 U.S.C. § 360j(g). APLICOR 3D is also misbranded under section 502(o) of the Act, 21 U.S.C. § 352(o), because your firm did not timely notify the agency of its intent to begin the introduction or delivery for introduction into interstate commerce for commercial distribution of these devices, as required by section 510(k) of the Act, 21 U.S.C. § 360(k).\u003C\u002Fp>\u003Cp>Your firm has stated that the APLICOR 3D device is a Class I device exempt from the requirement of premarket notification. You have indicated that the APLICOR 3D device is a liquid medication dispenser under product code KYX and 21 CFR 880.6430. Devices classified under 21 CFR 880.6430, liquid medication dispenser, are exempt from premarket notification unless they exceed the limitations of exemptions at 21 CFR 880.9. However, there is evidence that APLICOR 3D is intended for uses that are different from those of legally marketed devices classified under 21 CFR 880.6430, liquid medication dispenser. 21 CFR 880.6430(a) states that a liquid medication dispenser is a device intended for medical purposes that is used to issue a measured amount of liquid medication. However, your firm is distributing APLICOR 3D for the following intended uses:\u003C\u002Fp>\u003Cul>\u003Cli>“APLICOR 3D is a hyper-personalized 3D bioprinting platform that uses a patient’s own adipose tissue to create customized grafts for acute and chronic wounds. With a single application, this system simplifies workflows and accelerates wound progression.”\u003C\u002Fli>\u003Cli>“APLICOR 3D is a single-use 3D bioprinting system that transforms autologous adipose tissue into a personalized graft, precisely matching the size and depth of a patient’s wound.”\u003C\u002Fli>\u003Cli>“APLICOR 3D is designed for use in treating acute and chronic wounds such as diabetic foot ulcers, venous stasis ulcers, pressure injuries, burns, and trauma.”\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Because there is evidence that APLICOR 3D is intended for uses that are different from those of legally marketed devices classified under 21 CFR 880.6430, it exceeds the limitations described in 21 CFR 880.9 and is not exempt from premarket notification.\u003C\u002Fp>\u003Cp>For a device requiring premarket approval, the notification required by section 510(k) of the Act, 21 U.S.C. § 360(k), is deemed satisfied when a PMA is pending before FDA. The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. FDA will evaluate the information that your firm submits and decide whether the products may be legally marketed.\u003C\u002Fp>\u003Cp>\u003Cstrong>Conclusion\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Our office requests that Tides Medical LLC cease any activities that result in the misbranding or adulteration of APLICOR 3D, including the commercial distribution of these devices for the uses discussed above.\u003C\u002Fp>\u003Cp>Your firm should take prompt action to address any violations identified in this letter. Failure to promptly and adequately address this matter may result in regulatory action being initiated by FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\u003C\u002Fp>\u003Cp>Please notify our office in writing within fifteen (15) business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions your firm has taken, which should address any systemic problems. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen (15) business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that APLICOR 3D is not in violation of the Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\u003Cp>Send your electronic response and any questions regarding this letter to CBER’s Office of Compliance and Biologics Quality, Division of Case Management at CBERDCMRecommendations@fda.hhs.gov. Refer to the CBER number at the top of this letter when replying.\u003C\u002Fp>\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm. It is your firm’s responsibility to ensure compliance with the applicable laws and regulations administered by FDA.\u003C\u002Fp>\u003Cp>Sincerely,\u003C\u002Fp>\u003Cp>\u002FS\u002F\u003C\u002Fp>\u003Cp>Vincent Amatrudo\u003Cbr>Acting Director\u003Cbr>Office of Compliance and Biologics Quality\u003Cbr>Center for Biologics Evaluation and Research\u003C\u002Fp>\u003Cp>___________________\u003C\u002Fp>\u003Cp>\u003Cem>\u003Cstrong>1\u003C\u002Fstrong>\u003C\u002Fem> FDA acknowledges receipt of your February 26, 2026, correspondence responding to the February 25, 2026, letter sent to your firm from FDA’s Center for Devices and Radiological Health.\u003C\u002Fp>\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVIA UPS and Electronic Mail\n\nReference #:\n\nCBER 26-727246\n\nProduct:\n\nBiologics\n\nRecipient:\n\nRecipient Name\n\nJoe Spell\n\nRecipient Title\n\nChief Executive Officer\n\nTides Medical LLC\n\n605 Kaliste Saloom Road, Suite 1\n\nLafayette, LA 70508\n\nUnited States\n\njspell@tidesmedical.com\n\nIssuing Office:\n\nCenter for Biologics Evaluation and Research (CBER)\n\nUnited States\n\nWARNING LETTER\nOctober 6, 2026\nCBER 26-727246\nDear Mr. Spell:\nThe United States Food and Drug Administration (FDA) has learned that your firm is distributing APLICOR 3D in the United States without marketing clearance or approval, in violation of the Federal Food, Drug, and Cosmetic Act (the Act). Under section 201(h) of the Act, 21 U.S.C. § 321(h), this product is a device because it is intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.1\nFDA has reviewed information and records, including your website at https:\u002F\u002Fwww.tidesmedical.com\u002Faplicor-3d\u002F (last visited October 2026), and determined that APLICOR 3D is adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have an approved application for premarket approval (PMA) for these devices in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption (IDE) under section 520(g) of the Act, 21 U.S.C. § 360j(g). APLICOR 3D is also misbranded under section 502(o) of the Act, 21 U.S.C. § 352(o), because your firm did not timely notify the agency of its intent to begin the introduction or delivery for introduction into interstate commerce for commercial distribution of these devices, as required by section 510(k) of the Act, 21 U.S.C. § 360(k).\nYour firm has stated that the APLICOR 3D device is a Class I device exempt from the requirement of premarket notification. You have indicated that the APLICOR 3D device is a liquid medication dispenser under product code KYX and 21 CFR 880.6430. Devices classified under 21 CFR 880.6430, liquid medication dispenser, are exempt from premarket notification unless they exceed the limitations of exemptions at 21 CFR 880.9. However, there is evidence that APLICOR 3D is intended for uses that are different from those of legally marketed devices classified under 21 CFR 880.6430, liquid medication dispenser. 21 CFR 880.6430(a) states that a liquid medication dispenser is a device intended for medical purposes that is used to issue a measured amount of liquid medication. However, your firm is distributing APLICOR 3D for the following intended uses:\n“APLICOR 3D is a hyper-personalized 3D bioprinting platform that uses a patient’s own adipose tissue to create customized grafts for acute and chronic wounds. With a single application, this system simplifies workflows and accelerates wound progression.”\n“APLICOR 3D is a single-use 3D bioprinting system that transforms autologous adipose tissue into a personalized graft, precisely matching the size and depth of a patient’s wound.”\n“APLICOR 3D is designed for use in treating acute and chronic wounds such as diabetic foot ulcers, venous stasis ulcers, pressure injuries, burns, and trauma.”\nBecause there is evidence that APLICOR 3D is intended for uses that are different from those of legally marketed devices classified under 21 CFR 880.6430, it exceeds the limitations described in 21 CFR 880.9 and is not exempt from premarket notification.\nFor a device requiring premarket approval, the notification required by section 510(k) of the Act, 21 U.S.C. § 360(k), is deemed satisfied when a PMA is pending before FDA. The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. FDA will evaluate the information that your firm submits and decide whether the products may be legally marketed.\nConclusion\nOur office requests that Tides Medical LLC cease any activities that result in the misbranding or adulteration of APLICOR 3D, including the commercial distribution of these devices for the uses discussed above.\nYour firm should take prompt action to address any violations identified in this letter. Failure to promptly and adequately address this matter may result in regulatory action being initiated by FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\nPlease notify our office in writing within fifteen (15) business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions your firm has taken, which should address any systemic problems. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen (15) business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that APLICOR 3D is not in violation of the Act, include your reasoning and any supporting information for our consideration as part of your response.\nSend your electronic response and any questions regarding this letter to CBER’s Office of Compliance and Biologics Quality, Division of Case Management at CBERDCMRecommendations@fda.hhs.gov. Refer to the CBER number at the top of this letter when replying.\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm. It is your firm’s responsibility to ensure compliance with the applicable laws and regulations administered by FDA.\nSincerely,\n\u002FS\u002F\nVincent Amatrudo\nActing Director\nOffice of Compliance and Biologics Quality\nCenter for Biologics Evaluation and Research\n___________________\n1 FDA acknowledges receipt of your February 26, 2026, correspondence responding to the February 25, 2026, letter sent to your firm from FDA’s Center for Devices and Radiological Health.","Tides Medical LLC","tides-medical-llc-727246-10062026","2026-10-27T01:18:54.544251+00:00","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Ftides-medical-llc-727246-10062026","2026-11-17T01:02:03.701861+00:00","2026-10-20","727246","Biologics","Joe Spell","2026-10-27T01:19:42.766+00:00","VIA UPS and Electronic Mail","CBER 26-727246","2026-10-06",{"id":76,"raw":77,"subject":81,"body_html":82,"body_text":83,"firm_name":84,"letter_id":85,"created_at":43,"fei_number":19,"letter_url":86,"updated_at":87,"action_type":22,"case_status":23,"posted_date":88,"marcs_cms_no":89,"product_type":26,"closeout_date":19,"issuing_office":11,"recipient_name":90,"body_fetched_at":91,"delivery_method":29,"recipient_title":19,"reference_number":19,"action_taken_date":92,"medical_device_id":19,"response_letter_date":19},1030,[78,79,80,11,81,13,13,13],"\u003Ctime datetime=\"2025-03-11T04:00:00Z\">03\u002F11\u002F2025\u003C\u002Ftime>\n","\u003Ctime datetime=\"2025-02-05T05:00:00Z\">02\u002F05\u002F2025\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fqapel-medical-inc-699244-02052025\">Q’Apel Medical, Inc.\u003C\u002Fa>","Investigational Device Exemptions (IDE)\u002FPremarket Approval Application (PMA) Adulterated Device","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>VIA Electronic Mail\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Jodie C. Fam\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>Chief Executive Officer \u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Q’Apel Medical, Inc.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>4245 Technology Drive\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Fremont\u003C\u002Fspan>, \u003Cspan>CA\u003C\u002Fspan> \u003Cspan>94538\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>February 5, 2025\u003C\u002Fp>\u003Cp>Dear Ms. Fam:\u003C\u002Fp>\u003Cp>During an inspection of your firm located in Fremont, CA on July 29, 2024, through August 8, 2024, investigators from the United States Food and Drug Administration (FDA) determined that your firm manufactures the 072 Aspiration System (also marketed under the trade name “HIPPO”). Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\u003C\u002Fp>\u003Cp>FDA has reviewed information collected during the inspection of your firm located in Fremont, California on July 29, 2024, through August 8, 2024, and determined that the 072 Aspiration System (HIPPO) is adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. §351(f)(1)(B), because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption (IDE) under section 520(g) of the Act, 21 U.S.C. § 360j(g), for the device as described and marketed. The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C.\u003C\u002Fp>\u003Cp>Specifically, FDA cleared, under K222786, the device that you identified in your submission to the agency as the 072 Aspiration System with the following indications, “072 Aspiration Catheter: As part of the 072 Aspiration System, the 072 Aspiration Catheter with a compatible suction pump is indicated for use in the revascularization of patients with acute ischemic stroke secondary to intracranial large vessel occlusive disease (within the internal carotid, middle cerebral - M1 and M2 segments, basilar, and vertebral arteries) within 8 hours of symptom onset. Patients who are ineligible for intravenous tissue plasminogen activator (IV t-PA) or who failed IV t-PA therapy are candidates for treatment. Aspiration Tubing: As part of the 072 Aspiration System, the Aspiration Tubing is intended to connect the 072 Aspiration Catheter to a compatible suction pump.” The 072 Aspiration System that was presented to us was cleared under K222786 with a design that included a catheter shaft with an inner diameter of 0.072 inch and an outer diameter of 0.0855 inch for the entire catheter working length. The submission that we numbered K222786 did not describe technological characteristics of the distal nitinol tip that would enable expansion of the distal tip to larger diameters or compression of the distal tip during clinical use. However, your firm’s promotion of the device and information collected during the inspection provides evidence that the device as it was designed and developed but not described in your submission includes a nitinol tip with technological characteristics that allow for expansion in diameter and compression in length, i.e., a device for which your firm lacks clearance or approval. Examples of the promotion and information include:\u003C\u002Fp>\u003Cul>\u003Cli>\u003Cstrong>(b)(4)\u003C\u002Fstrong> data report of tip compression testing (“Hippo Tip Vacuum Ball Testing”) was shared via emails exchanged within Q’Apel Medical \u003Cstrong>(b)(4)\u003C\u002Fstrong>. The data include tip diameter and length measurements of multiple catheter tips (“bad units” and “good units”) while vacuum was applied to a \u003Cstrong>(b)(4)\u003C\u002Fstrong> ball with a diameter larger than the HIPPO distal tip diameter. Multiple images show increased diameters of the distal region of the nitinol tip expanding around the surface of the \u003Cstrong>(b)(4)\u003C\u002Fstrong> ball with reported increases in diameters of \u003Cstrong>(b)(4)\u003C\u002Fstrong> for “good units” and increases in diameter of \u003Cstrong>(b)(4)\u003C\u002Fstrong> for “bad units.” The \u003Cstrong>(b)(4)\u003C\u002Fstrong> data reports tip diameters ranging from \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch with aspiration applied to the \u003Cstrong>(b)(4)\u003C\u002Fstrong> ball, compared to the relaxed tip diameter of \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch to \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch. The \u003Cstrong>(b)(4)\u003C\u002Fstrong> data reports accompanying changes in tip length of \u003Cstrong>(b)(4)\u003C\u002Fstrong> (relaxed tip lengths of \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch, compressed under ball aspiration to lengths of \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch) for “good units” and \u003Cstrong>(b)(4)\u003C\u002Fstrong> (relaxed tip lengths of \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch, compressed under ball aspiration to lengths of \u003Cstrong>(b)(4)\u003C\u002Fstrong> inch) for “bad units.” The distinction of “good units” and “bad units” is not described in the \u003Cstrong>(b)(4)\u003C\u002Fstrong> data. However, both “good units” and “bad units” describe evidence of increased HIPPO distal tip diameters and compressed tip lengths when aspiration was applied to the \u003Cstrong>(b)(4)\u003C\u002Fstrong> balls. The submission K222786 did not provide images or information to show expansion of the distal tantalum markers or compression of tip length of the nitinol tip as shown in the images included in the \u003Cstrong>(b)(4)\u003C\u002Fstrong> data of tip compression testing (“Hippo Tip Vacuum Ball Testing”).\u003C\u002Fli>\u003Cli>The “\u003Cstrong>(b)(4)\u003C\u002Fstrong>” includes a video on page 35 of 45 titled “Mechanism of action,” that shows the nitinol tip of the HIPPO catheter aspirating a simulated clot. The video shows the catheter tip compress near the mid-point of the nitinol tip structure (with possible increased diameter), while the distal tantalum petal markers are obscured by the simulated clot. A second distinct slow-motion video also titled, “Mechanism of action,” is included on page 36 of 45 of the “\u003Cstrong>(b)(4)\u003C\u002Fstrong>” that shows the nitinol tip of the HIPPO catheter aspirating a simulated clot. This video shows the HIPPO catheter tip prior to contact with the simulated clot and upon contact with the simulated clot, the distal tantalum petal markers on the most distal struts of the nitinol tip are shown to flare at the edges combined with longitudinal compression of the nitinol tip while aspiration is applied to the clot until the clot is fully ingested through the catheter lumen. Page 37 of 45 of the “\u003Cstrong>(b)(4)\u003C\u002Fstrong>” includes a slow-motion video titled, “Mechanism of action: RED 72,” that shows aspiration of simulated clot with the cleared RED 72 Reperfusion Catheter (K211654) that was cited as a reference device during review of K222786 for the 072 Aspiration System (HIPPO). The video of the RED 72 Reperfusion Catheter does not show compression of the catheter tip or expansion of the distal catheter tip as observed in the videos of the HIPPO device on pages 35 and 36 of 45 of the “\u003Cstrong>(b)(4)\u003C\u002Fstrong>.” Page 45 of 45 of the “\u003Cstrong>(b)(4)\u003C\u002Fstrong>” also includes a claim that the HIPPO provides “insightful navigation from a tip that flexes to any clot morphology.” The submission K222786 of the 072 Aspiration System (HIPPO) did not provide images that showed compression of the nitinol tip nor flaring of the distal petals of the nitinol tip as shown in videos presented in the “\u003Cstrong>(b)(4)\u003C\u002Fstrong>.”\u003Cbr>• Drawing CS00788, “072 Catheter Nitinol Tip,” descriptions in the “Design History” notes that revision E updates included, “\u003Cstrong>(b)(4)\u003C\u002Fstrong>.” The version of the drawing provided in K222786\u002FS001, Appendix 27, was revision D and did not include descriptions of \u003Cstrong>(b)(4)\u003C\u002Fstrong> specification changes or “\u003Cstrong>(b)(4)\u003C\u002Fstrong> compression testing with tip compression tool.” The “\u003Cstrong>(b)(4)\u003C\u002Fstrong>, CS 00788 Catheter Nitinol Tip,” document number QI 01560 describes \u003Cstrong>(b)(4)\u003C\u002Fstrong>. The images and test methods for compression of the nitinol tip were not described in drawing CS00788, revision D, provided in K222786. The submission K222786 otherwise did not provide images that showed compression of the nitinol tip as described in document QI 01560.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>During review of K222786, FDA asked for a description of the principle of operation and mechanism of action of the 072 Aspiration Catheter distal tip, including the tip dimensions related to the dimensions of the remainder of the catheter shaft, in the Refuse-to-Accept (RTA) notification dated September 30, 2022. The response provided in the document “002_Cover Letter_RTA_Final.pdf” of the K222786\u002FS001 submission dated October 24, 2022, stated that the 072 Aspiration Catheter tip had “\u003Cem>the same Internal (0.072”) and External (0.0855”) dimensions (ID, OD) as the rest of the catheter’s usable length. The length of the tip is \u003Cstrong>(b)(4)\u003C\u002Fstrong>”. The flexible tip is a passive structure that does not have an active mechanism of action and is not self-expanding\u003C\u002Fem>.” The information gathered in the inspection conducted July 29, 2024, through August 8, 2024, at your firm raises concerns that the information provided to FDA for review in K222786 did not accurately disclose the technological characteristics of the nitinol tip and the changes in diameter and length of the distal tip that could be exhibited during use conditions for aspiration of thrombus from patients experiencing acute ischemic stroke. These different technological characteristics of the nitinol tip to change in length and diameter constitute a change or modification in the device that could significantly affect the safety or effectiveness of the device (e.g., a significant change or modification in design, material, chemical composition, energy source, or manufacturing process) (21 CFR 807.81(a)(3)).\u003C\u002Fp>\u003Cp>For a device requiring premarket approval, the notification required by section 510(k) of the Act, 21 U.S.C. § 360(k), is deemed satisfied when a PMA is pending before the FDA. See 21 CFR 807.81(b). The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\u003C\u002Fp>\u003Cp>Our office requests that Q’Apel Medical cease any activities that result in the misbranding or adulteration of the 072 Aspiration System (HIPPO), such as the commercial distribution of the device for the uses discussed above.\u003C\u002Fp>\u003Cp>This inspection also revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, \u003Cu>Code of Federal Regulations\u003C\u002Fu> (CFR), Part 820.\u003C\u002Fp>\u003Cp>We received response from Jim Talbot, Vice President Regulatory, Quality, and Clinical Affairs dated August 28, 2024, September 26, 2024, and November 27, 2024, concerning our investigator’s observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, that was issued to your firm. We address this response below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\u003C\u002Fp>\u003Cp>1. Failure to adequately document design input requirements as required by 21 CFR 820.30(c).\u003C\u002Fp>\u003Cp>For example, your firm did not adequately define the physical, performance, and other design requirements for design inputs to include tip compression, aspiration\u002Fsuction pump, tip deflection, and treatment location for your firm’s 072 Aspiration System (Hippo), which are identified in your documents titled, Product Specification 072 Aspiration System (PS 00922, Rev. G) and Customer Requirement Specification Form (CRS 00848, Rev. D).\u003C\u002Fp>\u003Cp>We reviewed your firm’s response and conclude that it is not adequate. Your firm has not adequately defined specifications for tip elongation and compression (PS-11.5.2), aspiration flow rate (PS-11.5.3) and tip deflection (PS-11.5.9) that are identified in your document titled, Product Specification, PS 00922, Revision H.\u003C\u002Fp>\u003Cp>Your firm provided the document titled, Draft Research Report, Aspiration System, Aspiration Flowrate Acceptance Criteria, RR 02139, in your response dated August 28, 2024. This document appears to leverage previous testing of the Aspiration flowrate to define measurable acceptance criteria for future Aspiration Flowrate testing. The comparative device testing was conducted on a sample size of three \u003Cstrong>(b)(4)\u003C\u002Fstrong>. The conclusion states an acceptance interval for the average flow rate is \u003Cstrong>(b)(4)\u003C\u002Fstrong>. This value was not reflected in your Product Specification documentation or the Test Protocol, TP 00927, which is to be executed for future verification testing by a third-party service provider. It is not clear what this data will be used for.\u003C\u002Fp>\u003Cp>Please evaluate the adequacy of your corrective actions related to design inputs and continue to provide us information related to your ongoing corrective actions.\u003C\u002Fp>\u003Cp>2. Failure to adequately establish and maintain procedures for design verification as required by 21 CFR 820.30(f).\u003C\u002Fp>\u003Cp>For example, your firm did not adequately define acceptance criteria that can be verified for Aspiration Flowrate, Tip Deflection, and Tip Compression and Elongation in your protocol titled, Test Protocol, Device Performance Design Verification Validation, FG 00806, FG 00995 (TP 00927, Rev. C).\u003C\u002Fp>\u003Cp>Additionally, the verification test performed for Aspiration Flowrate and documented in Test Report 072 Aspiration System, Design Verification Validation, FG00806, FG 00995, Aspiration Flowrate (TR 00927-15, Rev. A), was conducted using \u003Cstrong>(b)(4)\u003C\u002Fstrong> vacuum setting, whereas the Instructions for Use for the device describes \u003Cstrong>(b)(4)\u003C\u002Fstrong> vacuum settings the device can be used with. There is no documented rationale to justify why testing flowrate at \u003Cstrong>(b)(4)\u003C\u002Fstrong> setting is adequate.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response and conclude that it is not adequate. Your firm still has not implemented your design control procedure, in that your design verification protocol continues to not establish acceptance criteria for specifications to include tip deflection, elongation and compression, and aspiration flow rate that can be verified. Additionally, your firm’s rationale for testing a \u003Cstrong>(b)(4)\u003C\u002Fstrong> vacuum pressure is inadequate. Verification testing should be performed for all \u003Cstrong>(b)(4)\u003C\u002Fstrong> ranges utilized by the device.\u003C\u002Fp>\u003Cp>Your firm stated that you are \u003Cstrong>(b)(4)\u003C\u002Fstrong>. However, the Test Report has not been provided to FDA.\u003C\u002Fp>\u003Cp>Please evaluate the adequacy of your corrective actions related to design verification and continue to provide us information related to your ongoing corrective actions.\u003C\u002Fp>\u003Cp>3. Failure to adequately establish and maintain procedures for design change as required by 21 CFR 820.30(i).\u003C\u002Fp>\u003Cp>For example, your firm has not implemented your procedure for design changes titled, Design Control (SOP 00003, Rev. C, effective date 02\u002F01\u002F2021 &amp; Rev. D, effective date 11\u002F14\u002F2022) (revisions in effect when design changes were processed), which states that design changes are subject to original verification or validation tests and if no test(s) or a subset is planned, a justification is required. Specifically, your firm has not evaluated the impact changes may have to original verification or validation tests or provided a justification if no test(s) or a subset is required. Design changes were made to update the specification for your 072 Cather, Nitinol Tip \u003Cstrong>(b)(4)\u003C\u002Fstrong> (under ECO 1142) and to update the \u003Cstrong>(b)(4)\u003C\u002Fstrong> specification (under ECO 1360) \u003Cstrong>(b)(4)\u003C\u002Fstrong> acceptability range \u003Cstrong>(b)(4)\u003C\u002Fstrong>. No assessment was documented of the potential impact the changes could have on completed verification and\u002For validation tests.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response and conclude that it is not adequate. Your firm’s reevaluation of ECO 1360 states that the firm’s risk management document, RM 00951, Design FMEA, 072 Aspiration System, was updated in ECO 1300 to capture the new risk identified with SA 00570 \u003Cstrong>(b)(4)\u003C\u002Fstrong>. It further states that testing was performed via \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm determined that verification and\u002For validation testing was not required. This assessment is inadequate. Testing should be documented and performed according to a defined protocol.\u003C\u002Fp>\u003Cp>Please evaluate the adequacy of your corrective actions related to design changes and continue to provide us information related to your ongoing corrective actions.\u003C\u002Fp>\u003Cp>4. Failure to adequately establish and maintain procedures for receiving, reviewing, and evaluating complaints by a formally designated unit as required by 21 CFR 820.198(a).\u003C\u002Fp>\u003Cp>For example, your firm has not adequately implemented your complaint procedure, Complaint Handling and Customer Feedback (SOP 00148, Rev. M, effective date 02\u002F27\u002F2024), which requires returned product analysis to be completed within 30 days after receiving the product from the field. Specifically,\u003C\u002Fp>\u003Cul>\u003Cli>CN 0251 was opened to document a complaint reporting resistance was felt while the Hippo 072 Aspiration Catheter was inside an access catheter. The associated complaint product was received by your firm on 06\u002F12\u002F2024 under RMA0494 and logged in RMA log. As of 08\u002F02\u002F2024 the complaint product has not been investigated.\u003C\u002Fli>\u003Cli>CN 0252 was opened to document a complaint reporting stretching on the distal portion of the 072 Aspiration Tubing. The associated complaint product was received by your firm on 06\u002F27\u002F2024 under RMA0493 and logged in RMA log. As of 08\u002F02\u002F2024 the complaint product has not been investigated.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>We reviewed your firm’s response and conclude that it is not adequate. Removing the 30-day timeframe for completing the returned product analysis may impact your firm’s assessment of complaints that are determined to be malfunctions and thus your firm’s adherence to reporting timeframes required as part of the Medical Device Reporting (MDR) Regulation (see 21 CFR Part 803). Your firm should provide a risk-based justification for the removal of the requirement and evaluate complaints to determine if any unreported MDRs were found.\u003C\u002Fp>\u003Cp>5. Failure to adequately establish and maintain procedures for document control as required by 21 CFR 820.40.\u003C\u002Fp>\u003Cp>For example, your firm did not adequately implement your document control procedures as outlined in \u003Cstrong>(b)(4)\u003C\u002Fstrong> (SOP 00002, Rev. R, effective date 05\u002F24\u002F2024 (current revision), Rev. P, effective date 02\u002F02\u002F2024, and Rev. N, effective date 07\u002F14\u002F2023. Section 6.1 of your procedure titled \u003Cstrong>(b)(4)\u003C\u002Fstrong> (SOP 00460, Rev, A, effective date 9\u002F14\u002F2020) \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Specifically, the following promotional material for the 072 Aspiration System (Hippo) was not developed and approved per the firm’s document control procedures:\u003C\u002Fp>\u003Cul>\u003Cli>A video clip depicting the tip of the Hippo aspiration catheter flaring out\u003C\u002Fli>\u003Cli>A video clip referring the to the Hippo aspiration catheter tip as adaptive, depicting the tip of the Hippo aspiration catheter flaring out, and referencing R&amp;D Aspiration Grip Force data\u003C\u002Fli>\u003Cli>A press release announcing the clearance of the Hippo 072 Aspiration System that describes the aspiration tip as adaptive\u003C\u002Fli>\u003C\u002Ful>\u003Cp>We reviewed your firm’s response and cannot determine the adequacy at this time. Your firm extended the target completion date to 11\u002F25\u002F2025, for compiling of a list of marketing\u002F promotional content for their Armadillo and Walrus devices and evaluating if product claims were found. \u003Cstrong>(b)(4)\u003C\u002Fstrong>; therefore, we request that you continue to provide information related to the \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fp>\u003Cp>Your firm should take prompt action to address any violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\u003C\u002Fp>\u003Cp>Other federal agencies may take your compliance with the FD&amp;C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\u003C\u002Fp>\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\u003Cp>Your firm’s response should be sent via e-mail to: Jessica Mu, Assistant Director at CDRHWarningLetterResponses@fda.hhs.gov. Refer to the Unique Identification Number, \u003Cstrong>CMS # 699244\u003C\u002Fstrong>, when replying. If you have any questions about the contents of this letter, please contact: Shaquenta Perkins at shaquenta.perkins@fda.hhs.gov or 619-941-3763.\u003C\u002Fp>\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\u003C\u002Fp>\u003Cp>Sincerely yours,\u003Cbr>\u002FS\u002F\u003C\u002Fp>\u003Cp>RDML Sean M. Boyd, MPH, USPHS\u003Cbr>Director\u003Cbr>Office of Regulatory Programs\u003Cbr>Office of Product Evaluation and Quality\u003Cbr>Center for Devices and Radiological Health\u003C\u002Fp>\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVIA Electronic Mail\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nJodie C. Fam\n\nRecipient Title\n\nChief Executive Officer\n\nQ’Apel Medical, Inc.\n\n4245 Technology Drive\n\nFremont, CA 94538\n\nUnited States\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nWARNING LETTER\nFebruary 5, 2025\nDear Ms. Fam:\nDuring an inspection of your firm located in Fremont, CA on July 29, 2024, through August 8, 2024, investigators from the United States Food and Drug Administration (FDA) determined that your firm manufactures the 072 Aspiration System (also marketed under the trade name “HIPPO”). Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\nFDA has reviewed information collected during the inspection of your firm located in Fremont, California on July 29, 2024, through August 8, 2024, and determined that the 072 Aspiration System (HIPPO) is adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. §351(f)(1)(B), because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption (IDE) under section 520(g) of the Act, 21 U.S.C. § 360j(g), for the device as described and marketed. The device is also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the device into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C.\nSpecifically, FDA cleared, under K222786, the device that you identified in your submission to the agency as the 072 Aspiration System with the following indications, “072 Aspiration Catheter: As part of the 072 Aspiration System, the 072 Aspiration Catheter with a compatible suction pump is indicated for use in the revascularization of patients with acute ischemic stroke secondary to intracranial large vessel occlusive disease (within the internal carotid, middle cerebral - M1 and M2 segments, basilar, and vertebral arteries) within 8 hours of symptom onset. Patients who are ineligible for intravenous tissue plasminogen activator (IV t-PA) or who failed IV t-PA therapy are candidates for treatment. Aspiration Tubing: As part of the 072 Aspiration System, the Aspiration Tubing is intended to connect the 072 Aspiration Catheter to a compatible suction pump.” The 072 Aspiration System that was presented to us was cleared under K222786 with a design that included a catheter shaft with an inner diameter of 0.072 inch and an outer diameter of 0.0855 inch for the entire catheter working length. The submission that we numbered K222786 did not describe technological characteristics of the distal nitinol tip that would enable expansion of the distal tip to larger diameters or compression of the distal tip during clinical use. However, your firm’s promotion of the device and information collected during the inspection provides evidence that the device as it was designed and developed but not described in your submission includes a nitinol tip with technological characteristics that allow for expansion in diameter and compression in length, i.e., a device for which your firm lacks clearance or approval. Examples of the promotion and information include:\n(b)(4) data report of tip compression testing (“Hippo Tip Vacuum Ball Testing”) was shared via emails exchanged within Q’Apel Medical (b)(4). The data include tip diameter and length measurements of multiple catheter tips (“bad units” and “good units”) while vacuum was applied to a (b)(4) ball with a diameter larger than the HIPPO distal tip diameter. Multiple images show increased diameters of the distal region of the nitinol tip expanding around the surface of the (b)(4) ball with reported increases in diameters of (b)(4) for “good units” and increases in diameter of (b)(4) for “bad units.” The (b)(4) data reports tip diameters ranging from (b)(4) inch with aspiration applied to the (b)(4) ball, compared to the relaxed tip diameter of (b)(4) inch to (b)(4) inch. The (b)(4) data reports accompanying changes in tip length of (b)(4) (relaxed tip lengths of (b)(4) inch, compressed under ball aspiration to lengths of (b)(4) inch) for “good units” and (b)(4) (relaxed tip lengths of (b)(4) inch, compressed under ball aspiration to lengths of (b)(4) inch) for “bad units.” The distinction of “good units” and “bad units” is not described in the (b)(4) data. However, both “good units” and “bad units” describe evidence of increased HIPPO distal tip diameters and compressed tip lengths when aspiration was applied to the (b)(4) balls. The submission K222786 did not provide images or information to show expansion of the distal tantalum markers or compression of tip length of the nitinol tip as shown in the images included in the (b)(4) data of tip compression testing (“Hippo Tip Vacuum Ball Testing”).\nThe “(b)(4)” includes a video on page 35 of 45 titled “Mechanism of action,” that shows the nitinol tip of the HIPPO catheter aspirating a simulated clot. The video shows the catheter tip compress near the mid-point of the nitinol tip structure (with possible increased diameter), while the distal tantalum petal markers are obscured by the simulated clot. A second distinct slow-motion video also titled, “Mechanism of action,” is included on page 36 of 45 of the “(b)(4)” that shows the nitinol tip of the HIPPO catheter aspirating a simulated clot. This video shows the HIPPO catheter tip prior to contact with the simulated clot and upon contact with the simulated clot, the distal tantalum petal markers on the most distal struts of the nitinol tip are shown to flare at the edges combined with longitudinal compression of the nitinol tip while aspiration is applied to the clot until the clot is fully ingested through the catheter lumen. Page 37 of 45 of the “(b)(4)” includes a slow-motion video titled, “Mechanism of action: RED 72,” that shows aspiration of simulated clot with the cleared RED 72 Reperfusion Catheter (K211654) that was cited as a reference device during review of K222786 for the 072 Aspiration System (HIPPO). The video of the RED 72 Reperfusion Catheter does not show compression of the catheter tip or expansion of the distal catheter tip as observed in the videos of the HIPPO device on pages 35 and 36 of 45 of the “(b)(4).” Page 45 of 45 of the “(b)(4)” also includes a claim that the HIPPO provides “insightful navigation from a tip that flexes to any clot morphology.” The submission K222786 of the 072 Aspiration System (HIPPO) did not provide images that showed compression of the nitinol tip nor flaring of the distal petals of the nitinol tip as shown in videos presented in the “(b)(4).”\n• Drawing CS00788, “072 Catheter Nitinol Tip,” descriptions in the “Design History” notes that revision E updates included, “(b)(4).” The version of the drawing provided in K222786\u002FS001, Appendix 27, was revision D and did not include descriptions of (b)(4) specification changes or “(b)(4) compression testing with tip compression tool.” The “(b)(4), CS 00788 Catheter Nitinol Tip,” document number QI 01560 describes (b)(4). The images and test methods for compression of the nitinol tip were not described in drawing CS00788, revision D, provided in K222786. The submission K222786 otherwise did not provide images that showed compression of the nitinol tip as described in document QI 01560.\nDuring review of K222786, FDA asked for a description of the principle of operation and mechanism of action of the 072 Aspiration Catheter distal tip, including the tip dimensions related to the dimensions of the remainder of the catheter shaft, in the Refuse-to-Accept (RTA) notification dated September 30, 2022. The response provided in the document “002_Cover Letter_RTA_Final.pdf” of the K222786\u002FS001 submission dated October 24, 2022, stated that the 072 Aspiration Catheter tip had “the same Internal (0.072”) and External (0.0855”) dimensions (ID, OD) as the rest of the catheter’s usable length. The length of the tip is (b)(4)”. The flexible tip is a passive structure that does not have an active mechanism of action and is not self-expanding.” The information gathered in the inspection conducted July 29, 2024, through August 8, 2024, at your firm raises concerns that the information provided to FDA for review in K222786 did not accurately disclose the technological characteristics of the nitinol tip and the changes in diameter and length of the distal tip that could be exhibited during use conditions for aspiration of thrombus from patients experiencing acute ischemic stroke. These different technological characteristics of the nitinol tip to change in length and diameter constitute a change or modification in the device that could significantly affect the safety or effectiveness of the device (e.g., a significant change or modification in design, material, chemical composition, energy source, or manufacturing process) (21 CFR 807.81(a)(3)).\nFor a device requiring premarket approval, the notification required by section 510(k) of the Act, 21 U.S.C. § 360(k), is deemed satisfied when a PMA is pending before the FDA. See 21 CFR 807.81(b). The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fdefault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\nOur office requests that Q’Apel Medical cease any activities that result in the misbranding or adulteration of the 072 Aspiration System (HIPPO), such as the commercial distribution of the device for the uses discussed above.\nThis inspection also revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820.\nWe received response from Jim Talbot, Vice President Regulatory, Quality, and Clinical Affairs dated August 28, 2024, September 26, 2024, and November 27, 2024, concerning our investigator’s observations noted on the Form FDA 483 (FDA 483), List of Inspectional Observations, that was issued to your firm. We address this response below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\n1. Failure to adequately document design input requirements as required by 21 CFR 820.30(c).\nFor example, your firm did not adequately define the physical, performance, and other design requirements for design inputs to include tip compression, aspiration\u002Fsuction pump, tip deflection, and treatment location for your firm’s 072 Aspiration System (Hippo), which are identified in your documents titled, Product Specification 072 Aspiration System (PS 00922, Rev. G) and Customer Requirement Specification Form (CRS 00848, Rev. D).\nWe reviewed your firm’s response and conclude that it is not adequate. Your firm has not adequately defined specifications for tip elongation and compression (PS-11.5.2), aspiration flow rate (PS-11.5.3) and tip deflection (PS-11.5.9) that are identified in your document titled, Product Specification, PS 00922, Revision H.\nYour firm provided the document titled, Draft Research Report, Aspiration System, Aspiration Flowrate Acceptance Criteria, RR 02139, in your response dated August 28, 2024. This document appears to leverage previous testing of the Aspiration flowrate to define measurable acceptance criteria for future Aspiration Flowrate testing. The comparative device testing was conducted on a sample size of three (b)(4). The conclusion states an acceptance interval for the average flow rate is (b)(4). This value was not reflected in your Product Specification documentation or the Test Protocol, TP 00927, which is to be executed for future verification testing by a third-party service provider. It is not clear what this data will be used for.\nPlease evaluate the adequacy of your corrective actions related to design inputs and continue to provide us information related to your ongoing corrective actions.\n2. Failure to adequately establish and maintain procedures for design verification as required by 21 CFR 820.30(f).\nFor example, your firm did not adequately define acceptance criteria that can be verified for Aspiration Flowrate, Tip Deflection, and Tip Compression and Elongation in your protocol titled, Test Protocol, Device Performance Design Verification Validation, FG 00806, FG 00995 (TP 00927, Rev. C).\nAdditionally, the verification test performed for Aspiration Flowrate and documented in Test Report 072 Aspiration System, Design Verification Validation, FG00806, FG 00995, Aspiration Flowrate (TR 00927-15, Rev. A), was conducted using (b)(4) vacuum setting, whereas the Instructions for Use for the device describes (b)(4) vacuum settings the device can be used with. There is no documented rationale to justify why testing flowrate at (b)(4) setting is adequate.\nWe reviewed your firm’s response and conclude that it is not adequate. Your firm still has not implemented your design control procedure, in that your design verification protocol continues to not establish acceptance criteria for specifications to include tip deflection, elongation and compression, and aspiration flow rate that can be verified. Additionally, your firm’s rationale for testing a (b)(4) vacuum pressure is inadequate. Verification testing should be performed for all (b)(4) ranges utilized by the device.\nYour firm stated that you are (b)(4). However, the Test Report has not been provided to FDA.\nPlease evaluate the adequacy of your corrective actions related to design verification and continue to provide us information related to your ongoing corrective actions.\n3. Failure to adequately establish and maintain procedures for design change as required by 21 CFR 820.30(i).\nFor example, your firm has not implemented your procedure for design changes titled, Design Control (SOP 00003, Rev. C, effective date 02\u002F01\u002F2021 & Rev. D, effective date 11\u002F14\u002F2022) (revisions in effect when design changes were processed), which states that design changes are subject to original verification or validation tests and if no test(s) or a subset is planned, a justification is required. Specifically, your firm has not evaluated the impact changes may have to original verification or validation tests or provided a justification if no test(s) or a subset is required. Design changes were made to update the specification for your 072 Cather, Nitinol Tip (b)(4) (under ECO 1142) and to update the (b)(4) specification (under ECO 1360) (b)(4) acceptability range (b)(4). No assessment was documented of the potential impact the changes could have on completed verification and\u002For validation tests.\nWe reviewed your firm’s response and conclude that it is not adequate. Your firm’s reevaluation of ECO 1360 states that the firm’s risk management document, RM 00951, Design FMEA, 072 Aspiration System, was updated in ECO 1300 to capture the new risk identified with SA 00570 (b)(4). It further states that testing was performed via (b)(4). Your firm determined that verification and\u002For validation testing was not required. This assessment is inadequate. Testing should be documented and performed according to a defined protocol.\nPlease evaluate the adequacy of your corrective actions related to design changes and continue to provide us information related to your ongoing corrective actions.\n4. Failure to adequately establish and maintain procedures for receiving, reviewing, and evaluating complaints by a formally designated unit as required by 21 CFR 820.198(a).\nFor example, your firm has not adequately implemented your complaint procedure, Complaint Handling and Customer Feedback (SOP 00148, Rev. M, effective date 02\u002F27\u002F2024), which requires returned product analysis to be completed within 30 days after receiving the product from the field. Specifically,\nCN 0251 was opened to document a complaint reporting resistance was felt while the Hippo 072 Aspiration Catheter was inside an access catheter. The associated complaint product was received by your firm on 06\u002F12\u002F2024 under RMA0494 and logged in RMA log. As of 08\u002F02\u002F2024 the complaint product has not been investigated.\nCN 0252 was opened to document a complaint reporting stretching on the distal portion of the 072 Aspiration Tubing. The associated complaint product was received by your firm on 06\u002F27\u002F2024 under RMA0493 and logged in RMA log. As of 08\u002F02\u002F2024 the complaint product has not been investigated.\nWe reviewed your firm’s response and conclude that it is not adequate. Removing the 30-day timeframe for completing the returned product analysis may impact your firm’s assessment of complaints that are determined to be malfunctions and thus your firm’s adherence to reporting timeframes required as part of the Medical Device Reporting (MDR) Regulation (see 21 CFR Part 803). Your firm should provide a risk-based justification for the removal of the requirement and evaluate complaints to determine if any unreported MDRs were found.\n5. Failure to adequately establish and maintain procedures for document control as required by 21 CFR 820.40.\nFor example, your firm did not adequately implement your document control procedures as outlined in (b)(4) (SOP 00002, Rev. R, effective date 05\u002F24\u002F2024 (current revision), Rev. P, effective date 02\u002F02\u002F2024, and Rev. N, effective date 07\u002F14\u002F2023. Section 6.1 of your procedure titled (b)(4) (SOP 00460, Rev, A, effective date 9\u002F14\u002F2020) (b)(4). Specifically, the following promotional material for the 072 Aspiration System (Hippo) was not developed and approved per the firm’s document control procedures:\nA video clip depicting the tip of the Hippo aspiration catheter flaring out\nA video clip referring the to the Hippo aspiration catheter tip as adaptive, depicting the tip of the Hippo aspiration catheter flaring out, and referencing R&D Aspiration Grip Force data\nA press release announcing the clearance of the Hippo 072 Aspiration System that describes the aspiration tip as adaptive\nWe reviewed your firm’s response and cannot determine the adequacy at this time. Your firm extended the target completion date to 11\u002F25\u002F2025, for compiling of a list of marketing\u002F promotional content for their Armadillo and Walrus devices and evaluating if product claims were found. (b)(4); therefore, we request that you continue to provide information related to the (b)(4).\nYour firm should take prompt action to address any violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\nOther federal agencies may take your compliance with the FD&C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration as part of your response.\nYour firm’s response should be sent via e-mail to: Jessica Mu, Assistant Director at CDRHWarningLetterResponses@fda.hhs.gov. Refer to the Unique Identification Number, CMS # 699244, when replying. If you have any questions about the contents of this letter, please contact: Shaquenta Perkins at shaquenta.perkins@fda.hhs.gov or 619-941-3763.\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\nSincerely yours,\n\u002FS\u002F\nRDML Sean M. Boyd, MPH, USPHS\nDirector\nOffice of Regulatory Programs\nOffice of Product Evaluation and Quality\nCenter for Devices and Radiological Health","Q’Apel Medical, Inc.","qapel-medical-inc-699244-02052025","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fqapel-medical-inc-699244-02052025","2026-10-26T08:09:46.009809+00:00","2025-03-11","699244","Jodie C. Fam","2026-08-19T16:59:01.909+00:00","2025-02-05",4,{"510k":95,"classification":96,"enforcement":97,"event":98,"event_backfill":99,"pma":100,"warning_letter":101},"2026-11-16T02:00:55.89+00:00","2026-11-16T02:00:41.999+00:00","2026-11-16T02:00:49.415+00:00","2026-11-17T04:00:34.414+00:00","2026-09-07T05:17:28.839+00:00","2026-11-16T02:01:03.155+00:00","2026-11-17T01:02:55.859+00:00"]