[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"fda-warning-letters-search:[\"LABORIE MEDICAL TECHNOLOGIES, CANADA ULC\",\"\",\"\",\"\",\"\",1]":3,"fda-latest-sync-dates":171},{"warningLetters":4,"total":170},[5,33,54,72,89,111,131,151],{"id":6,"raw":7,"subject":12,"body_html":15,"body_text":16,"firm_name":17,"letter_id":18,"created_at":19,"fei_number":20,"letter_url":21,"updated_at":22,"action_type":23,"case_status":24,"posted_date":25,"marcs_cms_no":26,"product_type":27,"closeout_date":28,"issuing_office":11,"recipient_name":29,"body_fetched_at":30,"delivery_method":31,"recipient_title":20,"reference_number":20,"action_taken_date":32,"medical_device_id":20,"response_letter_date":20},3079,[8,9,10,11,12,13,14,13],"\u003Ctime datetime=\"2021-10-19T13:20:00Z\">10\u002F19\u002F2021\u003C\u002Ftime>\n","\u003Ctime datetime=\"2021-09-17T04:00:00Z\">09\u002F17\u002F2021\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fmagnolia-medical-technologies-inc-617922-09172021\">Magnolia Medical Technologies, Inc.\u003C\u002Fa>","Office of Medical Devices and Radiological Health, Division 3","CGMP\u002FQSR\u002FMedical Devices\u002FAdulterated","","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fmagnolia-medical-technologies-inc-617922-05042022\">\u003Ctime datetime=\"2022-05-18T04:00:00Z\">05\u002F18\u002F2022\u003C\u002Ftime>\n\u003C\u002Fa>","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>VIA Electronic Mail\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Gregory J. Bullington\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>CEO\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Magnolia Medical Technologies, Inc.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>200 W. Mercer Street, Suite 500\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Seattle\u003C\u002Fspan>, \u003Cspan>WA\u003C\u002Fspan> \u003Cspan>98119\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:Greg.bullington@magnolia-medical.com\"> Greg.bullington@magnolia-medical.com\u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Office of Medical Devices and Radiological Health, Division 3\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003Cbr>\nCMS 617922\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>September 17, 2021\u003Cbr>\n\u003Cbr>\nDear Mr. Bullington:\u003C\u002Fp>\n\n\u003Cp>The United States Food and Drug Administration (FDA) conducted an inspection of your medical device operations at 200 W. Mercer Street, Suite 500, Seattle, WA 98119 from June 3, 2021 through July 15, 2021. During the inspection, an FDA Investigator determined that your firm is a specification developer for the Steripath Gen 2 Blood Collection System (K192247). Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or function of the body.\u003C\u002Fp>\n\n\u003Cp>This inspection revealed that the Steripath Gen 2 device is adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. We received your firm’s response dated August 5, 2021 concerning our Investigator’s observations noted on the Form FDA 483, List of Inspectional Observations (FDA 483) that was issued on July 15, 2021. We address the responses below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\u003C\u002Fp>\n\n\u003Cp>1. Failure to establish and maintain adequate procedures for implementing corrective and preventive action, as required by 21 CFR 820.100(a). For example,\u003C\u002Fp>\n\n\u003Cp>a. Your firm’s Corrective and Preventive Action SOP, D00011, Rev. D requires your firm to track all meetings pertaining to your CAPA activities in the product investigation section of your Corrective Action Report (CAR). Your firm’s HHE-001 Closure Memo dated January 13, 2021 references meetings held to discuss CAR C00046 on October 8, 2020 and in November 2020. However, these meetings are not described or attached to your CAR C00046.\u003C\u002Fp>\n\n\u003Cp>We have reviewed your firm’s response dated August 5, 2021 and determined it is inadequate. Your firm’s response acknowledges these meetings were held and states the meeting minutes were never finalized. Your response states your CAPA procedures will be revised to clarify requirements for maintaining meeting minutes. However, your response does not identify that your firm has now finalized and included in your records the subject meeting minutes. Further, your response does not address how your firm evaluated other CARs for similar deficiencies. Lastly, we acknowledge your firm’s commitment to revise your CAPA procedures, however, there is insufficient detail of the proposed changes in your response to allow us to evaluate the adequacy at this time.\u003C\u002Fp>\n\n\u003Cp>b. Your firm’s CAPA C00046 includes an investigation conducted by your supplier of your butterfly retractable needles for premature retraction. This investigation identified three potential causes including 1) \u003Cstrong>(b)(4)\u003C\u002Fstrong>, 2) application of \u003Cstrong>(b)(4)\u003C\u002Fstrong> sterilization, and 3) failure to adhere to shelf-life specifications assigned by the component supplier. Your firm’s CAPA C00046 includes your firm’s evaluation of the primary cause (\u003Cstrong>(b)(4)\u003C\u002Fstrong>); however, your firm did not investigate or document your evaluation of the other potential causes.\u003C\u002Fp>\n\n\u003Cp>We have reviewed your response dated August 5, 2021 and determined it is inadequate. Your response states your firm is revising your CAPA procedures. Your response states your firm held several meetings to discuss these causes; however, it does not identify how you have documented and included your evaluations and investigations into these cases in your CAR C00046. Additionally, your response does not address if your firm has reviewed other CARs for similar deficiencies.\u003C\u002Fp>\n\n\u003Cp>Additionally, in your response to this letter, please also include description and records of corrective actions or evaluations conducted into the acceptance activities and purchasing controls associated with your butterfly retractable needles.\u003C\u002Fp>\n\n\u003Cp>c. Your firm initiated CAR C00050 on August 20, 2020 after identifying the bill of materials for product parts \u003Cstrong>(b)(4)\u003C\u002Fstrong> (various configurations of your Steripath Gen 2 device) contained incorrect instruction for use (IFU) designations. This CAR was closed on April 29, 2021 stating it did not qualify for a CAR because it was identified prior to implementation of the changes. However, your firm identified in October 2020, two additional lots of product (\u003Cstrong>(b)(4)\u003C\u002Fstrong> and \u003Cstrong>(b)(4)\u003C\u002Fstrong>) were manufactured and subsequently quarantined and reworked. Additionally, our inspection identified that a third lot, 9448037, was manufactured and distributed using the incorrect IFU that your firm did not identify prior to distribution. Your firm’s CAR C00050 did not include adequate investigation to identify and correct all affected products.\u003C\u002Fp>\n\n\u003Cp>We have reviewed your response dated August 5, 2021 and determined it is inadequate. Your response states your firm is revising your CAPA procedures and has opened CAR C00073 to investigate the CAPA deficiencies. However, there is inadequate description of the proposed changes for us to evaluate the adequacy at this time. Additionally, your response does not address evaluations of other CARs to determine if similar deficiencies exist.\u003C\u002Fp>\n\n\u003Cp>d. Your firm initiated CAR C00055 on January 8, 2021 to investigate lack of implementation of changes to your Steripath Gen 2 labeling after receiving clearance for expanded indications for use. Your CAR C00055 does not include descriptions and records of your investigation into the cause of the nonconformance to ensure systemic corrective actions.\u003C\u002Fp>\n\n\u003Cp>We have reviewed your response dated August 5, 2021 and determined it is inadequate. We acknowledge you have initiated a removal for this product and your response states your firm is revising your CAPA procedures. However, your response does not address what corrective actions you are taking to specifically address CAR C00055. Additionally, your response does not address reviews of other CARs to determine if similar deficiencies exist.\u003C\u002Fp>\n\n\u003Cp>2. Failure to establish and maintain adequate procedures for verifying the device design to confirm that the design output meets the design input requirements, as required by 21 CFR 820.30(f).\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm did not conduct verification testing to support the shelf life of your Steripath Gen 2 with the butterfly needle inlet accessory.\u003C\u002Fp>\n\n\u003Cp>We have reviewed your response dated August 5, 2021 and the “Steripath Gen2 Blood Collection Set (Needle) Configuration Shelf Life Verification Report”, D00309, Rev. A dated June 11, 2021. We cannot determine the adequacy of your response at this time. Your firm’s response states your firm will conduct a retrospective review of all verifications of your Steripath Gen 2 device to assess the impact of using the \u003Cstrong>(b)(4)\u003C\u002Fstrong> inlet accessory as the model in the testing. Additionally, your response states your firm is updating your design verification procedures to require evaluation of the inlet and outlet accessories. We request you provide updates to these activities in your response to this letter. Additionally, the provided verification report shows sections 2.4.2, 2.4.3, and 2.4.4 of the test protocol were not complete. In your response to this letter, please include an explanation of why these sections were not completed.\u003C\u002Fp>\n\n\u003Cp>3. Failure to develop, conduct, control, and monitor production processes to ensure that a device conforms to its specifications, as required by 21 CFR 820.70(a).\u003C\u002Fp>\n\n\u003Cp>Specifically, your firm’s supplier of the butterfly needle inlet of your Steripath Gen 2 device applies a 2-year shelf life to the component. Your firm does not have manufacturing procedures to document and control the remaining shelf life of these components when used in the manufacturing of Steripath Gen 2 finished device which you apply a 2-year shelf life.\u003C\u002Fp>\n\n\u003Cp>We have reviewed your response dated August 5, 2021 and we cannot determine the adequacy of your response at this time. Your response commits to reviewing all components of your Steripath Gen 2 device and establish procedures to monitor and control remaining shelf life at the time of manufacturing the device. In response to this letter please include updates and supporting records of implementation of these corrective actions as they progress.\u003C\u002Fp>\n\n\u003Cp>Your firm should take prompt action to correct the violations addressed in this letter. Failure to promptly correct these violations may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties. Also, federal agencies may be advised of the issuance of Warning Letters about devices so that they may take this information into account when considering the award of contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been corrected. Also, should FDA determine that your devices do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted. If you believe that your products are not in violation of the Act, please respond to FDA with your reasoning and any supporting information for our consideration.\u003C\u002Fp>\n\n\u003Cp>Additionally, On July 7, 2021, FDA held a conference call with your firm’s Director of Operations and your firm’s Director of Quality and Regulatory to discuss concerns pertaining to your firm’s corrective actions associated with CAR C00046. During this call it was communicated to you that your firm’s CAR C00046 did not document corrective actions to address previously distributed nonconforming products. Your firm’s Director of Operations stated that a timeline of the corrective actions and the investigation addressing these concerns would be provided to the Agency. We have reviewed your firm’s memorandum dated July 12, 2021, and we do not believe the response adequately addresses those concerns. We request a conference call to further discuss your corrective actions to CAR 00046 with our Office of Medical Device and Radiological Health Operations Division 3. Please contact Compliance Officer Jeff R. Wooley to arrange a time for this call.\u003C\u002Fp>\n\n\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to correct the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address all violations included in this Warning Letter.\u003C\u002Fp>\n\n\u003Cp>Your response should be sent to: US Food and Drug Administration, Division 3\u002FWest, Office of Medical Device and Radiological Health Operations at \u003Cstrong>ORADevices3 FirmResponse@fda.hhs.gov\u003C\u002Fstrong>. Please identify your response with FEI 3009976527.\u003C\u002Fp>\n\n\u003Cp>If you have any questions about the contents of this letter, please contact Compliance Officer Jeff R. Wooley at 214-253-5251, or via e-mail at jeffrey.wooley@fda.hhs.gov.\u003C\u002Fp>\n\n\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of the violations and take prompt actions to correct the violations and bring the products into compliance.\u003C\u002Fp>\n\n\u003Cp>Sincerely,\u003Cbr>\n\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>Shari J. Shambaugh\u003Cbr>\nProgram Division Director\u003Cbr>\nOffice of Medical Devices and Radiological\u003Cbr>\nHealth, Division 3\u003C\u002Fp>\n\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVIA Electronic Mail\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nGregory J. Bullington\n\nRecipient Title\n\nCEO\n\nMagnolia Medical Technologies, Inc.\n\n200 W. Mercer Street, Suite 500\n\nSeattle, WA 98119\n\nUnited States\n\nGreg.bullington@magnolia-medical.com\n\nIssuing Office:\n\nOffice of Medical Devices and Radiological Health, Division 3\n\nUnited States\n\nWARNING LETTER\n\nCMS 617922\n\nSeptember 17, 2021\n\nDear Mr. Bullington:\n\nThe United States Food and Drug Administration (FDA) conducted an inspection of your medical device operations at 200 W. Mercer Street, Suite 500, Seattle, WA 98119 from June 3, 2021 through July 15, 2021. During the inspection, an FDA Investigator determined that your firm is a specification developer for the Steripath Gen 2 Blood Collection System (K192247). Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or function of the body.\n\nThis inspection revealed that the Steripath Gen 2 device is adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. We received your firm’s response dated August 5, 2021 concerning our Investigator’s observations noted on the Form FDA 483, List of Inspectional Observations (FDA 483) that was issued on July 15, 2021. We address the responses below, in relation to each of the noted violations. These violations include, but are not limited to, the following:\n\n1. Failure to establish and maintain adequate procedures for implementing corrective and preventive action, as required by 21 CFR 820.100(a). For example,\n\na. Your firm’s Corrective and Preventive Action SOP, D00011, Rev. D requires your firm to track all meetings pertaining to your CAPA activities in the product investigation section of your Corrective Action Report (CAR). Your firm’s HHE-001 Closure Memo dated January 13, 2021 references meetings held to discuss CAR C00046 on October 8, 2020 and in November 2020. However, these meetings are not described or attached to your CAR C00046.\n\nWe have reviewed your firm’s response dated August 5, 2021 and determined it is inadequate. Your firm’s response acknowledges these meetings were held and states the meeting minutes were never finalized. Your response states your CAPA procedures will be revised to clarify requirements for maintaining meeting minutes. However, your response does not identify that your firm has now finalized and included in your records the subject meeting minutes. Further, your response does not address how your firm evaluated other CARs for similar deficiencies. Lastly, we acknowledge your firm’s commitment to revise your CAPA procedures, however, there is insufficient detail of the proposed changes in your response to allow us to evaluate the adequacy at this time.\n\nb. Your firm’s CAPA C00046 includes an investigation conducted by your supplier of your butterfly retractable needles for premature retraction. This investigation identified three potential causes including 1) (b)(4), 2) application of (b)(4) sterilization, and 3) failure to adhere to shelf-life specifications assigned by the component supplier. Your firm’s CAPA C00046 includes your firm’s evaluation of the primary cause ((b)(4)); however, your firm did not investigate or document your evaluation of the other potential causes.\n\nWe have reviewed your response dated August 5, 2021 and determined it is inadequate. Your response states your firm is revising your CAPA procedures. Your response states your firm held several meetings to discuss these causes; however, it does not identify how you have documented and included your evaluations and investigations into these cases in your CAR C00046. Additionally, your response does not address if your firm has reviewed other CARs for similar deficiencies.\n\nAdditionally, in your response to this letter, please also include description and records of corrective actions or evaluations conducted into the acceptance activities and purchasing controls associated with your butterfly retractable needles.\n\nc. Your firm initiated CAR C00050 on August 20, 2020 after identifying the bill of materials for product parts (b)(4) (various configurations of your Steripath Gen 2 device) contained incorrect instruction for use (IFU) designations. This CAR was closed on April 29, 2021 stating it did not qualify for a CAR because it was identified prior to implementation of the changes. However, your firm identified in October 2020, two additional lots of product ((b)(4) and (b)(4)) were manufactured and subsequently quarantined and reworked. Additionally, our inspection identified that a third lot, 9448037, was manufactured and distributed using the incorrect IFU that your firm did not identify prior to distribution. Your firm’s CAR C00050 did not include adequate investigation to identify and correct all affected products.\n\nWe have reviewed your response dated August 5, 2021 and determined it is inadequate. Your response states your firm is revising your CAPA procedures and has opened CAR C00073 to investigate the CAPA deficiencies. However, there is inadequate description of the proposed changes for us to evaluate the adequacy at this time. Additionally, your response does not address evaluations of other CARs to determine if similar deficiencies exist.\n\nd. Your firm initiated CAR C00055 on January 8, 2021 to investigate lack of implementation of changes to your Steripath Gen 2 labeling after receiving clearance for expanded indications for use. Your CAR C00055 does not include descriptions and records of your investigation into the cause of the nonconformance to ensure systemic corrective actions.\n\nWe have reviewed your response dated August 5, 2021 and determined it is inadequate. We acknowledge you have initiated a removal for this product and your response states your firm is revising your CAPA procedures. However, your response does not address what corrective actions you are taking to specifically address CAR C00055. Additionally, your response does not address reviews of other CARs to determine if similar deficiencies exist.\n\n2. Failure to establish and maintain adequate procedures for verifying the device design to confirm that the design output meets the design input requirements, as required by 21 CFR 820.30(f).\n\nSpecifically, your firm did not conduct verification testing to support the shelf life of your Steripath Gen 2 with the butterfly needle inlet accessory.\n\nWe have reviewed your response dated August 5, 2021 and the “Steripath Gen2 Blood Collection Set (Needle) Configuration Shelf Life Verification Report”, D00309, Rev. A dated June 11, 2021. We cannot determine the adequacy of your response at this time. Your firm’s response states your firm will conduct a retrospective review of all verifications of your Steripath Gen 2 device to assess the impact of using the (b)(4) inlet accessory as the model in the testing. Additionally, your response states your firm is updating your design verification procedures to require evaluation of the inlet and outlet accessories. We request you provide updates to these activities in your response to this letter. Additionally, the provided verification report shows sections 2.4.2, 2.4.3, and 2.4.4 of the test protocol were not complete. In your response to this letter, please include an explanation of why these sections were not completed.\n\n3. Failure to develop, conduct, control, and monitor production processes to ensure that a device conforms to its specifications, as required by 21 CFR 820.70(a).\n\nSpecifically, your firm’s supplier of the butterfly needle inlet of your Steripath Gen 2 device applies a 2-year shelf life to the component. Your firm does not have manufacturing procedures to document and control the remaining shelf life of these components when used in the manufacturing of Steripath Gen 2 finished device which you apply a 2-year shelf life.\n\nWe have reviewed your response dated August 5, 2021 and we cannot determine the adequacy of your response at this time. Your response commits to reviewing all components of your Steripath Gen 2 device and establish procedures to monitor and control remaining shelf life at the time of manufacturing the device. In response to this letter please include updates and supporting records of implementation of these corrective actions as they progress.\n\nYour firm should take prompt action to correct the violations addressed in this letter. Failure to promptly correct these violations may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties. Also, federal agencies may be advised of the issuance of Warning Letters about devices so that they may take this information into account when considering the award of contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been corrected. Also, should FDA determine that your devices do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted. If you believe that your products are not in violation of the Act, please respond to FDA with your reasoning and any supporting information for our consideration.\n\nAdditionally, On July 7, 2021, FDA held a conference call with your firm’s Director of Operations and your firm’s Director of Quality and Regulatory to discuss concerns pertaining to your firm’s corrective actions associated with CAR C00046. During this call it was communicated to you that your firm’s CAR C00046 did not document corrective actions to address previously distributed nonconforming products. Your firm’s Director of Operations stated that a timeline of the corrective actions and the investigation addressing these concerns would be provided to the Agency. We have reviewed your firm’s memorandum dated July 12, 2021, and we do not believe the response adequately addresses those concerns. We request a conference call to further discuss your corrective actions to CAR 00046 with our Office of Medical Device and Radiological Health Operations Division 3. Please contact Compliance Officer Jeff R. Wooley to arrange a time for this call.\n\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to correct the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address all violations included in this Warning Letter.\n\nYour response should be sent to: US Food and Drug Administration, Division 3\u002FWest, Office of Medical Device and Radiological Health Operations at ORADevices3 FirmResponse@fda.hhs.gov. Please identify your response with FEI 3009976527.\n\nIf you have any questions about the contents of this letter, please contact Compliance Officer Jeff R. Wooley at 214-253-5251, or via e-mail at jeffrey.wooley@fda.hhs.gov.\n\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of the violations and take prompt actions to correct the violations and bring the products into compliance.\n\nSincerely,\n\n\u002FS\u002F\n\nShari J. Shambaugh\n\nProgram Division Director\n\nOffice of Medical Devices and Radiological\n\nHealth, Division 3","Magnolia Medical Technologies, Inc.","magnolia-medical-technologies-inc-617922-09172021","2026-08-18T06:42:29.386127+00:00",null,"https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fmagnolia-medical-technologies-inc-617922-09172021","2026-10-26T08:09:18.447816+00:00","Warning Letter","Closed Out","2021-10-19","617922","Medical Devices","2022-05-18","Gregory J. Bullington","2026-08-20T02:31:05.728+00:00","VIA Electronic Mail","2021-09-17",{"id":34,"raw":35,"subject":40,"body_html":41,"body_text":42,"firm_name":43,"letter_id":44,"created_at":45,"fei_number":20,"letter_url":46,"updated_at":47,"action_type":23,"case_status":48,"posted_date":49,"marcs_cms_no":50,"product_type":27,"closeout_date":20,"issuing_office":39,"recipient_name":51,"body_fetched_at":52,"delivery_method":20,"recipient_title":20,"reference_number":20,"action_taken_date":53,"medical_device_id":20,"response_letter_date":20},1564,[36,37,38,39,40,13,13,13],"\u003Ctime datetime=\"2024-03-12T13:20:00Z\">03\u002F12\u002F2024\u003C\u002Ftime>\n","\u003Ctime datetime=\"2024-01-26T05:00:00Z\">01\u002F26\u002F2024\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fnobles-medical-technology-ii-inc-673465-01262024\">Nobles Medical Technology II, Inc.\u003C\u002Fa>","Center for Devices and Radiological Health","Investigational Review Board (IRB)","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Anthony A. Nobles, PhD\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>Chairman and CEO\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Nobles Medical Technology II, Inc.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>17072 Newhope Street\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Fountain Valley\u003C\u002Fspan>, \u003Cspan>CA\u003C\u002Fspan> \u003Cspan>92708\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:anobles@noblesmedical.com\"> anobles@noblesmedical.com\u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n  \u003Cdiv>\n    \u003Cdiv>Secondary Issuing Offices\u003C\u002Fdiv>\n          \u003Cdiv>\n              \u003Cdiv>    \u003Cbr>\n    \n     \n        \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n    \n    \n    \n    \n\u003C\u002Fdiv>\n              \u003C\u002Fdiv>\n      \u003C\u002Fdiv>\n\n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>January 26, 2024\u003C\u002Fp>\n\n\u003Cp>Dear Dr. Nobles:\u003C\u002Fp>\n\n\u003Cp>This Warning Letter is to inform you of objectionable conditions observed during the Food and Drug Administration (FDA) inspection conducted at Nobles Medical Technology II, Inc. from October 16, 2023, to October 20, 2023, by investigators from the FDA’s Office of Bioresearch Monitoring Operations (OBIMO). This inspection was conducted to determine whether activities and procedures as sponsor in the significant risk clinical study “STITCH - Prospective Multi-Center Comparative Parallel Concurrent Study of the NobleStitch EL versus FDA approved Amplatzer Occluder device for closure of Patent Foramen Ovale to prevent recurrent ischemic stroke,” for NobleStitch EL, Investigational Device Exemption (IDE), G180296, complied with applicable federal regulations. The NobleStitch EL is a device as that term is defined in section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), because it is intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or function of the body. This letter also requests prompt corrective action to address the violations cited.\u003C\u002Fp>\n\n\u003Cp>The inspection was conducted under a program designed to ensure that data and information contained in requests for IDEs, Premarket Approval applications, and Premarket Notification submissions are scientifically valid and accurate. Another objective of the program is to ensure that human subjects are protected from undue hazard or risk during the course of scientific investigations.\u003C\u002Fp>\n\n\u003Cp>Our review of the inspection report prepared by the OBIMO revealed serious violations of Title 21, Code of Federal Regulations (CFR) Part 812 - Investigational Device Exemptions, which concerns requirements prescribed under section 520(g) of the Act, 21 U.S.C. § 360j(g). At the close of the inspection, the FDA investigator presented an Inspectional Observations Form FDA-483 for your review and discussed the observations listed on the form with you. To date, your firm has not submitted a written response. The deviations noted on the Form FDA-483 and our subsequent review of the inspection report, are discussed below:\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>1. Failure to ensure proper monitoring and Institutional Review Board (IRB) review and approval [21 CFR 812.40].\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>As a sponsor, you are responsible for providing investigators with the information they need to conduct the investigation properly and for ensuring proper monitoring of the investigation. You are also responsible for ensuring that IRB review and approval are obtained and that the IRB and FDA are promptly informed of significant new information about an investigation. Examples of your failure include, but are not limited to, the following:\u003C\u002Fp>\n\n\u003Cp>a. You failed to provide investigators with necessary information to properly conduct the study, including but not limited to, signed protocols, investigational brochures, and labeling.\u003C\u002Fp>\n\n\u003Cp>b. You failed to ensure proper monitoring of the study. Examples include, but are not limited to:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>Lack of a written monitoring plan and procedures describing how you will monitor the investigation, including how to handle protocol deviations and investigator noncompliance.\u003C\u002Fli>\n\t\u003Cli>Site monitoring reports do not include the documents reviewed, associated findings, and communications with site personnel, including whether your site monitoring included a comparison of source documents with Case Report Forms (CRFs), an essential component of a monitoring plan to ensure data integrity.\u003C\u002Fli>\n\t\u003Cli>Additionally, you failed to secure investigator signatures on CRFs in a timely manner per the Investigator Agreement Section 10.1 (Trial Documentation). For example, Investigator \u003Cstrong>(b)(6)\u003C\u002Fstrong> signed four CRFs eight to twelve months after their monitoring visits, and Investigators \u003Cstrong>(b)(6)\u003C\u002Fstrong> and \u003Cstrong>(b)(6)\u003C\u002Fstrong> did not sign nine and two CRFs, respectively, for monitoring visits to their sites.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>c. You failed to provide documentation of IRB approvals and continuing review for site \u003Cstrong>(b)(4)&nbsp;\u003C\u002Fstrong>and IRB approval for sites \u003Cstrong>(b)(4)\u003C\u002Fstrong> and \u003Cstrong>(b)(4)\u003C\u002Fstrong> for the protocol (versions 5 and 6) and the Amplatzer and NobleStitch CRFs.\u003C\u002Fp>\n\n\u003Cp>Proper monitoring helps ensure that the safety, rights, and well-being of the subjects are protected, and that the data are complete and accurate. Monitoring should be an on-going program performed with the frequency necessary to ensure that the investigation is conducted according to the investigational plan, FDA regulations, and any conditions of approval required by the FDA or the reviewing IRB. Inadequate monitoring can lead to reporting of inaccurate data, missing data, enrollment of subjects that do not meet eligibility criteria, and poor adverse event reporting, among other concerns. In addition, without adequate monitoring there is no assurance that your study conduct is compliant and that any instances of noncompliance are resolved properly.\u003C\u002Fp>\n\n\u003Cp>Furthermore, your failure to ensure that IRB review and approval was obtained at least annually, delays, or prevents the IRB from considering any changes in the research or research-related events and determining whether the human subject protection measures are adequate or need to be changed. Lastly, inadequate oversight of investigator activities can also significantly impact conduct of the study and therefore, the reliability of data generated in the study as well as the safety of study participants.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>2. Failure to select qualified investigators and monitors by training and experience for conducting of a study [812.43(a) and (d)].\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>As a sponsor, you are responsible for selecting qualified investigators and monitors. Examples of your failure include, but are not limited to, the following:\u003C\u002Fp>\n\n\u003Cp>a. You failed to ensure that clinical investigators were qualified by training and experience to conduct the study. During the inspection, you did not provide documentation, such as a curriculum vitae, to show that the clinical investigators were qualified to conduct this study.\u003C\u002Fp>\n\n\u003Cp>b. You did not provide documentation to support that you have the proper training and experience to appropriately monitor the study.\u003C\u002Fp>\n\n\u003Cp>The selection of qualified investigators and monitors is essential to ensure subjects’ safety and that your study is conducted properly in accordance with Good Clinical Practices.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>3. Failure to obtain a signed agreement from each participating investigator that includes a statement of the investigator’s commitment to conduct an investigation in accordance with the agreement, investigational plan, applicable FDA regulations, conditions of approval imposed by the reviewing IRB and conditions of approval imposed by the FDA [21 CFR 812.43(c)(4)(i)].\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>As a sponsor, you are responsible for obtaining from each participating investigator a signed agreement that includes a statement of the investigator's commitment to conduct the investigation in accordance with the agreement, the investigational plan, and other applicable FDA regulations, and conditions of approval imposed by the reviewing IRB or FDA.\u003C\u002Fp>\n\n\u003Cp>While signed agreements were obtained of participating clinical investigators, they lack a statement of the investigator’s commitment to supervise all testing of the device involving human subjects. Obtaining signed agreements is important for ensuring that investigators participating in the clinical study are accountable for the conduct of the study.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>4. Failure to obtain from each participating investigator a signed agreement that includes sufficient accurate financial disclosure information to allow the sponsor to submit a complete and accurate certification or disclosure statement [21 CFR 812.43(c)(5)].\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>As a sponsor you are responsible for obtaining from each participating investigator a signed agreement that includes sufficient accurate financial disclosure information to allow the sponsor to submit a complete and accurate certification or disclosure statement.\u003C\u002Fp>\n\n\u003Cp>You failed to obtain a signed agreement that includes sufficient accurate financial disclosure information from each participating investigator. Specifically, you did not provide financial disclosure records for any site during your inspection. Obtaining accurate financial disclosure information is important for ensuring that there is no financial bias by any of your clinical investigators that may impact clinical study data.\u003C\u002Fp>\n\n\u003Cp>In addition to the above objectionable conditions found during the inspection of your U.S. sites, there were similar observations noted for your site in Italy, which is your largest enrolling site. These observations include inadequate study protocols, lack of investigator agreements, inadequate informed consent, inadequate adverse event reporting, inadequate investigational device tracking, and inadequate monitoring.\u003C\u002Fp>\n\n\u003Cp>All of these failures raise significant concerns regarding whether your study will yield credible and accurate data and whether the rights, safety and well-being of subjects are adequately protected. The consequences of these failures are evidenced by the decision to suspend your study and the numerous cycles of review of your annual reports for the IDE, where discrepant and unclear information has been provided regarding fundamental aspects of your study (e.g., reviewing IRBs and sites and numbers of enrolled\u002Fimplanted subjects) as well as safety and effectiveness information.\u003C\u002Fp>\n\n\u003Cp>The violations described above are not intended to be an all-inclusive list of problems that may exist with your clinical study. It is your responsibility as a study sponsor to ensure compliance with the Act and applicable regulations.\u003C\u002Fp>\n\n\u003Cp>Within 15 working days of receiving this letter, please provide documentation of the corrective and preventative actions that you have taken or will take to correct these violations and to prevent the recurrence of similar violations in current or future studies for which you are the study sponsor. Any submitted corrective action plan must include projected completion dates for each action to be accomplished as well as a plan for monitoring the effectiveness of your corrective actions. Failure to respond to this letter and take appropriate corrective action could result in the FDA taking regulatory action without further notice to you.\u003C\u002Fp>\n\n\u003Cp>Your response should reference “CTS# G180296\u002FE003” and be sent via email to: Albert.Rodriguez@fda.hhs.gov.\u003C\u002Fp>\n\n\u003Cp>A copy of this letter has been sent to FDA’s OBIMO West via email ORABIMOW.Correspondence@fda.hhs.gov. Please send a copy of your response to that office.\u003C\u002Fp>\n\n\u003Cp>The Division of Clinical Policy and Quality has developed introductory training modules in FDA-regulated device clinical research practices, which are available on the FDA website. The modules are for persons involved in FDA-regulated device clinical research activities. These modules are located at the following website address: http:\u002F\u002Fwww.fda.gov\u002FTraining\u002FCDRHLearn.\u003C\u002Fp>\n\n\u003Cp>If you have any questions, you may contact Alejandra Cambonchi by phone at (301) 796-0552 or email at Alejandra.Cambonchi@fda.hhs.gov.\u003C\u002Fp>\n\n\u003Cp>Sincerely yours,\u003Cbr>\n\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>Soma Kalb, PhD\u003Cbr>\nDirector\u003Cbr>\nDivision of Clinical Policy and Quality\u003Cbr>\nOffice of Clinical Evidence &amp; Analysis\u003Cbr>\nOffice of Product Evaluation and Quality\u003Cbr>\nCenter for Devices and Radiological Health\u003C\u002Fp>\n\n\n\n\n\n\n\n              \n                                            \n              \n            ","Product:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nAnthony A. Nobles, PhD\n\nRecipient Title\n\nChairman and CEO\n\nNobles Medical Technology II, Inc.\n\n17072 Newhope Street\n\nFountain Valley, CA 92708\n\nUnited States\n\nanobles@noblesmedical.com\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nSecondary Issuing Offices\n\nUnited States\n\nWARNING LETTER\n\nJanuary 26, 2024\n\nDear Dr. Nobles:\n\nThis Warning Letter is to inform you of objectionable conditions observed during the Food and Drug Administration (FDA) inspection conducted at Nobles Medical Technology II, Inc. from October 16, 2023, to October 20, 2023, by investigators from the FDA’s Office of Bioresearch Monitoring Operations (OBIMO). This inspection was conducted to determine whether activities and procedures as sponsor in the significant risk clinical study “STITCH - Prospective Multi-Center Comparative Parallel Concurrent Study of the NobleStitch EL versus FDA approved Amplatzer Occluder device for closure of Patent Foramen Ovale to prevent recurrent ischemic stroke,” for NobleStitch EL, Investigational Device Exemption (IDE), G180296, complied with applicable federal regulations. The NobleStitch EL is a device as that term is defined in section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), because it is intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or function of the body. This letter also requests prompt corrective action to address the violations cited.\n\nThe inspection was conducted under a program designed to ensure that data and information contained in requests for IDEs, Premarket Approval applications, and Premarket Notification submissions are scientifically valid and accurate. Another objective of the program is to ensure that human subjects are protected from undue hazard or risk during the course of scientific investigations.\n\nOur review of the inspection report prepared by the OBIMO revealed serious violations of Title 21, Code of Federal Regulations (CFR) Part 812 - Investigational Device Exemptions, which concerns requirements prescribed under section 520(g) of the Act, 21 U.S.C. § 360j(g). At the close of the inspection, the FDA investigator presented an Inspectional Observations Form FDA-483 for your review and discussed the observations listed on the form with you. To date, your firm has not submitted a written response. The deviations noted on the Form FDA-483 and our subsequent review of the inspection report, are discussed below:\n\n1. Failure to ensure proper monitoring and Institutional Review Board (IRB) review and approval [21 CFR 812.40].\n\nAs a sponsor, you are responsible for providing investigators with the information they need to conduct the investigation properly and for ensuring proper monitoring of the investigation. You are also responsible for ensuring that IRB review and approval are obtained and that the IRB and FDA are promptly informed of significant new information about an investigation. Examples of your failure include, but are not limited to, the following:\n\na. You failed to provide investigators with necessary information to properly conduct the study, including but not limited to, signed protocols, investigational brochures, and labeling.\n\nb. You failed to ensure proper monitoring of the study. Examples include, but are not limited to:\n\nLack of a written monitoring plan and procedures describing how you will monitor the investigation, including how to handle protocol deviations and investigator noncompliance.\n\nSite monitoring reports do not include the documents reviewed, associated findings, and communications with site personnel, including whether your site monitoring included a comparison of source documents with Case Report Forms (CRFs), an essential component of a monitoring plan to ensure data integrity.\n\nAdditionally, you failed to secure investigator signatures on CRFs in a timely manner per the Investigator Agreement Section 10.1 (Trial Documentation). For example, Investigator (b)(6) signed four CRFs eight to twelve months after their monitoring visits, and Investigators (b)(6) and (b)(6) did not sign nine and two CRFs, respectively, for monitoring visits to their sites.\n\nc. You failed to provide documentation of IRB approvals and continuing review for site (b)(4) and IRB approval for sites (b)(4) and (b)(4) for the protocol (versions 5 and 6) and the Amplatzer and NobleStitch CRFs.\n\nProper monitoring helps ensure that the safety, rights, and well-being of the subjects are protected, and that the data are complete and accurate. Monitoring should be an on-going program performed with the frequency necessary to ensure that the investigation is conducted according to the investigational plan, FDA regulations, and any conditions of approval required by the FDA or the reviewing IRB. Inadequate monitoring can lead to reporting of inaccurate data, missing data, enrollment of subjects that do not meet eligibility criteria, and poor adverse event reporting, among other concerns. In addition, without adequate monitoring there is no assurance that your study conduct is compliant and that any instances of noncompliance are resolved properly.\n\nFurthermore, your failure to ensure that IRB review and approval was obtained at least annually, delays, or prevents the IRB from considering any changes in the research or research-related events and determining whether the human subject protection measures are adequate or need to be changed. Lastly, inadequate oversight of investigator activities can also significantly impact conduct of the study and therefore, the reliability of data generated in the study as well as the safety of study participants.\n\n2. Failure to select qualified investigators and monitors by training and experience for conducting of a study [812.43(a) and (d)].\n\nAs a sponsor, you are responsible for selecting qualified investigators and monitors. Examples of your failure include, but are not limited to, the following:\n\na. You failed to ensure that clinical investigators were qualified by training and experience to conduct the study. During the inspection, you did not provide documentation, such as a curriculum vitae, to show that the clinical investigators were qualified to conduct this study.\n\nb. You did not provide documentation to support that you have the proper training and experience to appropriately monitor the study.\n\nThe selection of qualified investigators and monitors is essential to ensure subjects’ safety and that your study is conducted properly in accordance with Good Clinical Practices.\n\n3. Failure to obtain a signed agreement from each participating investigator that includes a statement of the investigator’s commitment to conduct an investigation in accordance with the agreement, investigational plan, applicable FDA regulations, conditions of approval imposed by the reviewing IRB and conditions of approval imposed by the FDA [21 CFR 812.43(c)(4)(i)].\n\nAs a sponsor, you are responsible for obtaining from each participating investigator a signed agreement that includes a statement of the investigator's commitment to conduct the investigation in accordance with the agreement, the investigational plan, and other applicable FDA regulations, and conditions of approval imposed by the reviewing IRB or FDA.\n\nWhile signed agreements were obtained of participating clinical investigators, they lack a statement of the investigator’s commitment to supervise all testing of the device involving human subjects. Obtaining signed agreements is important for ensuring that investigators participating in the clinical study are accountable for the conduct of the study.\n\n4. Failure to obtain from each participating investigator a signed agreement that includes sufficient accurate financial disclosure information to allow the sponsor to submit a complete and accurate certification or disclosure statement [21 CFR 812.43(c)(5)].\n\nAs a sponsor you are responsible for obtaining from each participating investigator a signed agreement that includes sufficient accurate financial disclosure information to allow the sponsor to submit a complete and accurate certification or disclosure statement.\n\nYou failed to obtain a signed agreement that includes sufficient accurate financial disclosure information from each participating investigator. Specifically, you did not provide financial disclosure records for any site during your inspection. Obtaining accurate financial disclosure information is important for ensuring that there is no financial bias by any of your clinical investigators that may impact clinical study data.\n\nIn addition to the above objectionable conditions found during the inspection of your U.S. sites, there were similar observations noted for your site in Italy, which is your largest enrolling site. These observations include inadequate study protocols, lack of investigator agreements, inadequate informed consent, inadequate adverse event reporting, inadequate investigational device tracking, and inadequate monitoring.\n\nAll of these failures raise significant concerns regarding whether your study will yield credible and accurate data and whether the rights, safety and well-being of subjects are adequately protected. The consequences of these failures are evidenced by the decision to suspend your study and the numerous cycles of review of your annual reports for the IDE, where discrepant and unclear information has been provided regarding fundamental aspects of your study (e.g., reviewing IRBs and sites and numbers of enrolled\u002Fimplanted subjects) as well as safety and effectiveness information.\n\nThe violations described above are not intended to be an all-inclusive list of problems that may exist with your clinical study. It is your responsibility as a study sponsor to ensure compliance with the Act and applicable regulations.\n\nWithin 15 working days of receiving this letter, please provide documentation of the corrective and preventative actions that you have taken or will take to correct these violations and to prevent the recurrence of similar violations in current or future studies for which you are the study sponsor. Any submitted corrective action plan must include projected completion dates for each action to be accomplished as well as a plan for monitoring the effectiveness of your corrective actions. Failure to respond to this letter and take appropriate corrective action could result in the FDA taking regulatory action without further notice to you.\n\nYour response should reference “CTS# G180296\u002FE003” and be sent via email to: Albert.Rodriguez@fda.hhs.gov.\n\nA copy of this letter has been sent to FDA’s OBIMO West via email ORABIMOW.Correspondence@fda.hhs.gov. Please send a copy of your response to that office.\n\nThe Division of Clinical Policy and Quality has developed introductory training modules in FDA-regulated device clinical research practices, which are available on the FDA website. The modules are for persons involved in FDA-regulated device clinical research activities. These modules are located at the following website address: http:\u002F\u002Fwww.fda.gov\u002FTraining\u002FCDRHLearn.\n\nIf you have any questions, you may contact Alejandra Cambonchi by phone at (301) 796-0552 or email at Alejandra.Cambonchi@fda.hhs.gov.\n\nSincerely yours,\n\n\u002FS\u002F\n\nSoma Kalb, PhD\n\nDirector\n\nDivision of Clinical Policy and Quality\n\nOffice of Clinical Evidence & Analysis\n\nOffice of Product Evaluation and Quality\n\nCenter for Devices and Radiological Health","Nobles Medical Technology II, Inc.","nobles-medical-technology-ii-inc-673465-01262024","2026-08-18T06:42:28.994808+00:00","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fnobles-medical-technology-ii-inc-673465-01262024","2026-10-26T08:09:34.338448+00:00","Issued","2024-03-12","673465","Anthony A. Nobles, PhD","2026-08-20T00:14:37.004+00:00","2024-01-26",{"id":55,"raw":56,"subject":12,"body_html":60,"body_text":61,"firm_name":62,"letter_id":63,"created_at":64,"fei_number":20,"letter_url":65,"updated_at":66,"action_type":23,"case_status":48,"posted_date":67,"marcs_cms_no":68,"product_type":27,"closeout_date":20,"issuing_office":39,"recipient_name":69,"body_fetched_at":70,"delivery_method":31,"recipient_title":20,"reference_number":20,"action_taken_date":71,"medical_device_id":20,"response_letter_date":20},544,[57,58,59,39,12,13,13,13],"\u003Ctime datetime=\"2025-10-07T04:00:00Z\">10\u002F07\u002F2025\u003C\u002Ftime>\n","\u003Ctime datetime=\"2025-09-26T04:00:00Z\">09\u002F26\u002F2025\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Ftechnological-medical-advancements-llc-712715-09262025\">Technological Medical Advancements LLC\u003C\u002Fa>","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>VIA Electronic Mail\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Dr. Bruce R. Coren, DVM, MS\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>Chief Executive Officer\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Technological Medical Advancements LLC\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>1601 Belvedere Rd Ste E-180\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>West Palm Beach\u003C\u002Fspan>, \u003Cspan>FL\u003C\u002Fspan> \u003Cspan>33406-1541\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:bcoren@diowavelaser.com\"> bcoren@diowavelaser.com \u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>CMS # 712715\u003C\u002Fp>\u003Cp>September 26, 2025\u003C\u002Fp>\u003Cp>Dear Dr. Coren:&nbsp;\u003C\u002Fp>\u003Cp>During an inspection of your firm located in West Palm Beach, Florida from April 9, 2025, through April 21, 2025, investigators from the United States Food and Drug Administration (FDA) determined that your firm manufactures the Diowave 250 WLS and Diowave 100 WLS laser system. Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.&nbsp;\u003C\u002Fp>\u003Cp>\u003Cstrong>\u003Cu>Unapproved Device Violations\u003C\u002Fu>\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>FDA has reviewed the information collected during the April 2025 inspection and information on your firm’s website at www.diowavelaser.com (last accessed on July 1, 2025). FDA has reviewed the Physician Brochure (TMA, Physician Brochure, February 2024), AI Instructions for Use (TMA, Diowave 100 WLS &amp; Diowave 250 WLS, IMPOS-AI User Instructions, Undated, 1 page.pdf ), Diowave Life Without Pain Brochure (Diowave Laser Treatment Center, Imagine Life Without Pain Brochure), and an Operating Manual (TWA, Diowave Stealth Micro-Pulse Laser System Operating Manual Version 2024-5), and has determined that the Diowave 100 WLS and Diowave 250 WLS devices are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B) because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption (IDE) under section 520(g) of the Act, 21 U.S.C. § 360j(g) for the device as described and marketed. The Diowave 100 WLS and Diowave 250 WLS devices are also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the devices into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C. §360(k). Specifically, the Diowave 100 WLS and the Diowave 250 WLS are in violation of the Act for the reasons discussed below.\u003C\u002Fp>\u003Cp>\u003Cstrong>Technological Characteristics:\u003C\u002Fstrong> Devices classified under 21 CFR 890.5500 Infrared Lamp are devices intended for medical purposes that emits energy at infrared frequencies to provide topical heating and are exempt from premarket notification requirements unless they exceed the limitations on exemption at 21 CFR 890.9. However, there is evidence that the Diowave 250 WLS and Diowave 100 WLS operate using a different fundamental scientific technology than that generic type of device. Specifically, your firm’s Care Provider Brochure states that “\u003Cem>all heat during a stealth treatment is inhibited, allowing for deep penetration as there is no heat during treatment\u003C\u002Fem>.” Further, the Diowave 100 WLS and Diowave 250 WLS appear to utilize stealth micro-pulse laser technology, which does not provide topical heating. For example, your distribution includes materials with claims such as:\u003C\u002Fp>\u003Cp>\u003Cem>o\u003C\u002Fem>&nbsp;\u003Cem> “Diowave is pleased to reveal the Stealth Micro-Pulsed Laser System™. SMPLTallows you to hold a hand piece static over a focal pathology without heating tissue..”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“Our Stealth Micro-Pulse Technology allows care providers to treat various pathologies by Micro-Pulsing at appropriate power levels without introducing heat.”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“The Doctor can remove all heat from the laser beam allowing him to hold thelaser directly over the injury for an indefinite amount of time.”\u003C\u002Fem>\u003C\u002Fp>\u003Cp>As shown by the evidence, the Diowave 100 WLS and Diowave 250 WLS devices do not provide topical heating. Instead, they use a different fundamental scientific technology. Therefore, the premarket notification requirements apply.\u003C\u002Fp>\u003Cp>\u003Cstrong>Intended Use:\u003C\u002Fstrong>\u003Cbr>Generic devices classified under 21 CFR 890.5500 emit energy at infrared frequencies (approximately 700 to 50,000 nanometers) to provide topical heating and are intended for medical purposes including, but not limited to, temporary increase in local blood circulation and temporary relief of: muscle spasms, minor joint pain and stiffness, minor muscle pain and stiffness, and minor arthritis pain. Devices classified under 21 CFR 890.5500 are exempt from premarket notification unless they exceed the limitations on exemption at 21 CFR 890.9(a). However, there is evidence that the Diowave 250 WLS and Diowave 100 WLS are intended for uses that are different from the intended use of the type of devices classified under 21 CFR 890.5500 Infrared Lamp. For example, your distribution of the Diowave 100 WLS and Diowave 250 WLS devices includes the following claims:\u003C\u002Fp>\u003Cp>\u003Cem>o &nbsp;“a painless, non-surgical, and side-effective way to treat conditions previously refractive to traditional medical care”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“treatment of various pathologies, including those refractive to traditional therapy”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“Because laser therapy is the only treatment in medicine that actually heals living tissue, most conditions respond favorably to repeated laser therapy treatments. It has been proven to deliver results when all other forms of insurance-based medicine have failed.”&nbsp;&nbsp;\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“This technology has shown great promise in healing conditions which are refractive or non-responsive to all other forms of treatment and surgery, including HPLT [High Power Laser Therapy]”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“peripheral neuropathy” case study: “An 80-year-old male with advance circulatory disease in his lower extremities presents with numbness in his feet and toes. He cannot drive because he cannot feel his feet…by the end of 12 visits, his proprioception to the bottom of his feet returned”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“Summation of Various Main Treatment Indications for Diowave:…abdominalpain, pelvic pain, wound care”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“Difficult to treat pathologies that are adequately treated by Diowave: post-surgical pain, implantable device pocket pain, surgically fused areas in which insurance will not cover further treatment, areas that do not respond well to nerve blocks or joint injections, “disc pathology, wounds refractory to conventional medical treatment, after regenerative medicine treatment: using laser to amplify effects of regenerative medicine treatments by kickstarting the process.”\u003C\u002Fem>\u003Cbr>\u003Cem>o &nbsp;“results come from the laser’s ability to stimulate tissue growth and repair…results in accelerated wound healing with a dramatic decrease in…inflammation, and scar tissue formation”\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Further, we note that your firm has an existing clearance (K121363) under 21 CFR 890.5500 with the following indications:\u003C\u002Fp>\u003Cp>\u003Cem>“The Diowave Laser System is intended to emit energy in the infrared spectrum to provide topical heating for the purpose of elevating tissue temperature for temporary relief of minor muscle and joint pain, muscle spasm, pain and stiffness associated with minor arthritis, promoting relaxation of muscle tissue, and to temporarily increase local blood circulation.”\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Your firm’s promotion of the device provides evidence that the device is intended for conditions beyond the indications for which it was cleared. Examples of these claims are included above. This constitutes a major change or modification in the intended use. Thus, a new premarket notification is required. Additionally, your firm’s promotion of the device provides evidence that your firm made a technological change to the device that could significantly affect the safety or effectiveness of the device. Examples of these claims are included above. This change is a significant change or modification for which a new premarket notification is required.\u003C\u002Fp>\u003Cp>For a device requiring premarket approval, the notification required by section 510(k) of the Act, 21 U.S.C. § 360(k), is deemed satisfied when a PMA is pending before the agency. 21 CFR 807.81(b). The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fd efault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\u003C\u002Fp>\u003Cp>Our office requests that Technological Medical Advancements LLC cease any activities that result in the misbranding or adulteration of the Diowave 100 WLS and Diowave 250 WLS devices, such as the commercial distribution of the device, for the uses discussed above.\u003C\u002Fp>\u003Cp>\u003Cstrong>\u003Cu>Quality System Regulation Violations\u003C\u002Fu>\u003C\u002Fstrong>\u003Cbr>This inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, \u003Cu>Code of Federal Regulations\u003C\u002Fu> (CFR), Part 820. Your firm’s response dated May 23, 2025, to the Form FDA 483 (FDA 483) was not received within fifteen business days of issuance of the FDA 483 however we performed a review of your response. These violations include, but are not limited to, the following:\u003C\u002Fp>\u003Cp>1. Failure to adequately establish procedures to ensure that all purchased or otherwise received products and services conform to specified requirements, as required by 21 CFR 820.50.Specifically,\u003C\u002Fp>\u003Cp>A. Your firm has failed to perform supplier evaluations as required by Purchasing Control Standard Operating Procedure, TMAQSP007, Revision 2.0. These include evaluations for critical suppliers, comprised of your contract manufacturer and designer \u003Cstrong>(b)(4)\u003C\u002Fstrong> and your contract service firm \u003Cstrong>(b)(4)\u003C\u002Fstrong>, as required by Section 3 of your procedure. Additionally, no \u003Cstrong>(b)(4)\u003C\u002Fstrong> evaluations were conducted for any suppliers despite procedural requirements, and no justification was provided for not performing them.\u003C\u002Fp>\u003Cp>B. Your firm failed to maintain supplier agreements as required by your Supplier Evaluation and Monitoring Standard Operating Procedure, TMA_QSP_023. For example, section 6.1.2 of your procedure states that “a Quality Agreement\u002FCritical Supplier Quality Agreement is drafted and signed between both parties.” However, your firm has unsigned agreements with your contract manufacturer, including both the Critical Supplier Quality Agreement and Software Agreement. During the inspection, your contract manufacturer was unable to provide required design control records for review.\u003C\u002Fp>\u003Cp>C. The inspection noted that your firm failed to have adequate purchasing controls and supplier oversight of your firm’s contract manufacturer, \u003Cstrong>(b)(4)\u003C\u002Fstrong>, responsible for design controls. Your firm's inability to retrieve basic design control records from your contract designer\u002Fmanufacturer during the FDA inspection, despite claims that these documents existed, demonstrates inadequate oversight of critical supplier activities. For example:\u003C\u002Fp>\u003Cp>i. &nbsp;Your firm could not provide the Design History File (DHF) records for the Diowave 250 WLS and Diowave 100 WLS medical devices. The inspection found no evidence of essential design control records including design planning, design inputs, design outputs, design reviews, design verification, design validation, design change or design transfer, representing a comprehensive failure to maintain adequate design control records as required by FDA regulations. As such, FDA is concerned that the medical devices will not consistently meet intended use and safety requirements, that design changes are not properly controlled and documented, and that the finished device design may not meet user needs and intended use.\u003C\u002Fp>\u003Cp>ii. &nbsp;The design risk management files for the Diowave 250 WLS and Diowave 100WLS laser device were not available for review. No records were available toreview by FDA investigators for design risk analysis despite your proceduralrequirements in section 3.4 of Risk Management Standard Operating Procedure,TMAQSP043, Revision 1.0, to incorporate risk analysis into your firm’s DesignReview. No risk assessment was available for review for the power increase from \u003Cstrong>(b)(4)\u003C\u002Fstrong>W to \u003Cstrong>(b)(4)\u003C\u002Fstrong>W. No evaluation on the potential need to submit a new premarket application was performed.\u003C\u002Fp>\u003Cp>iii. &nbsp;Your firm’s Supplier Evaluation and Monitoring Standard OperatingTMA_QSP_023, Revision 1 states in section 6.2 that “\u003Cstrong>(b)(4)\u003C\u002Fstrong>. ”There have been significant modifications to your devices without notification from critical supplier or oversight and approval of changes by your firm. This includes the review of design control records such as design verification and design validation to include risk analysis. For example, design control records for changes to software (\u003Cstrong>(b)(4)\u003C\u002Fstrong> for 250 WLS, \u003Cstrong>(b)(4)\u003C\u002Fstrong> for 100 WLS), as well as an identified power increase for the Diowave laser systems from \u003Cstrong>(b)(4)\u003C\u002Fstrong>W to \u003Cstrong>(b)(4)\u003C\u002Fstrong>W were not available for review during the inspection.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Your firm’s response does not address deficiencies with the purchasing controls and oversight of the design control activities delegated to your contract manufacturer. In addition, while your firm provided some design control records from your contract manufacturer, \u003Cstrong>(b)(4)\u003C\u002Fstrong>, you did not provide records that include the changes to the Diowave Laser System 100 WLS\u002F250 WLS or design inputs, and therefore, we are unable determine if the device design outputs meet the design inputs. The design output records provided are missing complete device specifications, manufacturing specifications, software design specifications and labeling specifications. The design review documents are missing design reviews for all phases of the device design plan. There is no design change control for design changes previously described. The design transfer document does not include all required design transfer activities and any manufacturing process validations performed. Following our review of your response, you have not addressed the deficiencies in your firm’s design control subsystem and the requirement for a complete design history file (DHF) for your medical devices.\u003C\u002Fp>\u003Cp>2. Failure to establish and maintain procedures for receiving, reviewing, and evaluating complaints by a formally designated unit and to maintain complaint files, as required by 21CFR 820.198(a). For example:\u003C\u002Fp>\u003Cp>A. FDA investigators reviewed ten complaints from 2025 and identified comprehensive procedural failures for the receipt, review, and evaluation of complaints. Your firm failed to implement Customer Complaints procedure, TMAQSP003, Revision 3.0,and perform required procedural activities for all complaints reviewed, including complaint investigations, failure mode analysis, Management Representative approval, and completing all fields in the complaint forms.\u003C\u002Fp>\u003Cp>B. Your firm failed to handle all complaints in a timely manner. For example, your firm has not reviewed or evaluated \u003Cstrong>(b)(4)\u003C\u002Fstrong> servicing records from the third-party supplier as specified by your procedure TMA_QSP_009 Servicing, Rev 2.0, so that the Management Representative can determine if they meet the definition of a complaint so that they can be investigated as necessary.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address this inspectional observation, and therefore is missing a corrective action plan, time frames for implementation, and documentation of activities performed to correct the underlying deficiency.\u003C\u002Fp>\u003Cp>3. Your firm has failed to adequately establish and maintain procedures for corrective and preventive action, as required by 21 CFR 820.100(a). Specifically, your firm has not adequately established CAPA Procedure, TMAQSP012, Revision 1.0. For example:\u003C\u002Fp>\u003Cp>A. Your procedure lacks requirements for analyzing processes, work operations, concessions, quality audit reports, quality records, service records, complaints, returned product, and other sources of quality data to identify existing and potential causes of nonconforming product, or other quality problems.\u003C\u002Fp>\u003Cp>B. Your firm has not implemented Section 3.2 of the CAPA procedure to identify actions needed to correct and prevent the recurrence of any non-conformity. For example, your firm has not opened any corrective and preventive actions, as required by your procedure, after it has been cited with the following:\u003C\u002Fp>\u003Cp>&nbsp; i. Fourteen inspectional observations from an FDA inspection conducted from August 4, 2021, to September 9, 2021;\u003Cbr>&nbsp; ii. Thirteen observations, along with seven verbal observations, from an FDA inspection conducted from February 19, 2020 to February 24, 2020;\u003Cbr>&nbsp; iii. Twelve violations cited in a letter sent to your firm on June 8, 2020, by FDA.\u003C\u002Fp>\u003Cp>This FDA inspection, along with previous FDA inspections, have identified repeat systemic deficiencies of your firm’s inability to identify actions to correct and prevent the recurrence of quality problems.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\u003C\u002Fp>\u003Cp>4. Your firm has failed to establish and maintain adequate procedures for quality audits, as required by 21 CFR 820.22. Specifically, your firm did not conduct quality audits in 2023and 2024 as required by your Internal Audit Standard Operating Procedure, TMAQSP004,Revision 1.0. As of the date of the inspection, no quality audit has been conducted in 2025.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\u003C\u002Fp>\u003Cp>5. Your firm has failed to establish procedures to control product that does not conform to specified requirements, as required by 21 CFR 820.90(a). Specifically, your firm does not have a procedure for addressing nonconforming products or materials. When the FDA investigator asked about procedures for nonconforming products or materials, you stated that such procedures did not exist. Without procedures to define nonconformance criteria and disposition processes, your firm cannot effectively identify or manage quality issues that may arise during manufacturing, incoming inspection, acceptance testing activities or as part of post-market surveillance activities.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\u003C\u002Fp>\u003Cp>6. Your firm has failed to adequately establish and maintain procedures for management review, as required by 21 CFR 820.20(c). Specifically, your firm did not follow Management Review Standard Operating Procedure, TMAQSP010, Revision 1.0, which requires periodic management review at least \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your firm did not conduct a management review in 2024, thereby failing to determine the effectiveness of your quality system. This inspection identified several inspectional observations and deficiencies that have gone uncorrected from the two previous FDA inspections or approximately 5 years.\u003C\u002Fp>\u003Cp>We reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\u003C\u002Fp>\u003Cp>\u003Cstrong>\u003Cu>Unique Device Identifier Regulation (UDI) Violations\u003C\u002Fu>\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>The inspection revealed that your devices are misbranded within the meaning of section 502(c) of the Act, 21 U.S.C. § 352(c), because a word, statement, or other information required by or under authority of section 519 of the Act, 21 U.S.C. § 360i, to appear on the label or labeling of the devices was not prominently placed thereon with such conspicuousness (as compared with other words, statements, designs, or devices, in the labeling) and in such terms as to render it likely to be read and understood by the ordinary individual under customary conditions of purchase and use. In particular, 21 CFR 801.20(a) – which was promulgated under authority of section 519 of the Act, among other provisions – requires, with exceptions not relevant here, that the label and device package of every medical device bear a unique device identifier (UDI) that meets the requirements of 21 CFR Part 801, subpart B, and 21 CFR Part 830. The labels of the Diowave Pure Pulse Laser System devices do not bear such a UDI.\u003C\u002Fp>\u003Cp>Specifically, the labels for Diowave Pure Pulse Laser System devices do not include a device identifier within the meaning of 21 CFR 801.3 or 830.3, and there is no UDI presented in easily readable plain-text on the label of the device (see 21 CFR 801.40(a)(1)), and there is no UDI presented in machine-readable form that uses automatic identification and data capture (AIDC) technology on the label of the device (see 21 CFR 801.40(a)(2)).\u003C\u002Fp>\u003Cp>A follow-up inspection will be required to assure that corrections and\u002For corrective actions are adequate. Your firm should take prompt action to address any violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\u003C\u002Fp>\u003Cp>Other federal agencies may take your compliance with the FD&amp;C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\u003C\u002Fp>\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\u003Cp>Your firm’s response should be sent via email to Melissa Michurski, Assistant Director at CDRHEnforcement@fda.hhs.gov. Please include in the subject line, “CMS Case 712715” when replying. If you have any questions about the contents of this letter, please contact: Rafael Padilla at Rafael.Padilla@FDA.hhs.gov.\u003C\u002Fp>\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\u003C\u002Fp>\u003Cp>Sincerely,\u003Cbr>\u002FS\u002F\u003C\u002Fp>\u003Cp>Barbara C. Marsden\u003Cbr>Acting Director\u003Cbr>Office of Regulatory Programs\u003Cbr>Office of Product Evaluation and Quality\u003Cbr>Center for Devices and Radiological Health\u003C\u002Fp>\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVIA Electronic Mail\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nDr. Bruce R. Coren, DVM, MS\n\nRecipient Title\n\nChief Executive Officer\n\nTechnological Medical Advancements LLC\n\n1601 Belvedere Rd Ste E-180\n\nWest Palm Beach, FL 33406-1541\n\nUnited States\n\nbcoren@diowavelaser.com\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nWARNING LETTER\nCMS # 712715\nSeptember 26, 2025\nDear Dr. Coren:\nDuring an inspection of your firm located in West Palm Beach, Florida from April 9, 2025, through April 21, 2025, investigators from the United States Food and Drug Administration (FDA) determined that your firm manufactures the Diowave 250 WLS and Diowave 100 WLS laser system. Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\nUnapproved Device Violations\nFDA has reviewed the information collected during the April 2025 inspection and information on your firm’s website at www.diowavelaser.com (last accessed on July 1, 2025). FDA has reviewed the Physician Brochure (TMA, Physician Brochure, February 2024), AI Instructions for Use (TMA, Diowave 100 WLS & Diowave 250 WLS, IMPOS-AI User Instructions, Undated, 1 page.pdf ), Diowave Life Without Pain Brochure (Diowave Laser Treatment Center, Imagine Life Without Pain Brochure), and an Operating Manual (TWA, Diowave Stealth Micro-Pulse Laser System Operating Manual Version 2024-5), and has determined that the Diowave 100 WLS and Diowave 250 WLS devices are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B) because your firm does not have an approved application for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or an approved application for an investigational device exemption (IDE) under section 520(g) of the Act, 21 U.S.C. § 360j(g) for the device as described and marketed. The Diowave 100 WLS and Diowave 250 WLS devices are also misbranded under section 502(o) the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the devices into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C. §360(k). Specifically, the Diowave 100 WLS and the Diowave 250 WLS are in violation of the Act for the reasons discussed below.\nTechnological Characteristics: Devices classified under 21 CFR 890.5500 Infrared Lamp are devices intended for medical purposes that emits energy at infrared frequencies to provide topical heating and are exempt from premarket notification requirements unless they exceed the limitations on exemption at 21 CFR 890.9. However, there is evidence that the Diowave 250 WLS and Diowave 100 WLS operate using a different fundamental scientific technology than that generic type of device. Specifically, your firm’s Care Provider Brochure states that “all heat during a stealth treatment is inhibited, allowing for deep penetration as there is no heat during treatment.” Further, the Diowave 100 WLS and Diowave 250 WLS appear to utilize stealth micro-pulse laser technology, which does not provide topical heating. For example, your distribution includes materials with claims such as:\no “Diowave is pleased to reveal the Stealth Micro-Pulsed Laser System™. SMPLTallows you to hold a hand piece static over a focal pathology without heating tissue..”\no “Our Stealth Micro-Pulse Technology allows care providers to treat various pathologies by Micro-Pulsing at appropriate power levels without introducing heat.”\no “The Doctor can remove all heat from the laser beam allowing him to hold thelaser directly over the injury for an indefinite amount of time.”\nAs shown by the evidence, the Diowave 100 WLS and Diowave 250 WLS devices do not provide topical heating. Instead, they use a different fundamental scientific technology. Therefore, the premarket notification requirements apply.\nIntended Use:\nGeneric devices classified under 21 CFR 890.5500 emit energy at infrared frequencies (approximately 700 to 50,000 nanometers) to provide topical heating and are intended for medical purposes including, but not limited to, temporary increase in local blood circulation and temporary relief of: muscle spasms, minor joint pain and stiffness, minor muscle pain and stiffness, and minor arthritis pain. Devices classified under 21 CFR 890.5500 are exempt from premarket notification unless they exceed the limitations on exemption at 21 CFR 890.9(a). However, there is evidence that the Diowave 250 WLS and Diowave 100 WLS are intended for uses that are different from the intended use of the type of devices classified under 21 CFR 890.5500 Infrared Lamp. For example, your distribution of the Diowave 100 WLS and Diowave 250 WLS devices includes the following claims:\no “a painless, non-surgical, and side-effective way to treat conditions previously refractive to traditional medical care”\no “treatment of various pathologies, including those refractive to traditional therapy”\no “Because laser therapy is the only treatment in medicine that actually heals living tissue, most conditions respond favorably to repeated laser therapy treatments. It has been proven to deliver results when all other forms of insurance-based medicine have failed.”\no “This technology has shown great promise in healing conditions which are refractive or non-responsive to all other forms of treatment and surgery, including HPLT [High Power Laser Therapy]”\no “peripheral neuropathy” case study: “An 80-year-old male with advance circulatory disease in his lower extremities presents with numbness in his feet and toes. He cannot drive because he cannot feel his feet…by the end of 12 visits, his proprioception to the bottom of his feet returned”\no “Summation of Various Main Treatment Indications for Diowave:…abdominalpain, pelvic pain, wound care”\no “Difficult to treat pathologies that are adequately treated by Diowave: post-surgical pain, implantable device pocket pain, surgically fused areas in which insurance will not cover further treatment, areas that do not respond well to nerve blocks or joint injections, “disc pathology, wounds refractory to conventional medical treatment, after regenerative medicine treatment: using laser to amplify effects of regenerative medicine treatments by kickstarting the process.”\no “results come from the laser’s ability to stimulate tissue growth and repair…results in accelerated wound healing with a dramatic decrease in…inflammation, and scar tissue formation”\nFurther, we note that your firm has an existing clearance (K121363) under 21 CFR 890.5500 with the following indications:\n“The Diowave Laser System is intended to emit energy in the infrared spectrum to provide topical heating for the purpose of elevating tissue temperature for temporary relief of minor muscle and joint pain, muscle spasm, pain and stiffness associated with minor arthritis, promoting relaxation of muscle tissue, and to temporarily increase local blood circulation.”\nYour firm’s promotion of the device provides evidence that the device is intended for conditions beyond the indications for which it was cleared. Examples of these claims are included above. This constitutes a major change or modification in the intended use. Thus, a new premarket notification is required. Additionally, your firm’s promotion of the device provides evidence that your firm made a technological change to the device that could significantly affect the safety or effectiveness of the device. Examples of these claims are included above. This change is a significant change or modification for which a new premarket notification is required.\nFor a device requiring premarket approval, the notification required by section 510(k) of the Act, 21 U.S.C. § 360(k), is deemed satisfied when a PMA is pending before the agency. 21 CFR 807.81(b). The kind of information that your firm needs to submit in order to obtain approval or clearance for the device is described on the Internet at http:\u002F\u002Fwww.fda.gov\u002FMedicalDevices\u002FDeviceRegulationandGuidance\u002FHowtoMarketYourDevice\u002Fd efault.htm. The FDA will evaluate the information that your firm submits and decide whether the product may be legally marketed.\nOur office requests that Technological Medical Advancements LLC cease any activities that result in the misbranding or adulteration of the Diowave 100 WLS and Diowave 250 WLS devices, such as the commercial distribution of the device, for the uses discussed above.\nQuality System Regulation Violations\nThis inspection revealed that these devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820. Your firm’s response dated May 23, 2025, to the Form FDA 483 (FDA 483) was not received within fifteen business days of issuance of the FDA 483 however we performed a review of your response. These violations include, but are not limited to, the following:\n1. Failure to adequately establish procedures to ensure that all purchased or otherwise received products and services conform to specified requirements, as required by 21 CFR 820.50.Specifically,\nA. Your firm has failed to perform supplier evaluations as required by Purchasing Control Standard Operating Procedure, TMAQSP007, Revision 2.0. These include evaluations for critical suppliers, comprised of your contract manufacturer and designer (b)(4) and your contract service firm (b)(4), as required by Section 3 of your procedure. Additionally, no (b)(4) evaluations were conducted for any suppliers despite procedural requirements, and no justification was provided for not performing them.\nB. Your firm failed to maintain supplier agreements as required by your Supplier Evaluation and Monitoring Standard Operating Procedure, TMA_QSP_023. For example, section 6.1.2 of your procedure states that “a Quality Agreement\u002FCritical Supplier Quality Agreement is drafted and signed between both parties.” However, your firm has unsigned agreements with your contract manufacturer, including both the Critical Supplier Quality Agreement and Software Agreement. During the inspection, your contract manufacturer was unable to provide required design control records for review.\nC. The inspection noted that your firm failed to have adequate purchasing controls and supplier oversight of your firm’s contract manufacturer, (b)(4), responsible for design controls. Your firm's inability to retrieve basic design control records from your contract designer\u002Fmanufacturer during the FDA inspection, despite claims that these documents existed, demonstrates inadequate oversight of critical supplier activities. For example:\ni. Your firm could not provide the Design History File (DHF) records for the Diowave 250 WLS and Diowave 100 WLS medical devices. The inspection found no evidence of essential design control records including design planning, design inputs, design outputs, design reviews, design verification, design validation, design change or design transfer, representing a comprehensive failure to maintain adequate design control records as required by FDA regulations. As such, FDA is concerned that the medical devices will not consistently meet intended use and safety requirements, that design changes are not properly controlled and documented, and that the finished device design may not meet user needs and intended use.\nii. The design risk management files for the Diowave 250 WLS and Diowave 100WLS laser device were not available for review. No records were available toreview by FDA investigators for design risk analysis despite your proceduralrequirements in section 3.4 of Risk Management Standard Operating Procedure,TMAQSP043, Revision 1.0, to incorporate risk analysis into your firm’s DesignReview. No risk assessment was available for review for the power increase from (b)(4)W to (b)(4)W. No evaluation on the potential need to submit a new premarket application was performed.\niii. Your firm’s Supplier Evaluation and Monitoring Standard OperatingTMA_QSP_023, Revision 1 states in section 6.2 that “(b)(4). ”There have been significant modifications to your devices without notification from critical supplier or oversight and approval of changes by your firm. This includes the review of design control records such as design verification and design validation to include risk analysis. For example, design control records for changes to software ((b)(4) for 250 WLS, (b)(4) for 100 WLS), as well as an identified power increase for the Diowave laser systems from (b)(4)W to (b)(4)W were not available for review during the inspection.\nWe reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Your firm’s response does not address deficiencies with the purchasing controls and oversight of the design control activities delegated to your contract manufacturer. In addition, while your firm provided some design control records from your contract manufacturer, (b)(4), you did not provide records that include the changes to the Diowave Laser System 100 WLS\u002F250 WLS or design inputs, and therefore, we are unable determine if the device design outputs meet the design inputs. The design output records provided are missing complete device specifications, manufacturing specifications, software design specifications and labeling specifications. The design review documents are missing design reviews for all phases of the device design plan. There is no design change control for design changes previously described. The design transfer document does not include all required design transfer activities and any manufacturing process validations performed. Following our review of your response, you have not addressed the deficiencies in your firm’s design control subsystem and the requirement for a complete design history file (DHF) for your medical devices.\n2. Failure to establish and maintain procedures for receiving, reviewing, and evaluating complaints by a formally designated unit and to maintain complaint files, as required by 21CFR 820.198(a). For example:\nA. FDA investigators reviewed ten complaints from 2025 and identified comprehensive procedural failures for the receipt, review, and evaluation of complaints. Your firm failed to implement Customer Complaints procedure, TMAQSP003, Revision 3.0,and perform required procedural activities for all complaints reviewed, including complaint investigations, failure mode analysis, Management Representative approval, and completing all fields in the complaint forms.\nB. Your firm failed to handle all complaints in a timely manner. For example, your firm has not reviewed or evaluated (b)(4) servicing records from the third-party supplier as specified by your procedure TMA_QSP_009 Servicing, Rev 2.0, so that the Management Representative can determine if they meet the definition of a complaint so that they can be investigated as necessary.\nWe reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address this inspectional observation, and therefore is missing a corrective action plan, time frames for implementation, and documentation of activities performed to correct the underlying deficiency.\n3. Your firm has failed to adequately establish and maintain procedures for corrective and preventive action, as required by 21 CFR 820.100(a). Specifically, your firm has not adequately established CAPA Procedure, TMAQSP012, Revision 1.0. For example:\nA. Your procedure lacks requirements for analyzing processes, work operations, concessions, quality audit reports, quality records, service records, complaints, returned product, and other sources of quality data to identify existing and potential causes of nonconforming product, or other quality problems.\nB. Your firm has not implemented Section 3.2 of the CAPA procedure to identify actions needed to correct and prevent the recurrence of any non-conformity. For example, your firm has not opened any corrective and preventive actions, as required by your procedure, after it has been cited with the following:\ni. Fourteen inspectional observations from an FDA inspection conducted from August 4, 2021, to September 9, 2021;\nii. Thirteen observations, along with seven verbal observations, from an FDA inspection conducted from February 19, 2020 to February 24, 2020;\niii. Twelve violations cited in a letter sent to your firm on June 8, 2020, by FDA.\nThis FDA inspection, along with previous FDA inspections, have identified repeat systemic deficiencies of your firm’s inability to identify actions to correct and prevent the recurrence of quality problems.\nWe reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\n4. Your firm has failed to establish and maintain adequate procedures for quality audits, as required by 21 CFR 820.22. Specifically, your firm did not conduct quality audits in 2023and 2024 as required by your Internal Audit Standard Operating Procedure, TMAQSP004,Revision 1.0. As of the date of the inspection, no quality audit has been conducted in 2025.\nWe reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\n5. Your firm has failed to establish procedures to control product that does not conform to specified requirements, as required by 21 CFR 820.90(a). Specifically, your firm does not have a procedure for addressing nonconforming products or materials. When the FDA investigator asked about procedures for nonconforming products or materials, you stated that such procedures did not exist. Without procedures to define nonconformance criteria and disposition processes, your firm cannot effectively identify or manage quality issues that may arise during manufacturing, incoming inspection, acceptance testing activities or as part of post-market surveillance activities.\nWe reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\n6. Your firm has failed to adequately establish and maintain procedures for management review, as required by 21 CFR 820.20(c). Specifically, your firm did not follow Management Review Standard Operating Procedure, TMAQSP010, Revision 1.0, which requires periodic management review at least (b)(4). Your firm did not conduct a management review in 2024, thereby failing to determine the effectiveness of your quality system. This inspection identified several inspectional observations and deficiencies that have gone uncorrected from the two previous FDA inspections or approximately 5 years.\nWe reviewed your firm’s response dated May 23, 2025, and conclude that it is not adequate. Specifically, your firm’s response does not address the inspectional observation, and therefore is missing a corrective action plan, time frames for implementation and documentation of activities performed to correct the underlying deficiency.\nUnique Device Identifier Regulation (UDI) Violations\nThe inspection revealed that your devices are misbranded within the meaning of section 502(c) of the Act, 21 U.S.C. § 352(c), because a word, statement, or other information required by or under authority of section 519 of the Act, 21 U.S.C. § 360i, to appear on the label or labeling of the devices was not prominently placed thereon with such conspicuousness (as compared with other words, statements, designs, or devices, in the labeling) and in such terms as to render it likely to be read and understood by the ordinary individual under customary conditions of purchase and use. In particular, 21 CFR 801.20(a) – which was promulgated under authority of section 519 of the Act, among other provisions – requires, with exceptions not relevant here, that the label and device package of every medical device bear a unique device identifier (UDI) that meets the requirements of 21 CFR Part 801, subpart B, and 21 CFR Part 830. The labels of the Diowave Pure Pulse Laser System devices do not bear such a UDI.\nSpecifically, the labels for Diowave Pure Pulse Laser System devices do not include a device identifier within the meaning of 21 CFR 801.3 or 830.3, and there is no UDI presented in easily readable plain-text on the label of the device (see 21 CFR 801.40(a)(1)), and there is no UDI presented in machine-readable form that uses automatic identification and data capture (AIDC) technology on the label of the device (see 21 CFR 801.40(a)(2)).\nA follow-up inspection will be required to assure that corrections and\u002For corrective actions are adequate. Your firm should take prompt action to address any violations identified in this letter. Failure to adequately address this matter may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\nOther federal agencies may take your compliance with the FD&C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration as part of your response.\nYour firm’s response should be sent via email to Melissa Michurski, Assistant Director at CDRHEnforcement@fda.hhs.gov. Please include in the subject line, “CMS Case 712715” when replying. If you have any questions about the contents of this letter, please contact: Rafael Padilla at Rafael.Padilla@FDA.hhs.gov.\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\nSincerely,\n\u002FS\u002F\nBarbara C. Marsden\nActing Director\nOffice of Regulatory Programs\nOffice of Product Evaluation and Quality\nCenter for Devices and Radiological Health","Technological Medical Advancements LLC","technological-medical-advancements-llc-712715-09262025","2026-08-18T06:42:28.676509+00:00","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Ftechnological-medical-advancements-llc-712715-09262025","2026-10-26T08:10:10.367898+00:00","2025-10-07","712715","Dr. Bruce R. Coren, DVM, MS","2026-08-19T16:15:16.641+00:00","2025-09-26",{"id":73,"raw":74,"subject":78,"body_html":79,"body_text":80,"firm_name":81,"letter_id":82,"created_at":19,"fei_number":20,"letter_url":83,"updated_at":84,"action_type":23,"case_status":48,"posted_date":85,"marcs_cms_no":86,"product_type":27,"closeout_date":20,"issuing_office":39,"recipient_name":20,"body_fetched_at":87,"delivery_method":20,"recipient_title":20,"reference_number":20,"action_taken_date":88,"medical_device_id":20,"response_letter_date":20},3219,[75,76,77,39,78,13,13,13],"\u003Ctime datetime=\"2021-08-10T13:20:00Z\">08\u002F10\u002F2021\u003C\u002Ftime>\n","\u003Ctime datetime=\"2021-07-29T04:00:00Z\">07\u002F29\u002F2021\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Flepu-medical-technology-beijing-co-ltd-614908-07292021\">Lepu Medical Technology -Beijing- Co., Ltd.\u003C\u002Fa>","Adulterated and Misbranded Products Related to Coronavirus Disease 2019 (COVID-19)","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\u003C\u002Fdd>\n                    \n            \u003Cdd>Lepu Medical Technology -Beijing- Co., Ltd.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>No. 37 Chaoqian Rd.\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Changping Qu\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Beijing Shi\u003C\u002Fspan>,\u003Cbr>\n\u003Cspan>China\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:lee-fu@mid-link.net\"> lee-fu@mid-link.net\u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Devices and Radiological Health\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Date: July 29, 2021\u003C\u002Fp>\n\n\u003Cp>RE: Adulterated and Misbranded Products Related to Coronavirus Disease 2019 (COVID-19)\u003C\u002Fp>\n\n\u003Cp>This is to advise you that the United States Food and Drug Administration (FDA) has observed that your firm offers for sale a Neutralization Antibody Test kit (Colloidal Gold, Fluorescent, Elisa), a SARS-CoV-2 Antigen Rapid Test Kit (Colloidal Gold Immunochromatography), and a Saliva Antigen Rapid Test (hereinafter collectively referred to as “COVID-19 Test Kits”) in the United States. Based on our review, your COVID-19 Test Kits are intended for use in the mitigation, prevention, treatment, diagnosis, or cure of COVID-19\u003Csup>\u003Cem>\u003Cstrong>1\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup> in people, and thus, they are devices under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the “Act”), 21 U.S.C. § 321(h).\u003C\u002Fp>\n\n\u003Cp>The COVID-19 Test Kits are offered for sale in the United States without marketing approval, clearance, or authorization from FDA. Accordingly, your COVID-19 Test Kits are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have approved applications for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or approved applications for an investigational device exemption (IDE) under section 520(g) of the Act, 21 U.S.C. § 360j(g). Your products are also misbranded under section 502(o) of the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the devices into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C. § 360(k). The introduction or delivery for introduction of these products into interstate commerce is prohibited under section 301(a) of the Act, 21 U.S.C. § 331(a). In addition, it is a prohibited act under section 301(k) of the Act, 21 U.S.C. § 331(k), to do any act with respect to a device while the device is held for sale after shipment in interstate commerce and results in the device being misbranded.\u003C\u002Fp>\n\n\u003Cp>There is currently a global outbreak of respiratory disease caused by a novel coronavirus that has been named “severe acute respiratory syndrome coronavirus 2” (SARS-CoV-2). The disease caused by the virus has been named “Coronavirus Disease 2019” (COVID-19). On January 31, 2020, the Department of Health and Human Services (HHS) issued a declaration of a public health emergency related to COVID-19 and mobilized the Operating Divisions of HHS.\u003Csup>\u003Cem>\u003Cstrong>2\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup> In addition, on March 13, 2020, the President declared a national emergency in response to COVID-19.\u003Csup>\u003Cem>\u003Cstrong>3\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup> Therefore, FDA is taking urgent measures to protect consumers from certain products that, without approval, clearance, or authorization by FDA, claim to mitigate, prevent, treat, diagnose, or cure COVID-19 in people. As described herein, you sell products that are intended for use in the mitigation, prevention, treatment, diagnosis, or cure of COVID-19 in people. We request that you take immediate action to cease the sale of such unapproved, uncleared, and unauthorized products for use in the mitigation, prevention, treatment, diagnosis, or cure of COVID-19.\u003C\u002Fp>\n\n\u003Cp>For more information about FDA’s regulation of devices used to mitigate, prevent, treat, diagnose, or cure COVID-19; frequently asked questions; and other helpful resources, visit our website at https:\u002F\u002Fwww.fda.gov\u002Fmedical-devices\u002Femergency-situations-medical-devices\u002Fcoronavirus-covid-19-and-medical-devices. In addition, the guidance titled “Policy for Coronavirus Disease 2019 Tests During the Public Health Emergency (Revised)”\u003Csup>\u003Cem>\u003Cstrong>4\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup> provides information about FDA’s policies intended to help expand testing capacity by facilitating the development and use of COVID-19 tests during the public health emergency.\u003C\u002Fp>\n\n\u003Cp>You should take immediate action to address the violations cited in this letter. This letter is not meant to be an all-inclusive list of violations that exist in connection with your products or operations. It is your responsibility to ensure that the products you sell are in compliance with the Act and its implementing regulations. We advise you to review your websites, product labels, and other labeling and promotional materials to ensure that you are not misleadingly representing your products as safe and\u002For effective for a COVID-19-related use for which they have not been approved, cleared, or authorized by FDA and that you do not make claims that adulterate or misbrand the products in violation of the Act. \u003Cstrong>Within 48 hours, please send an email to COVID-19-Task-Force-CDRH@fda.hhs.gov\u003C\u002Fstrong> describing the specific steps you have taken to address these violations. Include an explanation of each step being taken to prevent the recurrence of any violations, as well as copies of related documentation. Failure to adequately correct any violations may result in legal action, including, without limitation, seizure and injunction.\u003C\u002Fp>\n\n\u003Cp>FDA is advising consumers not to purchase or use certain products that are not in compliance with FDA requirements and are being misleadingly represented as safe and\u002For effective for the mitigation, prevention, treatment, diagnosis or cure of COVID-19. Your firm will be added to a published list on FDA's website of firms and websites that have received warning letters from FDA concerning the sale or distribution of COVID-19 related products in violation of the Act. This list can be found at https:\u002F\u002Fwww.fda.gov\u002Fconsumers\u002Fhealth-fraud-scams\u002Ffraudulent-coronavirus-disease-2019-covid-19-products. Once you have taken actions to address the sale of your unapproved, uncleared, and unauthorized products for the mitigation, prevention, treatment, diagnosis, or cure of COVID-19, and any appropriate actions have been confirmed by the FDA, the published list will be updated to indicate that your firm has taken such corrective actions.\u003C\u002Fp>\n\n\u003Cp>This letter notifies you of our concerns and provides you with an opportunity to address them. If you cannot take action to address this matter completely within 48 hours, state the reason for the delay and the time within which you will do so. If you believe that your product is not in violation of the Act, include your reasoning and any supporting information for our consideration.\u003C\u002Fp>\n\n\u003Cp>If you are not located in the United States, please note that products that appear to be adulterated or misbranded are subject to detention and refusal of admission if they are offered for importation into the United States. We may advise the appropriate regulatory officials in the country from which you operate that FDA considers your products listed above to be adulterated and misbranded products that cannot be legally sold to consumers in the United States.\u003C\u002Fp>\n\n\u003Cp>Please direct any inquiries to FDA at COVID-19-Task-Force-CDRH@fda.hhs.gov.\u003C\u002Fp>\n\n\u003Cp>Sincerely,\u003Cbr>\n\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>Timothy T. Stenzel, M.D., Ph.D.\u003Cbr>\nDirector\u003Cbr>\nOHT7: Office of In Vitro Diagnostics and Radiological\u003Cbr>\nHealth\u003Cbr>\nOffice of Product Evaluation and Quality\u003Cbr>\nCenter for Devices and Radiological Health\u003C\u002Fp>\n\n\u003Cp>_________________________________________\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>1\u003C\u002Fstrong>\u003C\u002Fem> As explained below, there is currently an outbreak of a respiratory disease named “Coronavirus Disease 2019” (COVID-19).\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>2\u003C\u002Fstrong>\u003C\u002Fem> Secretary of Health and Human Services Alex M. Azar II, Determination that a Public Health Emergency Exists (originally issued Jan. 31, 2020 and subsequently renewed), available at https:\u002F\u002Fwww.phe.gov\u002Femergency\u002Fnews\u002Fhealthactions\u002Fphe\u002FPages\u002Fdefault.aspx).\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>3\u003C\u002Fstrong>\u003C\u002Fem> President Donald J. Trump, Proclamation on Declaring a National Emergency Concerning the Novel Coronavirus Disease (COVID-19) (Mar. 13, 2020), available at https:\u002F\u002Fwww.whitehouse.gov\u002Fpresidential-actions\u002Fproclamationdeclaring-national-emergency-concerning-novel-coronavirus-disease-covid-19-outbreak\u002F).\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>4\u003C\u002Fstrong>\u003C\u002Fem> Accessible at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F135659\u002Fdownload.\u003C\u002Fp>\n\n\n\n\n\n\n\n              \n                                            \n              \n            ","Product:\n\nMedical Devices\n\nRecipient:\n\nLepu Medical Technology -Beijing- Co., Ltd.\n\nNo. 37 Chaoqian Rd.\n\nChangping Qu\n\nBeijing Shi,\n\nChina\n\nlee-fu@mid-link.net\n\nIssuing Office:\n\nCenter for Devices and Radiological Health\n\nUnited States\n\nWARNING LETTER\n\nDate: July 29, 2021\n\nRE: Adulterated and Misbranded Products Related to Coronavirus Disease 2019 (COVID-19)\n\nThis is to advise you that the United States Food and Drug Administration (FDA) has observed that your firm offers for sale a Neutralization Antibody Test kit (Colloidal Gold, Fluorescent, Elisa), a SARS-CoV-2 Antigen Rapid Test Kit (Colloidal Gold Immunochromatography), and a Saliva Antigen Rapid Test (hereinafter collectively referred to as “COVID-19 Test Kits”) in the United States. Based on our review, your COVID-19 Test Kits are intended for use in the mitigation, prevention, treatment, diagnosis, or cure of COVID-191 in people, and thus, they are devices under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the “Act”), 21 U.S.C. § 321(h).\n\nThe COVID-19 Test Kits are offered for sale in the United States without marketing approval, clearance, or authorization from FDA. Accordingly, your COVID-19 Test Kits are adulterated under section 501(f)(1)(B) of the Act, 21 U.S.C. § 351(f)(1)(B), because your firm does not have approved applications for premarket approval (PMA) in effect pursuant to section 515(a) of the Act, 21 U.S.C. § 360e(a), or approved applications for an investigational device exemption (IDE) under section 520(g) of the Act, 21 U.S.C. § 360j(g). Your products are also misbranded under section 502(o) of the Act, 21 U.S.C. § 352(o), because your firm did not notify the agency of its intent to introduce the devices into commercial distribution, as required by section 510(k) of the Act, 21 U.S.C. § 360(k). The introduction or delivery for introduction of these products into interstate commerce is prohibited under section 301(a) of the Act, 21 U.S.C. § 331(a). In addition, it is a prohibited act under section 301(k) of the Act, 21 U.S.C. § 331(k), to do any act with respect to a device while the device is held for sale after shipment in interstate commerce and results in the device being misbranded.\n\nThere is currently a global outbreak of respiratory disease caused by a novel coronavirus that has been named “severe acute respiratory syndrome coronavirus 2” (SARS-CoV-2). The disease caused by the virus has been named “Coronavirus Disease 2019” (COVID-19). On January 31, 2020, the Department of Health and Human Services (HHS) issued a declaration of a public health emergency related to COVID-19 and mobilized the Operating Divisions of HHS.2 In addition, on March 13, 2020, the President declared a national emergency in response to COVID-19.3 Therefore, FDA is taking urgent measures to protect consumers from certain products that, without approval, clearance, or authorization by FDA, claim to mitigate, prevent, treat, diagnose, or cure COVID-19 in people. As described herein, you sell products that are intended for use in the mitigation, prevention, treatment, diagnosis, or cure of COVID-19 in people. We request that you take immediate action to cease the sale of such unapproved, uncleared, and unauthorized products for use in the mitigation, prevention, treatment, diagnosis, or cure of COVID-19.\n\nFor more information about FDA’s regulation of devices used to mitigate, prevent, treat, diagnose, or cure COVID-19; frequently asked questions; and other helpful resources, visit our website at https:\u002F\u002Fwww.fda.gov\u002Fmedical-devices\u002Femergency-situations-medical-devices\u002Fcoronavirus-covid-19-and-medical-devices. In addition, the guidance titled “Policy for Coronavirus Disease 2019 Tests During the Public Health Emergency (Revised)”4 provides information about FDA’s policies intended to help expand testing capacity by facilitating the development and use of COVID-19 tests during the public health emergency.\n\nYou should take immediate action to address the violations cited in this letter. This letter is not meant to be an all-inclusive list of violations that exist in connection with your products or operations. It is your responsibility to ensure that the products you sell are in compliance with the Act and its implementing regulations. We advise you to review your websites, product labels, and other labeling and promotional materials to ensure that you are not misleadingly representing your products as safe and\u002For effective for a COVID-19-related use for which they have not been approved, cleared, or authorized by FDA and that you do not make claims that adulterate or misbrand the products in violation of the Act. Within 48 hours, please send an email to COVID-19-Task-Force-CDRH@fda.hhs.gov describing the specific steps you have taken to address these violations. Include an explanation of each step being taken to prevent the recurrence of any violations, as well as copies of related documentation. Failure to adequately correct any violations may result in legal action, including, without limitation, seizure and injunction.\n\nFDA is advising consumers not to purchase or use certain products that are not in compliance with FDA requirements and are being misleadingly represented as safe and\u002For effective for the mitigation, prevention, treatment, diagnosis or cure of COVID-19. Your firm will be added to a published list on FDA's website of firms and websites that have received warning letters from FDA concerning the sale or distribution of COVID-19 related products in violation of the Act. This list can be found at https:\u002F\u002Fwww.fda.gov\u002Fconsumers\u002Fhealth-fraud-scams\u002Ffraudulent-coronavirus-disease-2019-covid-19-products. Once you have taken actions to address the sale of your unapproved, uncleared, and unauthorized products for the mitigation, prevention, treatment, diagnosis, or cure of COVID-19, and any appropriate actions have been confirmed by the FDA, the published list will be updated to indicate that your firm has taken such corrective actions.\n\nThis letter notifies you of our concerns and provides you with an opportunity to address them. If you cannot take action to address this matter completely within 48 hours, state the reason for the delay and the time within which you will do so. If you believe that your product is not in violation of the Act, include your reasoning and any supporting information for our consideration.\n\nIf you are not located in the United States, please note that products that appear to be adulterated or misbranded are subject to detention and refusal of admission if they are offered for importation into the United States. We may advise the appropriate regulatory officials in the country from which you operate that FDA considers your products listed above to be adulterated and misbranded products that cannot be legally sold to consumers in the United States.\n\nPlease direct any inquiries to FDA at COVID-19-Task-Force-CDRH@fda.hhs.gov.\n\nSincerely,\n\n\u002FS\u002F\n\nTimothy T. Stenzel, M.D., Ph.D.\n\nDirector\n\nOHT7: Office of In Vitro Diagnostics and Radiological\n\nHealth\n\nOffice of Product Evaluation and Quality\n\nCenter for Devices and Radiological Health\n\n_________________________________________\n\n1 As explained below, there is currently an outbreak of a respiratory disease named “Coronavirus Disease 2019” (COVID-19).\n\n2 Secretary of Health and Human Services Alex M. Azar II, Determination that a Public Health Emergency Exists (originally issued Jan. 31, 2020 and subsequently renewed), available at https:\u002F\u002Fwww.phe.gov\u002Femergency\u002Fnews\u002Fhealthactions\u002Fphe\u002FPages\u002Fdefault.aspx).\n\n3 President Donald J. Trump, Proclamation on Declaring a National Emergency Concerning the Novel Coronavirus Disease (COVID-19) (Mar. 13, 2020), available at https:\u002F\u002Fwww.whitehouse.gov\u002Fpresidential-actions\u002Fproclamationdeclaring-national-emergency-concerning-novel-coronavirus-disease-covid-19-outbreak\u002F).\n\n4 Accessible at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F135659\u002Fdownload.","Lepu Medical Technology -Beijing- Co., Ltd.","lepu-medical-technology-beijing-co-ltd-614908-07292021","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Flepu-medical-technology-beijing-co-ltd-614908-07292021","2026-10-26T08:09:13.643652+00:00","2021-08-10","614908","2026-08-20T02:42:51.907+00:00","2021-07-29",{"id":90,"raw":91,"subject":96,"body_html":97,"body_text":98,"firm_name":99,"letter_id":100,"created_at":101,"fei_number":20,"letter_url":102,"updated_at":103,"action_type":23,"case_status":48,"posted_date":104,"marcs_cms_no":105,"product_type":106,"closeout_date":20,"issuing_office":95,"recipient_name":107,"body_fetched_at":108,"delivery_method":109,"recipient_title":20,"reference_number":20,"action_taken_date":110,"medical_device_id":20,"response_letter_date":20},234,[92,93,94,95,96,13,13,13],"\u003Ctime datetime=\"2026-04-14T04:00:00Z\">04\u002F14\u002F2026\u003C\u002Ftime>\n","\u003Ctime datetime=\"2026-04-09T04:00:00Z\">04\u002F09\u002F2026\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fmedical-products-laboratories-inc-721916-04092026\">Medical Products Laboratories, Inc.\u003C\u002Fa>","Center for Drug Evaluation and Research (CDER)","CGMP\u002FFinished Pharmaceuticals\u002FAdulterated\u002FUnapproved New Drug","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>VIA UPS\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Drugs                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Mr. Elliot Stone\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>President\u002FCEO\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Medical Products Laboratories, Inc.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>9990 Global Road\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Philadelphia\u003C\u002Fspan>, \u003Cspan>PA\u003C\u002Fspan> \u003Cspan>19115\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Drug Evaluation and Research (CDER)\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>Warning Letter\u003C\u002Fstrong> 320-26-61\u003C\u002Fp>\u003Cp>April 9, 2026\u003C\u002Fp>\u003Cp>Dear Mr. Stone:\u003C\u002Fp>\u003Cp>The United States Food and Drug Administration (FDA) inspected your drug manufacturing facility, Medical Products Laboratories, Inc., FEI 2513595, at 9990 Global Road, Philadelphia, from September 29 to October 16, 2025.\u003C\u002Fp>\u003Cp>This warning letter summarizes significant violations of Current Good Manufacturing Practice (CGMP) regulations for finished pharmaceuticals. See Title 21 Code of Federal Regulations (CFR), parts 210 and 211 (21 CFR parts 210 and 211).\u003C\u002Fp>\u003Cp>Because your methods, facilities, or controls for manufacturing, processing, packing, or holding do not conform to CGMP, your drug products are adulterated within the meaning of section 501(a)(2)(B) of the Federal Food, Drug, and Cosmetic Act (FD&amp;C Act), 21 U.S.C. 351(a)(2)(B).\u003C\u002Fp>\u003Cp>Your firm manufactures and is responsible for introducing or delivering for introduction into interstate commerce in the United States products that are unapproved new drugs in violation of sections 301(d) and 505(a) of the FD&amp;C Act, 21 U.S.C. Sections 331(d) and 355(a), including but not limited to: Hydro-Q 4% Gel (hydroquinone 4%); Sodium Sulfacetamide 8% and Sulfur 4% Topical Suspension; Sodium Sulfacetamide 9% and Sulfur 4% Wash; Sodium Sulfacetamide 9.8% Shampoo; Sodium Sulfacetamide 9.8% and Sulfur 4.8% Cleanser; Sodium Sulfacetamide 9.8% and Sulfur 4.8% Lotion; Sodium Sulfacetamide 9.8% and Sulfur 4.8% Cream; Sodium Sulfacetamide 10% and Sulfur 5% Cleanser; Sodium Sulfacetamide 10% Wash; Salicylic Acid 28.5% Solution; Plexion Shampoo (sodium sulfacetamide 9.8%); Plexion Lotion (sodium sulfacetamide 9.8% and sulfur 4.8%), Plexion Cream (sodium sulfacetamide 9.8% and sulfur 4.8%) as prescription drug products. Based on our review, these products are unapproved new drugs under section 505(a) of the FD&amp;C Act, 21 U.S.C. Section 355(a). As explained further below, introducing or delivering these products for introduction into interstate commerce violates sections 301(d) and 505(a) of the FD&amp;C Act, 21 U.S.C. Sections 331(d) and 355(a).\u003C\u002Fp>\u003Cp>We reviewed your November 6, 2025 response to our Form FDA 483 in detail and acknowledge receipt of your subsequent correspondence.\u003C\u002Fp>\u003Cp>During our inspection, our investigators observed specific violations including, but not limited to, the following.\u003C\u002Fp>\u003Cp>\u003Cstrong>CGMP Violations\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>\u003Cstrong>1. Your firm failed to establish and follow appropriate written procedures, designed to prevent objectionable microorganisms in drug products not required to be sterile (21 CFR 211.113(a)).\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>\u003Cem>Microbiological Results in Finished Drug Product and \u003Cstrong>(b)(4)\u003C\u002Fstrong> Samples\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Your firm manufactures prescription and over-the-counter (OTC) drug products for \u003Cstrong>(b)(4)\u003C\u002Fstrong> administration. You failed to adequately establish and follow procedures to prevent contamination with objectionable microorganisms. For example, you used an unvalidated \u003Cstrong>(b)(4)\u003C\u002Fstrong> treatment protocol on filled drug product batches in an attempt to reduce microbiological content. Your laboratory reported gross microbiological contamination on plates for both total aerobic microbiological count (TAMC) and total yeast and mold count (TYMC) tests in the following non-sterile finished drug products for \u003Cstrong>(b)(4)\u003C\u002Fstrong> administration:\u003C\u002Fp>\u003Cul>\u003Cli>\u003Cstrong>(b)(4)\u003C\u002Fstrong> lot \u003Cstrong>(b)(4)\u003C\u002Fstrong> (TAMC: too numerous to count (TNTC) and TYMC: TNTC)\u003C\u002Fli>\u003Cli>\u003Cstrong>(b)(4)\u003C\u002Fstrong> lot \u003Cstrong>(b)(4)\u003C\u002Fstrong> (TAMC: TNTC and TYMC: TNTC)\u003C\u002Fli>\u003Cli>\u003Cstrong>(b)(4)\u003C\u002Fstrong> lot \u003Cstrong>(b)(4)\u003C\u002Fstrong> (TAMC: TNTC and TYMC: \u003Cstrong>(b)(4)\u003C\u002Fstrong> colony forming units (CFU) per gram)\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Your investigation of the failing results in \u003Cstrong>(b)(4)\u003C\u002Fstrong> lot \u003Cstrong>(b)(4)\u003C\u002Fstrong> concluded that contamination was from the \u003Cstrong>(b)(4)\u003C\u002Fstrong> component, recovered from a mixture of this component with \u003Cstrong>(b)(4)\u003C\u002Fstrong>. However, your investigation failed to consider out-of-limit (OOL) microbiological recoveries from your \u003Cstrong>(b)(4)\u003C\u002Fstrong> system.\u003C\u002Fp>\u003Cp>You subsequently released drug products based on results from \u003Cstrong>(b)(4)\u003C\u002Fstrong> treatment resampling. Your corrective action and preventive action (CAPA) in response to the microbiological contamination included revising the drug product formulation to increase \u003Cstrong>(b)(4)\u003C\u002Fstrong> content. \u003Cstrong>(b)(4)\u003C\u002Fstrong> are not a substitute for a comprehensive approach to preventing objectionable microorganisms from contaminating your drug products and cannot be relied on to reduce in-process bioburden during manufacturing.\u003C\u002Fp>\u003Cp>We note that on \u003Cstrong>(b)(4)\u003C\u002Fstrong>, you issued a voluntary recall of \u003Cstrong>(b)(4)\u003C\u002Fstrong>, lots \u003Cstrong>(b)(4)\u003C\u002Fstrong>, due to microbiological contamination.\u003C\u002Fp>\u003Cp>Your response commits to revising your procedures to no longer allow \u003Cstrong>(b)(4)\u003C\u002Fstrong> treatment to rework batches after failing microbiological results and to place a reworked batch on real-time stability. You also include a risk assessment which concludes there is no health risk for two failing lots. Your response is inadequate in that your risk assessment does not extend to all drug products where \u003Cstrong>(b)(4)\u003C\u002Fstrong> treatment was attempted, nor does your response provide your plans for addressing product quality and patient safety risks for lots on which you used \u003Cstrong>(b)(4)\u003C\u002Fstrong> treatment or product you released after failing microbiological results. Moreover, your response does not address whether additional bacterial species were present, nor did you provide evidence supporting your claims that growth on total yeast and mold plates was solely bacterial.\u003C\u002Fp>\u003Cp>This adverse pattern of microbiological contamination in your drug products demonstrates a significant failure to adhere to CGMP. Unresolved manufacturing and quality problems can pose a significant hazard to patients.\u003C\u002Fp>\u003Cp>In response to this letter, provide:\u003C\u002Fp>\u003Cul>\u003Cli>A comprehensive, independent assessment of the design and control of your firm’s manufacturing operations, with a detailed and thorough review of all microbiological hazards.\u003C\u002Fli>\u003Cli>A detailed risk assessment addressing the hazards posed by distributing drug products with potentially objectionable contamination. Specify actions you will take in response to the risk assessment, such as customer notifications and product recalls.\u003C\u002Fli>\u003Cli>Complete investigations into all batches with potential objectionable microbiological contamination or a failing microbiological result (whether or not later invalidated). The investigations should detail your findings regarding the root causes of the contamination.\u003C\u002Fli>\u003Cli>Appropriate microbiological batch release specifications (i.e., total counts, identification of bioburden to detect objectionable microbes) for each of your drug products.\u003C\u002Fli>\u003Cli>A summary of results from testing retain samples of all drug product batches of which you have received failing, out-of-specification (OOS), OOL or out-of-trend (OOT) microbiological test results. Also provide test results of retains during periods when your \u003Cstrong>(b)(4)\u003C\u002Fstrong> system was not operating under a state of control. You should test microbiological quality (total counts and identification of bioburden to detect any objectionable microbes) of each batch. If testing yields any failing, OOS or OOL result, indicate the corrective actions you will take, including notifying customers and initiating recalls.\u003C\u002Fli>\u003Cli>A comprehensive remediation plan for the design, control, and maintenance of the \u003Cstrong>(b)(4)\u003C\u002Fstrong> system.\u003Cbr>o Provide a comprehensive evaluation of vulnerabilities of \u003Cstrong>(b)(4)\u003C\u002Fstrong> system design and control, and summarize all deficiencies found in the system. The summary should, at minimum, describe various system characteristics that were assessed for adequacy (system temperature, materials of construction, slope, any identified dead-legs, any stagnant locations, any unsanitary fittings, flow velocity, etc.)\u003C\u002Fli>\u003Cli>Your total microbiological count limits to monitor whether this system is producing \u003Cstrong>(b)(4)\u003C\u002Fstrong> suitable for the intended uses for each of your products.\u003C\u002Fli>\u003Cli>A detailed risk assessment addressing the potential effects of the observed \u003Cstrong>(b)(4)\u003C\u002Fstrong> system failures on the quality of all drug product lots currently within expiry. Specify actions that you will take in response to the risk assessment, such as customer notifications and product recalls.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>2. Your firm failed to establish adequate written procedures for production and process control designed to assure that the drug products you manufacture have the identity, strength, quality, and purity they purport or are represented to possess (21 CFR 211.100(a)).\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>You failed to adequately validate your manufacturing processes to demonstrate that your processes are reproducible and controlled to consistently yield drug products of uniform character and quality. For example, you used a process qualification study performed at a different facility to manufacture and release \u003Cstrong>(b)(4)\u003C\u002Fstrong>. You could not provide evidence your processes (e.g. equipment, components, and manufacturing conditions) were comparable between your facility and the site where initial process validation was performed.\u003C\u002Fp>\u003Cp>Additionally, you failed to adequately validate your process for manufacturing \u003Cstrong>(b)(4)\u003C\u002Fstrong>. While a process validation study for this product had been initiated, it included insufficient data. At the direction of your customer, you discontinued your efforts to complete process validation for this product, yet you continued manufacturing batches for commercial distribution.\u003C\u002Fp>\u003Cp>In your response, you discuss a retrospective review of \u003Cstrong>(b)(4)\u003C\u002Fstrong> batches within expiry. You also indicate that you have paused production of \u003Cstrong>(b)(4)\u003C\u002Fstrong> until process validation activities can be completed. You also state that you have updated your process validation procedure and that you have verified that process validation studies have been conducted for drug products you manufacture. Your response is inadequate in that you did not evaluate the implications of changes made to product formulations for drug products that you manufacture.\u003C\u002Fp>\u003Cp>Process validation evaluates the soundness of design and state of control of a process throughout its lifecycle. Each significant stage of a manufacturing process must be designed appropriately and assure the quality of raw material inputs, in-process materials, and finished drugs. Process qualification studies include intensive monitoring and testing throughout each significant process stage to characterize intra-batch variation and evaluate batches to determine whether an initial state of control has been established.\u003C\u002Fp>\u003Cp>Successful process qualification studies are necessary before commercial distribution. Thereafter, ongoing vigilant oversight of process performance and product quality is necessary to ensure you maintain a stable manufacturing operation throughout the product lifecycle.\u003C\u002Fp>\u003Cp>In response to this letter, provide:\u003C\u002Fp>\u003Cul>\u003Cli>A detailed summary of your validation program for ensuring a state of control throughout the product lifecycle, along with associated procedures. Describe your program for process performance qualification (PPQ), and ongoing monitoring of both intra-batch and inter-batch variation to ensure a continuing state of control.\u003C\u002Fli>\u003Cli>A timeline for performing appropriate PPQ for each of your marketed drug products which lack appropriate studies. Also include an explanation how you will ensure proper satisfactory PPQ studies are performed prior to future distribution of any drug products.\u003C\u002Fli>\u003Cli>A risk assessment for the distributed drug products produced without performing any process validation studies or using inadequately validated processes.\u003C\u002Fli>\u003Cli>Process performance protocol(s), and written procedures for qualification of equipment and facilities.\u003C\u002Fli>\u003Cli>A detailed program, including your procedure, for designing, validating, maintaining, controlling and monitoring each of your manufacturing processes that includes vigilant monitoring of intra-batch and inter-batch variation to ensure an ongoing state of control. Also, include your program for qualification of your equipment and facility.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>3. Your firm failed to thoroughly investigate any unexplained discrepancy or failure of a batch or any of its components to meet any of its specifications, whether or not the batch has already been distributed (21 CFR 211.192).\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>\u003Cem>Finished Drug Product Microbiological Testing\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Your firm failed to adequately investigate failing microbiological results in finished products. For example, your \u003Cstrong>(b)(4)\u003C\u002Fstrong> lot \u003Cstrong>(b)(4)\u003C\u002Fstrong> obtained a failing result of \u003Cstrong>(b)(4)\u003C\u002Fstrong> CFU\u002Fg for TYMC (specification ≤\u003Cstrong>(b)(4)\u003C\u002Fstrong> CFU\u002Fg). After your contract testing laboratory failed to identify the fungal species, you concluded, without evidence, that contamination occurred “during handling, transportation and\u002For testing.” You invalidated this failing result based on results of resampling and released the lot.\u003C\u002Fp>\u003Cp>Microbiological contamination may not be uniformly distributed. A product sample may not be representative of the type or level of contamination within the batch. Further, testing the final product for microbiological contamination does not ensure that you have appropriate controls in place to ensure product quality. As a manufacturer, you have a responsibility to fully investigate unexplained discrepancies, deviations, and failures to assess their impact on product quality.\u003C\u002Fp>\u003Cp>\u003Cem>Stability Assay\u003C\u002Fem>\u003C\u002Fp>\u003Cp>Your firm failed to conduct adequate investigations into OOS stability results. For example, in two separate incidents, you invalidated OOS stability results for subpotent assay without adequate scientific justification. You relied on resampling data from \u003Cstrong>(b)(4)\u003C\u002Fstrong>, lots \u003Cstrong>(b)(4)\u003C\u002Fstrong>, to invalidate the initial stability OOS result with no identified laboratory error or rationale.\u003C\u002Fp>\u003Cp>\u003Cem>Complaint Investigations\u003C\u002Fem>\u003C\u002Fp>\u003Cp>You did not adequately investigate complaints you received. For example, upon receiving complaints of product crystallization in \u003Cstrong>(b)(4)\u003C\u002Fstrong>, you concluded that this crystallization was due to “transportation and\u002For storage” during winter months. Your investigation failed to consider changes made to the formulation or the status of process validation activities for the formulation.\u003C\u002Fp>\u003Cp>In your response, you commit to reopening complaints of crystallization and discoloration of \u003Cstrong>(b)(4)\u003C\u002Fstrong> while pausing manufacturing of this product. You also commit to revising your complaint and investigation procedures, but you did not provide revised procedures. Your response also fails to perform a retrospective review of invalidated OOS results or discuss improperly invalidated results for drug products which remain on the market.\u003C\u002Fp>\u003Cp>Inadequate investigations can lead to unidentified root causes, ineffective CAPA, and recurring problems that compromise the ability to manufacture safe and effective drug products.\u003C\u002Fp>\u003Cp>In response to this letter, provide:\u003C\u002Fp>\u003Cul>\u003Cli>A comprehensive, independent assessment of your overall system for investigating deviations, discrepancies, complaints, OOS results, and failures. Provide a detailed action plan to remediate this system. Your action plan should include, but not be limited to, significant improvements in investigation competencies, scope determination, root cause evaluation, CAPA effectiveness, quality unit oversight, and written procedures. Address how your firm will ensure all phases of investigations are appropriately conducted.\u003C\u002Fli>\u003Cli>A retrospective, independent review of all invalidated failing\u002FOOS (including in-process and release\u002Fstability testing) results for U.S. products currently in the U.S. market and within expiry as of the date of this letter and a report summarizing the findings of the analysis, including the following for each OOS:\u003Cbr>o Determine whether the scientific justification and evidence relating to the invalidated failing\u002FOOS results conclusively or inconclusively demonstrates causative laboratory error.\u003Cbr>o For investigations that conclusively establish laboratory root cause, provide rationale and ensure that all other laboratory methods vulnerable to the same or similar root cause are identified for remediation.\u003Cbr>o For all failing\u002FOOS results found by the retrospective review to have an inconclusive or no root cause identified in the laboratory, include a thorough review of production (e.g., batch manufacturing records, adequacy of the manufacturing steps, suitability of equipment\u002Ffacilities, variability of raw materials, process capability, deviation history, complaint history, batch failure history). Provide a summary of potential manufacturing root causes for each investigation, and any manufacturing operation improvements.\u003C\u002Fli>\u003Cli>A comprehensive review and remediation plan for your failing\u002FOOS result investigation systems. The CAPA should include but not be limited to addressing the following:\u003Cbr>o Quality unit oversight of laboratory investigations\u003Cbr>o Identification of adverse laboratory control trends\u003Cbr>o Resolution of causes of laboratory variation\u003Cbr>o Initiation of thorough investigations of potential manufacturing causes whenever a laboratory cause cannot be conclusively identified\u003Cbr>o Adequately scoping of each investigation and its CAPA\u003Cbr>o Revised failing\u002FOOS investigation procedures with these and other remediations\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>4. Your firm failed to establish and follow an adequate written testing program designed to assess the stability characteristics of drug products and to use results of stability testing to determine appropriate storage conditions and expiration dates (21 CFR 211.166(a)).\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Your stability program was not adequate to ensure that the drug products you manufacture, maintain their identity, strength, quality, purity, and safety throughout their shelf lives. For example, your stability study for \u003Cstrong>(b)(4)\u003C\u002Fstrong> concluded that a \u003Cstrong>(b)(4)\u003C\u002Fstrong> expiration is supported at a temperature of \u003Cstrong>(b)(4)\u003C\u002Fstrong> to \u003Cstrong>(b)(4)\u003C\u002Fstrong> degrees Celsius (\u003Cstrong>(b)(4)\u003C\u002Fstrong> to \u003Cstrong>(b)(4)\u003C\u002Fstrong> degrees Fahrenheit). However, your firm labeled much wider storage conditions as \u003Cstrong>(b)(4)\u003C\u002Fstrong> to \u003Cstrong>(b)(4)\u003C\u002Fstrong> degrees Fahrenheit at the instruction of your customer, without adequate data to support the wider labeled storage conditions. We note that you reduced the range of the labeled temperature limits, but they were still outside the range of your stability data.\u003C\u002Fp>\u003Cp>In your response, you committed to revising the stability protocol for this product and placing future lots on stability. You also state that you “can no longer rely on written justifications from product owners to deviate from the general [C]GMP requirements.” Your response is inadequate in that you do not include a comprehensive review of your stability program, nor do you provide your revised stability protocol. Additionally, your response does not describe a retrospective review of batches which lack adequate stability data to support labeled expiration dates and storage conditions.\u003C\u002Fp>\u003Cp>Without the appropriate stability studies, you do not have adequate scientific evidence to support that your drug product retains its quality attributes throughout the labeled \u003Cstrong>(b)(4)\u003C\u002Fstrong> expiry period.\u003C\u002Fp>\u003Cp>In response to this letter, provide:\u003C\u002Fp>\u003Cul>\u003Cli>A comprehensive, independent assessment and CAPA plan to ensure the adequacy of your stability program. Your remediated program should include, but not be limited to:\u003Cbr>o Stability indicating methods\u003Cbr>o Stability studies for each drug product in its marketed container-closure system before distribution is permitted\u003Cbr>o An ongoing program in which representative batches of each product are added each year to the program to determine if the shelf-life claim remains valid\u003Cbr>o A detailed definition of the specific attributes to be tested at each station (timepoint)\u003Cbr>o All procedures that describe these and other elements of your remediated stability program.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>\u003Cstrong>Unapproved New Drug Violations\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Your firm’s products are drugs as defined by section 201(g)(1) of the FD&amp;C Act, 21 U.S.C. Section 321(g)(1), because they are intended for use in the diagnosis, cure, mitigation, treatment, or prevention of disease and\u002For intended to affect the structure or any function of the body.\u003C\u002Fp>\u003Cp>Examples from your product labeling that provide evidence of the intended use (as defined in 21 CFR 201.128) of these products as drugs include, but may not be limited to, the following:\u003C\u002Fp>\u003Cp>Hydro-Q Gel (hydroquinone 4%)\u003C\u002Fp>\u003Cul>\u003Cli>Indicated for the gradual bleaching of hyperpigmented skin conditions such as chloasma, melasma, freckles, senile lentigines and areas of melanin hyperpigmentation.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Plexion Shampoo (sodium sulfacetamide 9.8%)\u003C\u002Fp>\u003Cul>\u003Cli>Intended for topical application in the following scaling dermatoses: seborrheic dermatitis and seborrhea sicca (dandruff).\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Plexion Cream and Plexion Lotion (sodium sulfacetamide 9.8%, sulfur 4.8%)\u003C\u002Fp>\u003Cul>\u003Cli>Indicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Sodium Sulfacetamide 9.8% Shampoo\u003C\u002Fp>\u003Cul>\u003Cli>Intended for topical application in the following scaling dermatoses: seborrheic dermatitis and seborrhea sicca (dandruff).\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Sodium Sulfacetamide 10% Wash\u003C\u002Fp>\u003Cul>\u003Cli>Indicated for topical application in the following scaling dermatoses: seborrheic dermatitis and seborrhea sicca (dandruff). It also is indicated for the treatment of secondary bacterial infections of the skin due to organisms susceptible to sulfonamides.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Sodium Sulfacetamide 9.8% and Sulfur 4.8% Cream, Cleanser, and Lotion\u003C\u002Fp>\u003Cul>\u003Cli>Indicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Sodium Sulfacetamide 8% and Sulfur 4% Topical Suspension\u003C\u002Fp>\u003Cul>\u003Cli>Indicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Sodium Sulfacetamide 9% and Sulfur 4% Wash\u003C\u002Fp>\u003Cul>\u003Cli>Indicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Sodium Sulfacetamide 10% and Sulfur 5% Cleanser\u003C\u002Fp>\u003Cul>\u003Cli>Indicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Salicylic Acid 28.5% Solution\u003C\u002Fp>\u003Cul>\u003Cli>Indicated for the topical treatment and removal of common warts and plantar warts.\u003C\u002Fli>\u003C\u002Ful>\u003Cp>Your products are “new drugs” under section 201(p) of the FD&amp;C Act, 21 U.S.C. 321(p), because they are not generally recognized as safe and effective (GRASE) for use under the above-described conditions prescribed, recommended, or suggested in their labeling.\u003C\u002Fp>\u003Cp>With certain exceptions not applicable here, a new drug may not be introduced or delivered for introduction into interstate commerce without an approved application from FDA in effect, as described in section 505(a) of the FD&amp;C Act, 21 U.S.C. 355(a). No approved applications pursuant to section 505 of the FD&amp;C Act, 21 U.S.C. 355, are in effect for these products.\u003C\u002Fp>\u003Cp>Accordingly, these products are unapproved new drugs. The introduction or delivery for introduction into interstate commerce of these unapproved new drug products violates sections 301(d) and 505(a) of the FD&amp;C Act, 21 U.S.C. 331(d) and 355(a).\u003C\u002Fp>\u003Cp>\u003Cstrong>Responsibilities as a Contractor\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Drugs must be manufactured in conformance with CGMP. FDA is aware that many drug manufacturers use independent contractors such as production facilities, testing laboratories, packagers, and labelers. FDA regards contractors as extensions of the manufacturer.\u003C\u002Fp>\u003Cp>You and your customer \u003Cstrong>(b)(4)\u003C\u002Fstrong>, have a quality agreement regarding the manufacture of \u003Cstrong>(b)(4)\u003C\u002Fstrong>. You are responsible for the quality of drugs you produce as a contract facility regardless of agreements in place with product owners. You are required to ensure that drugs are made in accordance with section 501(a)(2)(B) of the FD&amp;C Act for safety, identity, strength, quality, and purity. See FDA’s guidance document Contract Manufacturing Arrangements for Drugs: Quality Agreements at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F86193\u002Fdownload.\u003C\u002Fp>\u003Cp>\u003Cstrong>Quality Systems\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Your firm’s quality systems are inadequate. For guidance on establishing and maintaining CGMP-compliant quality systems, see FDA’s guidances: \u003Cem>Q8(R2) Pharmaceutical Development\u003C\u002Fem> at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F71535\u002Fdownload, \u003Cem>Q9(R1) Quality Risk Management\u003C\u002Fem> at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F167721\u002Fdownload and \u003Cem>Q10 Pharmaceutical Quality System\u003C\u002Fem> at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F71553\u002Fdownload.\u003C\u002Fp>\u003Cp>\u003Cstrong>Consultant Recommended\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>Based upon the nature of the violations we identified at your firm, you should engage a consultant qualified as set forth in 21 CFR 211.34 to evaluate your operations and to assist your firm in meeting CGMP requirements. The qualified consultant should also perform a comprehensive six-system audit of your entire operation for CGMP compliance and evaluate the completion and efficacy of your corrective actions and preventive actions before you pursue resolution of your firm’s compliance status with FDA.\u003C\u002Fp>\u003Cp>\u003Cstrong>Conclusion\u003C\u002Fstrong>\u003C\u002Fp>\u003Cp>The violations cited in this letter are not intended to be an all-inclusive list of violations that exist at your facility. You are responsible for investigating and determining the causes of any violations and for preventing their recurrence or the occurrence of other violations.\u003C\u002Fp>\u003Cp>Correct any violations promptly. Failure to promptly and adequately address this matter may result in regulatory or legal action without further notice including, without limitation, seizure and injunction. Unresolved violations may also prevent other Federal agencies from awarding contracts.\u003C\u002Fp>\u003Cp>Failure to address violations may also cause FDA to withhold issuance of Export Certificates. FDA may withhold approval of new applications or supplements listing your firm as a drug manufacturer until any violations are completely addressed and we confirm your compliance with CGMP. We may re-inspect to verify that you have completed corrective actions to address any violations.\u003C\u002Fp>\u003Cp>FDA requests that you contact CDER's Drug Shortages Staff immediately at drugshortages@fda.hhs.gov so that we can work with you to meet any obligations you may have to report discontinuances or interruptions in your drug manufacture, as required under 21 U.S.C.§ 356c(a), and to allow FDA to consider, as soon as possible, what actions, if any, may be needed to avoid shortages and protect the health of patients who use your products.\u003C\u002Fp>\u003Cp>This letter notifies you of our findings and provides you an opportunity to address the above deficiencies. After you receive this letter, respond to this office in writing within 15 working days\u003Cem>\u003Cstrong>\u003Csup>1\u003C\u002Fsup>\u003C\u002Fstrong>\u003C\u002Fem>. Specify what you have done to address any violations and to prevent their recurrence. In response to this letter, you may provide additional information for our consideration as we continue to assess your activities and practices. If you cannot complete corrective actions within 15 working days, state your reasons for delay and your schedule for completion.\u003C\u002Fp>\u003Cp>Send your electronic reply to CDER-OC-OMQ-Communications@fda.hhs.gov. Identify your response with FEI 2513595 and ATTN: Andrew Haack.\u003C\u002Fp>\u003Cp>Sincerely,\u003Cbr>\u002FS\u002F\u003C\u002Fp>\u003Cp>Francis Godwin\u003Cbr>Director\u003Cbr>Office of Manufacturing Quality\u003Cbr>Office of Compliance\u003Cbr>Center for Drug Evaluation and Research\u003C\u002Fp>\u003Cp>\u002FS\u002F\u003C\u002Fp>\u003Cp>Tina Smith\u003Cbr>Captain, U.S. Public Health Service\u003Cbr>Director\u003Cbr>Office of Unapproved Drugs &amp; Labeling Compliance\u003Cbr>Office of Compliance\u003Cbr>Center for Drug Evaluation and Research\u003C\u002Fp>\u003Cp>_________________\u003C\u002Fp>\u003Cp>\u003Cem>\u003Cstrong>1\u003C\u002Fstrong>\u003C\u002Fem> Under program enhancements for the Generic Drug User Fee Amendments (GDUFA) reauthorization for fiscal years (FYs) 2023-2027, also known as the GDUFA III Commitment Letter, your facility may be eligible for a Post-Warning Letter Meeting to obtain preliminary feedback from FDA on the adequacy and completeness of your corrective action plans.\u003C\u002Fp>\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nVIA UPS\n\nProduct:\n\nDrugs\n\nRecipient:\n\nRecipient Name\n\nMr. Elliot Stone\n\nRecipient Title\n\nPresident\u002FCEO\n\nMedical Products Laboratories, Inc.\n\n9990 Global Road\n\nPhiladelphia, PA 19115\n\nUnited States\n\nIssuing Office:\n\nCenter for Drug Evaluation and Research (CDER)\n\nUnited States\n\nWarning Letter 320-26-61\nApril 9, 2026\nDear Mr. Stone:\nThe United States Food and Drug Administration (FDA) inspected your drug manufacturing facility, Medical Products Laboratories, Inc., FEI 2513595, at 9990 Global Road, Philadelphia, from September 29 to October 16, 2025.\nThis warning letter summarizes significant violations of Current Good Manufacturing Practice (CGMP) regulations for finished pharmaceuticals. See Title 21 Code of Federal Regulations (CFR), parts 210 and 211 (21 CFR parts 210 and 211).\nBecause your methods, facilities, or controls for manufacturing, processing, packing, or holding do not conform to CGMP, your drug products are adulterated within the meaning of section 501(a)(2)(B) of the Federal Food, Drug, and Cosmetic Act (FD&C Act), 21 U.S.C. 351(a)(2)(B).\nYour firm manufactures and is responsible for introducing or delivering for introduction into interstate commerce in the United States products that are unapproved new drugs in violation of sections 301(d) and 505(a) of the FD&C Act, 21 U.S.C. Sections 331(d) and 355(a), including but not limited to: Hydro-Q 4% Gel (hydroquinone 4%); Sodium Sulfacetamide 8% and Sulfur 4% Topical Suspension; Sodium Sulfacetamide 9% and Sulfur 4% Wash; Sodium Sulfacetamide 9.8% Shampoo; Sodium Sulfacetamide 9.8% and Sulfur 4.8% Cleanser; Sodium Sulfacetamide 9.8% and Sulfur 4.8% Lotion; Sodium Sulfacetamide 9.8% and Sulfur 4.8% Cream; Sodium Sulfacetamide 10% and Sulfur 5% Cleanser; Sodium Sulfacetamide 10% Wash; Salicylic Acid 28.5% Solution; Plexion Shampoo (sodium sulfacetamide 9.8%); Plexion Lotion (sodium sulfacetamide 9.8% and sulfur 4.8%), Plexion Cream (sodium sulfacetamide 9.8% and sulfur 4.8%) as prescription drug products. Based on our review, these products are unapproved new drugs under section 505(a) of the FD&C Act, 21 U.S.C. Section 355(a). As explained further below, introducing or delivering these products for introduction into interstate commerce violates sections 301(d) and 505(a) of the FD&C Act, 21 U.S.C. Sections 331(d) and 355(a).\nWe reviewed your November 6, 2025 response to our Form FDA 483 in detail and acknowledge receipt of your subsequent correspondence.\nDuring our inspection, our investigators observed specific violations including, but not limited to, the following.\nCGMP Violations\n1. Your firm failed to establish and follow appropriate written procedures, designed to prevent objectionable microorganisms in drug products not required to be sterile (21 CFR 211.113(a)).\nMicrobiological Results in Finished Drug Product and (b)(4) Samples\nYour firm manufactures prescription and over-the-counter (OTC) drug products for (b)(4) administration. You failed to adequately establish and follow procedures to prevent contamination with objectionable microorganisms. For example, you used an unvalidated (b)(4) treatment protocol on filled drug product batches in an attempt to reduce microbiological content. Your laboratory reported gross microbiological contamination on plates for both total aerobic microbiological count (TAMC) and total yeast and mold count (TYMC) tests in the following non-sterile finished drug products for (b)(4) administration:\n(b)(4) lot (b)(4) (TAMC: too numerous to count (TNTC) and TYMC: TNTC)\n(b)(4) lot (b)(4) (TAMC: TNTC and TYMC: TNTC)\n(b)(4) lot (b)(4) (TAMC: TNTC and TYMC: (b)(4) colony forming units (CFU) per gram)\nYour investigation of the failing results in (b)(4) lot (b)(4) concluded that contamination was from the (b)(4) component, recovered from a mixture of this component with (b)(4). However, your investigation failed to consider out-of-limit (OOL) microbiological recoveries from your (b)(4) system.\nYou subsequently released drug products based on results from (b)(4) treatment resampling. Your corrective action and preventive action (CAPA) in response to the microbiological contamination included revising the drug product formulation to increase (b)(4) content. (b)(4) are not a substitute for a comprehensive approach to preventing objectionable microorganisms from contaminating your drug products and cannot be relied on to reduce in-process bioburden during manufacturing.\nWe note that on (b)(4), you issued a voluntary recall of (b)(4), lots (b)(4), due to microbiological contamination.\nYour response commits to revising your procedures to no longer allow (b)(4) treatment to rework batches after failing microbiological results and to place a reworked batch on real-time stability. You also include a risk assessment which concludes there is no health risk for two failing lots. Your response is inadequate in that your risk assessment does not extend to all drug products where (b)(4) treatment was attempted, nor does your response provide your plans for addressing product quality and patient safety risks for lots on which you used (b)(4) treatment or product you released after failing microbiological results. Moreover, your response does not address whether additional bacterial species were present, nor did you provide evidence supporting your claims that growth on total yeast and mold plates was solely bacterial.\nThis adverse pattern of microbiological contamination in your drug products demonstrates a significant failure to adhere to CGMP. Unresolved manufacturing and quality problems can pose a significant hazard to patients.\nIn response to this letter, provide:\nA comprehensive, independent assessment of the design and control of your firm’s manufacturing operations, with a detailed and thorough review of all microbiological hazards.\nA detailed risk assessment addressing the hazards posed by distributing drug products with potentially objectionable contamination. Specify actions you will take in response to the risk assessment, such as customer notifications and product recalls.\nComplete investigations into all batches with potential objectionable microbiological contamination or a failing microbiological result (whether or not later invalidated). The investigations should detail your findings regarding the root causes of the contamination.\nAppropriate microbiological batch release specifications (i.e., total counts, identification of bioburden to detect objectionable microbes) for each of your drug products.\nA summary of results from testing retain samples of all drug product batches of which you have received failing, out-of-specification (OOS), OOL or out-of-trend (OOT) microbiological test results. Also provide test results of retains during periods when your (b)(4) system was not operating under a state of control. You should test microbiological quality (total counts and identification of bioburden to detect any objectionable microbes) of each batch. If testing yields any failing, OOS or OOL result, indicate the corrective actions you will take, including notifying customers and initiating recalls.\nA comprehensive remediation plan for the design, control, and maintenance of the (b)(4) system.\no Provide a comprehensive evaluation of vulnerabilities of (b)(4) system design and control, and summarize all deficiencies found in the system. The summary should, at minimum, describe various system characteristics that were assessed for adequacy (system temperature, materials of construction, slope, any identified dead-legs, any stagnant locations, any unsanitary fittings, flow velocity, etc.)\nYour total microbiological count limits to monitor whether this system is producing (b)(4) suitable for the intended uses for each of your products.\nA detailed risk assessment addressing the potential effects of the observed (b)(4) system failures on the quality of all drug product lots currently within expiry. Specify actions that you will take in response to the risk assessment, such as customer notifications and product recalls.\n2. Your firm failed to establish adequate written procedures for production and process control designed to assure that the drug products you manufacture have the identity, strength, quality, and purity they purport or are represented to possess (21 CFR 211.100(a)).\nYou failed to adequately validate your manufacturing processes to demonstrate that your processes are reproducible and controlled to consistently yield drug products of uniform character and quality. For example, you used a process qualification study performed at a different facility to manufacture and release (b)(4). You could not provide evidence your processes (e.g. equipment, components, and manufacturing conditions) were comparable between your facility and the site where initial process validation was performed.\nAdditionally, you failed to adequately validate your process for manufacturing (b)(4). While a process validation study for this product had been initiated, it included insufficient data. At the direction of your customer, you discontinued your efforts to complete process validation for this product, yet you continued manufacturing batches for commercial distribution.\nIn your response, you discuss a retrospective review of (b)(4) batches within expiry. You also indicate that you have paused production of (b)(4) until process validation activities can be completed. You also state that you have updated your process validation procedure and that you have verified that process validation studies have been conducted for drug products you manufacture. Your response is inadequate in that you did not evaluate the implications of changes made to product formulations for drug products that you manufacture.\nProcess validation evaluates the soundness of design and state of control of a process throughout its lifecycle. Each significant stage of a manufacturing process must be designed appropriately and assure the quality of raw material inputs, in-process materials, and finished drugs. Process qualification studies include intensive monitoring and testing throughout each significant process stage to characterize intra-batch variation and evaluate batches to determine whether an initial state of control has been established.\nSuccessful process qualification studies are necessary before commercial distribution. Thereafter, ongoing vigilant oversight of process performance and product quality is necessary to ensure you maintain a stable manufacturing operation throughout the product lifecycle.\nIn response to this letter, provide:\nA detailed summary of your validation program for ensuring a state of control throughout the product lifecycle, along with associated procedures. Describe your program for process performance qualification (PPQ), and ongoing monitoring of both intra-batch and inter-batch variation to ensure a continuing state of control.\nA timeline for performing appropriate PPQ for each of your marketed drug products which lack appropriate studies. Also include an explanation how you will ensure proper satisfactory PPQ studies are performed prior to future distribution of any drug products.\nA risk assessment for the distributed drug products produced without performing any process validation studies or using inadequately validated processes.\nProcess performance protocol(s), and written procedures for qualification of equipment and facilities.\nA detailed program, including your procedure, for designing, validating, maintaining, controlling and monitoring each of your manufacturing processes that includes vigilant monitoring of intra-batch and inter-batch variation to ensure an ongoing state of control. Also, include your program for qualification of your equipment and facility.\n3. Your firm failed to thoroughly investigate any unexplained discrepancy or failure of a batch or any of its components to meet any of its specifications, whether or not the batch has already been distributed (21 CFR 211.192).\nFinished Drug Product Microbiological Testing\nYour firm failed to adequately investigate failing microbiological results in finished products. For example, your (b)(4) lot (b)(4) obtained a failing result of (b)(4) CFU\u002Fg for TYMC (specification ≤(b)(4) CFU\u002Fg). After your contract testing laboratory failed to identify the fungal species, you concluded, without evidence, that contamination occurred “during handling, transportation and\u002For testing.” You invalidated this failing result based on results of resampling and released the lot.\nMicrobiological contamination may not be uniformly distributed. A product sample may not be representative of the type or level of contamination within the batch. Further, testing the final product for microbiological contamination does not ensure that you have appropriate controls in place to ensure product quality. As a manufacturer, you have a responsibility to fully investigate unexplained discrepancies, deviations, and failures to assess their impact on product quality.\nStability Assay\nYour firm failed to conduct adequate investigations into OOS stability results. For example, in two separate incidents, you invalidated OOS stability results for subpotent assay without adequate scientific justification. You relied on resampling data from (b)(4), lots (b)(4), to invalidate the initial stability OOS result with no identified laboratory error or rationale.\nComplaint Investigations\nYou did not adequately investigate complaints you received. For example, upon receiving complaints of product crystallization in (b)(4), you concluded that this crystallization was due to “transportation and\u002For storage” during winter months. Your investigation failed to consider changes made to the formulation or the status of process validation activities for the formulation.\nIn your response, you commit to reopening complaints of crystallization and discoloration of (b)(4) while pausing manufacturing of this product. You also commit to revising your complaint and investigation procedures, but you did not provide revised procedures. Your response also fails to perform a retrospective review of invalidated OOS results or discuss improperly invalidated results for drug products which remain on the market.\nInadequate investigations can lead to unidentified root causes, ineffective CAPA, and recurring problems that compromise the ability to manufacture safe and effective drug products.\nIn response to this letter, provide:\nA comprehensive, independent assessment of your overall system for investigating deviations, discrepancies, complaints, OOS results, and failures. Provide a detailed action plan to remediate this system. Your action plan should include, but not be limited to, significant improvements in investigation competencies, scope determination, root cause evaluation, CAPA effectiveness, quality unit oversight, and written procedures. Address how your firm will ensure all phases of investigations are appropriately conducted.\nA retrospective, independent review of all invalidated failing\u002FOOS (including in-process and release\u002Fstability testing) results for U.S. products currently in the U.S. market and within expiry as of the date of this letter and a report summarizing the findings of the analysis, including the following for each OOS:\no Determine whether the scientific justification and evidence relating to the invalidated failing\u002FOOS results conclusively or inconclusively demonstrates causative laboratory error.\no For investigations that conclusively establish laboratory root cause, provide rationale and ensure that all other laboratory methods vulnerable to the same or similar root cause are identified for remediation.\no For all failing\u002FOOS results found by the retrospective review to have an inconclusive or no root cause identified in the laboratory, include a thorough review of production (e.g., batch manufacturing records, adequacy of the manufacturing steps, suitability of equipment\u002Ffacilities, variability of raw materials, process capability, deviation history, complaint history, batch failure history). Provide a summary of potential manufacturing root causes for each investigation, and any manufacturing operation improvements.\nA comprehensive review and remediation plan for your failing\u002FOOS result investigation systems. The CAPA should include but not be limited to addressing the following:\no Quality unit oversight of laboratory investigations\no Identification of adverse laboratory control trends\no Resolution of causes of laboratory variation\no Initiation of thorough investigations of potential manufacturing causes whenever a laboratory cause cannot be conclusively identified\no Adequately scoping of each investigation and its CAPA\no Revised failing\u002FOOS investigation procedures with these and other remediations\n4. Your firm failed to establish and follow an adequate written testing program designed to assess the stability characteristics of drug products and to use results of stability testing to determine appropriate storage conditions and expiration dates (21 CFR 211.166(a)).\nYour stability program was not adequate to ensure that the drug products you manufacture, maintain their identity, strength, quality, purity, and safety throughout their shelf lives. For example, your stability study for (b)(4) concluded that a (b)(4) expiration is supported at a temperature of (b)(4) to (b)(4) degrees Celsius ((b)(4) to (b)(4) degrees Fahrenheit). However, your firm labeled much wider storage conditions as (b)(4) to (b)(4) degrees Fahrenheit at the instruction of your customer, without adequate data to support the wider labeled storage conditions. We note that you reduced the range of the labeled temperature limits, but they were still outside the range of your stability data.\nIn your response, you committed to revising the stability protocol for this product and placing future lots on stability. You also state that you “can no longer rely on written justifications from product owners to deviate from the general [C]GMP requirements.” Your response is inadequate in that you do not include a comprehensive review of your stability program, nor do you provide your revised stability protocol. Additionally, your response does not describe a retrospective review of batches which lack adequate stability data to support labeled expiration dates and storage conditions.\nWithout the appropriate stability studies, you do not have adequate scientific evidence to support that your drug product retains its quality attributes throughout the labeled (b)(4) expiry period.\nIn response to this letter, provide:\nA comprehensive, independent assessment and CAPA plan to ensure the adequacy of your stability program. Your remediated program should include, but not be limited to:\no Stability indicating methods\no Stability studies for each drug product in its marketed container-closure system before distribution is permitted\no An ongoing program in which representative batches of each product are added each year to the program to determine if the shelf-life claim remains valid\no A detailed definition of the specific attributes to be tested at each station (timepoint)\no All procedures that describe these and other elements of your remediated stability program.\nUnapproved New Drug Violations\nYour firm’s products are drugs as defined by section 201(g)(1) of the FD&C Act, 21 U.S.C. Section 321(g)(1), because they are intended for use in the diagnosis, cure, mitigation, treatment, or prevention of disease and\u002For intended to affect the structure or any function of the body.\nExamples from your product labeling that provide evidence of the intended use (as defined in 21 CFR 201.128) of these products as drugs include, but may not be limited to, the following:\nHydro-Q Gel (hydroquinone 4%)\nIndicated for the gradual bleaching of hyperpigmented skin conditions such as chloasma, melasma, freckles, senile lentigines and areas of melanin hyperpigmentation.\nPlexion Shampoo (sodium sulfacetamide 9.8%)\nIntended for topical application in the following scaling dermatoses: seborrheic dermatitis and seborrhea sicca (dandruff).\nPlexion Cream and Plexion Lotion (sodium sulfacetamide 9.8%, sulfur 4.8%)\nIndicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.\nSodium Sulfacetamide 9.8% Shampoo\nIntended for topical application in the following scaling dermatoses: seborrheic dermatitis and seborrhea sicca (dandruff).\nSodium Sulfacetamide 10% Wash\nIndicated for topical application in the following scaling dermatoses: seborrheic dermatitis and seborrhea sicca (dandruff). It also is indicated for the treatment of secondary bacterial infections of the skin due to organisms susceptible to sulfonamides.\nSodium Sulfacetamide 9.8% and Sulfur 4.8% Cream, Cleanser, and Lotion\nIndicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.\nSodium Sulfacetamide 8% and Sulfur 4% Topical Suspension\nIndicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.\nSodium Sulfacetamide 9% and Sulfur 4% Wash\nIndicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.\nSodium Sulfacetamide 10% and Sulfur 5% Cleanser\nIndicated for use in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.\nSalicylic Acid 28.5% Solution\nIndicated for the topical treatment and removal of common warts and plantar warts.\nYour products are “new drugs” under section 201(p) of the FD&C Act, 21 U.S.C. 321(p), because they are not generally recognized as safe and effective (GRASE) for use under the above-described conditions prescribed, recommended, or suggested in their labeling.\nWith certain exceptions not applicable here, a new drug may not be introduced or delivered for introduction into interstate commerce without an approved application from FDA in effect, as described in section 505(a) of the FD&C Act, 21 U.S.C. 355(a). No approved applications pursuant to section 505 of the FD&C Act, 21 U.S.C. 355, are in effect for these products.\nAccordingly, these products are unapproved new drugs. The introduction or delivery for introduction into interstate commerce of these unapproved new drug products violates sections 301(d) and 505(a) of the FD&C Act, 21 U.S.C. 331(d) and 355(a).\nResponsibilities as a Contractor\nDrugs must be manufactured in conformance with CGMP. FDA is aware that many drug manufacturers use independent contractors such as production facilities, testing laboratories, packagers, and labelers. FDA regards contractors as extensions of the manufacturer.\nYou and your customer (b)(4), have a quality agreement regarding the manufacture of (b)(4). You are responsible for the quality of drugs you produce as a contract facility regardless of agreements in place with product owners. You are required to ensure that drugs are made in accordance with section 501(a)(2)(B) of the FD&C Act for safety, identity, strength, quality, and purity. See FDA’s guidance document Contract Manufacturing Arrangements for Drugs: Quality Agreements at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F86193\u002Fdownload.\nQuality Systems\nYour firm’s quality systems are inadequate. For guidance on establishing and maintaining CGMP-compliant quality systems, see FDA’s guidances: Q8(R2) Pharmaceutical Development at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F71535\u002Fdownload, Q9(R1) Quality Risk Management at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F167721\u002Fdownload and Q10 Pharmaceutical Quality System at https:\u002F\u002Fwww.fda.gov\u002Fmedia\u002F71553\u002Fdownload.\nConsultant Recommended\nBased upon the nature of the violations we identified at your firm, you should engage a consultant qualified as set forth in 21 CFR 211.34 to evaluate your operations and to assist your firm in meeting CGMP requirements. The qualified consultant should also perform a comprehensive six-system audit of your entire operation for CGMP compliance and evaluate the completion and efficacy of your corrective actions and preventive actions before you pursue resolution of your firm’s compliance status with FDA.\nConclusion\nThe violations cited in this letter are not intended to be an all-inclusive list of violations that exist at your facility. You are responsible for investigating and determining the causes of any violations and for preventing their recurrence or the occurrence of other violations.\nCorrect any violations promptly. Failure to promptly and adequately address this matter may result in regulatory or legal action without further notice including, without limitation, seizure and injunction. Unresolved violations may also prevent other Federal agencies from awarding contracts.\nFailure to address violations may also cause FDA to withhold issuance of Export Certificates. FDA may withhold approval of new applications or supplements listing your firm as a drug manufacturer until any violations are completely addressed and we confirm your compliance with CGMP. We may re-inspect to verify that you have completed corrective actions to address any violations.\nFDA requests that you contact CDER's Drug Shortages Staff immediately at drugshortages@fda.hhs.gov so that we can work with you to meet any obligations you may have to report discontinuances or interruptions in your drug manufacture, as required under 21 U.S.C.§ 356c(a), and to allow FDA to consider, as soon as possible, what actions, if any, may be needed to avoid shortages and protect the health of patients who use your products.\nThis letter notifies you of our findings and provides you an opportunity to address the above deficiencies. After you receive this letter, respond to this office in writing within 15 working days1. Specify what you have done to address any violations and to prevent their recurrence. In response to this letter, you may provide additional information for our consideration as we continue to assess your activities and practices. If you cannot complete corrective actions within 15 working days, state your reasons for delay and your schedule for completion.\nSend your electronic reply to CDER-OC-OMQ-Communications@fda.hhs.gov. Identify your response with FEI 2513595 and ATTN: Andrew Haack.\nSincerely,\n\u002FS\u002F\nFrancis Godwin\nDirector\nOffice of Manufacturing Quality\nOffice of Compliance\nCenter for Drug Evaluation and Research\n\u002FS\u002F\nTina Smith\nCaptain, U.S. Public Health Service\nDirector\nOffice of Unapproved Drugs & Labeling Compliance\nOffice of Compliance\nCenter for Drug Evaluation and Research\n_________________\n1 Under program enhancements for the Generic Drug User Fee Amendments (GDUFA) reauthorization for fiscal years (FYs) 2023-2027, also known as the GDUFA III Commitment Letter, your facility may be eligible for a Post-Warning Letter Meeting to obtain preliminary feedback from FDA on the adequacy and completeness of your corrective action plans.","Medical Products Laboratories, Inc.","medical-products-laboratories-inc-721916-04092026","2026-08-18T06:42:28.498414+00:00","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fmedical-products-laboratories-inc-721916-04092026","2026-10-26T08:09:23.057513+00:00","2026-04-14","721916","Drugs","Mr. Elliot Stone","2026-08-19T04:47:49.417+00:00","VIA UPS","2026-04-09",{"id":112,"raw":113,"subject":12,"body_html":118,"body_text":119,"firm_name":120,"letter_id":121,"created_at":122,"fei_number":20,"letter_url":123,"updated_at":124,"action_type":23,"case_status":48,"posted_date":125,"marcs_cms_no":126,"product_type":27,"closeout_date":20,"issuing_office":117,"recipient_name":127,"body_fetched_at":128,"delivery_method":129,"recipient_title":20,"reference_number":20,"action_taken_date":130,"medical_device_id":20,"response_letter_date":20},1356,[114,115,116,117,12,13,13,13],"\u003Ctime datetime=\"2024-07-23T13:20:00Z\">07\u002F23\u002F2024\u003C\u002Ftime>\n","\u003Ctime datetime=\"2024-07-12T04:00:00Z\">07\u002F12\u002F2024\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fcriticare-technologies-inc-686915-07122024\">Criticare Technologies, Inc.\u003C\u002Fa>","Division of Medical Device and Radiological Health Operations East","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>United Parcel Service\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Neeraj Jha\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>CEO\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Criticare Technologies, Inc.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>6901 TPC Drive, Suite 300\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Orlando\u003C\u002Fspan>, \u003Cspan>FL\u003C\u002Fspan> \u003Cspan>32822\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:neeraj@criticare.com\"> neeraj@criticare.com\u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Division of Medical Device and Radiological Health Operations East\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003Cbr>\nCMS # 686915\u003C\u002Fp>\n\n\u003Cp>July 12, 2024\u003C\u002Fp>\n\n\u003Cp>Dear Mr. Jha:\u003C\u002Fp>\n\n\u003Cp>The United States Food and Drug Administration (FDA) conducted an inspection of your firm’s medical device operations at Criticare Technologies, Inc., 333 Strawberry Field Rd Ste 11, Warwick, RI, FEI 3012238587, from March 21, 2024, through May 10, 2024. During the inspection, the FDA investigator determined that your firm is a manufacturer of patient monitors including the nGenuity patient vital signs monitor. Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\u003C\u002Fp>\n\n\u003Cp>This inspection revealed that the above devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820.\u003C\u002Fp>\n\n\u003Cp>We received your response dated June 3, 2023, from John Haefele, Vice President, and General Manager. which responded to the Form FDA 483, List of Inspectional Observations issued to your firm on May 10, 2024. We address your response below.\u003C\u002Fp>\n\n\u003Cp>Your significant violations are as follows:\u003C\u002Fp>\n\n\u003Cp>1. Failure to establish and maintain procedures for implementing corrective and preventive actions, as required by 21 CFR 820.100(a). Review of your firms Corrective and Preventive Action (CAPA) Procedure, CTI 221 rev H, revealed that it does not provide instructions in sufficient detail to; identify existing and potential causes of nonconforming product, or other quality problems; conduct investigations, identify, and take appropriate corrective or preventive actions, or verify that any such actions are effective. The below examples describe a CAPA system that does not meet the above requirements of 21 CFR.820.100(a):\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>Your firm opened CAPA 1098 on May 1, 2023, to address a nGenuity device shutting off intermittently. During the inspection, your Vice President indicated that since November 2019, your firm received 21 complaints related to these devices shutting off. One of these complaints (4932) references the device shutting off during surgery. CAPA 1098 did not include any investigation and was still open at the time of the inspection.\u003C\u002Fli>\n\t\u003Cli>Your firm opened CAPA 1033 on December 1, 2017, and CAPA 1059 on July 17, 2018, to address CO2 module issues associated with your vital sign monitors. Since January 1, 2022, your firm has received 276 complaints related to the CO2 module of the nGenuity device, including reports of check line errors, CO2 measurements not reading\u002Fdisplaying, and distorted waveforms. CAPA 1033 did not include any investigation and the investigation in CAPA 1059 was not completed. Both CAPAs were open at the time of the inspection with the last notations dated June 1, 2021.\u003C\u002Fli>\n\t\u003Cli>Your firm opened CAPA 1054 on July 17, 2018, to address SpO2 printed circuit boards assembly (PCBA) related issues with your vital sign monitors. Since January 1, 2022, your firm received 68 complaints related to the SpO2 module. CAPA 1054 did not include any investigation. This CAPA was still open at the time of the inspection with the last notation documented June 1, 2021.\u003C\u002Fli>\n\t\u003Cli>Your firm opened two CAPAs, 1046 and 1050, on August 2, 2018, to address in-process nGenuity analog printed circuit boards (PCBs) and electrocardiogram (ECG) related issues. Since January 2022, your firm received 67 complaints related to the ECG module, including false flat lines or alerts of asystole and noisy waveforms. Both CAPAs were still open at the time of the inspection, and both indicated further investigation was needed with the last notations documented June 1, 2021.\u003C\u002Fli>\n\t\u003Cli>Three CAPAs (1086, 1088, and 1090), related to purchasing, CAPAs, and acceptance activities, were all initiated on November 18, 2019, to address observations from the previous FDA inspection. All four were closed despite not having an adequate root cause investigation and no effectiveness check plan. Two CAPAs (1091 and 1094), were also opened on November 18, 2019, to address design and complaint issues from the previous inspection. Verification of the proposed corrective actions were not performed for either of these CAPAs and were still open at the time of the inspection with no activity since June 1, 2021. We observed continuing deficiencies in all these above quality systems (purchasing, CAPAs, acceptance activities, design and complaints), during our recent inspection.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>This is a repeat deficiency from our 2017 Warning Letter.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm’s response and concluded that it is not adequate. You have not provided sufficient details regarding any corrective actions, documents, or a timeline for completion to ensure these CAPA violations will be corrected at your facility.\u003C\u002Fp>\n\n\u003Cp>2. Failure to establish and maintain adequate procedures to control the design of the device in order to ensure that specified design requirements are met, as required by 21 CFR 820.30(a). Specifically, your firm has not adequately controlled and documented the design of your nGenuity devices. For example:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>Your firm has not adequately conducted a risk analysis for your nGenuity devices, as required by 21 CFR 820.30(g). Specifically, your firm provided a Hazard Analysis &amp; Management document for your nGenuity CO2 Project, dated 2007, which was a document from the company you purchased in 2015. This did not identify risks associated with distorted displays or devices shutting down unexpectedly. Since 2016, your firm received 629 complaints related to distorted displays and at least 21 complaints related to monitors shutting down unexpectedly with your nGenuity device.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>Also, the above 2007 Hazard Analysis &amp; Management document for your nGenuity CO2 Project, did not identify any hazards related to faulty internal ECG cables, which were incorporated into certain nGenuity devices after 2015. During the inspection, your Vice President &amp; General Manager stated that this section of the hazard analysis is incomplete, and a faulty internal ECG cable should be identified as another hazard.\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>Your firm has not adequately performed a design verification for your nGenuity device to confirm that the design output meets design input requirements, as required by 21 CFR 820.30(f). Specifically, the SpO2 accuracy specifications, in a document dated 2006, are defined as \u003Cstrong>(b)(4)\u003C\u002Fstrong> for the range of \u003Cstrong>(b)(4)\u003C\u002Fstrong> and \u003Cstrong>(b)(4)\u003C\u002Fstrong> for the range of \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Two Pulse \u003Cstrong>(b)(4)\u003C\u002Fstrong> Reports from 2000 and 2001 were provided during the inspection to support the above accuracy claims. However, these reports do not support the claims made for the \u003Cstrong>(b)(4)\u003C\u002Fstrong>. For example, the reports did not include acceptance criteria, a rationale for the sample size of \u003Cstrong>(b)(4)\u003C\u002Fstrong> participants, and traceability for the devices reviewed. Your firm has been relying on older design documents for your nGenuity device yet have not performed a sufficient design review to confirm the current design has been verified.\u003C\u002Fli>\n\t\u003Cli>Your firm has not adequately conducted design validation for your nGenuity devices as required by 21 CFR 820.30(g). Specifically, the 8100E Series \u003Cstrong>(b)(4)\u003C\u002Fstrong> provided during the inspection did not include acceptance criteria and did not document a rationale for the sample size of \u003Cstrong>(b)(4)\u003C\u002Fstrong> collecting \u003Cstrong>(b)(4)\u003C\u002Fstrong> on \u003Cstrong>(b)(4)\u003C\u002Fstrong> participants. Your firm has been relying on older design documents for your nGenuity device yet have not performed a sufficient design review to confirm the current device design has been validated.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>We reviewed your firm’s response and concluded that it is not adequate. You have not provided sufficient details regarding any corrective actions, documents, or a timeline for completion, to ensure these design control violations will be corrected at your facility.\u003C\u002Fp>\n\n\u003Cp>3. Failure to establish and maintain procedures to ensure that all received product conforms to specified requirements, as required by 21 CFR 820.50. For example, your firm did not have a completed supplier evaluation form for your key supplier of nGenuity SpO2, CO2, analog, and main printed circuit boards (PCBA’s), as required by your own Purchasing Process, CTI 209, Rev E. This supplier has been providing these components to your firm since 2016 yet was listed on your approved supplier list as a probationary supplier.\u003C\u002Fp>\n\n\u003Cp>We reviewed your firm’s response and concluded that it is not adequate. You have not provided sufficient details regarding any corrective actions, documents, or a timeline for completion, to ensure these purchasing control violations will be corrected at your facility.\u003C\u002Fp>\n\n\u003Cp>4. Failure to establish and maintain procedures to control product that does not conform to specified requirements, including procedures to address the identification, documentation, evaluation, segregation, and disposition of nonconforming (NC) product, as required by 21 CFR 820.90(a). For example, six out of six nonconformance reports reviewed during the inspection did not include documented investigations or dispositions, as required by your procedure. These include:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>NC 1797 dated August 4, 2022, for \u003Cstrong>(b)(4)\u003C\u002Fstrong> non-conforming SpO2 PCBs, p\u002Fn \u003Cstrong>(b)(4)\u003C\u002Fstrong>, lots \u003Cstrong>(b)(4)\u003C\u002Fstrong> and \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fli>\n\t\u003Cli>NC 1804 dated December 28, 2022, for \u003Cstrong>(b)(4)\u003C\u002Fstrong> non-conforming displays, p\u002Fn \u003Cstrong>(b)(4)\u003C\u002Fstrong>, lots \u003Cstrong>(b)(4)\u003C\u002Fstrong>, and \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fli>\n\t\u003Cli>NC 1786 dated November 8, 2023, for \u003Cstrong>(b)(4)\u003C\u002Fstrong> non-conforming \u003Cstrong>(b)(4)\u003C\u002Fstrong>, p\u002Fn \u003Cstrong>(b)(4)\u003C\u002Fstrong>, lot \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fli>\n\t\u003Cli>NC 1787 dated December 3, 2023, for \u003Cstrong>(b)(4)\u003C\u002Fstrong> non-conforming displays, p\u002Fn \u003Cstrong>(b)(4)\u003C\u002Fstrong>, lots \u003Cstrong>(b)(4)\u003C\u002Fstrong> and \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fli>\n\t\u003Cli>NC 1790, undated, for one damaged SpO2 analog ribbon cable, p\u002Fn \u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fli>\n\t\u003Cli>NC 1796, undated, for \u003Cstrong>(b)(4)\u003C\u002Fstrong> non-conforming \u003Cstrong>(b)(4)\u003C\u002Fstrong> main PCBs covering the period 2\u002F7\u002F2022 - 7\u002F21\u002F2022.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>We reviewed your firm’s response and concluded that it is not adequate. You have not provided sufficient details regarding any corrective actions, documents, or a timeline for completion, to ensure these NC violations will be corrected at your facility.\u003C\u002Fp>\n\n\u003Cp>Your firm should take prompt action to address any violations identified in this letter. Failure to adequately address this may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\u003C\u002Fp>\n\n\u003Cp>Other federal agencies may take your compliance with the FD&amp;C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\u003C\u002Fp>\n\n\u003Cp>We are requesting that you submit to this office on the schedule below, certification by an outside expert consultant that he\u002Fshe has conducted an audit of your establishment's manufacturing and quality assurance systems relative to the requirements of the device QS regulation (21 CFR, Part 820). You should also submit a copy of the consultant's report, and certification by your establishment's Chief Executive Officer (if other than yourself) that he or she has reviewed the consultant's report and that your establishment has initiated or completed all corrections called for in the report. The initial certifications of audit and corrections and subsequent certifications of updated audits and corrections (if required) should be submitted to this office by the following dates:\u003C\u002Fp>\n\n\u003Cul>\n\t\u003Cli>Initial certifications by consultant and establishment – July 31, 2025\u003C\u002Fli>\n\t\u003Cli>Subsequent certifications – July 31, 2026, and July 31, 2027\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Cp>Please notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration as part of your response.\u003C\u002Fp>\n\n\u003Cp>Your firm’s response should be sent to: Emma Schaefer, Acting Director of Compliance Branch, at oradevices1firmresponse@fda.hhs.gov. Refer to CMS # 686915 when replying. If you have any questions about the contents of this letter, please contact Compliance Officer, Karen Archdeacon at 781-587-7491 or at karen.archdeacon@fda.hhs.gov.\u003C\u002Fp>\n\n\u003Cp>Finally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\u003C\u002Fp>\n\n\u003Cp>Sincerely,\u003Cbr>\n\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>Joseph Matrisciano, Jr.\u003Cbr>\nProgram Division Director\u003Cbr>\nOffice of Medical Device and Radiological Health\u003Cbr>\nDivision 1\u003C\u002Fp>\n\n\u003Cp>Cc: Mr. Vinod Ramani, Chairman\u003Cbr>\nOpto Circuits (India) Ltd.\u003Cbr>\n#83 Electronics City, Bengaluru – 560 100, Karnataka, India\u003Cbr>\nEmail: \u003Cstrong>(b)(6)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nUnited Parcel Service\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nNeeraj Jha\n\nRecipient Title\n\nCEO\n\nCriticare Technologies, Inc.\n\n6901 TPC Drive, Suite 300\n\nOrlando, FL 32822\n\nUnited States\n\nneeraj@criticare.com\n\nIssuing Office:\n\nDivision of Medical Device and Radiological Health Operations East\n\nUnited States\n\nWARNING LETTER\n\nCMS # 686915\n\nJuly 12, 2024\n\nDear Mr. Jha:\n\nThe United States Food and Drug Administration (FDA) conducted an inspection of your firm’s medical device operations at Criticare Technologies, Inc., 333 Strawberry Field Rd Ste 11, Warwick, RI, FEI 3012238587, from March 21, 2024, through May 10, 2024. During the inspection, the FDA investigator determined that your firm is a manufacturer of patient monitors including the nGenuity patient vital signs monitor. Under section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), 21 U.S.C. § 321(h), these products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body.\n\nThis inspection revealed that the above devices are adulterated within the meaning of section 501(h) of the Act, 21 U.S.C. § 351(h), in that the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation found at Title 21, Code of Federal Regulations (CFR), Part 820.\n\nWe received your response dated June 3, 2023, from John Haefele, Vice President, and General Manager. which responded to the Form FDA 483, List of Inspectional Observations issued to your firm on May 10, 2024. We address your response below.\n\nYour significant violations are as follows:\n\n1. Failure to establish and maintain procedures for implementing corrective and preventive actions, as required by 21 CFR 820.100(a). Review of your firms Corrective and Preventive Action (CAPA) Procedure, CTI 221 rev H, revealed that it does not provide instructions in sufficient detail to; identify existing and potential causes of nonconforming product, or other quality problems; conduct investigations, identify, and take appropriate corrective or preventive actions, or verify that any such actions are effective. The below examples describe a CAPA system that does not meet the above requirements of 21 CFR.820.100(a):\n\nYour firm opened CAPA 1098 on May 1, 2023, to address a nGenuity device shutting off intermittently. During the inspection, your Vice President indicated that since November 2019, your firm received 21 complaints related to these devices shutting off. One of these complaints (4932) references the device shutting off during surgery. CAPA 1098 did not include any investigation and was still open at the time of the inspection.\n\nYour firm opened CAPA 1033 on December 1, 2017, and CAPA 1059 on July 17, 2018, to address CO2 module issues associated with your vital sign monitors. Since January 1, 2022, your firm has received 276 complaints related to the CO2 module of the nGenuity device, including reports of check line errors, CO2 measurements not reading\u002Fdisplaying, and distorted waveforms. CAPA 1033 did not include any investigation and the investigation in CAPA 1059 was not completed. Both CAPAs were open at the time of the inspection with the last notations dated June 1, 2021.\n\nYour firm opened CAPA 1054 on July 17, 2018, to address SpO2 printed circuit boards assembly (PCBA) related issues with your vital sign monitors. Since January 1, 2022, your firm received 68 complaints related to the SpO2 module. CAPA 1054 did not include any investigation. This CAPA was still open at the time of the inspection with the last notation documented June 1, 2021.\n\nYour firm opened two CAPAs, 1046 and 1050, on August 2, 2018, to address in-process nGenuity analog printed circuit boards (PCBs) and electrocardiogram (ECG) related issues. Since January 2022, your firm received 67 complaints related to the ECG module, including false flat lines or alerts of asystole and noisy waveforms. Both CAPAs were still open at the time of the inspection, and both indicated further investigation was needed with the last notations documented June 1, 2021.\n\nThree CAPAs (1086, 1088, and 1090), related to purchasing, CAPAs, and acceptance activities, were all initiated on November 18, 2019, to address observations from the previous FDA inspection. All four were closed despite not having an adequate root cause investigation and no effectiveness check plan. Two CAPAs (1091 and 1094), were also opened on November 18, 2019, to address design and complaint issues from the previous inspection. Verification of the proposed corrective actions were not performed for either of these CAPAs and were still open at the time of the inspection with no activity since June 1, 2021. We observed continuing deficiencies in all these above quality systems (purchasing, CAPAs, acceptance activities, design and complaints), during our recent inspection.\n\nThis is a repeat deficiency from our 2017 Warning Letter.\n\nWe reviewed your firm’s response and concluded that it is not adequate. You have not provided sufficient details regarding any corrective actions, documents, or a timeline for completion to ensure these CAPA violations will be corrected at your facility.\n\n2. Failure to establish and maintain adequate procedures to control the design of the device in order to ensure that specified design requirements are met, as required by 21 CFR 820.30(a). Specifically, your firm has not adequately controlled and documented the design of your nGenuity devices. For example:\n\nYour firm has not adequately conducted a risk analysis for your nGenuity devices, as required by 21 CFR 820.30(g). Specifically, your firm provided a Hazard Analysis & Management document for your nGenuity CO2 Project, dated 2007, which was a document from the company you purchased in 2015. This did not identify risks associated with distorted displays or devices shutting down unexpectedly. Since 2016, your firm received 629 complaints related to distorted displays and at least 21 complaints related to monitors shutting down unexpectedly with your nGenuity device.\n\nAlso, the above 2007 Hazard Analysis & Management document for your nGenuity CO2 Project, did not identify any hazards related to faulty internal ECG cables, which were incorporated into certain nGenuity devices after 2015. During the inspection, your Vice President & General Manager stated that this section of the hazard analysis is incomplete, and a faulty internal ECG cable should be identified as another hazard.\n\nYour firm has not adequately performed a design verification for your nGenuity device to confirm that the design output meets design input requirements, as required by 21 CFR 820.30(f). Specifically, the SpO2 accuracy specifications, in a document dated 2006, are defined as (b)(4) for the range of (b)(4) and (b)(4) for the range of (b)(4). Two Pulse (b)(4) Reports from 2000 and 2001 were provided during the inspection to support the above accuracy claims. However, these reports do not support the claims made for the (b)(4). For example, the reports did not include acceptance criteria, a rationale for the sample size of (b)(4) participants, and traceability for the devices reviewed. Your firm has been relying on older design documents for your nGenuity device yet have not performed a sufficient design review to confirm the current design has been verified.\n\nYour firm has not adequately conducted design validation for your nGenuity devices as required by 21 CFR 820.30(g). Specifically, the 8100E Series (b)(4) provided during the inspection did not include acceptance criteria and did not document a rationale for the sample size of (b)(4) collecting (b)(4) on (b)(4) participants. Your firm has been relying on older design documents for your nGenuity device yet have not performed a sufficient design review to confirm the current device design has been validated.\n\nWe reviewed your firm’s response and concluded that it is not adequate. You have not provided sufficient details regarding any corrective actions, documents, or a timeline for completion, to ensure these design control violations will be corrected at your facility.\n\n3. Failure to establish and maintain procedures to ensure that all received product conforms to specified requirements, as required by 21 CFR 820.50. For example, your firm did not have a completed supplier evaluation form for your key supplier of nGenuity SpO2, CO2, analog, and main printed circuit boards (PCBA’s), as required by your own Purchasing Process, CTI 209, Rev E. This supplier has been providing these components to your firm since 2016 yet was listed on your approved supplier list as a probationary supplier.\n\nWe reviewed your firm’s response and concluded that it is not adequate. You have not provided sufficient details regarding any corrective actions, documents, or a timeline for completion, to ensure these purchasing control violations will be corrected at your facility.\n\n4. Failure to establish and maintain procedures to control product that does not conform to specified requirements, including procedures to address the identification, documentation, evaluation, segregation, and disposition of nonconforming (NC) product, as required by 21 CFR 820.90(a). For example, six out of six nonconformance reports reviewed during the inspection did not include documented investigations or dispositions, as required by your procedure. These include:\n\nNC 1797 dated August 4, 2022, for (b)(4) non-conforming SpO2 PCBs, p\u002Fn (b)(4), lots (b)(4) and (b)(4).\n\nNC 1804 dated December 28, 2022, for (b)(4) non-conforming displays, p\u002Fn (b)(4), lots (b)(4), and (b)(4).\n\nNC 1786 dated November 8, 2023, for (b)(4) non-conforming (b)(4), p\u002Fn (b)(4), lot (b)(4).\n\nNC 1787 dated December 3, 2023, for (b)(4) non-conforming displays, p\u002Fn (b)(4), lots (b)(4) and (b)(4).\n\nNC 1790, undated, for one damaged SpO2 analog ribbon cable, p\u002Fn (b)(4)\n\nNC 1796, undated, for (b)(4) non-conforming (b)(4) main PCBs covering the period 2\u002F7\u002F2022 - 7\u002F21\u002F2022.\n\nWe reviewed your firm’s response and concluded that it is not adequate. You have not provided sufficient details regarding any corrective actions, documents, or a timeline for completion, to ensure these NC violations will be corrected at your facility.\n\nYour firm should take prompt action to address any violations identified in this letter. Failure to adequately address this may result in regulatory action being initiated by the FDA without further notice. These actions include, but are not limited to, seizure, injunction, and civil money penalties.\n\nOther federal agencies may take your compliance with the FD&C Act and its implementing regulations into account when considering the award of federal contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been addressed. Should FDA determine that your devices or facilities do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\n\nWe are requesting that you submit to this office on the schedule below, certification by an outside expert consultant that he\u002Fshe has conducted an audit of your establishment's manufacturing and quality assurance systems relative to the requirements of the device QS regulation (21 CFR, Part 820). You should also submit a copy of the consultant's report, and certification by your establishment's Chief Executive Officer (if other than yourself) that he or she has reviewed the consultant's report and that your establishment has initiated or completed all corrections called for in the report. The initial certifications of audit and corrections and subsequent certifications of updated audits and corrections (if required) should be submitted to this office by the following dates:\n\nInitial certifications by consultant and establishment – July 31, 2025\n\nSubsequent certifications – July 31, 2026, and July 31, 2027\n\nPlease notify this office in writing within fifteen business days from the date you receive this letter of the specific steps your firm has taken to address the noted violations, as well as an explanation of how your firm plans to prevent these violations, or similar violations, from occurring again. Include documentation of the corrections and\u002For corrective actions (which must address systemic problems) that your firm has taken. If your firm’s planned corrections and\u002For corrective actions will occur over time, please include a timetable for implementation of those activities. If corrections and\u002For corrective actions cannot be completed within fifteen business days, state the reason for the delay and the time within which these activities will be completed. Your firm’s response should be comprehensive and address any violations included in this Warning Letter. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration as part of your response.\n\nYour firm’s response should be sent to: Emma Schaefer, Acting Director of Compliance Branch, at oradevices1firmresponse@fda.hhs.gov. Refer to CMS # 686915 when replying. If you have any questions about the contents of this letter, please contact Compliance Officer, Karen Archdeacon at 781-587-7491 or at karen.archdeacon@fda.hhs.gov.\n\nFinally, you should know that this letter is not intended to be an all-inclusive list of the violations at your firm’s facility. It is your firm’s responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, FDA 483, issued at the close of the inspection may be symptomatic of serious problems in your firm’s manufacturing and quality management systems. Your firm should investigate and determine the causes of any violations and take prompt actions to address any violations and bring the products into compliance.\n\nSincerely,\n\n\u002FS\u002F\n\nJoseph Matrisciano, Jr.\n\nProgram Division Director\n\nOffice of Medical Device and Radiological Health\n\nDivision 1\n\nCc: Mr. Vinod Ramani, Chairman\n\nOpto Circuits (India) Ltd.\n\n#83 Electronics City, Bengaluru – 560 100, Karnataka, India\n\nEmail: (b)(6)","Criticare Technologies, Inc.","criticare-technologies-inc-686915-07122024","2026-08-18T06:42:28.856152+00:00","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fcriticare-technologies-inc-686915-07122024","2026-10-26T08:08:19.255848+00:00","2024-07-23","686915","Neeraj Jha","2026-08-19T23:56:30.744+00:00","United Parcel Service","2024-07-12",{"id":132,"raw":133,"subject":12,"body_html":138,"body_text":139,"firm_name":140,"letter_id":141,"created_at":142,"fei_number":20,"letter_url":143,"updated_at":144,"action_type":23,"case_status":48,"posted_date":145,"marcs_cms_no":146,"product_type":27,"closeout_date":20,"issuing_office":137,"recipient_name":147,"body_fetched_at":148,"delivery_method":149,"recipient_title":20,"reference_number":20,"action_taken_date":150,"medical_device_id":20,"response_letter_date":20},2979,[134,135,136,137,12,13,13,13],"\u003Ctime datetime=\"2021-12-14T14:20:00Z\">12\u002F14\u002F2021\u003C\u002Ftime>\n","\u003Ctime datetime=\"2021-11-30T05:00:00Z\">11\u002F30\u002F2021\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fdental-technologies-inc-612599-11302021\">Dental Technologies Inc.\u003C\u002Fa>","Division of Pharmaceutical Quality Operations III","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n  \u003Chr>\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n              \u003Cdt>Delivery Method:\u003C\u002Fdt> \n        \u003Cdd>UPS\n                                                                                                                                                                                                                                                                                                                                                                                                                              \u003C\u002Fdd>\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Medical Devices                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>Mr. Stephen A. Erickson\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>President and Co-Owner\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Dental Technologies Inc.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>6901 N. Hamlin Avenue\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Lincolnwood\u003C\u002Fspan>, \u003Cspan>IL\u003C\u002Fspan> \u003Cspan>60712\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Division of Pharmaceutical Quality Operations III\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003Cbr>\nWL # 612599\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>November 30, 2021\u003C\u002Fp>\n\n\u003Cp>\u003Cbr>\nDear Mr. Erickson:\u003C\u002Fp>\n\n\u003Cp>The U.S. Food and Drug Administration (FDA) inspected your drug and medical device manufacturing facility, Dental Technologies Inc., FEI 1413475, at 6901 N. Hamlin Avenue, Lincolnwood, Illinois from December 7, 2020, to January 20, 2021.\u003C\u002Fp>\n\n\u003Cp>This warning letter summarizes significant violations of Current Good Manufacturing Practice (CGMP) regulations for finished pharmaceuticals and Quality System (QS) regulations for medical devices. See Title 21 Code of Federal Regulations (CFR), parts 210 and 211 (21 CFR parts 210 and 211) and Title 21 CFR, part 820, respectively.\u003C\u002Fp>\n\n\u003Cp>Because your methods, facilities, or controls for manufacturing, processing, packing, or holding do not conform to CGMP, your drug products are adulterated within the meaning of section 501(a)(2)(B) of the Federal Food, Drug, and Cosmetic Act (FD&amp;C Act), 21 U.S.C. 351(a)(2)(B).\u003C\u002Fp>\n\n\u003Cp>Additionally, your drug product, Paroex 0.12% chlorhexidine oral rinse, is adulterated under section 501(a)(2)(A) of the FD&amp;C Act, 21 U.S.C. 351(a)(2)(A), in that a substance was prepared, packed, or held under insanitary conditions, whereby it may have become contaminated with filth and rendered injurious to health.\u003C\u002Fp>\n\n\u003Cp>Under section 201(h) of the FD&amp;C Act, 21 U.S.C. § 321(h), G•U•M® HYDRAL™ OTC products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body. The HYDRAL™ OTC products are intended for treatment of Xerostomia\u002Fdry mouth.\u003C\u002Fp>\n\n\u003Cp>This inspection also revealed that your devices are adulterated within the meaning of section 501(h) of the FD&amp;C Act, 21 U.S.C. § 351(h) because the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>Drug CGMP Violations\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>We reviewed your February 10, 2021, response to our Form FDA 483 in detail and acknowledge receipt of your subsequent correspondence. Your response is inadequate because it did not provide sufficient detail or evidence of corrective actions to bring your operations into compliance with CGMP.\u003C\u002Fp>\n\n\u003Cp>During our inspection, our investigators observed specific violations including, but not limited to, the following.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>1. Your firm failed to thoroughly investigate any unexplained discrepancy or failure of a batch or any of its components to meet any of its specifications, whether or not the batch has already been distributed (21 CFR 211.192).\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>You lack adequate investigations into failing microbiological results for both finished drug products and components.\u003C\u002Fp>\n\n\u003Cp>A. In October 2020, your third-party laboratory identified \u003Cem>Burkholderia cepacia\u003C\u002Fem> complex (BCC), specifically \u003Cem>Burkholderia lata\u003C\u002Fem> in Paroex 0.12% chlorhexidine oral rinse. Until prompted by FDA, your investigation failed to adequately evaluate excessive aerobic plate counts (including too numerous to count (TNTC)) and past BCC contamination events at your facility. Your investigation did not adequately address multiple potential root causes of the contamination. For example, we noted that your cleaning program was deficient. Notably, a lack of cleaning competency extended to multiple products made at your facility, and in one instance cleaning procedures had to be repeated two or more times to assure their efficacy.\u003C\u002Fp>\n\n\u003Cp>You failed to implement systemic corrective actions and preventive actions (CAPA) and investigate additional lots that may have been affected.\u003C\u002Fp>\n\n\u003Cp>Your firm’s response, which includes your firm’s updated investigation, was inadequate.\u003C\u002Fp>\n\n\u003Cp>• Your investigation did not sufficiently address the TNTC levels of microorganisms in numerous Paroex batch retain samples, including the inability of the formulation to exert any meaningful inhibitory effect on microbial growth in your product.\u003C\u002Fp>\n\n\u003Cp>• Your investigation did not adequately explain the extreme variability of results within batches, including TNTC and passing results obtained from testing of multiple retain samples from the same batch. Also, you did not adequately describe how your future sampling strategy will be improved to provide better understanding of \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fp>\n\n\u003Cp>• You identified the chlorhexidine gluconate active pharmaceutical ingredient (API) as the most likely root cause of the Paroex contamination, but your investigation lacked justification for this assertion. For example:\u003Cbr>\n&nbsp; &nbsp; o The investigation indicated the API supplier found \u003Cem>Serratia marcescens\u003C\u002Fem> in certain lots of their chlorhexidine gluconate API, and this caused it to be the likely source of the BCC contamination. However, you noted the API supplier, \u003Cstrong>(b)(4)\u003C\u002Fstrong>, recalled affected lots contaminated with \u003Cem>Serratia marcescens\u003C\u002Fem> and your API lots met microbiological specifications. Further, your investigation lacks any indication that BCC had been isolated during chlorhexidine gluconate testing by either your supplier or your laboratory.\u003Cbr>\n&nbsp; &nbsp; o The investigation failed to address that, in addition to the lack of data indicating the presence of BCC in your API, BCC is very different from \u003Cem>Serratia marcescens\u003C\u002Fem> as they are in different taxonomic classes and have significantly different phenotypic and genotypic characteristics.\u003C\u002Fp>\n\n\u003Cp>• Your response states your Paroex 0.12% chlorhexidine gluconate oral rinse release testing did not detect \u003Cem>Burkholderia lata\u003C\u002Fem> because of a low level of contamination. This conclusion is flawed since you were not testing your product for BCC at the time, and your test method was inadequate to reliably detect these microorganisms.\u003C\u002Fp>\n\n\u003Cp>• Your response states shared equipment was cleaned and sanitized before use, per your procedures. However, your response lacks evidence of traceability confirming that the \u003Cstrong>(b)(4)\u003C\u002Fstrong>, identified as a potential cause of contamination, was adequately cleaned, and sanitized before use during manufacturing.\u003C\u002Fp>\n\n\u003Cp>• Your response acknowledges that the use of ancillary equipment is not documented in your batch records. However, you failed to include systemic corrections to your batch records and documentation systems to ensure traceability of each piece of equipment used during manufacturing, including but not limited to, their use, cleaning, sanitization, calibration, and maintenance.\u003C\u002Fp>\n\n\u003Cp>• You failed to adequately explain how you will systemically remediate your investigations program to ensure investigations are thorough, root causes are appropriately identified, scope of impacted products is appropriately evaluated, and CAPAs are prompt and effective.\u003C\u002Fp>\n\n\u003Cp>The Paroex product owner released a public announcement on December 28, 2020, detailing the receipt of a significant number of adverse events (29) associated with the product. Affected patients who received Paroex 0.12% chlorhexidine oral rinse tested positive for \u003Cem>Burkholderia lata\u003C\u002Fem>. Use of the contaminated product in patients who are immunocompromised or have pre-existing respiratory conditions, including critically ill patients and patients infected with COVID-19, is especially concerning as these patients are at increased risk for serious and life-threatening infections.\u003C\u002Fp>\n\n\u003Cp>We acknowledge that batches of Paroex 0.12% chlorhexidine gluconate oral rinse bearing an expiration date from June 30 to September 30, 2022, were recalled on October 27, 2020. It was not until further discussions with FDA that the recall was extended to other potentially impacted batches of Paroex 0.12% chlorhexidine gluconate oral rinse products, \u003Cstrong>(b)(4)\u003C\u002Fstrong>, and \u003Cstrong>(b)(4)\u003C\u002Fstrong> drug products.\u003C\u002Fp>\n\n\u003Cp>In addition, FDA collected a sample of Paroex 0.12% chlorhexidine oral rinse lot C219DQ. Our testing revealed BCC contamination and failing total counts, which further demonstrated insanitary conditions (501(a)(2)(A)) at your facility.\u003C\u002Fp>\n\n\u003Cp>B. Your firm invalidated failing microbiological results obtained by your third-party laboratory during stability testing of a batch of AlphaCaine topical anesthetic gel in March 2019, without scientific justification.\u003C\u002Fp>\n\n\u003Cp>\u003Cem>Pseudomonas aeruginosa\u003C\u002Fem> was isolated from the product sample and your laboratory retested the product. Your investigation determined your test method to be unsuitable because “\u003Cstrong>(b)(4)\u003C\u002Fstrong>.” After retesting with a method your laboratory determined suitable, you obtained passing results.\u003C\u002Fp>\n\n\u003Cp>Your investigation concluded, without adequate supporting evidence, that your third-party laboratory “may have contaminated the sample,” though they indicated no laboratory error had occurred and results were reproducible. Further, although you acknowledge your original test method for AlphaCaine topical anesthetic gel was inappropriate, your investigation determined “\u003Cstrong>(b)(4)\u003C\u002Fstrong>.”\u003C\u002Fp>\n\n\u003Cp>Your firm’s response is inadequate. You failed to perform a thorough evaluation of test methods used to ensure their adequacy.\u003C\u002Fp>\n\n\u003Cp>In response to this letter, provide:\u003C\u002Fp>\n\n\u003Cp>• Your procedures describing in-process and finished product sampling and testing. Address how you will ensure samples are representative and can detect variation within a batch. Include how testing of individual samples (\u003Cstrong>(b)(4)\u003C\u002Fstrong>) will be better leveraged to evaluate uniformity throughout the process.\u003C\u002Fp>\n\n\u003Cp>• A comprehensive and independent assessment of your manufacturing processes to determine the current state of control as well as to determine if any process remediation and new validation studies are necessary. This assessment should include, but not be limited to, a study to extensively assess intra\u002Finter-batch uniformity for all appropriate attributes of your drug products.\u003C\u002Fp>\n\n\u003Cp>• A comprehensive, independent assessment of your water system design, control, and maintenance. Include a description of all areas in your water system that can be stagnant.\u003C\u002Fp>\n\n\u003Cp>• A retrospective, independent review of all batch failures, rejected batches, returned drug products, complaints, and deviations that may have been related to microbiological contamination for the last three years.\u003C\u002Fp>\n\n\u003Cp>• A comprehensive, independent assessment of your overall system for investigating deviations, discrepancies, complaints, out-of-specification (OOS) results, and failures. Provide a detailed action plan to remediate this system. Your action plan should include, but not be limited to, significant improvements in investigation competencies, scope determination, root cause evaluation, CAPA effectiveness, quality unit oversight, and written procedures. Address how your firm will ensure all phases of investigations are appropriately conducted.\u003C\u002Fp>\n\n\u003Cp>• A retrospective, independent review of all invalidated OOS results (including in-process, release, and stability testing) for products currently in the U.S. market and within expiry as of the date of this letter. Include a report summarizing the findings of the analysis, detailing the following for each OOS:\u003Cbr>\n&nbsp; &nbsp; o Determine whether the scientific justification and evidence relating to the invalidated OOS results conclusively or inconclusively demonstrate causative laboratory error.\u003Cbr>\n&nbsp; &nbsp; o For investigations that conclusively establish laboratory root cause, provide rationale, and ensure that all other laboratory methods vulnerable to the same or similar root cause are identified for remediation.\u003Cbr>\n&nbsp; &nbsp; o For all OOS results found by the retrospective review to have an inconclusive or no root cause identified in the laboratory, include a thorough review of production (e.g., batch manufacturing records, adequacy of the manufacturing steps, suitability of equipment\u002Ffacilities, variability of raw materials, process capability, deviation history, complaint history, batch failure history). Provide a summary of potential manufacturing root causes for each investigation, and any manufacturing operation improvements.\u003C\u002Fp>\n\n\u003Cp>• A comprehensive review and remediation plan for your OOS result investigation systems. The CAPA should include, but not be limited to, addressing the following:\u003Cbr>\n&nbsp; &nbsp; o Quality unit oversight of laboratory investigations\u003Cbr>\n&nbsp; &nbsp; o Identification of adverse laboratory control trends\u003Cbr>\n&nbsp; &nbsp; o Resolution of causes of laboratory variation\u003Cbr>\n&nbsp; &nbsp; o Initiation of thorough investigations of potential manufacturing causes whenever a laboratory cause cannot be conclusively identified\u003Cbr>\n&nbsp; &nbsp; o Adequately scoping of each investigation and its CAPA\u003Cbr>\n&nbsp; &nbsp; o Revised OOS investigation procedures with these and other remediations.\u003C\u002Fp>\n\n\u003Cp>• A complete assessment of documentation systems used throughout your manufacturing and laboratory operations to determine where documentation practices are insufficient. Include a detailed CAPA plan that comprehensively remediates your firm’s documentation practices to ensure you retain attributable, legible, complete, original, accurate, and contemporaneous records throughout your operation.\u003Cbr>\n\u003Cbr>\n• Documentation to confirm the identity, cleaning, and sanitization of the \u003Cstrong>(b)(4)\u003C\u002Fstrong> used in the manufacture of Paroex 0.12% chlorhexidine oral rinse, starting with lot C170FY. Specify the \u003Cstrong>(b)(4)\u003C\u002Fstrong> used in lot C170FY and each following lot.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>2. Your firm failed to establish laboratory controls that include scientifically sound and appropriate specifications, standards, sampling plans, and test procedures designed to assure that components, drug product containers, closures, in-process materials, labeling, and drug products conform to appropriate standards of identity, strength, quality, and purity (21 CFR 211.160(b)).\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Your non-sterile aqueous-based drug product specifications did not include \u003Cem>Burkholderia cepacia\u003C\u002Fem> until October 2020. In 2012, you had identified \u003Cem>Burkholderia cepacia\u003C\u002Fem> testing as a requirement for chlorhexidine in your OOS investigation #268. However, you did not update your finished product specifications to include this testing until after Paroex 0.12% chlorhexidine oral rinse manufactured at your facility was found contaminated with \u003Cem>Burkholderia cepacia\u003C\u002Fem> complex in 2020.\u003C\u002Fp>\n\n\u003Cp>Your response is inadequate. You stated that the testing protocol submitted in the Paroex 0.12% chlorhexidine oral rinse drug application did not include \u003Cem>Burkholderia cepacia\u003C\u002Fem>, and that the United States Pharmacopeia (USP) General Chapter &lt;1111&gt; lacks explicit reference to \u003Cem>Burkholderia cepacia\u003C\u002Fem> complex.\u003C\u002Fp>\n\n\u003Cp>Your response states that you “followed the guidance outlined in” USP General Chapter &lt;1111&gt;. You add that “USP &lt;1111&gt; does not require testing these products for the absence of \u003Cem>B. cepacia\u003C\u002Fem>.”\u003C\u002Fp>\n\n\u003Cp>It should be noted that USP &lt;1111&gt; states that the list of specified microbes “is not necessarily exhaustive, and for a given preparation it may be necessary to test for other microorganisms.” Per USP, “the significance of other organisms recovered should be evaluated” considering multiple factors. Finally, USP &lt;1111&gt; is an informational chapter, and does not establish “requirements” or CGMP expectations.\u003C\u002Fp>\n\n\u003Cp>It is critical that firms establish scientifically sound and appropriate specifications for total count limits and freedom from objectionable microorganisms. Release testing under CGMP may include, but not be limited to, methods found in a drug application, those found in USP test chapters, and any additional tests as per 21 CFR 211.160. While USP methods are often incorporated into the release regimen, the methods are not necessarily batch release standards and may be insufficient to fully characterize the microbiological quality of a drug. USP chapters do not focus on identification of microbes, although this is essential to detect significant opportunistic pathogens in certain products. It is also important to note that USP acknowledges non-monograph tests and acceptance criteria may be necessary in addition to tests in the individual monograph. This is because it is manifestly impossible for each USP monograph to include all potential impurities and contaminants, including microbial contamination.\u003C\u002Fp>\n\n\u003Cp>While it may be impractical for each potentially objectionable microbe to be exhaustively listed in a specification, it is important that microbial flora found in your drug products be appropriately evaluated. This evaluation should include consideration of the full spectrum of patients who could receive your products based on their intended use. Such assessments should include input from qualified staff, such as individuals with strong microbiology and clinical expertise.\u003C\u002Fp>\n\n\u003Cp>Your firm continued to release drug products without BCC testing and did not update specifications until October 2020.\u003C\u002Fp>\n\n\u003Cp>Your drugs are often used in hospital or clinical settings in which patients may have a higher vulnerability to infection with \u003Cem>Burkholderia cepacia\u003C\u002Fem> and other objectionable organisms. Detecting numbers and types of objectionable microorganisms in your drug products is critical to making appropriate batch disposition decisions.\u003C\u002Fp>\n\n\u003Cp>In response to this letter, provide:\u003C\u002Fp>\n\n\u003Cp>• A comprehensive independent assessment of your laboratory practices, procedures, methods, equipment, documentation, and analyst competencies. Based on this review, provide a detailed plan to remediate and evaluate the effectiveness of your laboratory system (including ensuring adequacy of testing functions performed by a third-party laboratory on your behalf).\u003C\u002Fp>\n\n\u003Cp>• A list of microbial specifications, including test methods, used to analyze each lot of your drug products before release to ensure they are appropriate for their intended use. Also include the formulas (ingredients; percent composition) for each drug product, and state whether you will be testing batches for BCC as part of release testing. Release testing specifications should be developed based, in part, on your formulation and validated manufacturing steps to ensure your aqueous drug products are free from BCC.\u003C\u002Fp>\n\n\u003Cp>• An action plan and timelines for conducting full microbiological testing of retain samples to determine the quality of all batches of drug product with aqueous formulations distributed to the United States that are within expiry as of the date of this letter (if not already retrospectively tested). Include a summary of all results obtained from testing retain samples from each batch within expiry. You should test microbiological quality (total counts; identification of bioburden to detect objectionable microbes) of each batch. If such testing reveals an OOS result or otherwise indicates substandard quality, take rapid corrective actions, such as notifying customers and assessment for product recalls.\u003C\u002Fp>\n\n\u003Cp>• A comprehensive, independent assessment of the design and control of your firm’s manufacturing operations, with a detailed and thorough review of all microbiological hazards and a CAPA plan that describes improvements to design and control.\u003C\u002Fp>\n\n\u003Cp>• Complete retrospective investigations into all batches with potential objectionable microbial contamination or an OOS microbiological result (whether or not later invalidated). The investigations should detail your findings regarding the root causes of the contamination.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>3. Your firm failed to establish adequate written procedures for production and process control designed to assure that the drug products you manufacture have the identity,&nbsp;strength, quality, and purity they purport or are represented to possess (21 CFR 211.100(a)).\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>You did not adequately validate the processes used to clean your non-dedicated, product-contact equipment.\u003C\u002Fp>\n\n\u003Cp>A. You observed residue on \u003Cstrong>(b)(4)\u003C\u002Fstrong> during the 0.12% chlorhexidine gluconate oral rinse cleaning validation. Although you documented the deviation, you did not identify the residue. You determined that no corrective action was necessary, and your cleaning procedures remained unchanged. You selected 0.12% chlorhexidine gluconate oral rinse for your cleaning validation study because you manufacture the drug product \u003Cstrong>(b)(4)\u003C\u002Fstrong> and claim that it represents other water-based rinses manufactured in the shared equipment.\u003C\u002Fp>\n\n\u003Cp>B. Adequate validation or verification studies are not always performed when introducing \u003Cstrong>(b)(4)\u003C\u002Fstrong> risk products (e.g., difficult to clean, low solubility) into the non-dedicated equipment. For example, you neither incorporated Oral Cleansing Gel, 1.7% hydrogen peroxide into your \u003Cstrong>(b)(4)\u003C\u002Fstrong>-based cleaning validation matrix nor performed cleaning verification to evaluate the cleanability of this new, more viscous product.\u003C\u002Fp>\n\n\u003Cp>C. A \u003Cstrong>(b)(4)\u003C\u002Fstrong> was \u003Cstrong>(b)(4)\u003C\u002Fstrong> when failing microbiological results were obtained during the 0.12% chlorhexidine gluconate oral rinse cleaning validation. Your cleaning procedures were not updated to reflect the need for this additional \u003Cstrong>(b)(4)\u003C\u002Fstrong> performed during the validation.\u003C\u002Fp>\n\n\u003Cp>D. Your cleaning validation studies do not include all product-contact manufacturing equipment, such as \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fp>\n\n\u003Cp>E. Your procedures are \u003Cstrong>(b)(4)\u003C\u002Fstrong>, lack specificity to ensure repeatability, and do not require equipment to be \u003Cstrong>(b)(4)\u003C\u002Fstrong> to ensure hard to reach areas are cleaned properly.\u003C\u002Fp>\n\n\u003Cp>Cleaning programs should be designed to ensure equipment is consistently and properly cleaned to prevent contamination. Inadequate removal of residues from product contact surfaces of non-dedicated manufacturing equipment during cleaning can lead to cross-contamination of drug products subsequently manufactured on that equipment.\u003C\u002Fp>\n\n\u003Cp>We acknowledge you updated cleaning procedures and commit to perform additional validations as needed. However, your response did not adequately assess the risk of potential cross-contamination and its effect on product quality for batches of drug product manufactured on this shared equipment.\u003C\u002Fp>\n\n\u003Cp>In response to this letter, provide:\u003C\u002Fp>\n\n\u003Cp>• A comprehensive, independent retrospective assessment of your cleaning effectiveness to evaluate the scope of cross-contamination hazards. Include the identity of residues, other manufacturing equipment that may have been improperly cleaned, and an assessment whether cross-contaminated drug products may have been released for distribution. The\u003Cbr>\nassessment should identify any inadequacies of cleaning procedures and practices and encompass each piece of manufacturing equipment used to manufacture more than one product.\u003C\u002Fp>\n\n\u003Cp>• A CAPA plan, based on the retrospective assessment of your cleaning program, that includes appropriate remediations to your cleaning processes and practices, and timelines for completion. Provide a detailed summary of vulnerabilities in your process for lifecycle management of equipment cleaning. Describe improvements to your cleaning program, including enhancements to cleaning effectiveness; improved ongoing verification of proper cleaning execution for all drug products and equipment; and all other needed remediations.\u003C\u002Fp>\n\n\u003Cp>• Appropriate improvements to your cleaning validation program, with special emphasis on incorporating conditions identified as worst-case in your drug manufacturing operation. This should include, but not be limited to, identification and evaluation of all worst-case:\u003Cbr>\n&nbsp; &nbsp; o Drugs with higher toxicities\u003Cbr>\n&nbsp; &nbsp; o Drugs with higher drug potencies\u003Cbr>\n&nbsp; &nbsp; o Drugs of lower solubility in their cleaning solvents\u003Cbr>\n&nbsp; &nbsp; o Drugs with characteristics that make them difficult to clean\u003Cbr>\n&nbsp; &nbsp; o Swabbing locations for areas that are most difficult to clean\u003Cbr>\n&nbsp; &nbsp; o Recovery studies to ensure swab sample results are reliable and meaningful\u003Cbr>\n&nbsp; &nbsp; o Maximum hold times before cleaning\u003C\u002Fp>\n\n\u003Cp>In addition, describe the steps that must be taken in your change management system before introduction of new manufacturing equipment or new product.\u003C\u002Fp>\n\n\u003Cp>• A summary of updated SOPs that ensure an appropriate program is in place for verification and validation of cleaning procedures for drug products, processes, and equipment.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>4. Your firm failed to use equipment in the manufacture, processing, packing, or holding of drug products that is of appropriate design, adequate size, and suitably located to facilitate operations for its intended use and for its cleaning and maintenance (21 CFR 211.63)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Your manufacturing equipment is not designed and maintained appropriately.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>(b)(4)\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Upon our request, you \u003Cstrong>(b)(4)\u003C\u002Fstrong> installed on \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Our investigators observed residue inside the \u003Cstrong>(b)(4)\u003C\u002Fstrong> after the equipment had been cleaned and sanitized. Also during our inspection, \u003Cem>Pseudomonas aeruginosa\u003C\u002Fem> was isolated from \u003Cstrong>(b)(4)\u003C\u002Fstrong> located on another manufacturing \u003Cstrong>(b)(4)\u003C\u002Fstrong>. \u003Cstrong>(b)(4)\u003C\u002Fstrong> are not easily cleanable (including sanitizable) and can contribute to contamination.\u003C\u002Fp>\n\n\u003Cp>Your response is inadequate.\u003C\u002Fp>\n\n\u003Cp>• You stated that \u003Cstrong>(b)(4)\u003C\u002Fstrong> would have been \u003Cstrong>(b)(4)\u003C\u002Fstrong> because it was outside the \u003Cstrong>(b)(4)\u003C\u002Fstrong> clean hold time. However, you failed to explain why these residues were present after the equipment had already been cleaned and sanitized per your validated procedure.\u003C\u002Fp>\n\n\u003Cp>• You stated that the white residue was “most likely residual \u003Cstrong>(b)(4)\u003C\u002Fstrong> from the hand sanitizer product.” However, after manufacturing the hand sanitizer, \u003Cstrong>(b)(4)\u003C\u002Fstrong> had been cleaned, sanitized, and used to make another product, hydrogen peroxide rinse, 1.5% w\u002Fw. Your response lacks evidence to support your hypothesis regarding the identity of the residues.\u003C\u002Fp>\n\n\u003Cp>• You indicated that \u003Cstrong>(b)(4)\u003C\u002Fstrong> will solve this insanitary design problem and commit to implement procedures to \u003Cstrong>(b)(4)\u003C\u002Fstrong> as part of routine cleaning. You did not provide any mitigating action until this CAPA intended to remediate the cleaning issue is implemented. You continue to manufacture and release drug products.\u003C\u002Fp>\n\n\u003Cp>\u003Cem>Backflow Prevention Systems\u003C\u002Fem>\u003C\u002Fp>\n\n\u003Cp>Your \u003Cstrong>(b)(4)\u003C\u002Fstrong> connected to \u003Cstrong>(b)(4)\u003C\u002Fstrong> lacked an effective backflow prevention system to prevent contamination of drug product from downstream equipment. Upon request by our investigators, your firm swabbed the visibly contaminated and thoroughly \u003Cstrong>(b)(4)\u003C\u002Fstrong> and \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Numerous microorganisms, including \u003Cem>Pseudomonas aeruginosa, Enterobacter cloacae\u003C\u002Fem>, and \u003Cem>Klebsiella oxytoca\u003C\u002Fem>, were recovered. You were unable to provide any evidence the insanitary \u003Cstrong>(b)(4)\u003C\u002Fstrong> had been changed since it was installed. Equipment used in pharmaceutical manufacturing operations should be maintained in sanitary condition, and it is critical for certain equipment to be designed with a backflow prevention system to protect drug products from contamination.\u003C\u002Fp>\n\n\u003Cp>Your response is inadequate. The process flow diagram included in your response shows \u003Cstrong>(b)(4)\u003C\u002Fstrong> and \u003Cstrong>(b)(4)\u003C\u002Fstrong> also use the same \u003Cstrong>(b)(4)\u003C\u002Fstrong> as \u003Cstrong>(b)(4)\u003C\u002Fstrong> without any mechanism to prevent backflow. The process flow diagram does not provide sufficient assurance of effective backflow prevention mechanisms to protect each of the \u003Cstrong>(b)(4)\u003C\u002Fstrong> associated with the \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your response does not evaluate drug products manufactured in \u003Cstrong>(b)(4)\u003C\u002Fstrong> and \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fp>\n\n\u003Cp>\u003Cem>Production Oversight and Equipment Maintenance\u003C\u002Fem>\u003C\u002Fp>\n\n\u003Cp>In addition, your production management does not ensure the equipment used in the manufacture of drug products is suitable for its intended use and is properly maintained.\u003C\u002Fp>\n\n\u003Cp>Although the aforementioned \u003Cstrong>(b)(4)\u003C\u002Fstrong> was manifestly contaminated for an extended period, your production management failed to identify and remove the insanitary filter from use.\u003C\u002Fp>\n\n\u003Cp>Our investigators also observed packaging tape being used to seal the outside of a \u003Cstrong>(b)(4)\u003C\u002Fstrong> on \u003Cstrong>(b)(4)\u003C\u002Fstrong>. Your employees explained that the packaging tape was being used so that the equipment would be able to hold a \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fp>\n\n\u003Cp>Your response is inadequate. You stated that you repaired the kettle and commit to prevent unapproved maintenance activity in the future. However, there is no evidence that you performed a thorough evaluation of the current state of your manufacturing equipment. Also, you did not state how you were going to improve \u003Cstrong>(b)(4)\u003C\u002Fstrong> oversight of your facility and equipment.\u003C\u002Fp>\n\n\u003Cp>In response to this letter, provide:\u003C\u002Fp>\n\n\u003Cp>• Your CAPA plan to implement \u003Cstrong>(b)(4)\u003C\u002Fstrong> operations management oversight of facilities and equipment. This plan should ensure, among other things, evaluating suitability of equipment for its intended use, prompt detection of equipment\u002Ffacilities performance issues, effective execution of repairs, adherence to appropriate preventive maintenance schedules, timely technological upgrades to the equipment\u002Ffacility infrastructure, and improved systems for ongoing management review.\u003C\u002Fp>\n\n\u003Cp>• An independent, third-party review to evaluate objectively the sanitary design of your facilities and equipment, and to assess the adequacy of maintenance and control practices. Provide a detailed summary of their assessment and associated CAPA activities you will be undertaking.\u003C\u002Fp>\n\n\u003Cp>• Updated diagrams clearly identifying the \u003Cstrong>(b)(4)\u003C\u002Fstrong> located between the \u003Cstrong>(b)(4)\u003C\u002Fstrong> and the associated \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>Medical Device Quality System Violations\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>1. Failure to establish and maintain procedures to control product that does not conform to specified requirements, as required by 21 CFR 820.90(a). Specifically, a nonconformance was not generated after the filling line mechanic found the \u003Cstrong>(b)(4)\u003C\u002Fstrong>&nbsp;used on filling line \u003Cstrong>(b)(4)\u003C\u002Fstrong> (Hydral Dry Mouth Spray, Lot C164FT). The master filling\u002Fpackaging batch record for Hydral Dry Mouth Spray, Lot C164FT section 2.2.5 requires the \u003Cstrong>(b)(4)\u003C\u002Fstrong>.\u003C\u002Fp>\n\n\u003Cp>The filter event was discussed in your out-of-specification investigation OOS-907 in response to the test results indicating \u003Cem>Burkholderia\u003C\u002Fem>, sp. contamination of the Hydral Dry Mouth Spray, Lot C164FT. The OOS-907 report confirmed that upon deconstruction of the filter housing that the filter was not connected to the cap and that product could have bypassed the filter. The OOS-907 states that the filter was not likely effective throughout the entire fill of the lot. Although the cause for the \u003Cem>Burkholderia\u003C\u002Fem> in the lot was attributed to contaminated product provided by the primary manufacturer and formula owner, you failed to adequately investigate the filter nonconformance.\u003C\u002Fp>\n\n\u003Cp>Your firm’s response does not adequately address the observation. For example, your firm’s response indicates that your Out of Specification (OOS) procedure QSP 14.03 does not require \u003Cstrong>(b)(4)\u003C\u002Fstrong>. There was no evaluation into the cause of the \u003Cstrong>(b)(4)\u003C\u002Fstrong> used on filling line \u003Cstrong>(b)(4)\u003C\u002Fstrong> (Hydral Dry Mouth Spray, Lot C164FT). Your firm’s response further states that you do not use \u003Cstrong>(b)(4)\u003C\u002Fstrong> for the filling of any other products and that the Hydral Dry Mouth Spray will no longer be filled by DTI. The evaluation of nonconformances and the need for a timely investigation is essential to protecting against recurrence. Your firm has not established adequate OOS procedures to ensure the identification, documentation, evaluation, segregation and disposition of nonconforming product by DTI personnel.\u003C\u002Fp>\n\n\u003Cp>2. Failure to conduct, control and monitor production processes to ensure that a device conforms to its specifications, as required by 21 CFR 820.70. Specifically, the Master Filling\u002FPackaging batch record for Hydral Dry Mouth Spray, Lot C164FT section 2.2.5 requires the use of the \u003Cstrong>(b)(4)\u003C\u002Fstrong>. The \u003Cstrong>(b)(4)\u003C\u002Fstrong> by the line mechanic \u003Cstrong>(b)(4)\u003C\u002Fstrong> for the Hydral Dry Mouth Spray, Lot C164FT. Your firm’s OOS-907 states that the filter was likely not effective throughout the entire fill of the lot.\u003C\u002Fp>\n\n\u003Cp>Your firm’s response is inadequate in that the corrective actions taken by your firm are not complete and appropriate to remedy the deficiencies identified on Observation 5 of the form FDA 483, Inspectional Observations. Your firm failed to adequately address the lack of process controls in the manufacture of Hydral Dry Mouth Spray. Your response states that the Hydral Dry Mouth Spray is the only product that uses the \u003Cstrong>(b)(4)\u003C\u002Fstrong> and that your firm has discontinued manufacturing the product. The response is inadequate in that it does not address the underlying issue regarding the monitoring of controlled processes to ensure they remain in control. This affects all processes that can have an impact on product specifications for all products manufactured at your firm and is not limited to the Hydral Dry Mouth Spray filling operations.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>Quality Systems\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Your firm’s quality systems are inadequate. For guidance on establishing and maintaining CGMP-compliant quality systems, see FDA’s guidances: Q8(R2) Pharmaceutical Development at \u003Ca href=\"https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fq8r2-pharmaceutical-development\">https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fq8r2-pharmaceutical-development\u003C\u002Fa>, Q9 Quality Risk Management at \u003Ca href=\"https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fq9-quality-risk-management\">https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fq9-quality-risk-management\u003C\u002Fa>, and Q10 Pharmaceutical Quality System at \u003Ca href=\"https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fq10-pharmaceutical-quality-system\">https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fq10-pharmaceutical-quality-system\u003C\u002Fa>.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>Objectionable Organisms\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>For further information regarding the significance of \u003Cem>B. cepacia\u003C\u002Fem> complex and other objectionable contamination of non-sterile, water-based drug products, see FDA’s advisory notice posted on July 7, 2021, at \u003Ca href=\"https:\u002F\u002Fwww.fda.gov\u002FDrugs\u002FDrugSafety\u002Fucm559508.htm\">https:\u002F\u002Fwww.fda.gov\u002FDrugs\u002FDrugSafety\u002Fucm559508.htm\u003C\u002Fa>.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>Drug Production Ceased\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>We acknowledge your commitment to cease production of 0.12% chlorhexidine oral rinse.\u003C\u002Fp>\n\n\u003Cp>In response to this letter, clarify whether you intend to resume manufacturing this drug for the U.S. market at this facility in the future. If you plan to resume manufacturing 0.12% chlorhexidine oral rinse for the U.S. market, notify this office before resuming your operations.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>Responsibilities as a Contractor\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Drugs must be manufactured in conformance with CGMP. FDA is aware that many drug manufacturers use independent contractors such as production facilities, testing laboratories, packagers, and labelers. FDA regards contractors as extensions of the manufacturer.\u003C\u002Fp>\n\n\u003Cp>You are responsible for the quality of drugs you produce as a contract facility regardless of agreements in place with application sponsors and product owners. You are required to ensure that drugs are made in accordance with section 501(a)(2)(B) of the FD&amp;C Act for safety, identity, strength, quality, and purity. See FDA’s guidance document Contract Manufacturing Arrangements for Drugs: Quality Agreements at \u003Ca href=\"https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fcontract-manufacturing-arrangements-drugs-quality-agreements-guidance-industry\">https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fcontract-manufacturing-arrangements-drugs-quality-agreements-guidance-industry\u003C\u002Fa>.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>CGMP Consultant Recommended\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Based upon the nature of the violations we identified at your firm, we strongly recommend engaging a consultant qualified as set forth in 21 CFR 211.34 to assist your firm in meeting CGMP requirements. Your use of a consultant does not relieve your firm’s obligation to comply with CGMP. Your firm’s executive management remains responsible for resolving all deficiencies and systemic flaws to ensure ongoing CGMP compliance.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>Conclusion\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>The violations cited in this letter are not intended to be an all-inclusive list of violations that exist at your facility\u002Fin connection with your products. You are responsible for investigating and determining the causes of any violations and for preventing their recurrence or the occurrence of other violations.\u003C\u002Fp>\n\n\u003Cp>Correct any violations promptly. Failure to promptly and adequately address this matter may result in regulatory or legal action without further notice including, without limitation, seizure and injunction. Unresolved violations may also prevent other Federal agencies from awarding contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been corrected.\u003C\u002Fp>\n\n\u003Cp>Failure to address violations may also cause FDA to withhold issuance of Export Certificates. FDA may withhold approval of new applications or supplements listing your firm as a drug manufacturer until any violations are completely addressed and we confirm your compliance with CGMP. We may re-inspect to verify that you have completed corrective actions to address any violations. Also, should FDA determine that your devices do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\u003C\u002Fp>\n\n\u003Cp>This letter notifies you of our findings and provides you an opportunity to address the above deficiencies. After you receive this letter, respond to this office in writing within 15 working days. Specify what you have done to address any violations and to prevent their recurrence. In response to this letter, you may provide additional information for our consideration as we continue to assess your activities and practices. If you cannot complete corrective actions within 15 working days, state your reasons for delay and your schedule for completion.\u003C\u002Fp>\n\n\u003Cp>Your written notification should refer to the Warning Letter Number above (612599). Please address your reply via email to: ORAPHARM3_RESPONSES@fda.hhs.gov\u003C\u002Fp>\n\n\u003Cp>Attention: Russell K. Riley, Compliance Officer\u003Cbr>\nU.S. Food and Drug Administration\u003Cbr>\nDivision of Pharmaceutical Quality Operations Division III\u003C\u002Fp>\n\n\u003Cp>If you have questions regarding the contents of this letter, please contact Russell K. Riley at (630) 277-1908.\u003C\u002Fp>\n\n\u003Cp>Sincerely,\u003Cbr>\n\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>Nicholas F. Lyons\u003Cbr>\nActing Program Division Director\u003Cbr>\nDivision of Pharmaceutical Quality Operations Division III\u003C\u002Fp>\n\n\u003Cp>Sincerely,\u003Cbr>\n\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>Blake Bevill, M.S.\u003Cbr>\nProgram Division Director\u003Cbr>\nOffice of Medical Devices and Radiological Health\u003Cbr>\nOperations Div. 2 Central\u003C\u002Fp>\n\n\n\n\n\n\n\n              \n                                            \n              \n            ","Delivery Method:\n\nUPS\n\nProduct:\n\nMedical Devices\n\nRecipient:\n\nRecipient Name\n\nMr. Stephen A. Erickson\n\nRecipient Title\n\nPresident and Co-Owner\n\nDental Technologies Inc.\n\n6901 N. Hamlin Avenue\n\nLincolnwood, IL 60712\n\nUnited States\n\nIssuing Office:\n\nDivision of Pharmaceutical Quality Operations III\n\nUnited States\n\nWARNING LETTER\n\nWL # 612599\n\nNovember 30, 2021\n\nDear Mr. Erickson:\n\nThe U.S. Food and Drug Administration (FDA) inspected your drug and medical device manufacturing facility, Dental Technologies Inc., FEI 1413475, at 6901 N. Hamlin Avenue, Lincolnwood, Illinois from December 7, 2020, to January 20, 2021.\n\nThis warning letter summarizes significant violations of Current Good Manufacturing Practice (CGMP) regulations for finished pharmaceuticals and Quality System (QS) regulations for medical devices. See Title 21 Code of Federal Regulations (CFR), parts 210 and 211 (21 CFR parts 210 and 211) and Title 21 CFR, part 820, respectively.\n\nBecause your methods, facilities, or controls for manufacturing, processing, packing, or holding do not conform to CGMP, your drug products are adulterated within the meaning of section 501(a)(2)(B) of the Federal Food, Drug, and Cosmetic Act (FD&C Act), 21 U.S.C. 351(a)(2)(B).\n\nAdditionally, your drug product, Paroex 0.12% chlorhexidine oral rinse, is adulterated under section 501(a)(2)(A) of the FD&C Act, 21 U.S.C. 351(a)(2)(A), in that a substance was prepared, packed, or held under insanitary conditions, whereby it may have become contaminated with filth and rendered injurious to health.\n\nUnder section 201(h) of the FD&C Act, 21 U.S.C. § 321(h), G•U•M® HYDRAL™ OTC products are devices because they are intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease, or to affect the structure or any function of the body. The HYDRAL™ OTC products are intended for treatment of Xerostomia\u002Fdry mouth.\n\nThis inspection also revealed that your devices are adulterated within the meaning of section 501(h) of the FD&C Act, 21 U.S.C. § 351(h) because the methods used in, or the facilities or controls used for, their manufacture, packing, storage, or installation are not in conformity with the current good manufacturing practice requirements of the Quality System regulation.\n\nDrug CGMP Violations\n\nWe reviewed your February 10, 2021, response to our Form FDA 483 in detail and acknowledge receipt of your subsequent correspondence. Your response is inadequate because it did not provide sufficient detail or evidence of corrective actions to bring your operations into compliance with CGMP.\n\nDuring our inspection, our investigators observed specific violations including, but not limited to, the following.\n\n1. Your firm failed to thoroughly investigate any unexplained discrepancy or failure of a batch or any of its components to meet any of its specifications, whether or not the batch has already been distributed (21 CFR 211.192).\n\nYou lack adequate investigations into failing microbiological results for both finished drug products and components.\n\nA. In October 2020, your third-party laboratory identified Burkholderia cepacia complex (BCC), specifically Burkholderia lata in Paroex 0.12% chlorhexidine oral rinse. Until prompted by FDA, your investigation failed to adequately evaluate excessive aerobic plate counts (including too numerous to count (TNTC)) and past BCC contamination events at your facility. Your investigation did not adequately address multiple potential root causes of the contamination. For example, we noted that your cleaning program was deficient. Notably, a lack of cleaning competency extended to multiple products made at your facility, and in one instance cleaning procedures had to be repeated two or more times to assure their efficacy.\n\nYou failed to implement systemic corrective actions and preventive actions (CAPA) and investigate additional lots that may have been affected.\n\nYour firm’s response, which includes your firm’s updated investigation, was inadequate.\n\n• Your investigation did not sufficiently address the TNTC levels of microorganisms in numerous Paroex batch retain samples, including the inability of the formulation to exert any meaningful inhibitory effect on microbial growth in your product.\n\n• Your investigation did not adequately explain the extreme variability of results within batches, including TNTC and passing results obtained from testing of multiple retain samples from the same batch. Also, you did not adequately describe how your future sampling strategy will be improved to provide better understanding of (b)(4).\n\n• You identified the chlorhexidine gluconate active pharmaceutical ingredient (API) as the most likely root cause of the Paroex contamination, but your investigation lacked justification for this assertion. For example:\n\no The investigation indicated the API supplier found Serratia marcescens in certain lots of their chlorhexidine gluconate API, and this caused it to be the likely source of the BCC contamination. However, you noted the API supplier, (b)(4), recalled affected lots contaminated with Serratia marcescens and your API lots met microbiological specifications. Further, your investigation lacks any indication that BCC had been isolated during chlorhexidine gluconate testing by either your supplier or your laboratory.\n\no The investigation failed to address that, in addition to the lack of data indicating the presence of BCC in your API, BCC is very different from Serratia marcescens as they are in different taxonomic classes and have significantly different phenotypic and genotypic characteristics.\n\n• Your response states your Paroex 0.12% chlorhexidine gluconate oral rinse release testing did not detect Burkholderia lata because of a low level of contamination. This conclusion is flawed since you were not testing your product for BCC at the time, and your test method was inadequate to reliably detect these microorganisms.\n\n• Your response states shared equipment was cleaned and sanitized before use, per your procedures. However, your response lacks evidence of traceability confirming that the (b)(4), identified as a potential cause of contamination, was adequately cleaned, and sanitized before use during manufacturing.\n\n• Your response acknowledges that the use of ancillary equipment is not documented in your batch records. However, you failed to include systemic corrections to your batch records and documentation systems to ensure traceability of each piece of equipment used during manufacturing, including but not limited to, their use, cleaning, sanitization, calibration, and maintenance.\n\n• You failed to adequately explain how you will systemically remediate your investigations program to ensure investigations are thorough, root causes are appropriately identified, scope of impacted products is appropriately evaluated, and CAPAs are prompt and effective.\n\nThe Paroex product owner released a public announcement on December 28, 2020, detailing the receipt of a significant number of adverse events (29) associated with the product. Affected patients who received Paroex 0.12% chlorhexidine oral rinse tested positive for Burkholderia lata. Use of the contaminated product in patients who are immunocompromised or have pre-existing respiratory conditions, including critically ill patients and patients infected with COVID-19, is especially concerning as these patients are at increased risk for serious and life-threatening infections.\n\nWe acknowledge that batches of Paroex 0.12% chlorhexidine gluconate oral rinse bearing an expiration date from June 30 to September 30, 2022, were recalled on October 27, 2020. It was not until further discussions with FDA that the recall was extended to other potentially impacted batches of Paroex 0.12% chlorhexidine gluconate oral rinse products, (b)(4), and (b)(4) drug products.\n\nIn addition, FDA collected a sample of Paroex 0.12% chlorhexidine oral rinse lot C219DQ. Our testing revealed BCC contamination and failing total counts, which further demonstrated insanitary conditions (501(a)(2)(A)) at your facility.\n\nB. Your firm invalidated failing microbiological results obtained by your third-party laboratory during stability testing of a batch of AlphaCaine topical anesthetic gel in March 2019, without scientific justification.\n\nPseudomonas aeruginosa was isolated from the product sample and your laboratory retested the product. Your investigation determined your test method to be unsuitable because “(b)(4).” After retesting with a method your laboratory determined suitable, you obtained passing results.\n\nYour investigation concluded, without adequate supporting evidence, that your third-party laboratory “may have contaminated the sample,” though they indicated no laboratory error had occurred and results were reproducible. Further, although you acknowledge your original test method for AlphaCaine topical anesthetic gel was inappropriate, your investigation determined “(b)(4).”\n\nYour firm’s response is inadequate. You failed to perform a thorough evaluation of test methods used to ensure their adequacy.\n\nIn response to this letter, provide:\n\n• Your procedures describing in-process and finished product sampling and testing. Address how you will ensure samples are representative and can detect variation within a batch. Include how testing of individual samples ((b)(4)) will be better leveraged to evaluate uniformity throughout the process.\n\n• A comprehensive and independent assessment of your manufacturing processes to determine the current state of control as well as to determine if any process remediation and new validation studies are necessary. This assessment should include, but not be limited to, a study to extensively assess intra\u002Finter-batch uniformity for all appropriate attributes of your drug products.\n\n• A comprehensive, independent assessment of your water system design, control, and maintenance. Include a description of all areas in your water system that can be stagnant.\n\n• A retrospective, independent review of all batch failures, rejected batches, returned drug products, complaints, and deviations that may have been related to microbiological contamination for the last three years.\n\n• A comprehensive, independent assessment of your overall system for investigating deviations, discrepancies, complaints, out-of-specification (OOS) results, and failures. Provide a detailed action plan to remediate this system. Your action plan should include, but not be limited to, significant improvements in investigation competencies, scope determination, root cause evaluation, CAPA effectiveness, quality unit oversight, and written procedures. Address how your firm will ensure all phases of investigations are appropriately conducted.\n\n• A retrospective, independent review of all invalidated OOS results (including in-process, release, and stability testing) for products currently in the U.S. market and within expiry as of the date of this letter. Include a report summarizing the findings of the analysis, detailing the following for each OOS:\n\no Determine whether the scientific justification and evidence relating to the invalidated OOS results conclusively or inconclusively demonstrate causative laboratory error.\n\no For investigations that conclusively establish laboratory root cause, provide rationale, and ensure that all other laboratory methods vulnerable to the same or similar root cause are identified for remediation.\n\no For all OOS results found by the retrospective review to have an inconclusive or no root cause identified in the laboratory, include a thorough review of production (e.g., batch manufacturing records, adequacy of the manufacturing steps, suitability of equipment\u002Ffacilities, variability of raw materials, process capability, deviation history, complaint history, batch failure history). Provide a summary of potential manufacturing root causes for each investigation, and any manufacturing operation improvements.\n\n• A comprehensive review and remediation plan for your OOS result investigation systems. The CAPA should include, but not be limited to, addressing the following:\n\no Quality unit oversight of laboratory investigations\n\no Identification of adverse laboratory control trends\n\no Resolution of causes of laboratory variation\n\no Initiation of thorough investigations of potential manufacturing causes whenever a laboratory cause cannot be conclusively identified\n\no Adequately scoping of each investigation and its CAPA\n\no Revised OOS investigation procedures with these and other remediations.\n\n• A complete assessment of documentation systems used throughout your manufacturing and laboratory operations to determine where documentation practices are insufficient. Include a detailed CAPA plan that comprehensively remediates your firm’s documentation practices to ensure you retain attributable, legible, complete, original, accurate, and contemporaneous records throughout your operation.\n\n• Documentation to confirm the identity, cleaning, and sanitization of the (b)(4) used in the manufacture of Paroex 0.12% chlorhexidine oral rinse, starting with lot C170FY. Specify the (b)(4) used in lot C170FY and each following lot.\n\n2. Your firm failed to establish laboratory controls that include scientifically sound and appropriate specifications, standards, sampling plans, and test procedures designed to assure that components, drug product containers, closures, in-process materials, labeling, and drug products conform to appropriate standards of identity, strength, quality, and purity (21 CFR 211.160(b)).\n\nYour non-sterile aqueous-based drug product specifications did not include Burkholderia cepacia until October 2020. In 2012, you had identified Burkholderia cepacia testing as a requirement for chlorhexidine in your OOS investigation #268. However, you did not update your finished product specifications to include this testing until after Paroex 0.12% chlorhexidine oral rinse manufactured at your facility was found contaminated with Burkholderia cepacia complex in 2020.\n\nYour response is inadequate. You stated that the testing protocol submitted in the Paroex 0.12% chlorhexidine oral rinse drug application did not include Burkholderia cepacia, and that the United States Pharmacopeia (USP) General Chapter \u003C1111> lacks explicit reference to Burkholderia cepacia complex.\n\nYour response states that you “followed the guidance outlined in” USP General Chapter \u003C1111>. You add that “USP \u003C1111> does not require testing these products for the absence of B. cepacia.”\n\nIt should be noted that USP \u003C1111> states that the list of specified microbes “is not necessarily exhaustive, and for a given preparation it may be necessary to test for other microorganisms.” Per USP, “the significance of other organisms recovered should be evaluated” considering multiple factors. Finally, USP \u003C1111> is an informational chapter, and does not establish “requirements” or CGMP expectations.\n\nIt is critical that firms establish scientifically sound and appropriate specifications for total count limits and freedom from objectionable microorganisms. Release testing under CGMP may include, but not be limited to, methods found in a drug application, those found in USP test chapters, and any additional tests as per 21 CFR 211.160. While USP methods are often incorporated into the release regimen, the methods are not necessarily batch release standards and may be insufficient to fully characterize the microbiological quality of a drug. USP chapters do not focus on identification of microbes, although this is essential to detect significant opportunistic pathogens in certain products. It is also important to note that USP acknowledges non-monograph tests and acceptance criteria may be necessary in addition to tests in the individual monograph. This is because it is manifestly impossible for each USP monograph to include all potential impurities and contaminants, including microbial contamination.\n\nWhile it may be impractical for each potentially objectionable microbe to be exhaustively listed in a specification, it is important that microbial flora found in your drug products be appropriately evaluated. This evaluation should include consideration of the full spectrum of patients who could receive your products based on their intended use. Such assessments should include input from qualified staff, such as individuals with strong microbiology and clinical expertise.\n\nYour firm continued to release drug products without BCC testing and did not update specifications until October 2020.\n\nYour drugs are often used in hospital or clinical settings in which patients may have a higher vulnerability to infection with Burkholderia cepacia and other objectionable organisms. Detecting numbers and types of objectionable microorganisms in your drug products is critical to making appropriate batch disposition decisions.\n\nIn response to this letter, provide:\n\n• A comprehensive independent assessment of your laboratory practices, procedures, methods, equipment, documentation, and analyst competencies. Based on this review, provide a detailed plan to remediate and evaluate the effectiveness of your laboratory system (including ensuring adequacy of testing functions performed by a third-party laboratory on your behalf).\n\n• A list of microbial specifications, including test methods, used to analyze each lot of your drug products before release to ensure they are appropriate for their intended use. Also include the formulas (ingredients; percent composition) for each drug product, and state whether you will be testing batches for BCC as part of release testing. Release testing specifications should be developed based, in part, on your formulation and validated manufacturing steps to ensure your aqueous drug products are free from BCC.\n\n• An action plan and timelines for conducting full microbiological testing of retain samples to determine the quality of all batches of drug product with aqueous formulations distributed to the United States that are within expiry as of the date of this letter (if not already retrospectively tested). Include a summary of all results obtained from testing retain samples from each batch within expiry. You should test microbiological quality (total counts; identification of bioburden to detect objectionable microbes) of each batch. If such testing reveals an OOS result or otherwise indicates substandard quality, take rapid corrective actions, such as notifying customers and assessment for product recalls.\n\n• A comprehensive, independent assessment of the design and control of your firm’s manufacturing operations, with a detailed and thorough review of all microbiological hazards and a CAPA plan that describes improvements to design and control.\n\n• Complete retrospective investigations into all batches with potential objectionable microbial contamination or an OOS microbiological result (whether or not later invalidated). The investigations should detail your findings regarding the root causes of the contamination.\n\n3. Your firm failed to establish adequate written procedures for production and process control designed to assure that the drug products you manufacture have the identity, strength, quality, and purity they purport or are represented to possess (21 CFR 211.100(a)).\n\nYou did not adequately validate the processes used to clean your non-dedicated, product-contact equipment.\n\nA. You observed residue on (b)(4) during the 0.12% chlorhexidine gluconate oral rinse cleaning validation. Although you documented the deviation, you did not identify the residue. You determined that no corrective action was necessary, and your cleaning procedures remained unchanged. You selected 0.12% chlorhexidine gluconate oral rinse for your cleaning validation study because you manufacture the drug product (b)(4) and claim that it represents other water-based rinses manufactured in the shared equipment.\n\nB. Adequate validation or verification studies are not always performed when introducing (b)(4) risk products (e.g., difficult to clean, low solubility) into the non-dedicated equipment. For example, you neither incorporated Oral Cleansing Gel, 1.7% hydrogen peroxide into your (b)(4)-based cleaning validation matrix nor performed cleaning verification to evaluate the cleanability of this new, more viscous product.\n\nC. A (b)(4) was (b)(4) when failing microbiological results were obtained during the 0.12% chlorhexidine gluconate oral rinse cleaning validation. Your cleaning procedures were not updated to reflect the need for this additional (b)(4) performed during the validation.\n\nD. Your cleaning validation studies do not include all product-contact manufacturing equipment, such as (b)(4).\n\nE. Your procedures are (b)(4), lack specificity to ensure repeatability, and do not require equipment to be (b)(4) to ensure hard to reach areas are cleaned properly.\n\nCleaning programs should be designed to ensure equipment is consistently and properly cleaned to prevent contamination. Inadequate removal of residues from product contact surfaces of non-dedicated manufacturing equipment during cleaning can lead to cross-contamination of drug products subsequently manufactured on that equipment.\n\nWe acknowledge you updated cleaning procedures and commit to perform additional validations as needed. However, your response did not adequately assess the risk of potential cross-contamination and its effect on product quality for batches of drug product manufactured on this shared equipment.\n\nIn response to this letter, provide:\n\n• A comprehensive, independent retrospective assessment of your cleaning effectiveness to evaluate the scope of cross-contamination hazards. Include the identity of residues, other manufacturing equipment that may have been improperly cleaned, and an assessment whether cross-contaminated drug products may have been released for distribution. The\n\nassessment should identify any inadequacies of cleaning procedures and practices and encompass each piece of manufacturing equipment used to manufacture more than one product.\n\n• A CAPA plan, based on the retrospective assessment of your cleaning program, that includes appropriate remediations to your cleaning processes and practices, and timelines for completion. Provide a detailed summary of vulnerabilities in your process for lifecycle management of equipment cleaning. Describe improvements to your cleaning program, including enhancements to cleaning effectiveness; improved ongoing verification of proper cleaning execution for all drug products and equipment; and all other needed remediations.\n\n• Appropriate improvements to your cleaning validation program, with special emphasis on incorporating conditions identified as worst-case in your drug manufacturing operation. This should include, but not be limited to, identification and evaluation of all worst-case:\n\no Drugs with higher toxicities\n\no Drugs with higher drug potencies\n\no Drugs of lower solubility in their cleaning solvents\n\no Drugs with characteristics that make them difficult to clean\n\no Swabbing locations for areas that are most difficult to clean\n\no Recovery studies to ensure swab sample results are reliable and meaningful\n\no Maximum hold times before cleaning\n\nIn addition, describe the steps that must be taken in your change management system before introduction of new manufacturing equipment or new product.\n\n• A summary of updated SOPs that ensure an appropriate program is in place for verification and validation of cleaning procedures for drug products, processes, and equipment.\n\n4. Your firm failed to use equipment in the manufacture, processing, packing, or holding of drug products that is of appropriate design, adequate size, and suitably located to facilitate operations for its intended use and for its cleaning and maintenance (21 CFR 211.63)\n\nYour manufacturing equipment is not designed and maintained appropriately.\n\n(b)(4)\n\nUpon our request, you (b)(4) installed on (b)(4). Our investigators observed residue inside the (b)(4) after the equipment had been cleaned and sanitized. Also during our inspection, Pseudomonas aeruginosa was isolated from (b)(4) located on another manufacturing (b)(4). (b)(4) are not easily cleanable (including sanitizable) and can contribute to contamination.\n\nYour response is inadequate.\n\n• You stated that (b)(4) would have been (b)(4) because it was outside the (b)(4) clean hold time. However, you failed to explain why these residues were present after the equipment had already been cleaned and sanitized per your validated procedure.\n\n• You stated that the white residue was “most likely residual (b)(4) from the hand sanitizer product.” However, after manufacturing the hand sanitizer, (b)(4) had been cleaned, sanitized, and used to make another product, hydrogen peroxide rinse, 1.5% w\u002Fw. Your response lacks evidence to support your hypothesis regarding the identity of the residues.\n\n• You indicated that (b)(4) will solve this insanitary design problem and commit to implement procedures to (b)(4) as part of routine cleaning. You did not provide any mitigating action until this CAPA intended to remediate the cleaning issue is implemented. You continue to manufacture and release drug products.\n\nBackflow Prevention Systems\n\nYour (b)(4) connected to (b)(4) lacked an effective backflow prevention system to prevent contamination of drug product from downstream equipment. Upon request by our investigators, your firm swabbed the visibly contaminated and thoroughly (b)(4) and (b)(4). Numerous microorganisms, including Pseudomonas aeruginosa, Enterobacter cloacae, and Klebsiella oxytoca, were recovered. You were unable to provide any evidence the insanitary (b)(4) had been changed since it was installed. Equipment used in pharmaceutical manufacturing operations should be maintained in sanitary condition, and it is critical for certain equipment to be designed with a backflow prevention system to protect drug products from contamination.\n\nYour response is inadequate. The process flow diagram included in your response shows (b)(4) and (b)(4) also use the same (b)(4) as (b)(4) without any mechanism to prevent backflow. The process flow diagram does not provide sufficient assurance of effective backflow prevention mechanisms to protect each of the (b)(4) associated with the (b)(4). Your response does not evaluate drug products manufactured in (b)(4) and (b)(4).\n\nProduction Oversight and Equipment Maintenance\n\nIn addition, your production management does not ensure the equipment used in the manufacture of drug products is suitable for its intended use and is properly maintained.\n\nAlthough the aforementioned (b)(4) was manifestly contaminated for an extended period, your production management failed to identify and remove the insanitary filter from use.\n\nOur investigators also observed packaging tape being used to seal the outside of a (b)(4) on (b)(4). Your employees explained that the packaging tape was being used so that the equipment would be able to hold a (b)(4).\n\nYour response is inadequate. You stated that you repaired the kettle and commit to prevent unapproved maintenance activity in the future. However, there is no evidence that you performed a thorough evaluation of the current state of your manufacturing equipment. Also, you did not state how you were going to improve (b)(4) oversight of your facility and equipment.\n\nIn response to this letter, provide:\n\n• Your CAPA plan to implement (b)(4) operations management oversight of facilities and equipment. This plan should ensure, among other things, evaluating suitability of equipment for its intended use, prompt detection of equipment\u002Ffacilities performance issues, effective execution of repairs, adherence to appropriate preventive maintenance schedules, timely technological upgrades to the equipment\u002Ffacility infrastructure, and improved systems for ongoing management review.\n\n• An independent, third-party review to evaluate objectively the sanitary design of your facilities and equipment, and to assess the adequacy of maintenance and control practices. Provide a detailed summary of their assessment and associated CAPA activities you will be undertaking.\n\n• Updated diagrams clearly identifying the (b)(4) located between the (b)(4) and the associated (b)(4).\n\nMedical Device Quality System Violations\n\n1. Failure to establish and maintain procedures to control product that does not conform to specified requirements, as required by 21 CFR 820.90(a). Specifically, a nonconformance was not generated after the filling line mechanic found the (b)(4) used on filling line (b)(4) (Hydral Dry Mouth Spray, Lot C164FT). The master filling\u002Fpackaging batch record for Hydral Dry Mouth Spray, Lot C164FT section 2.2.5 requires the (b)(4).\n\nThe filter event was discussed in your out-of-specification investigation OOS-907 in response to the test results indicating Burkholderia, sp. contamination of the Hydral Dry Mouth Spray, Lot C164FT. The OOS-907 report confirmed that upon deconstruction of the filter housing that the filter was not connected to the cap and that product could have bypassed the filter. The OOS-907 states that the filter was not likely effective throughout the entire fill of the lot. Although the cause for the Burkholderia in the lot was attributed to contaminated product provided by the primary manufacturer and formula owner, you failed to adequately investigate the filter nonconformance.\n\nYour firm’s response does not adequately address the observation. For example, your firm’s response indicates that your Out of Specification (OOS) procedure QSP 14.03 does not require (b)(4). There was no evaluation into the cause of the (b)(4) used on filling line (b)(4) (Hydral Dry Mouth Spray, Lot C164FT). Your firm’s response further states that you do not use (b)(4) for the filling of any other products and that the Hydral Dry Mouth Spray will no longer be filled by DTI. The evaluation of nonconformances and the need for a timely investigation is essential to protecting against recurrence. Your firm has not established adequate OOS procedures to ensure the identification, documentation, evaluation, segregation and disposition of nonconforming product by DTI personnel.\n\n2. Failure to conduct, control and monitor production processes to ensure that a device conforms to its specifications, as required by 21 CFR 820.70. Specifically, the Master Filling\u002FPackaging batch record for Hydral Dry Mouth Spray, Lot C164FT section 2.2.5 requires the use of the (b)(4). The (b)(4) by the line mechanic (b)(4) for the Hydral Dry Mouth Spray, Lot C164FT. Your firm’s OOS-907 states that the filter was likely not effective throughout the entire fill of the lot.\n\nYour firm’s response is inadequate in that the corrective actions taken by your firm are not complete and appropriate to remedy the deficiencies identified on Observation 5 of the form FDA 483, Inspectional Observations. Your firm failed to adequately address the lack of process controls in the manufacture of Hydral Dry Mouth Spray. Your response states that the Hydral Dry Mouth Spray is the only product that uses the (b)(4) and that your firm has discontinued manufacturing the product. The response is inadequate in that it does not address the underlying issue regarding the monitoring of controlled processes to ensure they remain in control. This affects all processes that can have an impact on product specifications for all products manufactured at your firm and is not limited to the Hydral Dry Mouth Spray filling operations.\n\nQuality Systems\n\nYour firm’s quality systems are inadequate. For guidance on establishing and maintaining CGMP-compliant quality systems, see FDA’s guidances: Q8(R2) Pharmaceutical Development at https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fq8r2-pharmaceutical-development, Q9 Quality Risk Management at https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fq9-quality-risk-management, and Q10 Pharmaceutical Quality System at https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fq10-pharmaceutical-quality-system.\n\nObjectionable Organisms\n\nFor further information regarding the significance of B. cepacia complex and other objectionable contamination of non-sterile, water-based drug products, see FDA’s advisory notice posted on July 7, 2021, at https:\u002F\u002Fwww.fda.gov\u002FDrugs\u002FDrugSafety\u002Fucm559508.htm.\n\nDrug Production Ceased\n\nWe acknowledge your commitment to cease production of 0.12% chlorhexidine oral rinse.\n\nIn response to this letter, clarify whether you intend to resume manufacturing this drug for the U.S. market at this facility in the future. If you plan to resume manufacturing 0.12% chlorhexidine oral rinse for the U.S. market, notify this office before resuming your operations.\n\nResponsibilities as a Contractor\n\nDrugs must be manufactured in conformance with CGMP. FDA is aware that many drug manufacturers use independent contractors such as production facilities, testing laboratories, packagers, and labelers. FDA regards contractors as extensions of the manufacturer.\n\nYou are responsible for the quality of drugs you produce as a contract facility regardless of agreements in place with application sponsors and product owners. You are required to ensure that drugs are made in accordance with section 501(a)(2)(B) of the FD&C Act for safety, identity, strength, quality, and purity. See FDA’s guidance document Contract Manufacturing Arrangements for Drugs: Quality Agreements at https:\u002F\u002Fwww.fda.gov\u002Fregulatory-information\u002Fsearch-fda-guidance-documents\u002Fcontract-manufacturing-arrangements-drugs-quality-agreements-guidance-industry.\n\nCGMP Consultant Recommended\n\nBased upon the nature of the violations we identified at your firm, we strongly recommend engaging a consultant qualified as set forth in 21 CFR 211.34 to assist your firm in meeting CGMP requirements. Your use of a consultant does not relieve your firm’s obligation to comply with CGMP. Your firm’s executive management remains responsible for resolving all deficiencies and systemic flaws to ensure ongoing CGMP compliance.\n\nConclusion\n\nThe violations cited in this letter are not intended to be an all-inclusive list of violations that exist at your facility\u002Fin connection with your products. You are responsible for investigating and determining the causes of any violations and for preventing their recurrence or the occurrence of other violations.\n\nCorrect any violations promptly. Failure to promptly and adequately address this matter may result in regulatory or legal action without further notice including, without limitation, seizure and injunction. Unresolved violations may also prevent other Federal agencies from awarding contracts. Additionally, should FDA determine that you have Quality System regulation violations that are reasonably related to premarket approval applications for Class III devices, such devices will not be approved until the violations have been corrected.\n\nFailure to address violations may also cause FDA to withhold issuance of Export Certificates. FDA may withhold approval of new applications or supplements listing your firm as a drug manufacturer until any violations are completely addressed and we confirm your compliance with CGMP. We may re-inspect to verify that you have completed corrective actions to address any violations. Also, should FDA determine that your devices do not meet the requirements of the Act, requests for Certificates to Foreign Governments (CFG) may not be granted.\n\nThis letter notifies you of our findings and provides you an opportunity to address the above deficiencies. After you receive this letter, respond to this office in writing within 15 working days. Specify what you have done to address any violations and to prevent their recurrence. In response to this letter, you may provide additional information for our consideration as we continue to assess your activities and practices. If you cannot complete corrective actions within 15 working days, state your reasons for delay and your schedule for completion.\n\nYour written notification should refer to the Warning Letter Number above (612599). Please address your reply via email to: ORAPHARM3_RESPONSES@fda.hhs.gov\n\nAttention: Russell K. Riley, Compliance Officer\n\nU.S. Food and Drug Administration\n\nDivision of Pharmaceutical Quality Operations Division III\n\nIf you have questions regarding the contents of this letter, please contact Russell K. Riley at (630) 277-1908.\n\nSincerely,\n\n\u002FS\u002F\n\nNicholas F. Lyons\n\nActing Program Division Director\n\nDivision of Pharmaceutical Quality Operations Division III\n\nSincerely,\n\n\u002FS\u002F\n\nBlake Bevill, M.S.\n\nProgram Division Director\n\nOffice of Medical Devices and Radiological Health\n\nOperations Div. 2 Central","Dental Technologies Inc.","dental-technologies-inc-612599-11302021","2026-08-18T06:42:29.262718+00:00","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fdental-technologies-inc-612599-11302021","2026-10-26T08:08:22.930897+00:00","2021-12-14","612599","Mr. Stephen A. Erickson","2026-08-20T02:20:38.474+00:00","UPS","2021-11-30",{"id":152,"raw":153,"subject":158,"body_html":159,"body_text":160,"firm_name":161,"letter_id":162,"created_at":45,"fei_number":20,"letter_url":163,"updated_at":164,"action_type":23,"case_status":48,"posted_date":165,"marcs_cms_no":166,"product_type":106,"closeout_date":20,"issuing_office":157,"recipient_name":167,"body_fetched_at":168,"delivery_method":20,"recipient_title":20,"reference_number":20,"action_taken_date":169,"medical_device_id":20,"response_letter_date":20},1608,[154,155,156,157,158,13,13,13],"\u003Ctime datetime=\"2024-02-13T14:20:00Z\">02\u002F13\u002F2024\u003C\u002Ftime>\n","\u003Ctime datetime=\"2024-02-06T05:00:00Z\">02\u002F06\u002F2024\u003C\u002Ftime>\n","\u003Ca href=\"\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fglobal-life-technologies-corp-674279-02062024\">Global Life Technologies Corp.\u003C\u002Fa>","Center for Drug Evaluation and Research | CDER","Unapproved New Drugs\u002FMisbranded","\n\n                            \n                            \n                            \n                            \n                                              \n  \n \n\n                 \n\n \n\n\u003Cdiv>\n  \u003Cdl>\n\n      \n      \n              \u003Cdt>Product:\u003C\u002Fdt> \n        \u003Cdd>Drugs                          \n            \n            \n            \n            \n            \n            \n            \n             \n            \n            \n            \n              \n            \n            \n            \u003C\u002Fdd>\n      \n          \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n\n\u003Chr>\n\n\u003Cdiv>\n  \u003Cdiv>\n    \u003Cdl>\n\n        \u003Cdt>Recipient:\u003C\u002Fdt>\n\n                      \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Name\u003C\u002Fdiv>\n              \u003Cdiv>John Willimann\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n                                \u003Cdd>\n  \u003Cdiv>\n    \u003Cdiv>Recipient Title\u003C\u002Fdiv>\n              \u003Cdiv>President\u003C\u002Fdiv>\n          \u003C\u002Fdiv>\n\u003C\u002Fdd>\n          \n            \u003Cdd>Global Life Technologies Corp.\u003C\u002Fdd>\n\n          \n                      \u003Cdd>\u003Cp>\u003Cspan>4608 N. Park Avenue, 2nd floor\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>Chevy Chase\u003C\u002Fspan>, \u003Cspan>MD\u003C\u002Fspan> \u003Cspan>20815\u003C\u002Fspan>\u003Cbr>\n\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n          \n          \n            \n            \u003Cdd>\n\n    \u003C\u002Fdd>\u003Cdd>\u003Cspan>\u003C\u002Fspan>\u003Ca href=\"mailto:john@nozin.com\"> john@nozin.com\u003C\u002Fa>\u003C\u002Fdd>\n\n          \n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>            \n\n       \u003Cdiv>\n    \u003Cdl>\n          \n          \u003Cdt>Issuing Office:\u003C\u002Fdt>\n        \n         \n          \u003Cdd>Center for Drug Evaluation and Research | CDER\u003C\u002Fdd>\n        \n         \n          \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n        \n        \n        \n        \n        \n    \u003C\u002Fdl>\n    \u003Cdl> \n      \n  \u003Cdiv>\n    \u003Cdiv>Secondary Issuing Offices\u003C\u002Fdiv>\n          \u003Cdiv>\n              \u003Cdiv>    \u003Cbr>\n    \n     \n        \u003Cdd>\u003Cp>\u003Cspan>United States\u003C\u002Fspan>\u003C\u002Fp>\u003C\u002Fdd>\n    \n    \n    \n    \n\u003C\u002Fdiv>\n              \u003C\u002Fdiv>\n      \u003C\u002Fdiv>\n\n    \u003C\u002Fdl>\n  \u003C\u002Fdiv>  \n      \n\u003C\u002Fdiv>\n\n \n\n \n\n\u003Chr>\n\n\u003Cp>\u003Cstrong>WARNING LETTER\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>February 6, 2024\u003Cbr>\n\u003Cbr>\nRE: 3007588545\u003C\u002Fp>\n\n\u003Cp>Dear Mr. Willimann:\u003C\u002Fp>\n\n\u003Cp>This letter concerns your firm’s distribution of the over-the-counter (OTC) drug product Nozin® Nasal Sanitizer®. The U.S. Food and Drug Administration (FDA) reviewed your website at the Internet address https:\u002F\u002Fwww.nozin.com\u002F on October 19 and October 20, 2023. We have also reviewed your social media websites at https:\u002F\u002Fwww.facebook.com\u002FNozinNasalSanitizer\u002Fwall\u002F and https:\u002F\u002Ftwitter.com\u002Fnozin; these websites direct consumers to your website https:\u002F\u002Fwww.nozin.com\u002F to purchase your products.\u003C\u002Fp>\n\n\u003Cp>Nozin® Nasal Sanitizer® is an unapproved new drug introduced or delivered for introduction into interstate commerce in violation of section 505(a) of the Federal Food &amp; Cosmetic Act (FD&amp;C Act,) 21 U.S.C. 355(a) and is misbranded under section 502(ee) of the FD&amp;C Act, 21 U.S.C. 352(ee). Introduction or delivery for introduction of such products into interstate commerce is prohibited under sections 301(d) and (a) of the FD&amp;C Act, 21 U.S.C. 331(d) and (a). These violations are described in more detail below.\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>Unapproved New Drug and Misbranded Drug Violations\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Nozin® Nasal Sanitizer® is a drug as defined by section 201(g)(1)(B) of the FD&amp;C Act, 21 U.S.C. 321(g)(1)(B), because it is intended for use in the diagnosis, cure, mitigation, treatment, or prevention of disease, and\u002For under section 201(g)(1)(C) of the FD&amp;C Act, 21 U.S.C. 321(g)(1)(C), because it is intended to affect the structure or any function of the body. Specifically, this product is intended for use as both a consumer and a health care topical antiseptic drug.\u003C\u002Fp>\n\n\u003Cp>Examples of claims observed on the Nozin® Nasal Sanitizer® labeling from your website and the social media websites listed above that provide evidence of the intended use (as defined in 21 CFR 201.128) of the product include, but may not be limited to, the following:\u003Cbr>\n“Nozin Nasal Sanitizer is an antiseptic that is used to kill pathogenic bacteria that are carried in the anterior nares (nasal vestibule). The vestibule is the single most abundant reservoir of antibiotic resistant and susceptible \u003Cem>Staph aureus\u003C\u002Fem> (MRSA &amp; MSSA) on the body and also harbors other microbial pathogens. The use of the Nasal Sanitizer® antiseptic also contributes to good nasal hygiene.” [from your website under Consumer FAQs https:\u002F\u002Fwww.nozin.com\u002Fconsumer-faq\u002F]\u003C\u002Fp>\n\n\u003Cp>“Nozin® Nasal Sanitizer® Nozaseptin® formula combines ethanol with antioxidant rich natural emollients. This provides a highly effective antiseptic for the nose in a pleasant and moisturizing application. No prescription needed.” “Helps reduce risk of infection.” [from your website under Buy Nozin https:\u002F\u002Fwww.nozin.com\u002Fproduct\u002Fnozin-nasal-sanitizer-12ml-bottle\u002F]\u003C\u002Fp>\n\n\u003Cp>“…Universal sustained nasal decolonization is now possible without some of the familiar constraints of antibiotics and iodine. Nozin® Infection Prevention Program helps safeguard your most vulnerable patients from the risks of MRSA colonization.” [from your website under product comparison https:\u002F\u002Fwww.nozin.com\u002Fnozin-nasal-sanitizer\u002F]\u003C\u002Fp>\n\n\u003Cp>“Nozin® Nasal Sanitizer® is specially formulated to effectively address nasal carriage of bacteria:\u003Cbr>\nEffective - kills 99.99% of germs and is clinically proven to decrease nasal bacteria carriage Safe, fast acting - the active ingredient is ethyl alcohol, a well-established, trusted, broad spectrum antiseptic 12-hour duration - soothing solution is well tolerated, safe for regular use and Nasal Sanitizer® effect lasts 12 hours” [from your website under How It Works https:\u002F\u002Fwww.nozin.com\u002Fhow-it-works\u002F]\u003C\u002Fp>\n\n\u003Cp>“The staff were very open to the idea of using Nozin, it meant we could quit using Mupirocin ointment. Patients could get swabbed for MRSA and did not have to stay a couple of hours for the MRSA results.” [from a testimonial on your website https:\u002F\u002Fwww.nozin.com\u002Fcustomer-testimonials\u002F]\u003C\u002Fp>\n\n\u003Cp>“We began the Nozin program right before COVID hit, it has been a game changer for us on saving on PPE, availability of patient rooms, and the patients have been better satisfied as they are not in isolation” [from a testimonial on your website https:\u002F\u002Fwww.nozin.com\u002Fcustomer-testimonials\u002F]\u003C\u002Fp>\n\n\u003Cp>“Now is the time to keep abreast of innovations in patient care to ensue optimal reduction of not only COVID-19 risk, but also HAI risk. With the support of hospital leadership, IP departments have long been early adopter of innovative products and practices in the interest of patient safety. Universal nasal and skin decolonization is an innovative approach with many advantages designed to reduce the transmission of MRSA and MSSA and associated infection risk in the interest of patient safety and cost containment.” [from a White Paper downloaded from your website under Healthcare Pros https:\u002F\u002Fwww.nozin.com\u002F: “Increased Risk of HAIs and the Case for Patient Decolonization in the COVID-19 Era for Healthcare Professionals”]\u003C\u002Fp>\n\n\u003Cp>“Independently conducted research studies of programs using Nozin Nasal Sanitizer antiseptic for nasal decolonization” led to a “100% reduction in total hip and total knee surgical site infections.” [from a post on your Facebook webpage, dated 9\u002F02\u002F2020, at https:\u002F\u002Fwww.facebook.com\u002FNozinNasalSanitizer\u002Fwall\u002F]\u003C\u002Fp>\n\n\u003Cp>“Road trip time. Consider packing Nozin Nasal Sanitizer antiseptic, #1 hospital-trusted product for daily nasal decolonization, contains alcohol which kills 99.99% of germs and keeps working for up to 12 hours.” [from a repost by you on your X (formerly Twitter) webpage, dated 7\u002F29\u002F2020, at https:\u002F\u002Ftwitter.com\u002Fnozin]\u003C\u002Fp>\n\n\u003Cp>Based on the above labeling claims, Nozin® Nasal Sanitizer® is intended for use as a consumer and a health care topical antiseptic product. As described below, this drug product is an unapproved new drug marketed in violation of sections 505(a) and 301(d) of the FD&amp;C Act, 21 U.S.C 355(a) and 331(d).\u003C\u002Fp>\n\n\u003Cp>A drug product is a “new drug” within the meaning of section 201(p) of the FD&amp;C Act, 21 U.S.C. 321(p), if it is not generally recognized as safe and effective (GRASE) for use under the conditions prescribed, recommended, or suggested in its labeling; and in general, a new drug may not be introduced or delivered for introduction into interstate commerce without an approved application from FDA in effect, as described in section 505(a) of the FD&amp;C Act, 21 U.S.C. 355(a), unless it is lawfully marketed under section 505G of the FD&amp;C Act or under other exceptions not applicable here. No FDA-approved application pursuant to section 505 of the FD&amp;C Act, 21 U.S.C. 355, is in effect for this drug product identified above.\u003Csup>\u003Cem>\u003Cstrong>1\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup>\u003C\u002Fp>\n\n\u003Cp>We note that OTC topical antiseptic products had been the subject of a rulemaking under the Agency’s OTC Drug Review. In particular, consumer topical antiseptics were addressed in a tentative final monograph (TFM) entitled “Topical Antimicrobial Drug Products for Over-the-Counter Human Use; Tentative Final Monograph for Health-Care Antiseptic Drug Products,” Proposed Rule, 59 FR 31402 (June 17, 1994) (1994 TFM), as further amended by “Safety and Effectiveness of Consumer Antiseptics; Topical Antimicrobial Drug Products for Over-the-Counter Human Use; Proposed Amendment of the Tentative Final Monograph; Reopening of Administrative Record,” Proposed Rule, 81 FR 42912 (June 30, 2016) (Consumer Antiseptic Rubs Proposed Rule). Over the course of these rulemakings, three active ingredients (benzalkonium chloride, ethyl alcohol (ethanol), and isopropyl alcohol) were classified as Category III for use in consumer antiseptic rub products, meaning that additional safety and effectiveness data are needed to support a determination that a drug product containing one of these active ingredients would be GRASE for use as a consumer antiseptic rub. Health care topical antiseptics were addressed in the 1994 TFM, as further amended by “Safety and Effectiveness of Health Care Antiseptics; Topical Antimicrobial Drug Products for Over-the-Counter Human Use; Proposed Amendment of the Tentative Final Monograph; Reopening of Administrative Record,” Proposed Rule, 80 FR 25166 (May 1, 2015) (Health Care Antiseptics Proposed Rule), and “Safety and Effectiveness of Health Care Antiseptics; Topical Antimicrobial Drug Products for Over-the-Counter Human Use,” Final Rule, 82 FR 60474 (December 20, 2017) (Health Care Antiseptics Final Rule). Over the course of these rulemakings, six active ingredients (benzalkonium chloride, benzethonium chloride, chloroxylenol, ethyl alcohol, isopropyl alcohol, and povidone-iodine) were classified as Category III for use in health care antiseptic products, meaning that additional safety and effectiveness data are needed to support a determination that a drug product containing one of these active ingredients would be GRASE for use as health care antiseptics, including patient antiseptic skin preparations.\u003C\u002Fp>\n\n\u003Cp>Section 505G of the FD&amp;C Act addresses nonprescription drugs marketed without an approved application. Under section 505G(a)(3) of the FD&amp;C Act, drugs that were classified as Category III for safety or effectiveness in a TFM that is the most recently applicable proposal or determination for such drug issued under 21 CFR Part 330 – and that were not classified as Category II for safety or effectiveness – are not required to have an approved application under section 505 in order to be marketed, as long as they are in conformity with the relevant conditions of use outlined in the applicable TFM and comply with all other applicable requirements.\u003C\u002Fp>\n\n\u003Cp>However, your Nozin® Nasal Sanitizer® product does not conform to the 1994 TFM, nor any other TFM, proposed rule, or final rule and does not meet the conditions under section 505G(a)(3) of the FD&amp;C Act for marketing without an approved application under section 505.\u003C\u002Fp>\n\n\u003Cp>Specifically, your labeling claims, suggesting that Nozin® Nasal Sanitizer® is effective in preventing infection or disease from the novel coronavirus that causes COVID-19 and other pathogenic organisms, such as Staphylococcus aureus that is either Methicillin-resistant (MRSA) or Methicillin-susceptible (MSSA), go beyond merely describing the general intended use of an antiseptic as set forth in the 1994 TFM.\u003Csup>\u003Cem>\u003Cstrong>2\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup> In addition, your labeling claims, suggesting that Nozin® Nasal Sanitizer® provides up to 12 hours of efficacy against serious-disease related pathogens, are not permitted under the 1994 TFM or any of the amendments to the TFM, as discussed above. Time-specific extended efficacy claims, especially when related to serious-disease related pathogens, may lead to a false sense of security for the general public that may result in infrequent hand washing or the substitution of these products for protective gloves and clothing, which are the principal methods for protecting against the spread of diseases caused by pathogenic microorganisms. This labeled intended use goes beyond merely describing the general intended use of topical antiseptics as set forth in the 1994 TFM and the amendments to the TFM, as discussed above.\u003C\u002Fp>\n\n\u003Cp>In addition, according to the product labeling, Nozin® Nasal Sanitizer® is intended to be applied inside the nostrils. Consumer and health care antiseptic products intended for administration inside the nostrils are not permitted under the 1994 TFM, as further amended by the Consumer Antiseptic Rubs Proposed Rule and the Health Care Antiseptics Proposed Rule.\u003Csup>\u003Cem>\u003Cstrong>3\u003C\u002Fstrong>\u003C\u002Fem>\u003C\u002Fsup>\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>Misbranded Drug Violations\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>Nozin® Nasal Sanitizer® is misbranded under section 502(ee) of the FD&amp;C Act, 21 U.S.C. 352(ee), because it is a nonprescription drug subject to section 505G of the FD&amp;C Act, 21 U.S.C. 355h, but does not comply with the requirements for marketing under that section and is not the subject of an application approved under section 505 of the FD&amp;C Act, 21 U.S.C. 355.\u003C\u002Fp>\n\n\u003Cp>The introduction or delivery for introduction of a misbranded drug into interstate commerce violates section 301(a) of the FD&amp;C Act, 21 U.S.C. 331(a).\u003C\u002Fp>\n\n\u003Cp>\u003Cstrong>Conclusion\u003C\u002Fstrong>\u003C\u002Fp>\n\n\u003Cp>The violations cited in this letter are not intended to be an all-inclusive list of violations that may exist in connection with your products. You are responsible for investigating and determining the causes of any violations and for preventing their recurrence or the occurrence of other violations. It is your responsibility to ensure that your firm complies with all requirements of federal law, including FDA regulations. Failure to adequately address any violations may result in legal action including, without limitation, seizure and injunction.\u003C\u002Fp>\n\n\u003Cp>This letter notifies you of our concerns and provides you an opportunity to address them. Please notify FDA in writing, within 15 working days of receipt of this letter, of the specific steps you have taken to correct any violations. Include an explanation of each step being taken to prevent the recurrence of violations, as well as copies of related documentation. If you believe that your products are not in violation of the FD&amp;C Act, include your reasoning and any supporting information for our consideration. If you cannot complete corrective action within fifteen working days, state the reason for the delay and the time within which you will complete the correction. Your response should be sent to U.S. Food and Drug Administration, CDER\u002FOC\u002FOffice of Unapproved Drugs and Labeling Compliance by email to FDAAdvisory@fda.hhs.gov and include your firm name in the subject line of your email.\u003C\u002Fp>\n\n\u003Cp>Sincerely,\u003Cbr>\n\u002FS\u002F\u003C\u002Fp>\n\n\u003Cp>CAPT Tina Smith\u003Cbr>\nOffice Director\u003Cbr>\nOffice of Unapproved Drugs and Labeling Compliance\u003Cbr>\nOffice of Compliance\u003Cbr>\nCenter for Drug Evaluation and Research\u003Cbr>\nFood and Drug Administration\u003C\u002Fp>\n\n\u003Cp>___________________\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>1\u003C\u002Fstrong>\u003C\u002Fem> FDA is not aware of any adequate and well-controlled clinical trials in the published literature that support a determination that your Nozin® Nasal Sanitizer® drug product is GRASE for use under the conditions prescribed, recommended, or suggested in its labeling.\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>2\u003C\u002Fstrong>\u003C\u002Fem> The 1994 TFM covers health care antiseptics that are indicated for use to help reduce bacteria that can potentially cause disease and health care and consumer antiseptics that are indicated to decrease bacteria on the skin. 59 FR at 31443.\u003C\u002Fp>\n\n\u003Cp>\u003Cem>\u003Cstrong>3\u003C\u002Fstrong>\u003C\u002Fem> The 2016 Consumer Antiseptic Rubs Proposed Rule covered consumer antiseptic products intended for use without water. Under the 1994 TFM, as amended by the 2016 Consumer Antiseptic Rubs Proposed Rule, only consumer topical antiseptic products intended for use on the hands without water are permitted. Products intended for other areas of the body such as inside the nose are not permitted. Under the 1994 TFM, as amended by the 2015 Health Care Antiseptics Proposed Rule and 2017 Health Care Antiseptics Final Rule, certain health care topical antiseptic products intended for use without water, including patient antiseptic skin preparations, are permitted. Health care antiseptic products intended for use inside the nose are not permitted because the inside of the nose is a mucous membrane.\u003C\u002Fp>\n\n\n\n\n\n\n\n              \n                                            \n              \n            ","Product:\n\nDrugs\n\nRecipient:\n\nRecipient Name\n\nJohn Willimann\n\nRecipient Title\n\nPresident\n\nGlobal Life Technologies Corp.\n\n4608 N. Park Avenue, 2nd floor\n\nChevy Chase, MD 20815\n\nUnited States\n\njohn@nozin.com\n\nIssuing Office:\n\nCenter for Drug Evaluation and Research | CDER\n\nUnited States\n\nSecondary Issuing Offices\n\nUnited States\n\nWARNING LETTER\n\nFebruary 6, 2024\n\nRE: 3007588545\n\nDear Mr. Willimann:\n\nThis letter concerns your firm’s distribution of the over-the-counter (OTC) drug product Nozin® Nasal Sanitizer®. The U.S. Food and Drug Administration (FDA) reviewed your website at the Internet address https:\u002F\u002Fwww.nozin.com\u002F on October 19 and October 20, 2023. We have also reviewed your social media websites at https:\u002F\u002Fwww.facebook.com\u002FNozinNasalSanitizer\u002Fwall\u002F and https:\u002F\u002Ftwitter.com\u002Fnozin; these websites direct consumers to your website https:\u002F\u002Fwww.nozin.com\u002F to purchase your products.\n\nNozin® Nasal Sanitizer® is an unapproved new drug introduced or delivered for introduction into interstate commerce in violation of section 505(a) of the Federal Food & Cosmetic Act (FD&C Act,) 21 U.S.C. 355(a) and is misbranded under section 502(ee) of the FD&C Act, 21 U.S.C. 352(ee). Introduction or delivery for introduction of such products into interstate commerce is prohibited under sections 301(d) and (a) of the FD&C Act, 21 U.S.C. 331(d) and (a). These violations are described in more detail below.\n\nUnapproved New Drug and Misbranded Drug Violations\n\nNozin® Nasal Sanitizer® is a drug as defined by section 201(g)(1)(B) of the FD&C Act, 21 U.S.C. 321(g)(1)(B), because it is intended for use in the diagnosis, cure, mitigation, treatment, or prevention of disease, and\u002For under section 201(g)(1)(C) of the FD&C Act, 21 U.S.C. 321(g)(1)(C), because it is intended to affect the structure or any function of the body. Specifically, this product is intended for use as both a consumer and a health care topical antiseptic drug.\n\nExamples of claims observed on the Nozin® Nasal Sanitizer® labeling from your website and the social media websites listed above that provide evidence of the intended use (as defined in 21 CFR 201.128) of the product include, but may not be limited to, the following:\n\n“Nozin Nasal Sanitizer is an antiseptic that is used to kill pathogenic bacteria that are carried in the anterior nares (nasal vestibule). The vestibule is the single most abundant reservoir of antibiotic resistant and susceptible Staph aureus (MRSA & MSSA) on the body and also harbors other microbial pathogens. The use of the Nasal Sanitizer® antiseptic also contributes to good nasal hygiene.” [from your website under Consumer FAQs https:\u002F\u002Fwww.nozin.com\u002Fconsumer-faq\u002F]\n\n“Nozin® Nasal Sanitizer® Nozaseptin® formula combines ethanol with antioxidant rich natural emollients. This provides a highly effective antiseptic for the nose in a pleasant and moisturizing application. No prescription needed.” “Helps reduce risk of infection.” [from your website under Buy Nozin https:\u002F\u002Fwww.nozin.com\u002Fproduct\u002Fnozin-nasal-sanitizer-12ml-bottle\u002F]\n\n“…Universal sustained nasal decolonization is now possible without some of the familiar constraints of antibiotics and iodine. Nozin® Infection Prevention Program helps safeguard your most vulnerable patients from the risks of MRSA colonization.” [from your website under product comparison https:\u002F\u002Fwww.nozin.com\u002Fnozin-nasal-sanitizer\u002F]\n\n“Nozin® Nasal Sanitizer® is specially formulated to effectively address nasal carriage of bacteria:\n\nEffective - kills 99.99% of germs and is clinically proven to decrease nasal bacteria carriage Safe, fast acting - the active ingredient is ethyl alcohol, a well-established, trusted, broad spectrum antiseptic 12-hour duration - soothing solution is well tolerated, safe for regular use and Nasal Sanitizer® effect lasts 12 hours” [from your website under How It Works https:\u002F\u002Fwww.nozin.com\u002Fhow-it-works\u002F]\n\n“The staff were very open to the idea of using Nozin, it meant we could quit using Mupirocin ointment. Patients could get swabbed for MRSA and did not have to stay a couple of hours for the MRSA results.” [from a testimonial on your website https:\u002F\u002Fwww.nozin.com\u002Fcustomer-testimonials\u002F]\n\n“We began the Nozin program right before COVID hit, it has been a game changer for us on saving on PPE, availability of patient rooms, and the patients have been better satisfied as they are not in isolation” [from a testimonial on your website https:\u002F\u002Fwww.nozin.com\u002Fcustomer-testimonials\u002F]\n\n“Now is the time to keep abreast of innovations in patient care to ensue optimal reduction of not only COVID-19 risk, but also HAI risk. With the support of hospital leadership, IP departments have long been early adopter of innovative products and practices in the interest of patient safety. Universal nasal and skin decolonization is an innovative approach with many advantages designed to reduce the transmission of MRSA and MSSA and associated infection risk in the interest of patient safety and cost containment.” [from a White Paper downloaded from your website under Healthcare Pros https:\u002F\u002Fwww.nozin.com\u002F: “Increased Risk of HAIs and the Case for Patient Decolonization in the COVID-19 Era for Healthcare Professionals”]\n\n“Independently conducted research studies of programs using Nozin Nasal Sanitizer antiseptic for nasal decolonization” led to a “100% reduction in total hip and total knee surgical site infections.” [from a post on your Facebook webpage, dated 9\u002F02\u002F2020, at https:\u002F\u002Fwww.facebook.com\u002FNozinNasalSanitizer\u002Fwall\u002F]\n\n“Road trip time. Consider packing Nozin Nasal Sanitizer antiseptic, #1 hospital-trusted product for daily nasal decolonization, contains alcohol which kills 99.99% of germs and keeps working for up to 12 hours.” [from a repost by you on your X (formerly Twitter) webpage, dated 7\u002F29\u002F2020, at https:\u002F\u002Ftwitter.com\u002Fnozin]\n\nBased on the above labeling claims, Nozin® Nasal Sanitizer® is intended for use as a consumer and a health care topical antiseptic product. As described below, this drug product is an unapproved new drug marketed in violation of sections 505(a) and 301(d) of the FD&C Act, 21 U.S.C 355(a) and 331(d).\n\nA drug product is a “new drug” within the meaning of section 201(p) of the FD&C Act, 21 U.S.C. 321(p), if it is not generally recognized as safe and effective (GRASE) for use under the conditions prescribed, recommended, or suggested in its labeling; and in general, a new drug may not be introduced or delivered for introduction into interstate commerce without an approved application from FDA in effect, as described in section 505(a) of the FD&C Act, 21 U.S.C. 355(a), unless it is lawfully marketed under section 505G of the FD&C Act or under other exceptions not applicable here. No FDA-approved application pursuant to section 505 of the FD&C Act, 21 U.S.C. 355, is in effect for this drug product identified above.1\n\nWe note that OTC topical antiseptic products had been the subject of a rulemaking under the Agency’s OTC Drug Review. In particular, consumer topical antiseptics were addressed in a tentative final monograph (TFM) entitled “Topical Antimicrobial Drug Products for Over-the-Counter Human Use; Tentative Final Monograph for Health-Care Antiseptic Drug Products,” Proposed Rule, 59 FR 31402 (June 17, 1994) (1994 TFM), as further amended by “Safety and Effectiveness of Consumer Antiseptics; Topical Antimicrobial Drug Products for Over-the-Counter Human Use; Proposed Amendment of the Tentative Final Monograph; Reopening of Administrative Record,” Proposed Rule, 81 FR 42912 (June 30, 2016) (Consumer Antiseptic Rubs Proposed Rule). Over the course of these rulemakings, three active ingredients (benzalkonium chloride, ethyl alcohol (ethanol), and isopropyl alcohol) were classified as Category III for use in consumer antiseptic rub products, meaning that additional safety and effectiveness data are needed to support a determination that a drug product containing one of these active ingredients would be GRASE for use as a consumer antiseptic rub. Health care topical antiseptics were addressed in the 1994 TFM, as further amended by “Safety and Effectiveness of Health Care Antiseptics; Topical Antimicrobial Drug Products for Over-the-Counter Human Use; Proposed Amendment of the Tentative Final Monograph; Reopening of Administrative Record,” Proposed Rule, 80 FR 25166 (May 1, 2015) (Health Care Antiseptics Proposed Rule), and “Safety and Effectiveness of Health Care Antiseptics; Topical Antimicrobial Drug Products for Over-the-Counter Human Use,” Final Rule, 82 FR 60474 (December 20, 2017) (Health Care Antiseptics Final Rule). Over the course of these rulemakings, six active ingredients (benzalkonium chloride, benzethonium chloride, chloroxylenol, ethyl alcohol, isopropyl alcohol, and povidone-iodine) were classified as Category III for use in health care antiseptic products, meaning that additional safety and effectiveness data are needed to support a determination that a drug product containing one of these active ingredients would be GRASE for use as health care antiseptics, including patient antiseptic skin preparations.\n\nSection 505G of the FD&C Act addresses nonprescription drugs marketed without an approved application. Under section 505G(a)(3) of the FD&C Act, drugs that were classified as Category III for safety or effectiveness in a TFM that is the most recently applicable proposal or determination for such drug issued under 21 CFR Part 330 – and that were not classified as Category II for safety or effectiveness – are not required to have an approved application under section 505 in order to be marketed, as long as they are in conformity with the relevant conditions of use outlined in the applicable TFM and comply with all other applicable requirements.\n\nHowever, your Nozin® Nasal Sanitizer® product does not conform to the 1994 TFM, nor any other TFM, proposed rule, or final rule and does not meet the conditions under section 505G(a)(3) of the FD&C Act for marketing without an approved application under section 505.\n\nSpecifically, your labeling claims, suggesting that Nozin® Nasal Sanitizer® is effective in preventing infection or disease from the novel coronavirus that causes COVID-19 and other pathogenic organisms, such as Staphylococcus aureus that is either Methicillin-resistant (MRSA) or Methicillin-susceptible (MSSA), go beyond merely describing the general intended use of an antiseptic as set forth in the 1994 TFM.2 In addition, your labeling claims, suggesting that Nozin® Nasal Sanitizer® provides up to 12 hours of efficacy against serious-disease related pathogens, are not permitted under the 1994 TFM or any of the amendments to the TFM, as discussed above. Time-specific extended efficacy claims, especially when related to serious-disease related pathogens, may lead to a false sense of security for the general public that may result in infrequent hand washing or the substitution of these products for protective gloves and clothing, which are the principal methods for protecting against the spread of diseases caused by pathogenic microorganisms. This labeled intended use goes beyond merely describing the general intended use of topical antiseptics as set forth in the 1994 TFM and the amendments to the TFM, as discussed above.\n\nIn addition, according to the product labeling, Nozin® Nasal Sanitizer® is intended to be applied inside the nostrils. Consumer and health care antiseptic products intended for administration inside the nostrils are not permitted under the 1994 TFM, as further amended by the Consumer Antiseptic Rubs Proposed Rule and the Health Care Antiseptics Proposed Rule.3\n\nMisbranded Drug Violations\n\nNozin® Nasal Sanitizer® is misbranded under section 502(ee) of the FD&C Act, 21 U.S.C. 352(ee), because it is a nonprescription drug subject to section 505G of the FD&C Act, 21 U.S.C. 355h, but does not comply with the requirements for marketing under that section and is not the subject of an application approved under section 505 of the FD&C Act, 21 U.S.C. 355.\n\nThe introduction or delivery for introduction of a misbranded drug into interstate commerce violates section 301(a) of the FD&C Act, 21 U.S.C. 331(a).\n\nConclusion\n\nThe violations cited in this letter are not intended to be an all-inclusive list of violations that may exist in connection with your products. You are responsible for investigating and determining the causes of any violations and for preventing their recurrence or the occurrence of other violations. It is your responsibility to ensure that your firm complies with all requirements of federal law, including FDA regulations. Failure to adequately address any violations may result in legal action including, without limitation, seizure and injunction.\n\nThis letter notifies you of our concerns and provides you an opportunity to address them. Please notify FDA in writing, within 15 working days of receipt of this letter, of the specific steps you have taken to correct any violations. Include an explanation of each step being taken to prevent the recurrence of violations, as well as copies of related documentation. If you believe that your products are not in violation of the FD&C Act, include your reasoning and any supporting information for our consideration. If you cannot complete corrective action within fifteen working days, state the reason for the delay and the time within which you will complete the correction. Your response should be sent to U.S. Food and Drug Administration, CDER\u002FOC\u002FOffice of Unapproved Drugs and Labeling Compliance by email to FDAAdvisory@fda.hhs.gov and include your firm name in the subject line of your email.\n\nSincerely,\n\n\u002FS\u002F\n\nCAPT Tina Smith\n\nOffice Director\n\nOffice of Unapproved Drugs and Labeling Compliance\n\nOffice of Compliance\n\nCenter for Drug Evaluation and Research\n\nFood and Drug Administration\n\n___________________\n\n1 FDA is not aware of any adequate and well-controlled clinical trials in the published literature that support a determination that your Nozin® Nasal Sanitizer® drug product is GRASE for use under the conditions prescribed, recommended, or suggested in its labeling.\n\n2 The 1994 TFM covers health care antiseptics that are indicated for use to help reduce bacteria that can potentially cause disease and health care and consumer antiseptics that are indicated to decrease bacteria on the skin. 59 FR at 31443.\n\n3 The 2016 Consumer Antiseptic Rubs Proposed Rule covered consumer antiseptic products intended for use without water. Under the 1994 TFM, as amended by the 2016 Consumer Antiseptic Rubs Proposed Rule, only consumer topical antiseptic products intended for use on the hands without water are permitted. Products intended for other areas of the body such as inside the nose are not permitted. Under the 1994 TFM, as amended by the 2015 Health Care Antiseptics Proposed Rule and 2017 Health Care Antiseptics Final Rule, certain health care topical antiseptic products intended for use without water, including patient antiseptic skin preparations, are permitted. Health care antiseptic products intended for use inside the nose are not permitted because the inside of the nose is a mucous membrane.","Global Life Technologies Corp.","global-life-technologies-corp-674279-02062024","https:\u002F\u002Fwww.fda.gov\u002Finspections-compliance-enforcement-and-criminal-investigations\u002Fwarning-letters\u002Fglobal-life-technologies-corp-674279-02062024","2026-10-26T08:08:46.581551+00:00","2024-02-13","674279","John Willimann","2026-08-20T00:18:09.319+00:00","2024-02-06",8,{"510k":172,"classification":173,"enforcement":174,"event":175,"event_backfill":176,"pma":177,"warning_letter":178},"2026-11-16T02:00:55.89+00:00","2026-11-16T02:00:41.999+00:00","2026-11-16T02:00:49.415+00:00","2026-11-18T04:00:44.748+00:00","2026-09-07T05:17:28.839+00:00","2026-11-16T02:01:03.155+00:00","2026-11-17T01:02:55.859+00:00"]